Effect of Drug Solubility on Polymer Hydration and Drug Dissolution from Polyethylene Oxide (PEO) Matrix Tablets

The purpose of the study was to investigate the effect of drug solubility on polymer hydration and drug dissolution from modified release matrix tablets of polyethylene oxide (PEO). Different PEO matrix tablets were prepared using acetaminophen (ACE) and ibuprofen (IBU) as study compounds and Polyox WSR301 (PEO) as primary hydrophilic matrix polymer. Tablet dissolution was tested using the USP Apparatus II, and the hydration of PEO polymer during dissolution was recorded using a texture analyzer. Drug dissolution from the preparations was dependent upon drug solubility, hydrogel formation and polymer proportion in the preparation. Delayed drug release was attributed to the formation of hydrogel layer on the surface of the tablet and the penetration of water into matrix core through drug dissolution and diffusion. A multiple linear regression model could be used to describe the relationship among drug dissolution, polymer ratio, hydrogel formation and drug solubility; the mathematical correlation was also proven to be valid and adaptable to a series of study compounds. The developed methodology would be beneficial to formulation scientists in dosage form design and optimization.     

Optimization of Dexamethasone Mixed Nanomicellar Formulation

The purpose of this study was to develop a clear aqueous mixed nanomicellar formulation (MNF) of dexamethasone utilizing both d-α-tocopherol polyethylene glycol-1000 succinate (Vit E TPGS) and octoxynol-40 (Oc-40). In this study, Vit E TPGS and Oc-40 are independent variables. Formulations were prepared following solvent evaporation method. A three level full-factorial design was applied to optimize the formulation based on entrapment efficiency, size, and polydispersity index (PDI). A specific blend of Vit E TPGS and Oc-40 at a particular wt% ratio (4.5:2.0) produced excellent drug entrapment, loading, small mixed nanomicellar size and narrow PDI. Solubility of DEX in MNF is improved by ~6.3-fold relative to normal aqueous solubility. Critical micellar concentration (CMC) for blend of polymers (4.5:2.0) was found to be lower (0.012 wt%) than the individual polymers (Vit E TPGS (0.025 wt%) and Oc-40 (0.107 wt%)). No significant effect on mixed nanomicellar size and PDI with one-factor or multi-factor interactions was observed. Qualitative ¹H NMR studies confirmed absence of free drug in the outer aqueous MNF medium. MNF appeared to be highly stable. Cytotoxicity studies on rabbit primary corneal epithelial cells did not indicate any toxicity suggesting MNF of dexamethasone is safe and suitable for human topical ocular drops after further in vivo evaluations.KEY WORDS: aqueous mixed nanomicelles, characterization, critical micellar concentration (CMC), dexamethasone, experimental design     

Enhanced Solubility and Dissolution Rate of Lacidipine Nanosuspension: Formulation Via Antisolvent Sonoprecipitation Technique and Optimization Using Box–Behnken Design

Lacidipine (LCDP) is a highly lipophilic calcium channel blocker of poor aqueous solubility leading to poor oral absorption. This study aims to prepare and optimize LCDP nanosuspensions using antisolvent sonoprecipitation technique to enhance the solubility and dissolution of LCDP. A three-factor, three-level Box–Behnken design was employed to optimize the formulation variables to obtain LCDP nanosuspension of small and uniform particle size. Formulation variables were as follows: stabilizer to drug ratio (A), sodium deoxycholate percentage (B), and sonication time (C). LCDP nanosuspensions were assessed for particle size, zeta potential, and polydispersity index. The formula with the highest desirability (0.969) was chosen as the optimized formula. The values of the formulation variables (A, B, and C) in the optimized nanosuspension were 1.5, 100%, and 8 min, respectively. Optimal LCDP nanosuspension had particle size (PS) of 273.21 nm, zeta potential (ZP) of ?32.68 mV and polydispersity index (PDI) of 0.098. LCDP nanosuspension was characterized using x-ray powder diffraction, differential scanning calorimetry, and transmission electron microscopy. LCDP nanosuspension showed saturation solubility 70 times that of raw LCDP in addition to significantly enhanced dissolution rate due to particle size reduction and decreased crystallinity. These results suggest that the optimized LCDP nanosuspension could be promising to improve oral absorption of LCDP.     

