Functional involvement of G8 in the hairpin ribozyme cleavage mechanism.

The catalytic determinants for the cleavage and ligation reactions mediated by the hairpin ribozyme are integral to the polyribonucleotide chain. We describe experiments that place G8, a critical guanosine, at the active site, and point to an essential role in catalysis. Cross-linking and modeling show that formation of a catalytic complex is accompanied by a conformational change in which N1 and O6 of G8 become closely apposed to the scissile phosphodiester. UV cross-linking, hydroxyl-radical footprinting and native gel electrophoresis indicate that G8 variants inhibit the reaction at a step following domain association, and that the tertiary structure of the inactive complex is not measurably altered. Rate-pH profiles and fluorescence spectroscopy show that protonation at the N1 position of G8 is required for catalysis, and that modification of O6 can inhibit the reaction. Kinetic solvent isotope analysis suggests that two protons are transferred during the rate-limiting step, consistent with rate-limiting cleavage chemistry involving concerted deprotonation of the attacking 2'-OH and protonation of the 5'-O leaving group. We propose mechanistic models that are consistent with these data, including some that invoke a novel keto-enol tautomerization.     

Specificity of the hairpin ribozyme. Sequence requirements surrounding the cleavage site.

Substrate sequence requirements of the hairpin ribozyme have been partially defined by both mutational and in vitro selection experiments. It was considered that the best targets were those that included the N downward arrowGUC sequence surrounding the cleavage site. In contrast to previous studies that failed to evaluate all possible combinations of these nucleotides, we have performed an exhaustive analysis of the cleavage of 64 substrate variants. They represent all possible sequence combinations of the J2/1 nucleotides except the well established G(+1). No cleavage was observed with 24 sequences. C(+2) variants showed little or no cleavage, whereas U(+2) substrates were all cleavable. The maximal cleavage rate was obtained with the AGUC substrate. Cleavage rates of sequences HGUC (H = A, C, or U), GGUN, GGGR (R = A or G), AGUU, and UGUA were up to 5 times lower than the AGUC one. This shows that other sequences besides NGUC could also be considered as good targets. A second group of sequences WGGG (W = A or U), UGUK (K = G or U), MGAG (M = A or C), AGUA, and UGGA were cleaved between 6 and 10 times less efficiently. Furthermore, the UGCU sequence of a noncleavable viral target was mutated to AGUC resulting in a proficiently cleavable substrate by its cognate hairpin ribozyme. This indicates that our conclusions may be extrapolated to other hairpin ribozymes with different specificity.     

Mutagenesis of the hairpin ribozyme.

Extensive in vitro mutagenesis studies have been performed on the hairpin ribozyme and substrate in an effort to refine the overall secondary structure of the molecule and provide further insight into what elements are essential for activity. A secondary structure consisting of four helices and five loop regions remains the basic model as originally proposed. Two helices, helix 1 and 2, form between the substrate and ribozyme while helices 3 and 4 are within the ribozyme itself. Our results suggest that helices 3 and 4 are smaller than previously proposed, consisting of four base pairs and three base pairs respectively. Helix 4 can be extended without loss of activity and loop 3 at the closed end of the hairpin model can be varied in sequence with retention of activity. There is an unpaired nucleotide between helices 2 and 3 consisting of a single A base, suggesting the opportunity for flexibility within the tertiary structure at this point. Comparisons are made between the new data and previously published mutagenesis and phylogenetic data. Substrate targeting rules require base pairing between helices 1 and 2 with cleavage (*) occurring in a preferred 5'(g/c/u)n*guc3' sequence of the substrate.     

The hairpin ribozyme

The hairpin ribozyme is a naturally occurring RNA that catalyzes sequence-specific cleavage and ligation of RNA. It has been the subject of extensive biochemical and structural studies, perhaps the most detailed for any catalytic RNA to date. Comparison of the structures of its constituent domains free and fully assembled demonstrates that the RNA undergoes extensive structural rearrangement. This rearrangement results in a distortion of the substrate RNA that primes it for cleavage. This ribozyme is known to achieve catalysis employing exclusively RNA functional groups. Metal ions or other catalytic cofactors are not used. Current experimental evidence points to a combination of at least four mechanistic strategies by this RNA: (1) precise substrate orientation, (2) preferential transition state binding, (3) electrostatic catalysis, and (4) general acid base catalysis.     

