Excess intracellular concentration of the pSC101 RepA protein interferes with both plasmid DNA replication and partitioning.

RepA, a plasmid-encoded gene product required for pSC101 replication in Escherichia coli, is shown here to inhibit the replication of pSC101 in vivo when overproduced 4- to 20-fold in trans. Unlike plasmids whose replication is prevented by mutations in the repA gene, plasmids prevented from replicating by overproduction of the RepA protein were lost rapidly from the cell population instead of being partitioned evenly between daughter cells. Removal of the partition (par) locus increased the inhibitory effect of excess RepA on replication, while host and plasmid mutations that compensate for the absence of par, or overproduction of the E. coli DnaA protein, diminished it. A repA mutation (repA46) that elevates pSC101 copy number almost entirely eliminated the inhibitory effect of RepA at high concentration and stimulated replication when the protein was moderately overproduced. As the RepA protein can exist in both monomer and dimer forms, we suggest that overproduction promotes RepA dimerization, reducing the formation of replication initiation complexes that require the RepA monomer and DnaA; we propose that the repA46 mutation alters the ability of the mutant protein to dimerize. Our discovery that an elevated intracellular concentration of RepA specifically impedes plasmid partitioning implies that the RepA-containing complexes initiating pSC101 DNA replication participate also in the distribution of plasmids at cell division.     

Control of replication of plasmid R1: the intergenic region between copA and repA modulates the level of expression of repA

The RepA protein of plasmid R1 is rate-limiting for initiation of R1 replication. Its synthesis is mainly regulated by interactions of the antisense RNA, CopA, with the leader region of the RepA mRNA, CopT. This work describes the characterization of several mutants with sequence alterations in the intergenic region between the copA gene and the repA reading frame. The analysis showed that most of the mutations led both to a decrease in stability of maintenance of mini-R1 derivatives and to lowered repA expression assayed in translational repA-lacZ fusion constructs. Destruction of the copA gene and replacement of the upstream region by the tac promoter in the latter constructs indicated that these mutations per se alter the expression of repA. In addition, we show that particular mutations in this region can directly affect CopA-mediated control, either by changing the kinetics of interaction of CopA RNA with the RepA mRNA and/or by modifying the activity of the copA promoter. These data indicate the importance of the region analysed in the process that controls R1 replication.     

Expression and regulation of the RepA protein of the RepFIB replicon from plasmid P307.

The control of RepFIB replication appears to rely on the interaction between an initiator protein (RepA) and two sets of DNA repeat elements located on either side of the repA gene. Limited N-terminal sequence information obtained from a RepA:beta-galactosidase fusion protein indicates that although the first residue of RepA is methionine, the initiation of translation of RepA occurs from a CTG codon rather than from the predicted GTG codon located further downstream. Overexpressed RepA in trans is capable of repressing a repA:lacZ fusion plasmid in which the expression of the fusion protein is under the control of the repA promoter. The repA promoter has been located functionally by testing a series of repA:lacZ fusion plasmids. Both in vivo genetic tests and in vitro DNA-binding studies indicate that repA autoregulation can be achieved by RepA binding to one or more repeat elements which overlap the repA promoter sequence.     

Boundaries of the pSC101 minimal replicon are conditional.

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.     

Isolation and characterization of plasmid mutations that enable partitioning of pSC101 replicons lacking the partition (par) locus.

Second-site mutations that allow stable inheritance of partition-defective pSC101 plasmids mapped to seven distinct sites in the 5' half of the plasmid repA gene. While the mutations also elevated pSC101 copy number, there was no correlation between copy number increase and plasmid stability. Combinations of mutations enabled pSC101 DNA replication in the absence of integration host factor and also stabilized par-deleted plasmids in cells deficient in DNA gyrase or defective in DnaA binding. Our findings suggest that repA mutations compensate for par deletion by enabling the origin region RepA-DNA-DnaA complex to form under suboptimal conditions. They also provide evidence that this complex has a role in partitioning that is separate from its known ability to promote plasmid DNA replication.     

Function of the N-terminal half of RepA in activation of Rts1 ori.

