Propensity for C-terminal domain swapping correlates with increased regional flexibility in the C-terminus of RNase A

Domain swapping is a type of oligomerization in which monomeric proteins exchange a structural element, resulting in oligomers whose subunits recapitulate the native, monomeric fold. It has been implicated as a potential mechanism for protein aggregation, which provides a strong impetus to understand the structural determinants and folding mechanisms that trigger domain swapping. Bovine pancreatic ribonuclease A (RNase A) is a well-studied protein known to domain swap under extreme conditions, such as lyophilization from acetic acid. The major domain-swapped dimer form of RNase A exchanges a β-strand at its C-terminus to form a C-terminal domain-swapped dimer. To study the mechanism by which C-terminal swapping occurs, we used a variant of RNase A containing a P114G mutation that readily domain swaps under physiological conditions. Using NMR and hydrogen-deuterium exchange, we find that the P114G variant has decreased protection from hydrogen exchange compared to the wild-type protein near the C-terminal hinge region. Our results suggest that domain swapping occurs via a local high-energy fluctuation at the C-terminus.     

Topological determinants of protein domain swapping

Protein domain swapping has been repeatedly observed in a variety of proteins and is believed to result from destabilization due to mutations or changes in environment. Based on results from our studies and others, we propose that structures of the domain-swapped proteins are mainly determined by their native topologies. We performed molecular dynamics simulations of seven different proteins, known to undergo domain swapping experimentally, under mildly denaturing conditions and found in all cases that the domain-swapped structures can be recapitulated by using protein topology in a simple protein model. Our studies further indicated that, in many cases, domain swapping occurs at positions around which the protein tends to unfold prior to complete unfolding. This, in turn, enabled prediction of protein structural elements that are responsible for domain swapping. In particular, two distinct domain-swapped dimer conformations of the focal adhesion targeting domain of focal adhesion kinase were predicted computationally and were supported experimentally by data obtained from NMR analyses.     

The dual role of a loop with low loop contact distance in folding and domain swapping

Alpha helices, beta strands, and loops are the basic building blocks of protein structure. The folding kinetics of alpha helices and beta strands have been investigated extensively. However, little is known about the formation of loops. Experimental studies show that for some proteins, the formation of a single loop is the rate-determining step for folding, whereas for others, a loop (or turn) can misfold to serve as the hinge loop region for domain-swapped species. Computer simulations of an all-atom model of fragment B of Staphylococcal protein A found that the formation of a single loop initiates the dominant folding pathway. On the other hand, the stability analysis of intermediates suggests that the same loop is a likely candidate to serve as a hinge loop for domain swapping. To interpret the simulation result, we developed a simple structural parameter: the loop contact distance (LCD), or the sequence distance of contacting residues between a loop and the rest of the protein. The parameter is applied to a number of other proteins, including SH3 domains and prion protein. The results suggest that a locally interacting loop (low LCD) can either promote folding or serve as the hinge region for domain swapping. Thus, there is an intimate connection between folding and domain swapping, a possible cause of misfolding and aggregation.     

A protein contortionist: core mutations of GB1 that induce dimerization and domain swapping

Immunoglobulin-binding domain B1 of streptococcal protein G (GB1), a small (56 residues), stable, single-domain protein, is one of the most extensively used model systems in the area of protein folding and design. Recently, NMR and X-ray structures of a quintuple GB1 core mutant (L5V/A26F/F30V/Y33F/A34F) that showed an unexpected, intertwined tetrameric architecture were determined. Here, we report the NMR structure of another mutant, derived from the tetramer by reverting the single amino acid position F26 back to the wild-type sequence A26. The structure reveals a domain-swapped dimer that involves exchange of the second beta-hairpin. The resulting overall structure comprises an eight-stranded beta-sheet whose concave side is covered by two alpha helices. The dimer dissociates into a partially folded, monomeric species with a dissociation constant of 93(+/-10)microM.     

