Sedimentation velocity analysis of flexible macromolecules: self-association and tangling of amyloid fibrils

A novel bead modeling technique has been developed for the analysis of the sedimentation velocity behavior of flexible fibrils. The method involves the generation of a family of bead models representing a sample of the conformations available to the molecule and the calculation of the sedimentation coefficients of these models by established techniques. This approach has been used to investigate the size distribution of amyloid fibrils formed by human apolipoprotein C-II (apoC-II). ApoC-II fibrils have a simple and homogeneous ribbon morphology with no evidence of amorphous aggregation. Freshly prepared apoC-II forms fibrils with systematically larger sedimentation coefficients upon increasing protein concentration (modes of 100, 300, and 800 for apoC-II concentrations of 0.3, 0.7, and 1.0 mg/mL, respectively). The sedimentation coefficient distributions are not affected by rotor speed, and are not significantly changed by dilution once the fibrils are formed. The kinetics of aggregation (1 mg/mL apoC-II) as assessed using thioflavin T and preparative pelleting assays reveal that monomeric apoC-II is depleted after approximately 12 h incubation at room temperature. In contrast, the sedimentation coefficient distribution of fibrils continues to grow larger over a period of 48 h to an average value of 800 S. Calculations using the bead modeling procedure suggest maximum sedimentation coefficients for individual apoC-II fibrils to be around 100 S. The larger experimentally observed sedimentation coefficients for apoC-II fibrils indicate an extensive and time-dependent tangling or association of the fibrils to form specific networks.     

Controlling the dimensions of amyloid fibrils: toward homogenous components for bionanotechnology

Amyloid fibrils have been recognized as having potential in a variety of bionanotechnological applications. However, realization of these applications is constrained by a lack of control over morphology and alignment, both crucial for potential end uses. This article focuses on the use of growth and storage conditions to control the length of amyloid fibrils formed from bovine insulin, with length distributions constructed from transmission electron microscopy (TEM) images. Growth temperature, pH, protein concentration, and storage conditions were examined and were seen to offer a range of conditions that favor different length distribution. The use of amyloid fibrils as nanowires is one area where control of fibril dimensions is desirable, for experimental setup and endpoint applications. The conductive properties of fibrils formed from bovine insulin are presented, with these insulin fibrils being shown to have high resistivity in their unmodified state, with current values in the nanoamp range. These low current values can be increased via modification, or the fibrils used in their native state in applications where low current values are desirable. These findings, coupled with the ability to predict and select for various insulin amyloid fibril dimensions, enhances their utility as nanomaterials.     

Plasticity of amyloid fibrils

In experiments designed to characterize the basis of amyloid fibril stability through mutational analysis of the Abeta (1-40) molecule, fibrils exhibit consistent, significant structural malleability. In these results, and in other properties, amyloid fibrils appear to more resemble plastic materials generated from synthetic polymers than globular proteins. Thus, like synthetic polymers and plastics, amyloid fibrils exhibit both polymorphism, the ability of one polypeptide to form aggregates of different morphologies, and isomorphism, the ability of different polypeptides to grow into a fibrillar amyloid morphology. This view links amyloid with the prehistorical and 20th century use of proteins as starting materials to make films, fibers, and plastics, and with the classic protein fiber stretching experiments of the Astbury group. Viewing amyloids from the point of view of the polymer chemist may shed new light on a number of issues, such as the role of protofibrils in the mechanism of amyloid formation, the biological potency of fibrils, and the prospects for discovering inhibitors of amyloid fibril formation.     

Structure-activity relationship of amyloid fibrils

Protein aggregation is a process in which proteins self-associate into imperfectly ordered macroscopic entities. Such aggregates are generally classified as either amorphous or highly ordered, the most common form of the latter being amyloid fibrils. Amyloid fibrils composed of cross-β-sheet structure are the pathological hallmarks of several diseases including Alzheimer’s disease, but are also associated with functional states such as the fungal HET-s prion. This review aims to summarize the recent high-resolution structural studies of amyloid fibrils in light of their (potential) activities. We propose that the repetitive nature of the cross-β-sheet structure of amyloids is key for their multiple properties: the repeating motifs can translate a rather non-specific interaction into a specific one through cooperativity.     

