Engineered Pseudomonas putida simultaneously catabolizes five major components of corn stover lignocellulose: Glucose,xylose, arabinose,p-coumaric acid,and acetic acid

Valorization of all major lignocellulose components, including lignin, cellulose, and hemicellulose is critical for an economically viable bioeconomy. In most biochemical conversion approaches, the standard process separately upgrades sugar hydrolysates and lignin. Here, we present a new process concept based on an engineered microbe that could enable simultaneous upgrading of all lignocellulose streams, which has the ultimate potential to reduce capital cost and enable new metabolic engineering strategies. Pseudomonas putida is a robust microorganism capable of natively catabolizing aromatics, organic acids, and D-glucose. We engineered this strain to utilize D-xylose by tuning expression of a heterologous D-xylose transporter, catabolic genes xylAB, and pentose phosphate pathway (PPP) genes tal-tkt. We further engineered L-arabinose utilization via the PPP or an oxidative pathway. This resulted in a growth rate on xylose and arabinose of 0.32 h⁻¹ and 0.38 h⁻¹, respectively. Using the oxidative L-arabinose pathway with the PPP xylose pathway enabled D-glucose, D-xylose, and L-arabinose co-utilization in minimal medium using model compounds as well as real corn stover hydrolysate, with a maximum hydrolysate sugar consumption rate of 3.3 g/L/h. After modifying catabolite repression, our engineered P. putida simultaneously co-utilized five representative compounds from cellulose (D-glucose), hemicellulose (D-xylose, L-arabinose, and acetic acid), and lignin-related compounds (p-coumarate), demonstrating the feasibility of simultaneously upgrading total lignocellulosic biomass to value-added chemicals.     

Development of genetic tools for heterologous protein expression in a pentose-utilizing environmental isolate of Pseudomonas putida

Pseudomonas putida has emerged as a promising host for the conversion of biomass-derived sugars and aromatic intermediates into commercially relevant biofuels and bioproducts. Most of the strain development studies previously published have focused on P. putida KT2440, which has been engineered to produce a variety of non-native bioproducts. However, P. putida is not capable of metabolizing pentose sugars, which can constitute up to 25% of biomass hydrolysates. Related P. putida isolates that metabolize a larger fraction of biomass-derived carbon may be attractive as complementary hosts to P. putida KT2440. Here we describe genetic tool development for P. putida M2, a soil isolate that can metabolize pentose sugars. The functionality of five inducible promoter systems and 12 ribosome binding sites was assessed to regulate gene expression. The utility of these expression systems was confirmed by the production of indigoidine from C6 and C5 sugars. Chromosomal integration and expression of non-native genes was achieved by using chassis-independent recombinase-assisted genome engineering (CRAGE) for single-step gene integration of biosynthetic pathways directly into the genome of P. putida M2. These genetic tools provide a foundation to develop hosts complementary to P. putida KT2440 and expand the ability of this versatile microbial group to convert biomass to bioproducts.     

Recent advances in metabolic engineering of Corynebacterium glutamicum for bioproduction of value-added aromatic chemicals and natural products

Recent progress in synthetic and systems metabolic engineering technologies has explored the potential of microbial cell factories for the production of industrially relevant bulk and fine chemicals from renewable biomass resources in an eco-friendly manner. Corynebacterium glutamicum, a workhorse for industrial amino acid production, has currently evolved into a promising microbial platform for bioproduction of various natural and non-natural chemicals from renewable feedstocks. Notably, it has been recently demonstrated that metabolically engineered C. glutamicum can overproduce several commercially valuable aromatic and related chemicals such as shikimate, 4-hydroxybenzoate, and 4-aminobenzoate from sugars at remarkably high titer suitable to commercial application. On the other hand, overexpression and/or extension of its endogenous metabolic pathways by integrating heterologous metabolic pathways enabled production of structurally intricate and valuable natural chemicals like plant polyphenols, carotenoids, and fatty acids. In this review, we summarize recent advances in metabolic engineering of C. glutamicum for production of those value-added aromatics and other natural products, which highlights high potential and the versatility of this microbe for bioproduction of diverse chemicals.