Molecular dynamics simulations to investigate the domain swapping mechanism of human cystatin C

Human cystatin C (HCC), one of the amyloidgenic proteins, has been proved to form a dimeric structure via a domain swapping process and then cause amyloid deposits in the brains of patients suffering from Alzheimer's disease. HCC monomer consists of a core with a five-stranded antiparallel beta-sheet (beta region) wrapped around a central helix. The connectivity of these secondary structures is: (N)-beta1-alpha-beta2-L1-beta3-AS-beta4-L2-beta5-(C). In this study, various molecular dynamics simulations were conducted to investigate the conformational changes of the monomeric HCC at different temperatures (300 and 500 K) and pH levels (2, 4, and 7) to gain insight into the domain swapping mechanism. The results show that high temperature (500 K) and low pH (pH 2) will trigger the domain swapping process of HCC. We further proposed that the domain swapping mechanism of HCC follows four steps: (1) the alpha-helix moves away from the beta region; (2) the contacts between beta2 and beta3-AS disappear; (3) the beta2-L1-beta3 hairpin unfolds following the so-called "zip-up" mechanism; and finally (4) the HCC dimer is formed. Our study shows that high temperature can accelerate the unfolding of HCC and the departure of the alpha-helix from the beta-region, especially at low pH value. This is attributed to the fact that that low pH results in the protonation of the side chains of Asp, Glu, and His residues, which further disrupts the following four salt-bridge interactions stabilizing the alpha-beta interface of the native structure: Asp15-Arg53 (beta1-beta2), Glu21/20-Lys54 (helix-beta2), Asp40-Arg70 (helix-AS), and His43-Asp81 (beta2-AS).     

Protein oligomerization through domain swapping: role of inter-molecular interactions and protein concentration

Domain swapping has been shown to be an important mechanism controlling multiprotein assembly and has been suggested recently as a possible mechanism underlying protein aggregation. Understanding oligomerization via domain swapping is therefore of theoretical and practical importance. By using a symmetrized structure-based (Gō) model, we demonstrate that in the free-energy landscape of domain swapping, a large free-energy barrier separates monomeric and domain-swapped dimeric configurations. We investigate the effect of finite monomer concentration, by implementing a new semi-analytical method, which involves computing the second virial coefficient, a thermodynamic indicator of inter-molecular interactions. This method, together with the symmetrized structure-based (Gō) model, minimizes the need for expensive many-protein simulations, providing a convenient framework to investigate concentration effect. Finally, we perform direct simulations of domain-swapped trimer formation, showing that this modeling approach can be used for higher-order oligomers.     

The GB1 amyloid fibril: recruitment of the peripheral beta-strands of the domain swapped dimer into the polymeric interface

Three-dimensional domain swapping has been evoked as a mechanism for oligomerization of proteins. Here, we show for the immunoglobulin-binding domain B1 of streptococcal protein G (GB1) that fibril formation is observed readily for variants that exist as domain-swapped dimers. No fibril was formed by a revertant that exhibits the stable wild-type GB1 fold or a mutant comprising a highly destabilized, fluctuating ensemble of conformers. Structural features of the GB1 amyloid fibril were characterized by cysteine disulfide cross-linking. Residues in the outer edge beta-strands of the domain-swapped dimer readily form intermolecular disulfide bonds prior to and during fibril formation. On the basis of these data, a structural model for the assembly of domain-swapped dimers into a polymeric structure of the GB1 fibril is proposed.     

Biophysical Analysis of the MHR Motif in Folding and Domain Swapping of the HIV Capsid Protein C-Terminal Domain

