含质粒复制起始区ori44的苏云金芽胞杆菌解离载体的构建

将苏云金芽胞杆菌转座子Tn4430的解离酶识别位点res分别插入克隆载体pRSET B和pUC19得到质粒pBMB1201和pBMB1202。这两个质粒分别经BamHI/Hin dⅢ和EcoRI/HindⅢ双酶切回收含res位点的小DNA片段,与穿梭载体pHT3101经EcoRI/HindⅢ双酶切后加收的含大肠杆菌复制起始区、氨苄青霉素抗性基因和红霉素抗性基因的3．3kb片段连接,获得重组质粒pBMB1203。封闭pBMB1203两res位点外的BamHI和EcoRI位点后,得到解离载体pBMB1204。将来源于苏云金芽胞杆菌库斯塔克亚种YBT－1520的质粒复制起始区ori44片段插入pBMB1204的两res位点之间,得到解离穿梭载体pBMB1205。该解离载体插入壮观霉素抗性基因后电转化无晶体突变株,在辅助质粒所提供的解离酶作用下可发生解离消除抗性基因,解离频率为100％,解离后的质粒稳定性为93％。利用解离穿梭载体pBMB1205可在用抗性筛选到转化子后特定消除抗性标记基因和其它非苏云金芽胞杆菌DNA片段。     

Cloning the alpha-amylase gene of Bacillus amyloliquefaciens in cyanobacteria cells

The recombinant plasmids of pIAH4amy series were constructed containing the alpha-amylase gene of Bacillus amyloliquefaciens A50 with its own promoter and leading sequence within an integrative vector plasmid pIAH4 (CmR) for cyanobacterium Anacystis nidulans R2. At Anacystis nidulans transformation the hybrid plasmids integrate into cyanobacterium chromosome with high efficiency and all CmR transformants produce alpha-amylase. Expression of bacillar alpha-amylase gene in cyanobacterium cells is independent of the cloned gene orientation in the vector plasmid. Secretion of alpha-amylase into the cyanobacterial periplasm has been demonstrated.     

Versatile shuttle cloning vectors for the unicellular cyanobacterium Anacystis nidulans R2

Abstract 3 new shuttle cloning vectors for gene transfer into Escherichia coli and Anacystis nidulans have been constructed by utilizing the cyanobacterial origin of replication of the small plasmid pANS from A. nidulans . 2 of these new vectors, pXB7 (pDPL13 derivative) and pECAN8 (pUC8 derivative), convey ampicillin resistance, and transform A. nidulans with relatively high frequencies. Vector pXB7 has 10 unique cloning sites; pECAN8 contains 4 cloning sites within the lacZ gene permitting rapid detection of DNA inserts in the presence of Xgal. The third vector, pKBX, has a lower transformation frequency but adds kanamycin resistance as a selectable gene for shuttle vectors of cyanobacteria.     

A new approach for molecular cloning in cyanobacteria: cloning of an Anacystis nidulans met gene using a Tn901-induced mutant

A new strategy for molecular cloning in the cyanobacterium Anacystis nidulans R-2 is described. This strategy involved the use of a transposon and was developed for the cloning of a gene encoding methionine biosynthesis. A met::Tn901 mutant was isolated. Chromosomal DNA fragments were cloned in the Escherichia coli plasmid vector pACYC184. A recombinant plasmid carrying the inactivated met::Tn901 gene was selected after transformation to E. coli. The cloned met::Tn901 DNA fragment was used as a probe to select the corresponding A. nidulans R-2 wild-type met gene from a gene library prepared in E. coli, using the newly constructed shuttle cosmid vector pPUC29. When transformed into A. nidulans Met- mutants, this cloned gene allowed the mutants to grow prototrophically.     

Instability of Tn5 inserts in cyanobacterial cloning vectors.