     

Biotransformation of 5‐Hydroxymethylfurfural to 2,5‐Furandicarboxylic Acid by a Syntrophic Consortium of Engineered Synechococcus elongatus and Pseudomonas putida

2,5‐furandicarboxylic acid (FDCA) is one of the top platform chemicals that can be produced from biomass feedstock. To make the cost of industrial FDCA production compatible with plastics made from fossils, the price of substrates and process complexity should be reduced. The aim of this research is to create a CO₂‐driven syntrophic consortium for the catalytic conversion of renewable biomass‐derived 5‐hydroxymethylfurfural (HMF) to FDCA. Sucrose produced from carbon fixation by the engineered Synechococcus elongatus serves as the sole carbon source for the engineered Pseudomonas putida to catalyze the reaction of HMF to FDCA. The yield of FDCA by the consortium reaches around 70% while the conversion of HMF is close to 100%. With further surface engineering to clump the two strains, the FDCA yield is elevated to almost 100% via the specific association between an Src homology 3 (SH3) domain and its ligand. The syntrophic consortium successfully demonstrates its green and cost‐effective characteristics for the conversion of CO₂ and biomass into platform chemicals.     

<Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> as a potent biocatalyst for the bioconversion of pentose sugars to value-added products

Corynebacterium glutamicum, the industrial microbe traditionally used for the production of amino acids, proved its value for the fermentative production of diverse products through genetic/metabolic engineering. A successful demonstration of the heterologous expression of arabinose and xylose utilization genes made them interesting biocatalysts for pentose fermentation, which are the main components in lignocellulosic hydrolysates. Its ability to withstand substantial amount of general growth inhibitors like furfurals, hydroxyl methyl furfurals and organic acids generated from the acid/alkali hydrolysis of lignocellulosics in growth arrested conditions and its ability to produce amino acids like glutamate and lysine in acid hydrolysates of rice straw and wheat bran, indicate the future prospective of this bacterium as a potent biocatalyst in fermentation biotechnology. However, the efforts so far on these lines have not yet been reviewed, and hence an attempt is made to look into the efficacy and prospects of C. glutamicum to utilize the normally non-fermentable pentose sugars from lignocellulosic biomass for the production of commodity chemicals.     

Improved <Emphasis Type="Italic">p</Emphasis>-hydroxybenzoate production by engineered <Emphasis Type="Italic">Pseudomonas putida</Emphasis> S12 by using a mixed-substrate feeding strategy

The key precursors for p-hydroxybenzoate production by engineered Pseudomonas putida S12 are phosphoenolpyruvate (PEP) and erythrose-4-phosphate (E4P), for which the pentose phosphate (PP) pathway is an important source. Since PP pathway fluxes are typically low in pseudomonads, E4P and PEP availability is a likely bottleneck for aromatics production which may be alleviated by stimulating PP pathway fluxes via co-feeding of pentoses in addition to glucose or glycerol. As P. putida S12 lacks the natural ability to utilize xylose, the xylose isomerase pathway from E. coli was introduced into the p-hydroxybenzoate producing strain P. putida S12palB2. The initially inefficient xylose utilization was improved by evolutionary selection after which the p-hydroxybenzoate production was evaluated. Even without xylose-co-feeding, p-hydroxybenzoate production was improved in the evolved xylose-utilizing strain, which may indicate an intrinsically elevated PP pathway activity. Xylose co-feeding further improved the p-hydroxybenzoate yield when co-fed with either glucose or glycerol, up to 16.3 Cmol% (0.1 g p-hydroxybenzoate/g substrate). The yield improvements were most pronounced with glycerol, which probably related to the availability of the PEP precursor glyceraldehyde-3-phosphate (GAP). Thus, it was demonstrated that the production of aromatics such as p-hydroxybenzoate can be improved by co-feeding different carbon sources via different and partially artificial pathways. Moreover, this approach opens new perspectives for the efficient production of (fine) chemicals from renewable feedstocks such as lignocellulose that typically has a high content of both glucose and xylose and (crude) glycerol.     

A versatile Pseudomonas putida KT2440 with new ability: selective oxidation of 5-hydroxymethylfurfural to 5-hydroxymethyl-2-furancarboxylic acid

Currently, biotransformation of 5-hydroxymethylfurfural (HMF) into a series of high-value bio-based platform chemicals is massively studied. In this study, selective biooxidation of HMF to 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) by Pseudomonas putida KT2440 with superior titer, yield, and productivity was reported. The biocatalytic performances of P. putida KT2440 were optimized separately. Under optimal conditions, 100% yield of HMFCA was obtained when HMF concentration was less than 150 mM, while the maximum concentration of 155 mM was achieved from 160 mM HMF in 12 h. P. putida KT2440 was highly tolerate to HMF, up to 190 mM. Besides, it was capable of selective oxidation of other furan aldehydes to the corresponding carboxylic acids with good yield of 100%. This study further demonstrates the potential of P. putida KT2440 as a biocatalyst for biomass conversion, as this strain has been proved the capacity to convert and utilize many kinds of biomass-derived sugars and ligin-derived aromatic compounds.