Infection by human immunodeficiency virus (HIV) depends on the function, in virion morphogenesis and other stages of the viral cycle, of a highly conserved structural element, the major homology region (MHR), within the carboxyterminal domain (CTD) of the capsid protein. In a modified CTD dimer, MHR is swapped between monomers. While no evidence for MHR swapping has been provided by structural models of retroviral capsids, it is unknown whether it may occur transiently along the virus assembly pathway. Whatever the case, the MHR-swapped dimer does provide a novel target for the development of anti-HIV drugs based on the concept of trapping a nonnative capsid protein conformation. We have carried out a thermodynamic and kinetic characterization of the domain-swapped CTD dimer in solution. The analysis includes a dissection of the role of conserved MHR residues and other amino acids at the dimerization interface in CTD folding, stability, and dimerization by domain swapping. The results revealed some energetic hotspots at the domain-swapped interface. In addition, many MHR residues that are not in the protein hydrophobic core were nevertheless found to be critical for folding and stability of the CTD monomer, which may dramatically slow down the swapping reaction. Conservation of MHR residues in retroviruses did not correlate with their contribution to domain swapping, but it did correlate with their importance for stable CTD folding. Because folding is required for capsid protein function, this remarkable MHR-mediated conformational stabilization of CTD may help to explain the functional roles of MHR not only during immature capsid assembly but in other processes associated with retrovirus infection. This energetic dissection of the dimerization interface in MHR-swapped CTD may also facilitate the design of anti-HIV compounds that inhibit capsid assembly by conformational trapping of swapped CTD dimers.     

Three-dimensional domain swapping in the protein structure space

Since the proposal of three-dimensional (3D) domain swapping, many 3D domain-swapped structures have been reported. However, when compared with the vast protein structure space, it is still unclear whether 3D domain swapping is a general mechanism for protein assembly. Here, we investigated this possibility by constructing a dataset consisting of more than 500 domain-swapped structures. The domain-swapped structures were mapped into the protein structure space. We found that about 10% of protein folds and 5% of protein families contain domain-swapped structures. When comparing the domain-swapped structures in a family/superfamily, we found that proteins within a family/superfamily can swap in different ways. Interface analysis revealed that the hinge loops contributed more than half of the open interface in 70% of bona fide domain-swapped dimers, indicating that the hinge loops play an important role in stabilizing the domain-swapped conformations. Our study supports the suggestion that domain swapping is a general property of all proteins and will facilitate further understanding the mechanism of 3D domain swapping.     

Folding and association of the human cell cycle regulatory proteins ckshs1 and ckshs2.

The two human proteins ckshs1 and ckshs2 are each 79 amino acids in length and consist of a four-stranded beta-sheet capped at one end by two alpha-helices. They are members of the cks family of essential cell cycle regulatory proteins that can adopt two native states, a monomer and a domain-swapped dimer formed by exchange of a C-terminal beta-strand. ckshs1 and ckshs2 both have marginal thermodynamic stability (the free energies of unfolding at 25 degrees C are 3.0 and 2.5 kcal/mol, respectively) and low kinetic stability (the rates of unfolding in water are approximately 1 s(-1)). Refolding of their denatured states to the monomeric forms of the proteins is slowed by transient oligomerization that is likely to occur via domain swapping. The folding behavior of ckshs1 and ckshs2 is markedly different from that of suc1, the cks protein from Schizosaccharomyces pombe, but the domain swapping propensities are similar. The greater thermodynamic and kinetic stability of suc1 and the population of a folding intermediate are most likely a consequence of its larger size (113 residues). The similarity in the domain swapping propensities, despite the contrast in other biophysical properties, may be attributable to the common double-proline motif in the hinge loop that connects the swapped domain to the rest of the protein. The motif was shown previously for suc1 to control the equilibrium between the monomer and the domain-swapped dimer. Finally, according to our model, the kinetic barrier separating the monomer and the domain-swapped dimer arises because the protein must unfold for beta-strand exchange to occur. Consistent with this, interconversion between the two states is much faster in the human proteins than it is for suc1, reflecting the faster unfolding rates of the former.     