The hairpin ribozyme

The hairpin ribozyme is a member of a family of small RNA endonucleases, which includes hammer-head, human hepatitis delta virus, Neurospora VS, and the lead-dependent catalytic RNAs. All these catalytic RNAs reversibly cleave the phosphodiester bond of substrate RNA to generate 5'-hydroxyl and 2',3'-cyclic phosphate termini. Whereas the reaction products from family members are similar, large structural and mechanistic differences exist. Structurally the hairpin ribozyme has two principal domains that interact to facilitate catalysis. The hairpin ribozyme uses a catalytic mechanism that does not require metals for cleavage or ligation of substrate RNA. In this regard it is presently unique among RNA catalysts. Targeting rules for cleavage of substrate have been determined and required bases for catalysis have been identified. The hairpin ribozyme has been developed and used for gene therapy and was the first ribozyme to be approved for human clinical trials.     

Binding and cleavage of nucleic acids by the "hairpin" ribozyme

The "hairpin" ribozyme derived from the minus strand of tobacco ringspot virus satellite RNA [(-)sTRSV] efficiently catalyzes sequence-specific RNA hydrolysis in trans (Feldstein et al., 1989; Hampel & Triz, 1989; Haseloff & Gerlach, 1989). The ribozyme does not cleave DNA. An RNA substrate analogue containing a single deoxyribonucleotide residue 5' to the cleavage site (A-1) binds to the ribozyme efficiently but cannot be cleaved. A DNA substrate analogue with a ribonucleotide at A-1 is cleaved; thus A-1 provides the only 2'-OH required for cleavage. These results support cleavage via a transphosphorylation mechanism initiated by attack of the 2'-OH of A-1 on the scissile phosphodiester. The ribozyme discriminates between DNA and RNA in both binding and cleavage. Results indicate that the 2'-OH of A-1 functions in complex stabilization as well as cleavage. The ribozyme efficiently cleaves a phosphorothioate diester linkage, suggesting that the pro-Rp oxygen at the scissile phosphodiester does not coordinate Mg2+.     

Investigation of the proposed interdomain ribose zipper in hairpin ribozyme cleavage using 2'-modified nucleosides

The hairpin ribozyme achieves catalytic cleavage through interaction of essential nucleotides located in two distinct helical domains that include internal loops. Initial docking of the two domains is ion dependent and appears to be followed by a structural rearrangement that allows the ribozyme to achieve a catalytically active state that can undergo cleavage. The proposed structural rearrangement may also be ion dependent and is now of increased importance due to recent evidence that docking is not rate limiting and that metal ions are unlikely to be involved in the chemical cleavage step. An initial structural model of the docked hairpin ribozyme included a proposal for a ribose zipper motif that involves two pairs of hydroxyl groups at A(10) and G(11) in domain A pairing with C(25) and A(24) in domain B, respectively. We have used a chemical functional group substitution technique to study whether this proposed ribose zipper is likely to be present in the active, conformationally rearranged ribozyme that is fit for cleavage. We have chemically synthesized a series of individually modified hairpin ribozymes containing 2'-analogues of nucleosides, that include 2'-deoxy and 2'-deoxy-2'-fluoro at each of the four nucleoside positions, 2'-amino-2'-deoxy, 2'-deoxy-2'-thio, and 2'-arabino at position C(25), and 2'-oxyamino at position A(10), as well as some double substitutions, and we studied their cleavage rates under both single- and multiple-turnover conditions. We conclude that at least some of the hydrogen-bonding interactions in the ribose zipper motif, either as originally proposed or in a recently suggested structural variation, are unlikely to be present in the active rearranged form of the ribozyme that undergoes cleavage. Instead, we provide strong evidence for a very precise conformational positioning for the residue C(25) in the active hairpin. A precise conformational requirement would be expected for C(25) if it rearranges to form a base-triple with A(9) and the essential residue neighboring the cleavage site G(+1), as recently proposed by another laboratory. Our results provide further support for conformational rearrangement as an important step in hairpin ribozyme cleavage.     