The RepA protein of the Rts1 plasmid, consisting of 288 amino acids, is a trans-acting protein essential for replication. A mutant repA gene, repA delta C143, carrying a deletion that removed the 143 C-terminal amino acids of RepA, could transform, but at a low frequency, an Escherichia coli polA strain, JG112, when repA delta C143 was cloned into pBR322 with Rts1 ori in the natural configuration. The transformation was less efficient without the dyad DnaA box in the ori region, and no transformation occurred at 42 degrees C, characteristic of Rts1 replication. A fusion of the 3'-terminal half of repA of the P1 plasmid to repA delta C143 yielded a pBR322 chimeric plasmid that contained Rts1 ori through hybrid (Rts1-P1) repA. This plasmid was maintained much more stably in JG112 at 37 degrees C. At 42 degrees C, however, it was quite unstable. The overproduced hybrid RepA protein showed interference with mini-Rts1 replication in trans and also exhibited an autorepressor function, although both activities were decreased. These findings suggest that the N-terminal half of the RepA molecule of Rts1 is involved in the activation of the replication origin.     

How the R1 replication control system responds to copy number deviations

The copy number of R1 and of a repA-lacZ gene fusion was increased above normal by coupling to a plasmid which is present at a fivefold higher copy number at 30 degrees C. This carrier plasmid is deficient in replication at 42 degrees C, and it was thus possible after a temperature shift to analyze the response to the increased plasmid concentration of the R1 replication control system. Both the frequency of replication per plasmid molecule and the rate of repA expression per gene copy were reduced under these conditions, and the data strongly suggest that there is an inverse proportionality between the specific rate of plasmid replication viz repA expression and the copy number/gene dosage of the plasmid.     

Essential DNA sequence for the replication of Rts1.

The promoter sequence of the mini-Rts1 repA gene encoding the 33,000-dalton RepA protein that is essential for replication was defined by RNA polymerase protection experiments and by analyzing RepA protein synthesized in maxicells harboring mini-Rts1 derivatives deleted upstream of or within the presumptive promoter region. The -10 region of the promoter which shows homology to the incII repeat sequences overlaps two inverted repeats. One of the repeats forms a pair with a sequence in the -35 region, and the other forms a pair with the translation initiation region. The replication origin region, ori(Rts1), which was determined by supplying RepA protein in trans, was localized within 188 base pairs in a region containing three incII repeats and four GATC sequences. Dyad dnaA boxes that exist upstream from the GATC sequences appeared to be dispensable for the origin function, but deletion of both dnaA boxes from ori(Rts1) resulted in reduced replication frequency, suggesting that host-encoded DnaA protein is involved in the replication of Rts1 as a stimulatory element. Combination of the minimal repA and ori(Rts1) segments, even in the reverse orientation compared with the natural sequence, resulted in reconstitution of an autonomously replicating molecule.     

The structure and function of the replication initiator protein (Rep) of pSC101: an analysis based on a novel positive-selection system for the replication-deficient mutants

Plasmid pSC101 encodes a 37.5 kDa Rep (RepA) protein, which binds to three 21-base repeats (DR-1, DR-2, and DR-3) in the replication origin region (ori) of the plasmid to initiate replication. Rep also binds to two palindromic sequences (IR-1 and IR-2) which overlap the rep promoter. The binding of Rep to IR-2 represses the production of Rep itself. It is highly likely that the balance of these functions of Rep plays a major role in controlling the copy number of pSC101. In this study, we developed a positive-selection system for replication-deficient mutants of the initiator protein. This system can be applied to the study of other replication systems by changing ori and rep of pSC101 to the corresponding genes. Thirty-four replication-deficient (Ini(-)) mutants were isolated with this system, and analyzed as to the relation between the structure and function of the Rep protein. Seventeen of these 34 Ini(-) mutants were found to lack auto-repressor activity as well as initiator activity. DNA sequence analysis showed that one-third (from the C-terminus) of Rep is dispensable for the auto-repressor activity, while the initiator activity seems to require the whole protein.     