Computational Oral Absorption Simulation for Low‐Solubility Compounds

Bile micelles play an important role in oral absorption of low‐solubility compounds. Bile micelles can affect solubility, dissolution rate, and permeability. For the pH–solubility profile in bile micelles, the Henderson–Hasselbalch equation should be modified to take bile‐micelle partition into account. For the dissolution rate, in the Nernst–Brunner equation, the effective diffusion coefficient in bile‐micelle media should be used instead of the monomer diffusion coefficient. The diffusion coefficient of bile micelles is 8‐ to 18‐fold smaller than that of monomer molecules. For permeability, the effective diffusion coefficient in the unstirred water layer adjacent to the epithelial membrane, and the free fraction at the epithelial membrane surface should be taken into account. The importance of these aspects is demonstrated here using several in vivo and clinical oral‐absorption data of low‐solubility model compounds. Using the theoretical equations, the food effect on oral absorption is further discussed.     

The use of autologous fibrin as a scaffold for cultivating autologous conjunctiva in the treatment of conjunctival defect

The purpose of this study was to compare the use of autologous fibrin to human amniotic membrane (HAM) as a scaffold in cultivating autologous conjunctiva for transplantation in treatment of conjunctival defect. An experimental study was performed using 18 adult New Zealand white strain rabbits which were divided into 3 groups. Each group consists of 6 rabbits. The conjunctiva on the temporal site was excised to create a conjunctival epithelial defect. The excised area in the Group 1 was transplanted with autologous conjunctiva cultivated on autologous fibrin; Group 2 was transplanted with autologous conjunctiva cultivated on HAM and Group 3 was left bare. The rabbits were followed up at regular intervals until 6 weeks. The mean period of complete conjunctival epithelization was 11.50 ± 8.22 days for the autologous fibrin group, 15.33 ± 11.80 days for the HAM group and 25.33 ± 5.32 days in the bare sclera group. The epithelization rate for the autologous fibrin group was faster compared to the other two groups. However all the results were not statistically significant (p value >0.05). There were no postoperative complications noted during the follow up. Autologous fibrin is comparable to HAM as a scaffold for cultivation of conjunctiva in the treatment of conjunctival defect.     

Cyclodextrin-Based Nanosponges for Delivery of Resveratrol: <Emphasis Type="Italic">In Vitro</Emphasis> Characterisation,Stability, Cytotoxicity and Permeation Study

The aim of this work was to increase the solubility, stability and permeation of resveratrol by complexation with cyclodextrin-based nanosponges (NS). Nanosponges are recently developed hyper-cross-linked cyclodextrin polymers nanostructured to form three-dimensional networks; they are obtained by reacting cyclodextrin with a cross-linker such as carbonyldiimidazole. They have been used to increase the solubility and stability of poorly soluble actives. This study aimed at formulating complexes of resveratrol with β-cyclodextrin nanosponges in different weight ratios. DSC, FTIR and X-ray powder diffraction (XRPD) studies confirmed the interaction of resveratrol with NS. XRPD showed that the crystallinity of resveratrol decrease after encapsulation. The particle sizes of resveratrol-loaded NS are in between 400 to 500 nm with low polydispersity indices. Zeta potential is sufficiently high to obtain a stable colloidal nanosuspension. TEM measurement also revealed a particle size around 400 nm for NS complexes. The in vitro release and stability of resveratrol complex were increased compared with plain drug. Cytotoxic studies on HCPC-I cell showed that resveratrol formulations were more cytotoxic than plain resveratrol. The permeation study indicates that the resveratrol NS formulation showed good permeation in pigskin. The accumulation study in rabbit mucosa showed better accumulation of resveratrol NS formulation than plain drug. These results signify that resveratrol NS formulation can be used for buccal delivery and topical application.     