Specificity of hammerhead ribozyme cleavage.

To be effective in gene inactivation, the hammerhead ribozyme must cleave a complementary RNA target without deleterious effects from cleaving non-target RNAs that contain mismatches and shorter stretches of complementarity. The specificity of hammerhead cleavage was evaluated using HH16, a well-characterized ribozyme designed to cleave a target of 17 residues. Under standard reaction conditions, HH16 is unable to discriminate between its full-length substrate and 3'-truncated substrates, even when six fewer base pairs are formed between HH16 and the substrate. This striking lack of specificity arises because all the substrates bind to the ribozyme with sufficient affinity so that cleavage occurs before their affinity differences are manifested. In contrast, HH16 does exhibit high specificity towards certain 3'-truncated versions of altered substrates that either also contain a single base mismatch or are shortened at the 5' end. In addition, the specificity of HH16 is improved in the presence of p7 nucleocapsid protein from human immunodeficiency virus (HIV)-1, which accelerates the association and dissociation of RNA helices. These results support the view that the hammerhead has an intrinsic ability to discriminate against incorrect bases, but emphasizes that the high specificity is only observed in a certain range of helix lengths.     

Nucleobase catalysis in the hairpin ribozyme

RNA catalysis is important in the processing and translation of RNA molecules, yet the mechanisms of catalysis are still unclear in most cases. We have studied the role of nucleobase catalysis in the hairpin ribozyme, where the scissile phosphate is juxtaposed between guanine and adenine bases. We show that a modified ribozyme in which guanine 8 has been substituted by an imidazole base is active in both cleavage and ligation, with ligation rates 10-fold faster than cleavage. The rates of both reactions exhibit bell-shaped dependence on pH, with pK(a) values of 5.7 +/- 0.1 and 7.7 +/- 0.1 for cleavage and 6.1 +/- 0.3 and 6.9 +/- 0.3 for ligation. The data provide good evidence for general acid-base catalysis by the nucleobases.     

Tertiary structure stabilization promotes hairpin ribozyme ligation.

The hairpin ribozyme catalyzes a reversible RNA cleavage reaction that participates in processing intermediates of viral satellite RNA replication in plants. A minimal hairpin ribozyme consists of two helix-loop-helix segments. These segments associate noncoaxially in the active folded structure in a way that brings catalytically important loop nucleotides into close proximity. The hairpin ribozyme in the satellite RNA of Tobacco Ringspot Virus assembles in the context of a four-way helical junction. Recent physical characterization of hairpin ribozyme structures using fluorescence resonance energy transfer demonstrated enhanced stability of the folded structure in the context of a four-way helical junction compared to minimal hairpin ribozyme variants. Analysis of the functional consequences of this modification of the helical junction has revealed two changes in the hairpin ribozyme kinetic mechanism. First, ribozymes with a four-way helical junction bind 3' cleavage products with much higher affinity than minimal hairpin ribozymes, evidence that tertiary interactions within the folded structure contribute to product binding energy. Second, the balance between ligation and cleavage shifts in favor of ligation. The enhanced ligation activity of hairpin ribozymes that contain a four-way helical junction supports the notion that tertiary structure stability is a major determinant of the hairpin ribozyme proficiency as a ligase and illustrates the link between RNA structure and biological function.     

Folding and catalysis by the hairpin ribozyme.

The hairpin ribozyme undergoes a site-specific transesterification cleavage of the phosphodiester backbone. The natural form of the ribozyme is a four-way helical junction, where two arms contain unpaired loops. This folds by pairwise coaxial stacking of helical arms, and a rotation into an antiparallel conformation in which there is close association between the loops. This probably generates the local conformation required to facilitate the trajectory into an in-line SN2 transition state. Folding is induced by the cooperative binding of at least two divalent metal ions, which are probably distributed between the junction and the loop-loop interface. The junction forms the structural scaffold on which the geometry of the ribozyme is built, and structural perturbation of the junction leads to impaired catalytic activity.     