Transposon Tn5 was used to produce random insertions in two hybrid cloning vectors for the unicellular cyanobacterium Anacystis nidulans. The transposon-containing plasmids were used to localize essential replication functions and to characterize the stability of large inserts in these vectors. The effect of the insertions on plasmid function was tested by transformation into a derivative of A. nidulans that had been cured of the endogenous plasmid used to construct the vectors. A region of approximately 4 kilobases was essential for successful plasmid transformation and replication. This region has also been shown to be involved in plasmid replication by deletion analysis. High rates of excision of Tn5 inserts within this region and restoration of normal replication function were observed when transformants were selected by using a resistance marker outside the replication region in the absence of selection for the transposon-coded kanamycin resistance. Transposon inserts outside this region were not deleted.     

Hybrid vectors for the cyanobacterium Anacystis nidulans R2, containing the plasmid pUB110 from Staphylococcus aureus

The recombinant vector plasmids were constructed having the DNA of pUB110 plasmid (4,5 kb, KmR) from Staphylococcus aureus inserted into the cryptic plasmids pANS (8 Kb) and pANL (48,5 kb) of cyanobacterium Anacystis nidulans R2. The hybrid plasmids transform cyanobacterial cells to Km-resistance with high efficiency. The plasmid pBS20, containing the complete sequence of pANS and pUB110 DNA, transforms Bacillus subtilis rec E4 protoplasts being, however, unstable in bacilli cells and disintegrates deriving a parent pUB110 plasmid.     

Molecular cloning and characterization of form I antigen genes of Shigella sonnei.

Sau3AI-generated DNA fragments of the Shigella sonnei large plasmid encoding the form I antigen were cloned into Escherichia coli with cosmid vector pHSG262. One resulting plasmid, designated pJK1137, was studied further. Restriction endonuclease mapping and analysis of transposon Tn3 insertion mutants demonstrated that the form I antigen genes were located within a region of about 12.6 kb consisting of the two contiguous HindIII fragments of 1.26 kb and 12.4 kb. The results of complementation studies between Tn3 insertion mutants of pJK1137 and recombinant plasmids carrying different parts of the form I antigen genes indicated that the 12.6 kb DNA sequence contained at least four gene clusters, regions A, B, C and D. Analysis of radioactively labelled proteins in minicells demonstrated that the DNA sequence of about 12.6 kb coded for at least four specific proteins of 42, 23, 48 and 39 kDa. The former two were coded by region A, the latter two by region D.     

Conjugal transfer of antibiotic resistance factors in Bacteroides fragilis: the btgA and btgB genes of plasmid pBFTM10 are required for its transfer from Bacteroides fragilis and for its mobilization by IncP beta plasmid R751 in Escherichia coli.

Transferable plasmids play an important role in the dissemination of clindamycin-erythromycin resistance in Bacteroides fragilis. We previously described the isolation and properties of pBFTM10, a 14.9-kb ClnR transfer factor from B. fragilis TMP10. We also reported the isolation of a transfer-deficient deletion derivative of pBFTM10 contained in the B. fragilis-Escherichia coli shuttle vector pGAT400. In the present study we used pGAT400 and a similar shuttle vector, pGAT550, to characterize and sequence a region of pBFTM10 required for its transfer from B. fragilis to B. fragilis or E. coli recipients and for its mobilization by the broad-host-range plasmid R751 from E. coli donors to E. coli recipients. Deletion of certain BglII restriction fragments from pBFTM10 resulted in partial or complete loss of transfer ability. Tn1000 insertions into this same region also resulted in altered transfer properties. We used the sites of Tn1000 insertions to determine the DNA sequence of the transfer region. Two potential open reading frames encoding proteins of 23.2 and 33.8 kDa, corresponding to two genes, btgA or btgB, were identified in the sequence. Tn1000 insertions within btgA or btgB or deletion of all or portions of btgA or btgB resulted in either a transfer deficiency or greatly reduced transfer from B. fragilis donors and alterations in mobilization by R751 in E. coli. A potential oriT sequence showing similarity in organization to the oriT regions of the IncP plasmids was also detected. Thus, pBFTM10 encodes and requires at least two proteins necessary for efficient transfer from B. fragilis. These same functions are expressed in E. coli and are required for mobilization by R751.     