Binding symmetry and surface flexibility mediate antibody self-association

ABSTRACT

Solution stability is an important factor in the optimization of engineered biotherapeutic candidates such as monoclonal antibodies because of its possible effects on manufacturability, pharmacology, efficacy and safety. A detailed atomic understanding of the mechanisms governing self-association of natively folded protein monomers is required to devise predictive tools to guide screening and re-engineering along the drug development pipeline. We investigated pairs of affinity-matured full-size antibodies and observed drastically different propensities to aggregate from variants differing by a single amino-acid. Biophysical testing showed that antigen-binding fragments (Fabs) from the aggregating antibodies also reversibly associated with equilibrium dissociation constants in the low-micromolar range. Crystal structures (PDB accession codes 6MXR, 6MXS, 6MY4, 6MY5) and bottom-up hydrogen-exchange mass spectrometry revealed that Fab self-association occurs in a symmetric mode that involves the antigen complementarity-determining regions. Subtle local conformational changes incurred upon point mutation of monomeric variants foster formation of complementary polar interactions and hydrophobic contacts to generate a dimeric Fab interface. Testing of popular in silico tools generally indicated low reliabilities for predicting the aggregation propensities observed. A structure-aggregation data set is provided here in order to stimulate further improvements of in silico tools for prediction of native aggregation. Incorporation of intermolecular docking, conformational flexibility, and short-range packing interactions may all be necessary features of the ideal algorithm.     

Cryo-EM of amyloid fibrils and cellular aggregates

1. Download : Download high-res image (183KB)
2. Download : Download full-size image

     

Cytotoxicity of amyloid fibrils of X-protein

It is known that amyloid oligomers, protofibrils, and fibrils induce cell death, and antibiotic tetracycline inhibits the fibrillization of beta amyloid peptides and other amyloidogenic proteins and disassembles their pre-formed fibrils. Earlier we have demonstrated that sarcomeric cytoskeletal proteins of the titin family (X-, C-, and H-proteins) are capable to form in vitro amyloid fibrils, and tetracycline effectively destroys these fibrils. Here we show that the viability of polymorphonuclear leukocytes in the presence of X-protein amyloids depends on the concentration of amyloid fibrils of X-protein and the time of incubation. In addition to the disaggregation of X-protein fibrils, tetracycline eliminated the cytotoxic effect of the protein. The antibiotic itself did not show a toxic effect, and the cell viability in its presence even increased. Our results evidence the potential of this approach for evaluating the effectiveness of drugs preventing or treating amyloidoses.     

The protofilament substructure of amyloid fibrils

Tissue deposition of normally soluble proteins, or their fragments, as insoluble amyloid fibrils causes the usually fatal, acquired and hereditary systemic amyloidoses and is associated with the pathology of Alzheimer's disease, type 2 diabetes and the transmissible spongiform encephalopathies. Although each type of amyloidosis is characterised by a specific amyloid fibril protein, the deposits share pathognomonic histochemical properties and the structural morphology of all amyloid fibrils is very similar. We have previously demonstrated that transthyretin amyloid fibrils contain four constituent protofilaments packed in a square array. Here, we have used cross-correlation techniques to average electron microscopy images of multiple cross-sections in order to reconstruct the sub-structure of ex vivo amyloid fibrils composed of amyloid A protein, monoclonal immunoglobulin lambda light chain, Leu60Arg variant apolipoprotein AI, and Asp67His variant lysozyme, as well as synthetic fibrils derived from a ten-residue peptide corresponding to the A-strand of transthyretin. All the fibrils had an electron-lucent core but the packing arrangement comprised five or six protofilaments rather than four. The structural similarity that defines amyloid fibres thus exists principally at the level of beta-sheet folding of the polypeptides within the protofilament, while the different types vary in the supramolecular assembly of their protofilaments.     

Membrane effects of lysozyme amyloid fibrils

The influence of mature lysozyme fibrils on the structural and physical properties of model membranes composed of phosphatidylcholine (PC) and its mixtures with cardiolipin (CL) (10 mol%) and cholesterol (Chol) (30 mol%) was studied using fluorescent probes DPH, pyrene, Laurdan and MBA. Analysis of pyrene fluorescence spectra along with the measurements of DPH fluorescence anisotropy revealed that the structure of hydrocarbon chains region of lipid bilayer is not affected by the fibrillar aggregates of lysozyme. In contrast, probing the membrane effects by Laurdan and MBA showed the rise of both the generalized polarization of Laurdan and the MBA fluorescence anisotropy, suggesting that amyloid protein induces reduction of bilayer hydration and increase of lipid packing in the interfacial region of model membranes.     