     

Channelling carbon flux through the meta-cleavage route for improved poly(3-hydroxyalkanoate) production from benzoate and lignin-based aromatics in Pseudomonas putida H

Lignin-based aromatics are attractive raw materials to derive medium-chain length poly(3-hydroxyalkanoates) (mcl-PHAs), biodegradable polymers of commercial value. So far, this conversion has exclusively used the ortho-cleavage route of Pseudomonas putida KT2440, which results in the secretion of toxic intermediates and limited performance. Pseudomonas putida H exhibits the ortho- and the meta-cleavage pathways where the latter appears promising because it stoichiometrically yields higher levels of acetyl-CoA. Here, we created a double-mutant H-ΔcatAΔA2 that utilizes the meta route exclusively and synthesized 30% more PHA on benzoate than the parental strain but suffered from catechol accumulation. The single deletion of the catA2 gene in the H strain provoked a slight attenuation on the enzymatic capacity of the ortho route (25%) and activation of the meta route by nearly 8-fold, producing twice as much mcl-PHAs compared to the wild type. Inline, the mutant H-ΔcatA2 showed a 2-fold increase in the intracellular malonyl-CoA abundance – the main precursor for mcl-PHAs synthesis. As inferred from flux simulation and enzyme activity assays, the superior performance of H-ΔcatA2 benefited from reduced flux through the TCA cycle and malic enzyme and diminished by-product formation. In a benzoate-based fed-batch, P. putida H-ΔcatA2 achieved a PHA titre of 6.1 g l^–1 and a volumetric productivity of 1.8 g l^–1 day^–1. Using Kraft lignin hydrolysate as feedstock, the engineered strain formed 1.4 g l^{- 1} PHA. The balancing of carbon flux between the parallel catechol-degrading routes emerges as an important strategy to prevent intermediate accumulation and elevate mcl-PHA production in P. putida H and, as shown here, sets the next level to derive this sustainable biopolymer from lignin hydrolysates and aromatics.     

Improved bioconversion of lignocellulosic biomass by Saccharomyces cerevisiae engineered for tolerance to acetic acid

Lignocellulosic biomass has considerable potential for the production of fuels and chemicals as a promising alternative to conventional fossil fuels. However, the bioconversion of lignocellulosic biomass to desired products must be improved to reach economic viability. One of the main technical hurdles is the presence of inhibitors in biomass hydrolysates, which hampers the bioconversion efficiency by biorefinery microbial platforms such as Saccharomyces cerevisiae in terms of both production yields and rates. In particular, acetic acid, a major inhibitor derived from lignocellulosic biomass, severely restrains the performance of engineered xylose‐utilizing S. cerevisiae strains, resulting in decreased cell growth, xylose utilization rate, and product yield. In this study, the robustness of XUSE, one of the best xylose‐utilizing strains, was improved for the efficient conversion of lignocellulosic biomass into bioethanol under the inhibitory condition of acetic acid stress. Through adaptive laboratory evolution, we successfully developed the evolved strain XUSAE57, which efficiently converted xylose to ethanol with high yields of 0.43–0.50 g ethanol/g xylose even under 2–5 g/L of acetic stress. XUSAE57 not only achieved twofold higher ethanol yields but also improved the xylose utilization rate by more than twofold compared to those of XUSE in the presence of 4 g/L of acetic acid. During fermentation of lignocellulosic hydrolysate, XUSAE57 simultaneously converted glucose and xylose with the highest ethanol yield reported to date (0.49 g ethanol/g sugars). This study demonstrates that the bioconversion of lignocellulosic biomass by an engineered strain could be significantly improved through adaptive laboratory evolution for acetate tolerance, which could help realize the development of an economically feasible lignocellulosic biorefinery to produce fuels and chemicals.     