Clear,Aqueous Topical Drop of Triamcinolone Acetonide

The objective of this study was to develop a clear aqueous mixed nanomicellar formulation (NMF) of triamcinolone acetonide (TA) with a combination of nonionic surfactant hydrogenated castor oil 60 (HCO-60) and octoxynol-40 (Oc-40). In order to delineate the effects of drug-polymer interactions on entrapment efficiency (EE), loading efficiency (LE), and critical micellar concentration (CMC), a design of experiment (DOE) was performed to optimize the formulation. In this study, full-factorial design has been used with HCO-60 and OC-40 as independent variables. All formulations were prepared following solvent evaporation and film rehydration method, characterized with size, polydispersity, shape, morphology, EE, LE, and CMC. A specific blend of HCO-60 and Oc-40 at a particular wt% ratio (5:1.5) produced highest drug EE, LE, and smallest CMC (0.0216 wt%). Solubility of TA in NMF improved 20 times relative to normal aqueous solubility. Qualitative ¹H NMR studies confirmed the absence of free drug in the outer aqueous NMF medium. Moreover, TA-loaded NMF appeared to be highly stable and well tolerated on human corneal epithelial cells (HCEC) and human retinal pigment epithelial cells (D407 cells). Overall, these studies suggest that TA in NMF is safe and suitable for human topical ocular drop application.     

Improved Ocular Delivery of Nepafenac by Cyclodextrin Complexation

Nepafenac is a nonsteroidal anti-inflammatory drug (NSAID), currently only available as 0.1% ophthalmic suspension (Nevanac®). This study utilized hydroxypropyl-β-cyclodextrin (HPBCD) to increase the water solubility and trans-corneal permeation of nepafenac. The nepafenac-HPBCD complexation in the liquid and solid states were confirmed by phase solubility, differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance spectroscopy (NMR) analyses. Nepafenac 0.1% ophthalmic solution was formulated using HPBCD (same pH and osmolality as that of Nevanac®) and pig eye trans-corneal permeation was studied versus Nevanac®. Furthermore, nepafenac content in cornea, sclera, iris, lens, aqueous humor, choroid, ciliary body, retina, and vitreous humor was studied in a continuous isolated pig eye perfusion model in comparison to the suspension and Nevanac®. Permeation studies using porcine corneas revealed that the solution formulation had a permeation rate 18 times higher than Nevanac®. Furthermore, the solution had 11 times higher corneal retention than Nevanac®. Drug distribution studies using porcine eyes revealed that the solution formulation enables detectable levels in various ocular tissues while the drug was undetectable by Nevanac®. The ocular solution formulation had a significantly higher drug concentration in the cornea compared to the suspension or Nevanac®.     

Silymarin: an insight to its formulation and analytical prospects

Silymarin, a potential phytochemical compound obtained from the seeds of Silybum marianum plant has been used as a hepatoprotective agent for more than a decade. So far, eight active components of silymarin flavonolignans have been identified, among which silibinin has been proven the most active. However, it had poor oral bioavailability due to extensive phase II metabolism, low permeability across intestinal epithelial cells, low aqueous solubility, and rapid excretion in bile and urine. Therefore it becomes necessary to understand all its formulation and analytical aspects from past to present, including all of its possible future prospects. In modern research scenario, nanotization strategies of drugs has served as a potential approach to enhance solubility, bioavailability and to develop a robust formulation. Several approaches have been utilized previously to enhance the solubility and bioavailability of silymarin to provide it a robust strength against physical, chemical, and environmental degradation. Nanoscale formulations such as nanoemulsion, nanosuspension, liposomes, and solid–lipid nanoparticles can be used to enhance solubility and to target them to desired cells with minimum harm to normal cells. However, many other approaches exist such as dendrimers, ceramic nanoparticles, and carbon nanotubes, which serve as a great vehicle in drug delivery to transport medicament at target sites. Therefore, the purpose of this review was to develop a better understanding of the problems associated with silymarin and approaches to overcome the difficulties to develop a better and stable formulation for food and pharmaceutical applications.     