Physical and genetic organization of the plasmid R15

The conjugative IncN plasmid R15 (SmrSurHgr, 62.3 kb) is cleaved by the hexanucleotide-specific endonucleases BglII, HindIII, EcoRI, BamHI, SmaI, SalI, PstI and XhoI into 9, 9, 6, 5, 4, 4, 4 and 2 fragments, respectively. The restriction sites were located on the physical map of the R15 genome. Distribution of the cleavage sites is strongly asymmetric. 28 of 32 sites for BamHI, EcoRI, HindIII, SalI, SmaI and PstI were located close to or within the sequences of transposable elements Tn2353 and Tn2354. According to the results of analysis of R15::Tn1756 deletion derivatives and recombinant plasmids harboring fragments of R15, the genetic determinants for resistance to Sm, Su and Hg were mapped, as well as the regions necessary for EcoRII restriction--modification and for plasmid replication and conjugation. The features of physical and genetic structures of R15 and other IncN plasmids are discussed.     

Shuttle cloning vectors for the cyanobacterium Anacystis nidulans.

Hybrid plasmids capable of acting as shuttle cloning vectors in Escherichia coli and the cyanobacterium Anacystis nidulans R2 were constructed by in vitro ligation. DNA from the small endogenous plasmid of A. nidulans was combined with two E. coli vectors, pBR325 and pDPL13, to create vectors containing either two selectable antibiotic resistance markers or a single marker linked to a flexible multisite polylinker. Nonessential DNA was deleted from the polylinker containing plasmid pPLAN B2 to produce a small shuttle vector carrying part of the polylinker (pCB4). The two polylinker-containing shuttle vectors, pPLAN B2 and pCB4, transform both E. coli and A. nidulans efficiently and provide seven and five unique restriction enzyme sites, respectively, for the insertion of a variety of DNA fragments. The hybrid plasmid derived from pBR325 (pECAN1) also transforms both E. coli and A. nidulans, although at a lower frequency, and contains two unique restriction enzyme sites.     

Analysis of a region from the bacteriophage resistance plasmid pCI528 involved in its conjugative mobilization between Lactococcus strains.

A 10-kb HindIII fragment of pCI528 cloned into the nonconjugative shuttle vector pCI3340 could be transferred by conjugative mobilization from Lactococcus lactis subsp. lactis MG1363, whereas other HindIII fragments of pCI528 or the vector alone were nonmobilizable. Subcloning of this 10-kb region identified a 4.4-kb BglII-EcoRI fragment which contained all the DNA essential for transfer. Sequence analysis of a 2-kb region within this 4.4 kb-segment revealed a region rich in inverted repeats and two potential overlapping open reading frames, one of which demonstrated homology to mobilization proteins of two nonconjugative staphylococcal plasmids.     

Physical and genetic structure of the IncN plasmid R15

Restriction sites for seven hexanucleotide-specific endonucleases were located on the map of the conjugative IncN plasmid R15 (SmrSurHgr, 62.3 kb). The distribution of the cleavage sites is strongly asymmetric. Twenty-eight of thirty-four sites for BamHI, EcoRI, HindIII, SalI, SmaI, and PstI were located close to or within the sequences of an IS5-like element and the transposons Tn2353 and Tn2354. By analysis of R15::Tn1756 deletion derivatives and recombinant plasmids harboring R15 fragments, the genetic determinants for the streptomycin, sulfonamide, and mercury resistances were mapped, as well as the regions necessary for EcoRII restriction-modification and for plasmid replication and conjugation. The features of physical and genetic structures of the plasmid R15 and other IncN plasmids are discussed.     

Analysis of the ruv locus of Escherichia coli K-12 and identification of the gene product.

The ruv gene of Escherichia coli, which is associated with inducible mechanisms of DNA repair and recombination, has been cloned into the low-copy plasmid vector pHSG415. The recombinant plasmid pPVA101 fully complements the DNA repair-deficient phenotype of ruv mutants. Restriction endonuclease analysis of this plasmid revealed a 10.6-kilobase (kb) HindIII DNA insert which contained a 7.7-kb PstI fragment identified as being from the chromosomal ruv region. Deletion analysis and Tn1000 insertional inactivation of ruv function located the ruv coding region to a 2.2-kb section of the cloned DNA fragment. A comparison of the proteins encoded by ruv wild-type and mutant plasmids identified the gene product as a protein of molecular weight 41,000.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.     