Production of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from Gluconate and Glucose by Recombinant Aeromonas hydrophila and Pseudomonas putida

Aeromonas hydrophila 4AK4 and Pseudomonas putida GPp104 were genetically engineered to synthesize poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) using gluconate and glucose rather than fatty acids. A truncated tesA gene, encoding cytosolic thioesterase I of Escherichia coli which catalyzes the conversion of acyl-ACP into free fatty acids, was introduced into A. hydrophila 4AK4. When grown in gluconate, the recombinant A. hydrophila 4AK4 synthesized 10% (w/w) PHBHHx containing 14% (mol/mol) 3-hydroxyhexanoate. If additional PHBHHx synthesis genes, phaPCJ, were over-expressed with the truncated tesA in A. hydrophila 4AK4, the PHBHHx content increased to 15% (w/w) and contained 19% (mol/mol) 3-hydroxyhexanoate. Recombinant P. putida GPp104 harboring phaC encoding PHBHHx synthase of A. hydrophila, phaB encoding acetoacetyl-CoA reductase of Wautersia eutropha and phaG encoding 3-hydroxyacyl-ACP-CoA transferase of P. putida, synthesized 19% (w/w) PHBHHx containing 5% (mol/mol) 3-hydroxyhexanoate from glucose. The results suggest that the engineered pathways were applicable to synthesize PHBHHx from unrelated carbon sources such as gluconate and glucose.     

Revealing oxidative pentose metabolism in new Pseudomonas putida isolates

The Pseudomonas putida group in the Gammaproteobacteria has been intensively studied for bioremediation and plant growth promotion. Members of this group have recently emerged as promising hosts to convert intermediates derived from plant biomass to biofuels and biochemicals. However, most strains of P. putida cannot metabolize pentose sugars derived from hemicellulose. Here, we describe three isolates that provide a broader view of the pentose sugar catabolism in the P. putida group. One of these isolates clusters with the well-characterized P. alloputida KT2440 (Strain BP6); the second isolate clustered with plant growth-promoting strain P. putida W619 (Strain M2), while the third isolate represents a new species in the group (Strain BP8). Each of these isolates possessed homologous genes for oxidative xylose catabolism (xylDXA) and a potential xylonate transporter. Strain M2 grew on arabinose and had genes for oxidative arabinose catabolism (araDXA). A CRISPR interference (CRISPRi) system was developed for strain M2 and identified conditionally essential genes for xylose growth. A glucose dehydrogenase was found to be responsible for initial oxidation of xylose and arabinose in strain M2. These isolates have illuminated inherent diversity in pentose catabolism in the P. putida group and may provide alternative hosts for biomass conversion.     

Conversion of biomass hydrolysates and other substrates to ethanol and other chemicals by Lactobacillus buchneri*

Aims: A Lactobacillus buchneri strain NRRL B‐30929 can convert xylose and glucose into ethanol and chemicals. The aims of the study were to survey three strains (NRRL B‐30929, NRRL 1837 and DSM 5987) for fermenting 17 single substrates and to exam NRRL B‐30929 for fermenting mixed substrates from biomass hydrolysates. Methods and Results: Mixed acid fermentation was observed for all three L. buchneri strains using various carbohydrates; the only exception was uridine which yielded lactate, acetate and uracil. Only B‐30929 is capable of utilizing cellobiose, a desired trait in a potential biocatalyst for biomass conversion. Flask fermentation indicated that the B‐30929 strain can use all the sugars released from pretreated hydrolysates, and producing 1·98–2·35 g l^?1 ethanol from corn stover hydrolysates and 2·92–3·01 g l^?1 ethanol from wheat straw hydrolysates when supplemented with either 0·25× MRS plus 1% corn steep liquor or 0·5× MRS. Conclusions: The L. buchneri NRRL B‐30929 can utilize mixed sugars in corn stover and wheat straw hydrolysates for ethanol and other chemical production. Significance and Impact of the Study: These results are valuable for future research in engineering L. buchneri NRRL B‐30929 for fermentative production of ethanol and chemicals from biomass.     