Design and expression of a dimeric form of human immunodeficiency virus type 1 antibody 2G12 with increased neutralization potency

The antigen-binding fragment of the broadly neutralizing human immunodeficiency virus type 1 (HIV-1) antibody 2G12 has an unusual three-dimensional (3D) domain-swapped structure with two aligned combining sites that facilitates recognition of its carbohydrate epitope on gp120. When expressed as an intact immunoglobulin G (IgG), 2G12 formed typical IgG monomers containing two combining sites and a small fraction of a higher-molecular-weight species, which showed a significant increase in neutralization potency (50- to 80-fold compared to 2G12 monomer) across a range of clade A and B strains of HIV-1. Here we show that the higher-molecular-weight species corresponds to a 2G12 dimer containing four combining sites and present a model for how intermolecular 3D domain swapping could create a 2G12 dimer. Based on the structural model for a 3D domain-swapped 2G12 dimer, we designed and tested a series of 2G12 mutants predicted to increase the ratio of 2G12 dimer to monomer. We report a mutation that effectively increases the 2G12 dimer/monomer ratio without decreasing the expression yield. Increasing the proportion of 2G12 dimer compared to monomer could lead to a more potent reagent for gene therapy or passive immunization.     

The structure of an engineered domain-swapped ribonuclease dimer and its implications for the evolution of proteins toward oligomerization

BACKGROUND: Domain swapping has been proposed as a mechanism that explains the evolution from monomeric to oligomeric proteins. Bovine and human pancreatic ribonucleases are monomers with no biological properties other than their RNA cleavage ability. In contrast, the closely related bovine seminal ribonuclease is a natural domain-swapped dimer that has special biological properties, such as cytotoxicity to tumour cells. Several recombinant ribonuclease variants are domain-swapped dimers, but a structure of this kind has not yet been reported for the human enzyme. RESULTS: The crystal structure at 2 A resolution of an engineered ribonuclease variant called PM8 reveals a new kind of domain-swapped dimer, based on the change of N-terminal domains between the two subunits. The swapping is fastened at both hinge peptides by the newly introduced Gln101, involved in two intermolecular hydrogen bonds and in a stacking interaction between residues of different chains. Two antiparallel salt bridges and water-mediated hydrogen bonds complete a new interface between subunits, while the hinge loop becomes organized in a 3(10) helix structure. CONCLUSIONS: Proteins capable of domain swapping may quickly evolve toward an oligomeric form. As shown in the present structure, a single residue substitution reinforces the quaternary structure by forming an open interface. An evolutionary advantage derived from the new oligomeric state will fix the mutation and favour others, leading to a more extended complementary dimerization surface, until domain swapping is no longer necessary for dimer formation. The newly engineered swapped dimer reported here follows this hypothetical pathway for the rapid evolution of proteins.     

A captured folding intermediate involved in dimerization and domain-swapping of GB1

Immunoglobulin binding domain B1 of streptococcal protein G (GB1), a small (56 residues), stable, single domain protein, is one of the most extensively used model systems in the area of protein folding and design. The recently determined NMR structure of a quadruple mutant (HS#124F26A, L5V/F30V/Y33F/A34F) revealed a domain-swapped dimer that dissociated into a partially folded, monomeric species at low micromolar protein concentrations. Here, we have characterized this monomeric, partially folded species by NMR and show that extensive conformational heterogeneity for a substantial portion of the polypeptide chain exists. Exchange between the conformers within the monomer ensemble on the microsecond to millisecond timescale renders the majority of backbone amide resonances broadened beyond detection. Despite these extensive temporal and spatial fluctuations, the overall architecture of the monomeric mutant protein resembles that of wild-type GB1 and not the monomer unit of the domain-swapped dimer.     

Observation of signal transduction in three-dimensional domain swapping

p13suc1 (suc1) has two native states, a monomer and a domain-swapped dimer. The structure of each subunit in the dimer is identical to that of the monomer, except for the hinge loop that connects the exchanging domains. Here we find that single point mutations at sites throughout the protein and ligand binding both shift the position of the equilibrium between monomer and dimer. The hinge loop was shown previously to act as a loaded molecular spring that releases tension present in the monomer by adopting an alternative conformation in the dimer. The results here indicate that the release of strain propagates throughout the entire protein and alters the energetics of regions remote from the hinge. Our data illustrate how the signal conferred by the conformational change of a protein loop, elicited by domain swapping, ligand binding or mutation, can be sensed by a distant active site. This work highlights the potential role of strained loops in proteins: the energy they store can be used for both signal transduction and allostery, and they could steer the evolution of protein function. Finally, a structural mechanism for the role of suc1 as an adapter molecule is proposed.     