Chiral superstructures of insulin amyloid fibrils

Hydrodynamic forces are capable of inducing structural order in dispersed solid phases, and of causing symmetry-breaking when chiral crystals precipitate from an achiral liquid phase. Until it was observed upon vortex-assisted fibrillation of insulin, such behavior had been thought to be confined to few unbiological systems. In this paper we are discussing chiroptical properties of two chiral variants of insulin amyloid, termed +ICD and -ICD, which form during the process of chiral bifurcation in vortexed solutions of aggregating insulin. As conventional measurements of circular dichroism of solid, anisotropic substances are particularly vulnerable to overlapping influences of linear birefringence and linear dichroism, we have employed complementary tools including dedicated universal chiroptical spectrophotometer to rule out such artifacts. We propose that the strong chiroptical properties of +ICD and -ICD insulin fibrils are an aspect of genuine superstructural chirality of amyloid fibrils and of powerful excitonic couplings taking place within them. A comparison of thioflavin T complexes with fibrils formed by insulin and polyglutamic acid suggests that the extrinsic Cotton effect stemming from the level of single twisted dye molecules is weaker, although diagnostically useful, and cannot account for the overall magnitude of ICD of the dye bound to ±ICD insulin amyloid.     

Alzheimer's amyloid fibrils: structure and assembly

Structural studies of Alzheimer's amyloid fibrils have revealed information about the structure at different levels. The amyloid-beta peptide has been examined in various solvents and conditions and this has led to a model by which a conformational switching occurs from alpha-helix or random coil, to a beta-sheet structure. Amyloid fibril assembly proceeds by a nucleation dependent pathway leading to elongation of the fibrils. Along this pathway small oligomeric intermediates and short fibrillar structures (protofibrils) have been observed. In cross-section the fibril appears to be composed of several subfibrils or protofilaments. Each of these protofilaments is composed of beta-sheet structure in which hydrogen bonding occurs along the length of the fibre and the beta-strands run perpendicular to the fibre axis. This hierarchy of structure is discussed in this review.     

Template-directed self-assembly and growth of insulin amyloid fibrils

The formation of amyloid aggregates in tissue is a pathological feature of many neurodegenerative diseases and type II diabetes. Amyloid deposition, the process of amyloid growth by the association of individual soluble amyloid molecules with a pre-existing amyloid template (i.e., plaque), is known to be critical for amyloid formation in vivo. The requirement for a natural amyloid template, however, has made amyloid deposition study difficult and cumbersome. In the present work, we developed a novel, synthetic amyloid template by attaching amyloid seeds covalently onto an N-hydroxysuccinimide-activated surface, where insulin was chosen as a model amyloidogenic protein. According to ex situ atomic force microscopy observations, insulin monomers in solution were deposited onto the synthetic amyloid template to form fibrils, like hair growth. The fibril formation on the template occurred without lag time, and its rate was highly accelerated than in the solution. The fibrils were long, over 2 mum, and much thinner than those in the solution, which was caused by limited nucleation sites on the template surface and lack of lateral twisting between fibrils. According to our investigations using thioflavin T-induced fluorescence, birefringent Congo red binding, and circular dichroism, fibrils grown on the template were identified to be amyloids that formed through a conformational rearrangement of insulin monomers upon interaction with the template. The amyloid deposition rate followed saturation kinetics with respect to insulin concentration in the solution. The characteristics of amyloid deposition on the synthetic template were in agreement with previous studies performed with human amyloid plaques. It is demonstrated that the synthetic amyloid template can be used for the screening of inhibitors on amyloid deposition in vitro.     