Xylose Assimilation for the Efficient Production of Biofuels and Chemicals by Engineered Saccharomyces cerevisiae

Microbial conversion of plant biomass into fuels and chemicals offers a practical solution to global concerns over limited natural resources, environmental pollution, and climate change. Pursuant to these goals, researchers have put tremendous efforts and resources toward engineering the yeast Saccharomyces cerevisiae to efficiently convert xylose, the second most abundant sugar in lignocellulosic biomass, into various fuels and chemicals. Here, recent advances in metabolic engineering of yeast is summarized to address bottlenecks on xylose assimilation and to enable simultaneous co-utilization of xylose and other substrates in lignocellulosic hydrolysates. Distinct characteristics of xylose metabolism that can be harnessed to produce advanced biofuels and chemicals are also highlighted. Although many challenges remain, recent research investments have facilitated the efficient fermentation of xylose and simultaneous co-consumption of xylose and glucose. In particular, understanding xylose-induced metabolic rewiring in engineered yeast has encouraged the use of xylose as a carbon source for producing various non-ethanol bioproducts. To boost the lignocellulosic biomass-based bioeconomy, much attention is expected to promote xylose-utilizing efficiency via reprogramming cellular regulatory networks, to attain robust co-fermentation of xylose and other cellulosic carbon sources under industrial conditions, and to exploit the advantageous traits of yeast xylose metabolism for producing diverse fuels and chemicals.     

Bioconversion of lignin model compounds with oleaginous <Emphasis Type="Italic">Rhodococci</Emphasis>

Although economically efficient biomass conversion depends on the utilization of the complete cell wall (biorefinery concept), including polysaccharides and lignin, current biofuels research concentrate mostly on cellulose conversion, while lignin is viewed as a side-product that is used primarily as a thermal resource. Microbiological conversion of lignin is almost exclusive to fungi, usually resulting in increased cell mass and lignolytic enzymes. Some bacteria can also degrade lignin-related compounds using the β-ketoadipate pathway; for example, Rhodococcus opacus DSM 1069 can degrade coniferyl alcohol and grow on it as sole carbon source. Moreover, this strain belongs to the actinomycetes group that is also known for oleaginous species with lipid accumulation over 20%. Present work shows that R. opacus DSM 1069 and PD630 strains under nitrogen limiting conditions can convert lignin model compounds into triacylglycerols, also known as neutral lipids. 4-Hydroxybenzoic and vanillic acid lignin model compounds were used as sole carbon sources, and after brief adaptation periods, the cells not only began growing but accumulated lipids to the level of oleaginicity. These lipids were extracted for transesterification and analysis of fatty acid methyl esters showed good composition for biodiesel applications with no aromatics. Furthermore, the two strains showed distinct substrate metabolism and product profiles.     

Survival and Impact of Genetically Engineered Pseudomonas putida Harboring Mercury Resistance Gene in Aquatic Microcosms

The survival of wild-type and genetically engineered Pseudomonas putida PpY101 that contained a recombinant plasmid pSR134 conferring mercury resistance were monitored in aquatic microcosms. We used lake, river, and spring water samples. The density of genetically engineered and wild-type P. putida decreased rapidly within 5 days (population change rate k -0.87 ~ -1.00 day^?1), then moderately after 5 to 28 days (-0.10~, -0.14 day^?1). The population change rates of genetically engineered and wild-type P. putida were not significantly different. We studied the important factors affecting the survival of genetically engineered and wild-type P. putida introduced in aquatic microcosms. Visible light exerted an adverse effect on the survival of the two strains. The densities of genetically engineered and wild-type P. putida were almost constant until 7 days after inoculation in natural water filtered with a 0.45-µm membrane filter, or treated with cycloheximide to inhibit the growth of protozoa. These results suggested that protozoan predation was one of the most important factors for the survival of two strains. We examined the impact of the addition of genetically engineered and wild-type P. putida on indigenous bacteria and protozoa. Inoculation of genetically engineered or wild-type P. putida had no apparent effect on the density of indigenous bacteria. The density of protozoa increased in microcosms inoculated with genetically engineered or wild-type P. putida at 3 days after inoculation, but after 5 to 21 days, the density of protozoa decreased to the same level as the control microcosms.     

Leaching of zinc from an industrial filter dust withPenicillium,Pseudomonas andCorynebacterium: Citric acid is the leaching agent rather than amino acids

Summary Heterotrophic microorganisms are able to solubilize metals via excreted metabolites-most often di- or tricarboxylic acids but also amino acids. With amino acids Cu, Zn, Au, Ni, U, Hg and Sb have been solubilized from metal oxides, metal sulfides or elementary metals. In this work it was investigated if excreted amino acids play a role in the leaching of zinc from a zinc oxide containing industrial filter dust. Two bacteria-Pseudomonas putida andCorynebacterium glutamicum-and a fungus-Penicillium simplicissimum were used.P. putida andP. Simplicissimum have already been used to solubilize zinc oxide, whereasC. glutamicum was used because of its known ability to excrete amino acids. Amino acids in culture fluids were analyzed via derivatization with phenyl isothiocyanate, separation on a RP-18 column and UV-detection. All three microorganisms solubilized zinc from the filter dust and excreted much more citric acid than amino acids. Thus citric acid rather than amino acids was regarded to be the leaching agent. Of the two bacteriaP. putida was more resistant towards the heavy metalcontaining filter dust.     