Preparation and Bioavailability Assessment of SMEDDS Containing Valsartan

A self-microemulsifying drug delivery system (SMEDDS) has been developed to enhance diffusion rate and oral bioavailability of valsartan. The solubility of valsartan was checked in different oils, surfactants, and cosurfactants and ternary phase diagrams were constructed to evaluate the microemulsion domain. The valsartan SMEDDS was prepared using Capmul MCM (oil), Tween 80 (surfactant), and polyethylene glycol 400 (cosurfactant). The particle size distribution, zeta potential, and polydispersity index were determined and were found to be 12.3 nm, −0.746, and 0.138, respectively. Diffusion rate of valsartan was measured by in vitro dialysis bag method using phosphate buffer pH 6.8 as diffusion media. Developed high-performance liquid chromatography method was used to determine drug content in diffusion media. Oral bioavailability of valsartan SMEDDS was checked by using rabbit model. Results of diffusion rate and oral bioavailability of valsartan SMEDDS were compared with those of pure drug solution and of marketed formulation. Diffusion of valsartan SMEDDS showed maximum drug release when compared to pure drug solution and marketed formulation. The area under curve and time showed significant improvement as the values obtained were 607 ng h/mL and 1 h for SMEDDS in comparison to 445.36 and 1.36 h for market formulation suggesting significant increase (p < 0.01) in oral bioavailability of valsartan SMEDDS.     

Evaluation of Glycofurol-Based Gel as a New Vehicle for Topical Application of Naproxen

In view of the good skin tolerability, glycofurol was used as a vehicle-based gel, and its effect in the topical penetration of Naproxen (NAP) was investigated. The aims of this study were to develop a suitable gel with bioadhesive property, spreadability, and viscosity for topical anti-inflammatory effect. Three gelling and adhesive agents were examined: Carbopol 974P, Gantrez AN 119, and polyvinylpyrollidone K30. Skin permeation rates and lag times of NAP were evaluated using the Franz-type diffusion cell in order to optimize the gel formulation. The permeation rate of NAP-based gel across the excised rat skin was investigated. A significant increase in permeability parameters such as steady-state flux (J _ss), permeability coefficient (K _p), and penetration index (PI) was observed in optimized formulation containing 2% Transcutol as an permeation enhancer. From skin irritation test, it was concluded that the optimized novel glycofurol-based gel formulation was safe to be used for topical drug delivery. The developed glycofurol-based gel appeared promising for dermal and transdermal delivery of naproxen and could be applicable with water-insoluble drugs, which would circumvent most of the problems associated with drug therapy.     

Surface acetylation of polyamidoamine (PAMAM) dendrimers decreases cytotoxicity while maintaining membrane permeability

Improving the oral bioavailability of therapeutic compounds remains a challenging area of research. Polyamidoamine (PAMAM) dendrimers are promising candidates for oral drug delivery due to their well-defined compact structure, versatility of surface functionalities, low polydispersity, and ability to enhance transepithelial transport. However, potential cytotoxicity has hampered the development of PAMAM dendrimers for in vivo applications. In this article, we have systematically modified the surface groups of amine-terminated PAMAM dendrimers with acetyl groups. The effect of this modification on cytotoxicity, permeability, and cellular uptake was investigated on Caco-2 cell monolayers. Cytotoxicity was reduced by more than 10-fold as the number of surface acetyl groups increased while maintaining permeability across the cell monolayers. Furthermore, a decrease in nonspecific binding was evident for surface-modified dendrimers compared to their unmodified counterparts. These studies point to novel strategies for minimizing PAMAM dendrimer toxicity while maximizing their transepithelial permeability.     

Tri-block co-polymer nanocarriers for enhancement of oral delivery of felodipine: preparation,in vitro characterization and ex vivo permeation

This study aimed to prepare, optimize and characterize novel felodipine-loaded polymeric nanomicelles, using a pluronic mixture of F127 and P123. Thin-film hydration method was adopted for the preparation of different polymeric nanomicelles (T1–T12) according to a 4¹.3¹ full factorial design. Factors studied were: Pluronic®:drug ratio (P:D ratio) (10, 20, 30 and 40?w/w) and percent of hydrophilic polymer (F127%) (33.33%, 50% and 66.67% w/w). Optimization criteria were to maximize transmittance percent (T%) and entrapment efficiency percent (EE%) and to minimize particle size (PS) and polydispersity index (PDI). The optimized formulation was further characterized by DSC, FTIR and ¹H NMR studies. It was also subjected to stability testing and ex vivo permeation using rabbit intestines. Spherical nanomicelles of particle size ranging from 26.18 to 87.54?nm were successfully obtained. The optimized formulation was found to be the already prepared formulation T12 (P:D ratio of 40 and 66.67% F127) with suitable T% and EE% of 95.12% and 91.75%, respectively. DSC, FTIR and ¹H NMR studies revealed felodipine (FLD) incorporation within T12 nanomicelles. T12 enhanced the ex vivo intestinal permeation of FLD when compared to a drug suspension and showed good stability. Therefore, pluronic nanomicelles could be promising for improved oral delivery of FLD.     

MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Formulation and Evaluation of Lidocaine Lipid Nanosystems for Dermal Delivery

The objective of the present investigation was to formulate solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for improving the dermal delivery of a local anesthetic agent lidocaine (LID). SLN and NLC were characterized for particle size distribution, polydispersity index, entrapment efficiency, X-ray powder diffraction pattern (XRD), thermal behavior by differential scanning colorimeter (DSC) and surface morphology by transmission electron microscopy (TEM). LID-loaded SLN and NLC were formulated into hydrogels for topical application. The in vitro permeation profiles of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) were evaluated by using guinea pig skin. The in vivo efficacy of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) gel was evaluated on guinea pig using pinprick test. LID SLN showed a particle size of 78.1 nm with a polydispersity index of 0.556, whereas LID NLC showed a particle size of 72.8 nm with a polydispersity index of 0.463. The entrapment efficiency of LID in both SLN and NLC was 97% and 95.9%, respectively. The TEM studies revealed the almost spherical nature of LID SLN and NLC formulations. The XRD and DSC studies of LID SLN suggested amorphization of drug in the carrier system. The SLN formulation was stable with respect to particle size, polydispersity, and entrapment efficiency for 6 months at 40°C/75% relative humidity (RH). Negligible leakage was observed for the NLC formulation when stored for 1 month at 40°C/75% RH. In vitro permeation studies indicated that LID SLN gel and LID NLC gel significantly sustained the LID release compared to that of Xylocaine® gel. The in vivo efficacy results supported the results of the in vitro permeation studies wherein the LID SLN gel and LID NLC gel resulted in fivefold and sixfold increase in duration of anesthesia, respectively, compared to that of Xylocaine® gel.     

Nanocrystallization by Evaporative Antisolvent Technique for Solubility and Bioavailability Enhancement of Telmisartan

Telmisartan is an orally active nonpeptide angiotensin II receptor antagonist used in the management of hypertension. It is a Biopharmaceutics Classification System class II drug having aqueous solubility of 9.9 μg/ml. Telmisartan (TEL) nanocrystals were prepared by evaporative antisolvent precipitation technique using different stabilizers as PVPK30, TPGS, Poloxamer 188, and PEG 6000 in combination or singly. The nanosuspensions were characterized in terms of particle size distribution, zeta potential, and polydispersity index. The suspension containing PVPK30 and TPGS (1:1) showed least average particle size of 82.63 nm and polydispersity index of 0.472. The zeta potential of nanosuspensions ranged between 6.54 and 10.8 mV. An increase of 116.45% was evident in the specific surface area of the freeze-dried product. Contact angle of nanoparticles was also lowered to 27° as compared to 50.8° for TEL. Saturation solubility studies in various media revealed a significant increase in comparison to plain drug. An increase of 3.74× in saturation solubility in FaSSIF and 5.02× in FeSSIF was seen. In vitro dissolution profile of nanosuspension coated on pellets revealed release of 85% in water, 95% in 0.1 N HCl, and 75% in phosphate buffer in 30 min. Nanosuspensions were found to be stable in the presence of univalent and bivalent electrolytes. A tenfold increase in bioavailability was evident. Nanoparticles of telmisartan prepared by bottom-up technique proved to be effective in improving the oral bioavailability as a result of enhanced solubility and dissolution rate.Key words: biorelevant media, contact angle, specific surface area, telmisartan, TPGS     

A new Chlorin formulation promotes efficient photodynamic action in choriocapillaris of rabbit’s eyes