New pSC101-derivative cloning vectors with elevated copy numbers

Mutations that increase the copy number of the pSC101 replicon have been used for construction of new cloning vectors. Replacement of glutamate at position 93 in RepA yields plasmids that replicate at medium (27 copies/cell) and high (approximately 240 copies/cell) copy numbers. Based on the crystal structure of RepE, a structurally similar replication initiator protein from the F factor, the pSC101 repA mutants are predicted to be defective in dimerization. The cloning vectors permit increased expression of gene products along with the advantages of pSC101-derivative plasmids, including stable maintenance and compatibility with ColE1 plasmids. The plasmids also allow blue/white screening for DNA inserts and impart resistance to ampicillin, chloramphenicol and kanamycin. The vectors were used in a genetic assay to suppress temperature-sensitive mutants of ffh, encoding the protein component of the Escherichia coli signal recognition particle, by overproduction of 4.5S RNA. While expression of 4.5S RNA from a wild type pSC101-derivative plasmid was not sufficient for suppression, use of the new vectors did suppress the temperature-sensitive phenotype.     

Plasmid pSC101 replication mutants generated by insertion of the transposon Tn1000

A derivative of pSC101, pLC709, was constructed by ligation of the HincII-A fragment of pSC101 to the mini-colEI plasmid pVH51 and to a DNA fragment encoding resistance to the antibiotics streptomycin and spectinomycin. Insertions of the transposon Tn1000 (gamma-delta) into the pSC101 replication region of pLC709 were isolated following cotransfer of the plasmid with the sex factor F. The sites of insertion of the transposon were determined by restriction enzyme analysis and the replication and incompatibility properties of the insertion plasmids and DNA fragments cloned from them were analysed. The insertion mutations defined a locus, inc, of approximately 200 base-pairs that is responsible for pSC101-specific incompatibility. Two mutations adjacent to this region inactivate pSC101 replication but can be complemented in trans by a wild-type pSC101 plasmid, and thus define a trans-acting replication function, rep. The inc locus is within a larger region of some 450 base-pairs that is essential for pSC101 replication and that includes the origin of replication. This 450 base-pair segment can replicate in the presence of a helper plasmid that supplies the rep function in trans.     

Involvement of integration host factor (IHF) in maintenance of plasmid pSC101 in Escherichia coli: characterization of pSC101 mutants that replicate in the absence of IHF

Escherichia coli mutants defective in the stable maintenance of plasmid pSC101 have been isolated following Tn10 insertion mutagenesis. One class of mutations affecting pSC101 replication was located in the genes himA and himD (hip), which encode the two subunits of integration host factor (IHF), a small histonelike DNA-binding protein that has multiple cellular functions. Mutants of pSC101 that could replicate in the absence of IHF were isolated and characterized; four independent mutational alterations were found to affect the third codon of the pSC101 rep gene, resulting in the replacement of glutamic acid by lysine. The compensating alteration appears to function by altering the activity of the pSC101 rep protein in him mutants.     

Trans- and cis-acting elements for the replication of P1 miniplasmids

Replication-deficient mutants of the unit-copy miniplasmid lambda-P1:5R were isolated after hydroxylamine mutagenesis. Complementation tests showed that the majority of these mutants are defective in the production of the repA protein product. Two of these mutants have suppressible nonsense (amber) mutations. The DNA sequence of one of these, repA103, has been determined. The lesion lies within the repA open reading frame, showing that the repA product is essential for plasmid replication. Complementation of deletion mutants of lambda-P1:5R by repA protein showed that the origin of replication lies to the left of repA and that this 300-base-pair origin region is the only portion of the DNA essential for plasmid replication if repA protein is supplied in trans. Six of the 21 hydroxylamine-induced mutants were not complemented by repA. Replication of three of these could be restored by introduction into the plasmid of a wild-type origin region, suggesting that they were origin-defective. The DNA sequence of two mutants was determined. Mutant rep-11 has a 43-base-pair deletion within the incC sequence (incC is a series of five direct repeats of a 19-base-pair sequence known to be involved in the regulation of plasmid replication). The deletion appears to have been generated by homologous recombination between two repeats. Mutant rep-30 has a single base substitution in a region just to the left of incC that destroys one of five G-A-T-C (dam methylation) sites in this region. As lambda-P1:5R is unable to establish itself as a plasmid in a methylase-defective (dam-) strain, it seems probable that methylation of the G-A-T-C sequences is important for origin function. The incC region and the sequences to its left appear to constitute an essential part of the origin of replication.