The influence of junction conformation on RNA cleavage by the hairpin ribozyme in its natural junction form

In the natural form of the hairpin ribozyme the two loop-carrying duplexes that comprise the majority of essential bases for activity form two adjacent helical arms of a four-way RNA junction. In the present work we have manipulated the sequence around the junction in a way known to perturb the global folding properties. We find that replacement of the junction by a different sequence that has the same conformational properties as the natural sequence gives closely similar reaction rate and Arrhenius activation energy for the substrate cleavage reaction. By comparison, rotation of the natural sequence in order to alter the three-dimensional folding of the ribozyme leads to a tenfold reduction in the kinetics of cleavage. Replacement with the U1 four-way junction that is resistant to rotation into the antiparallel structure required to allow interaction between the loops also gives a tenfold reduction in cleavage rate. The results indicate that the conformation of the junction has a major influence on the catalytic activity of the ribozyme. The results are all consistent with a role for the junction in the provision of a framework by which the loops are presented for interaction in order to create the active form of the ribozyme.     

Novel spermine-amino acid conjugates and basic tripeptides enhance cleavage of the hairpin ribozyme at low magnesium ion concentration.

Combinations of the polyamine spermine and magnesium ions synergize to dramatically enhance cleavage of the hairpin ribozyme. Certain synthetic basic tripeptides stimulate hairpin cleavage significantly at limiting magnesium ion concentration, notably the tripeptide of L-diaminobutyric acid (Dab). Of a range of novel synthetic spermine-amino acid conjugates, L-Dab-spermine (but not D-Dab nor other amino acid conjugates) was more effective than spermine itself.     

Structure and function of the hairpin ribozyme

The hairpin ribozyme belongs to the family of small catalytic RNAs that cleave RNA substrates in a reversible reaction that generates 2',3'-cyclic phosphate and 5'-hydroxyl termini. The hairpin catalytic motif was discovered in the negative strand of the tobacco ringspot virus satellite RNA, where hairpin ribozyme-mediated self-cleavage and ligation reactions participate in processing RNA replication intermediates. The self-cleaving hairpin, hammerhead, hepatitis delta and Neurospora VS RNAs each adopt unique structures and exploit distinct kinetic and catalytic mechanisms despite catalyzing the same chemical reactions. Mechanistic studies of hairpin ribozyme reactions provided early evidence that, like protein enzymes, RNA enzymes are able to exploit a variety of catalytic strategies. In contrast to the hammerhead and Tetrahymena ribozyme reactions, hairpin-mediated cleavage and ligation proceed through a catalytic mechanism that does not require direct coordination of metal cations to phosphate or water oxygens. The hairpin ribozyme is a better ligase than it is a nuclease while the hammerhead reaction favors cleavage over ligation of bound products by nearly 200-fold. Recent structure-function studies have begun to yield insights into the molecular bases of these unique features of the hairpin ribozyme.     

A triplex ribozyme expression system based on a single hairpin ribozyme

Triplex ribozyme (RZ) configurations allow for the individual activity of trans-acting RZs in multiple expression cassettes (multiplex), thereby increasing target cleavage relative to conventionally expressed RZs. Although hairpin RZs have been advantageously compared to hammerhead RZs, their longer size and structural features complicated triplex design. We present a triplex expression system based on a single hairpin RZ with transcleavage capability and simple engineering. The system was tested in vitro using cis- and trans-cleavage kinetic assays against a known target RNA from HPV-16 E6/E7 mRNA. Single and multiplex triplex RZ constructs were more efficient in cleaving the target than tandem-cloned hairpin RZs, suggesting that the release of individual RZs enhanced trans-cleavage kinetics. Multiplex systems constructed with two different hairpin RZs resulted in better trans-cleavage compared to standard double-RZ constructs. In addition, the triplex RZ performed cis- and trans-cleavage in cervical cancer cells. The use of triplex configurations with multiplex RZs permit differential targeting of the same or different RNA, thus improving potential use against unstable targets. This prototype will provide the basis for the development of future RZ-based therapies and technologies.     