Structural characterisation of islet amyloid polypeptide fibrils

Islet amyloid is found in many patients suffering from type 2 diabetes. Amyloid fibrils found deposited in the pancreatic islets are composed of a 37-residue peptide, known as islet amyloid polypeptide (IAPP) (also known as amylin) and are similar to those found in other amyloid diseases. Synthetic IAPP peptide readily forms amyloid fibrils in vitro and this has allowed fibril formation kinetics and the overall morphology of IAPP amyloid to be studied. Here, we use X-ray fibre diffraction, electron microscopy and cryo-electron microscopy to examine the molecular structure of IAPP amyloid fibrils. X-ray diffraction from aligned synthetic amyloid fibrils gave a highly oriented diffraction pattern with layer-lines spaced 4.7 A apart. Electron diffraction also revealed the characteristic 4.7 A meridional signal and the position of the reflection could be compared directly to the image of the diffracting unit. Cryo-electron microscopy revealed the strong signal at 4.7 A that has been previously visualised from a single Abeta fibre. Together, these data build up a picture of how the IAPP fibril is held together by hydrogen bonded beta-sheet structure and contribute to the understanding of the generic structure of amyloid fibrils.     

All-atom computer simulations of amyloid fibrils disaggregation

Amyloidlike fibrils are found in many fatal diseases, including Alzheimer's disease, type II diabetes mellitus, transmissible spongiform encephalopathies, and prion diseases. These diseases are linked to proteins that have partially unfolded, misfolded, and aggregated into amyloidlike fibrils. The kinetics of amyloidlike fibrils aggregation is still hotly debated and remains an important open question. We have utilized the GNNQQNY crystal structure and high-temperature molecular dynamics simulation in explicit solvent to study the disaggregation mechanism of the GNNQQNY fibrils and to infer its likely aggregation pathways. A hexamer model and a 12-mer model both with two parallel β-sheets separated by a dry side-chain interface were adopted in our computational analysis. A cumulative time of 1 μs was simulated for the hexamer model at five different temperatures (298 K, 348 K, 398 K, 448 K, and 498 K), and a cumulative time of 2.1 μs was simulated for the 12-mer model at four temperatures (298 K, 398 K, 448 K, and 498 K). Our disaggregation landscape and kinetics analyses indicate that tetramers probably act as the transition state in both the hexamer and the 12-mer simulations. In addition, the 12-mer simulations show that the initial aggregation nucleus is with eight peptides. Furthermore, the landscape is rather flat from 8-mers to 12-mers, indicating the absence of major barriers once the initial aggregation nucleus forms. Thus, the likely aggregation pathway is from monomers to the initial nucleus of 8-mers with tetramers as the transition state. Transition state structure analysis shows that the two dominant transition state conformations are tetramers in the 3-1 and 2-2 arrangements. The predominant nucleus conformations are in peptide arrangements maximizing dry side-chain contacts. Landscape and kinetics analyses also indicate that the parallel β-sheets form earlier than the dry side-chain contacts during aggregation. These results provide further insights in understanding the early fibrils aggregation.     

Recovery of functional enzyme from amyloid fibrils

Amyloid deposits, which accumulate in numerous diseases, are the final stage of multi-step protein conformational-conversion and oligomerization processes. The underlying molecular mechanisms are not fully understood, and particularly little is known about the reverse reaction. Here we show that phosphoglycerate kinase amyloid fibrils can be converted back into native protein. We achieved recovery with 60% efficiency, which is comparable to the success rate of the unfolding-refolding studies, and the recovered enzyme was folded, stable and fully active. The key intermediate stages in the recovery process are fibril disassembly and unfolding followed by spontaneous protein folding.     

The association of lipids with amyloid fibrils

Amyloid formation continues to be a widely studied area because of its association with numerous diseases, such as Alzheimer’s and Parkinson’s diseases. Despite a large body of work on protein aggregation and fibril formation, there are still significant gaps in our understanding of the factors that differentiate toxic amyloid formation in vivo from alternative misfolding pathways. In addition to proteins, amyloid fibrils are often associated in their cellular context with several types of molecule, including carbohydrates, polyanions, and lipids. This review focuses in particular on evidence for the presence of lipids in amyloid fibrils and the routes by which those lipids may become incorporated. Chemical analyses of fibril composition, combined with studies to probe the lipid distribution around fibrils, provide evidence that in some cases, lipids have a strong association with fibrils. In addition, amyloid fibrils formed in the presence of lipids have distinct morphologies and material properties. It is argued that lipids are an integral part of many amyloid deposits in vivo, where their presence has the potential to influence the nucleation, morphology, and mechanical properties of fibrils. The role of lipids in these structures is therefore worthy of further study.