Three-dimensional domain swapping in the folded and molten-globule states of cystatins, an amyloid-forming structural superfamily

Cystatins, an amyloid-forming structural superfamily, form highly stable, domain-swapped dimers at physiological protein concentrations. In chicken cystatin, the active monomer is a kinetic trap en route to dimerization, and any changes in solution conditions or mutations that destabilize the folded state shorten the lifetime of the monomeric form. In such circumstances, amyloidogenesis will start from conditions where a domain-swapped dimer is the most prevalent species. Domain swapping occurs by a rearrangement of loop I, generating the new intermonomer interface between strands 2 and 3. The transition state for dimerization has a high level of hydrophobic group exposure, indicating that gross conformational perturbation is required for domain swapping to occur. Dimerization also occurs when chicken cystatin is in its reduced, molten-globule state, implying that the organization of secondary structure in this state mirrors that in the folded state and that domain swapping is not limited to the folded states of proteins. Although the interface between cystatin-fold units is poorly defined for cystatin A, the dimers are the appropriate size to account for the electron-dense regions in amyloid protofilaments.     

3D domain swapping: as domains continue to swap

Three-dimensional (3D) domain swapping creates a bond between two or more protein molecules as they exchange their identical domains. Since the term '3D domain swapping' was first used to describe the dimeric structure of diphtheria toxin, the database of domain-swapped proteins has greatly expanded. Analyses of the now about 40 structurally characterized cases of domain-swapped proteins reveal that most swapped domains are at either the N or C terminus and that the swapped domains are diverse in their primary and secondary structures. In addition to tabulating domain-swapped proteins, we describe in detail several examples of 3D domain swapping which show the swapping of more than one domain in a protein, the structural evidence for 3D domain swapping in amyloid proteins, and the flexibility of hinge loops. We also discuss the physiological relevance of 3D domain swapping and a possible mechanism for 3D domain swapping. The present state of knowledge leads us to suggest that 3D domain swapping can occur under appropriate conditions in any protein with an unconstrained terminus. As domains continue to swap, this review attempts not only a summary of the known domain-swapped proteins, but also a framework for understanding future findings of 3D domain swapping.     

A Hinge Region cis-Proline in Ribonuclease A Acts as a Conformational Gatekeeper for C-Terminal Domain Swapping

Domain swapping, the process in which a structural unit is exchanged between monomers to create a dimer containing two subunits of the monomeric fold, is believed to be an important mechanism for oligomerization and the formation of amyloid fibrils. Structural studies have implicated proline as an important residue for domain swapping due to its increased frequency in hinge regions preceding swapped arms. We hypothesized that proline's unique ability to populate both cis and trans peptide bond conformations may allow proline to act as a conformational gatekeeper, regulating interconversion between monomer and domain-swapped dimer forms. The hinge region of RNase A contains a proline at residue 114 that adopts a cis conformation in the monomer and extends to a trans conformation in the C-terminal domain-swapped dimer. Substitution of P114 with residues that strongly prefer a trans peptide bond (Ala, Gly) results in significant population of the C-terminal domain-swapped dimer under near-physiological conditions (pH 8.0, 37 °C). This is in stark contrast to dimerization of wild-type RNase A, which requires incubation under extreme conditions such as lyophilization from acetic acid or elevated temperature. In addition, we observe similar results when cis-P114 is mutated to glycine in a homologous RNase, human pancreatic RNase 1. Our results suggest that isomerization at P114 may facilitate population of a partially unfolded intermediate or alternative structure competent for domain swapping and provide support for a more general role for proline isomerization as a conformational gatekeeper in domain swapping and oligomerization.