Structure of the ribozyme substrate hairpin of Neurospora VS RNA: a close look at the cleavage site

The cleavage site of the Neurospora VS RNA ribozyme is located in a separate hairpin domain containing a hexanucleotide internal loop with an A-C mismatch and two adjacent G-A mismatches. The solution structure of the internal loop and helix la of the ribozyme substrate hairpin has been determined by nuclear magnetic resonance (NMR) spectroscopy. The 2 nt in the internal loop, flanking the cleavage site, a guanine and adenine, are involved in two sheared G.A base pairs similar to the magnesium ion-binding site of the hammerhead ribozyme. Adjacent to the tandem G.A base pairs, the adenine and cytidine, which are important for cleavage, form a noncanonical wobble A+-C base pair. The dynamic properties of the internal loop and details of the high-resolution structure support the view that the hairpin structure represents a ground state, which has to undergo a conformational change prior to cleavage. Results of chemical modification and mutagenesis data of the Neurospora VS RNA ribozyme can be explained in context with the present three-dimensional structure.     

RNA self-splicing by engineered hairpin ribozyme variants

Small RNAs capable of self-cleavage and ligation might have been the precursors for the much more complex self-splicing group I and II introns in an early RNA world. Here, we demonstrate the activity of engineered hairpin ribozyme variants, which as self-splicing introns are removed from their parent RNA. In the process, two cleavage reactions are supported at the two intron-exon junctions, followed by ligation of the two generated exon fragments. As a result, the hairpin ribozyme, here acting as the self-splicing intron, is cut out. Two self-splicing hairpin ribozyme variants were investigated, one designed by hand, the other by a computer-aided approach. Both variants perform self-splicing, generating a cut-out intron and ligated exons.     

The kinetic mechanism of the hairpin ribozyme in vivo: influence of RNA helix stability on intracellular cleavage kinetics

The relationship between hairpin ribozyme structure, and cleavage and ligation kinetics, and equilibria has been characterized extensively under a variety of reaction conditions in vitro. We developed a quantitative assay of hairpin ribozyme cleavage activity in yeast to learn how structure-function relationships defined for RNA enzymes in vitro relate to RNA-mediated reactions in cells. Here, we report the effects of variation in the stability of an essential secondary structure element, H1, on intracellular cleavage kinetics. H1 is the base-paired helix formed between ribozyme and 3' cleavage product RNAs. H1 sequences with fewer than three base-pairs fail to support full activity in vitro or in vivo, arguing against any significant difference in the stability of short RNA helices under in vitro and intracellular conditions. Under standard conditions in vitro that include 10 mM MgCl(2), the internal equilibrium between cleavage and ligation of ribozyme-bound products favors ligation. Consequently, ribozymes with stable H1 sequences display sharply reduced self-cleavage rates, because cleavage is reversed by rapid re-ligation of bound products. In contrast, ribozymes with as many as 26 base-pairs in H1 continue to self-cleave at maximum rates in vivo. The failure of large products to inhibit cleavage could be explained if intracellular conditions promote rapid product dissociation or shift the internal equilibrium to favor cleavage. Model experiments in vitro suggest that the internal equilibrium between cleavage and ligation of bound products is likely to favor cleavage under intracellular ionic conditions.     

Adenine protonation in domain B of the hairpin ribozyme

Protein enzymes often use ionizable side chains, such as histidine, for general acid-base catalysis because the imidazole pK(a) is near neutral pH. RNA enzymes, on the other hand, are comprised of nucleotides which do not have apparent pK(a) values near neutral pH. Nevertheless, it has been recently shown that cytidine and adenine protonation can play an important role in both nucleic acid structure and catalysis. We have employed heteronuclear NMR methods to determine the pK(a) values and time scales of chemical exchanges associated with adenine protonation within the catalytically essential B domain of the hairpin ribozyme. The large, adenine-rich internal loop of the B domain allows us to determine adenine pK(a) values for a variety of non-Watson-Crick base pairs. We find that adenines within the internal loop have pK(a) values ranging from 4.8 to 5.8, significantly higher than the free mononucleotide pK(a) of 3. 5. Adenine protonation results in potential charge stabilization, hydrogen bond formation, and stacking interactions that are expected to stabilize the internal loop structure at low pH. Fast proton exchange times of 10-50 micros were determined for the well-resolved adenines. These results suggest that shifted pK(a) values may be a common feature of adenines in non-Watson-Crick base pairs, and identify two adenines which may participate in hairpin ribozyme active site chemistry.