Age-related macular degeneration (AMD) as well as other choroidal diseases, demand novel therapeutic methods. Photodynamic therapy (PDT), which uses light and photosensitizer (PS) to cause specific vascular occlusion in the macula, is an interesting alternative. The only drug approved for the PDT treatment of AMD (Verteporfin) has a natural tendency to aggregate, demanding an expensive separation procedure during purification. We report a novel and affordable PS that is intrinsically protected against aggregation, the Monomeric Chlorin at High Concentration (MCHC-Chlorin), whose liposomal formulation was developed to provoke effective photodynamic action on the choroidal vasculature. Our report starts by stablishing the conditions to allow the efficient synthesis of MCHC-Chlorin in high yields (92%). We then tested the light stimulated occlusion of choriocapillary vessels in rabbit’s eyes induced by the two MCHC-Chlorin isomers, which are directly obtained from the synthetic route. The PS formulation was infused in the rabbit’s ear vein and eyes were immediately irradiated at 650?nm. Indirect ophthalmoscopy, fundus photography, fluorescein angiography and histopathological evaluations were used to evaluate levels of photo-thrombosis and collateral damage. Choriocapillary occlusion was achieved in all treated rabbits’ eyes, while retina and sclera were completely preserved. There was no photochemical reaction in none of the eyes that received LASER without PS. Both MCHC-Chlorin isomers were separately tested and exhibited similar positive results with no systemic toxicity. Therefore, PDT occurred equally well in all treated eyes and none of the controls showed any effect in the ophthalmological exams. MCHC-Chlorin offers great potential and should be further studied as an alternative drug for choroidal diseases.     

Click synthesis of estradiol–cyclodextrin conjugates as cell compartment selective estrogens

Cyclodextrin (CD) is a well known drug carrier and excipient for enhancing aqueous solubility. CDs themselves are anticipated to have low membrane permeability because of relatively high hydrophilicity and molecular weight. CD derivatization with 17-beta estradiol (E₂) was explored extensively using a number of different click chemistries and the cell membrane permeability of synthetic CD–E₂ conjugate was explored by cell reporter assays and confocal fluorescence microscopy. In simile with reported dendrimer–E₂ conjugates, CD–E₂ was found to be a stable, extranuclear receptor selective estrogen that penetrated into the cytoplasm.     

Eudragit-Based Nanosuspension of Poorly Water-Soluble Drug: Formulation and In Vitro–In Vivo Evaluation

The present study was performed to investigate potential of Eudragit RLPO-based nanosuspension of glimepiride (Biopharmaceutical Classification System class II drug), for the improvement of its solubility and overall therapeutic efficacy, suitable for peroral administration. Nanoprecipitation method being simple and less sophisticated was optimized for the preparation of nanosuspension. Physicochemical characteristics of nanosuspension in terms of size, zeta potential, polydispersity index, entrapment efficiency (% EE) and in vitro drug release were found within their acceptable ranges. The size of the nanoparticles was most strongly affected by agitation time while % EE was more influenced by the drug/polymer ratio. Differential scanning calorimetry and X-ray diffraction studies provided evidence that enhancement in solubility of drug resulted due to change in crystallinity of drug within the formulation. Stability study revealed that nanosuspension was more stable at refrigerated condition with no significant changes in particle size distribution, % EE, and release characteristics for 3 months. In vivo studies were performed on nicotinamide–streptozotocin-induced diabetic rat models for pharmacokinetic and antihyperglycaemic activity. Nanosuspension increased maximum plasma concentration, area under the curve, and mean residence time values significantly as compared to aqueous suspension. Oral glucose tolerance test and antihyperglycaemic studies demonstrated plasma glucose levels were efficiently controlled in case of nanosuspension than glimepiride suspension. Briefly, sustained and prolonged activity of nanosuspensions could reduce dose frequency, decrease drug side effects, and improve patient compliance. Therefore, glimepiride nanosuspensions can be expected to gain considerable attention in the treatment of type 2 diabetes mellitus due to its improved therapeutic activity.KEY WORDS: diabetes mellitus, glimepiride, nanoprecipitation, poloxamer, sustained release