Tn1000-mediated insertion mutagenesis of the histidine utilization (hut) gene cluster from Klebsiella aerogenes: genetic analysis of hut and unusual target specificity of Tn1000.

The histidine utilization (hut) genes from Klebsiella aerogenes were cloned in both orientations into the HindIII site of plasmid pBR325, and the two resulting plasmids, pCB120 and pCB121, were subjected to mutagenesis with Tn1000. The insertion sites of Tn1000 into pCB121 were evenly distributed throughout the plasmid, but the insertion sites into pCB120 were not. There was a large excess of Tn1000 insertions in the "plus" or gamma delta orientation in a small, ca. 3.5-kilobase region of the plasmid. Genetic analysis of the Tn1000 insertions in pCB120 and pCB121 showed that the hutUH genes form an operon transcribed from hutU and that the hutC gene (encoding the hut-specific repressor) is independently transcribed from its own promoter. The hutIG cluster appears not to form an operon. Curiously, insertions in hutI gave two different phenotypes in complementation tests against hutG504, suggesting either that hutI contains two functionally distinct domains or that there may be another undefined locus within the hut cluster. The set of Tn1000 insertions allowed an assignment of the gene boundaries within the hut cluster, and minicell analysis of the polypeptides expressed from plasmids carrying insertions in the hut genes showed that the hutI, hutG, hutU, and hutH genes encode polypeptides of 43, 33, 57, and 54 kilodaltons, respectively.     

Transformation of Mycoplasma pulmonis: demonstration of homologous recombination, introduction of cloned genes, and preliminary description of an integrating shuttle system

The transposons Tn916 and Tn4001 and a series of integrating plasmids derived from their antibiotic resistance genes were used to examine polyethylene glycol-mediated transformation of Mycoplasma pulmonis. Under optimal conditions, Tn916 and Tn4001 could be introduced into M. pulmonis at frequencies of 1 x 10(-6) and 5 x 10(-5) per CFU, respectively. Integrating plasmids were constructed with the cloned antibiotic resistance determinants of Tn916 and Tn4001, a pMB1-derived plasmid replicon, and mycoplasmal chromosomal DNA and were used to examine recombinational events after transformation into M. pulmonis. Under optimal conditions, chromosomal integrations could be recovered at a frequency of 1 x 10(-4) to 1 x 10(-6) per CFU, depending on the size and nature of the chromosomal insert and the parental plasmid. Integrated plasmids were stable in the absence of selection and could be rescued in Escherichia coli along with adjacent mycoplasma DNA. These studies provide the first direct evidence of a recombination system in the Mollicutes and describe the first E. coli-M. pulmonis shuttle vectors.     

Easy cloning of mini-Tn10 insertions from the Bacillus subtilis chromosome.

Delivery vectors for mini-Tn10 transposons function in Bacillus subtilis (M. A. Petit, C. Bruand, L. Janniére, and S. D. Ehrlich, J. Bacteriol. 172:6736-6740, 1990). Using this system, we identified a new gene (sytA) whose inactivation affected regulation of genes of sucrose metabolism. For cloning the sytA::Tn10 insertion in Escherichia coli, we developed a methodology similar to that commonly used for B. subtilis Tn917 insertions. We constructed a plasmid which can be used to insert (by in vivo recombination) a ColE1 origin linked to a spectinomycin resistance gene (ori-spc element) into mini-Tn10 transposons inserted into the B. subtilis chromosome. DNA extracted from a sytA::Tn10::ori-spc transformant was cut with restriction enzymes that do not cut into the Tn10::ori-spc sequence; plasmids containing the sytA::Tn10 insertion were cloned by self-ligation, followed by transformation of E. coli. To obtain the wild-type sytA region, one of these plasmids was ligated with an E. coli-B. subtilis shuttle vector conferring erythromycin resistance, and the hybrid was used to transform the wild-type B. subtilis strain. Erythromycin-resistant transformants, detected as spectinomycin sensitive, resulted from conversion of the insertion mutation by the resident wild-type locus. The shuttle plasmid containing the wild-type locus could then be recovered in E. coli.