The Incorporation of Farnesol-2-14C into Ipomeamarone

The survival of genetically engineered and wild-type Pseudomonas putida PpY101, that contained a recombinant plasmid pSR134 conferring mercury resistance, were monitored in andosol and sand microcosms. The survival of genetically engineered and wild-type P. putida was not significantly different in andosol. The population change of the two strains was dissimilar in andosol and sand. The survival of genetically engineered and wild-type P. putida strains was affected by the water content of andosol, and increased with the increment of the water content. The impact of the addition of genetically engineered and wild-type P. putida strains on indigenous bacteria and fungi was examined. Inoculation of both strains had no apparent effect on the density of indigenous microorganisms.     

Enhancement ofcis,cis-muconate productivity by overexpression of catechol 1,2-dioxygenase inPseudomonas putida BCM114

For enhancement ofcis,cis-muconate productivity from benzoate, catechol 1,2-dioxygenase (C12O) which catalyzes the rate-limiting step (catechol conversion tocis,cis-muconate) was cloned and expressed in recombinantPseudomonas putida BCM114. At higher benzoate concentrations (more than 15 mM),cis,cis-muconate productivity gradually decreased and unconverted catechol was accumulated up to 10 mM in the case of wildtypeP. putida BM014, whereascis,cis-muconate productivity continuously increased and catechol was completely transformed tocis,cis-muconate forP. putida BCM114. Specific C12O activity ofP. putida BCM114 was about three times higher than that ofP. putida BM014, and productivity was enhanced more than two times.     

Debottlenecking 4-hydroxybenzoate hydroxylation in Pseudomonas putida KT2440 improves muconate productivity from p-coumarate

The transformation of 4-hydroxybenzoate (4-HBA) to protocatechuate (PCA) is catalyzed by flavoprotein oxygenases known as para-hydroxybenzoate-3-hydroxylases (PHBHs). In Pseudomonas putida KT2440 (P. putida) strains engineered to convert lignin-related aromatic compounds to muconic acid (MA), PHBH activity is rate-limiting, as indicated by the accumulation of 4-HBA, which ultimately limits MA productivity. Here, we hypothesized that replacement of PobA, the native P. putida PHBH, with PraI, a PHBH from Paenibacillus sp. JJ-1b with a broader nicotinamide cofactor preference, could alleviate this bottleneck. Biochemical assays confirmed the strict preference of NADPH for PobA, while PraI can utilize either NADH or NADPH. Kinetic assays demonstrated that both PobA and PraI can utilize NADPH with comparable catalytic efficiency and that PraI also efficiently utilizes NADH at roughly half the catalytic efficiency. The X-ray crystal structure of PraI was solved and revealed absolute conservation of the active site architecture to other PHBH structures despite their differing cofactor preferences. To understand the effect in vivo, we compared three P. putida strains engineered to produce MA from p-coumarate (pCA), showing that expression of praI leads to lower 4-HBA accumulation and decreased NADP⁺/NADPH ratios relative to strains harboring pobA, indicative of a relieved 4-HBA bottleneck due to increased NADPH availability. In bioreactor cultivations, a strain exclusively expressing praI achieved a titer of 40 g/L MA at 100% molar yield and a productivity of 0.5 g/L/h. Overall, this study demonstrates the benefit of sampling readily available natural enzyme diversity for debottlenecking metabolic flux in an engineered strain for microbial conversion of lignin-derived compounds to value-added products.     

Short communication: Isolation of a bacterium capable of limited degradation of industrial and labelled,natural and synthetic lignins

Pseudomonas putida, isolated from decomposing plant materials, degraded several lignin-related aromatic compounds. After 30 days of incubation in media containing polymeric Kraft-lignin (PKL), the amount of Klason lignin had decreased by about 13%. When ¹⁴C-labelled dehydropolymers of coniferyl alcohol (DHP) lignins and ¹⁴C-lignin-lignocelluloses were used as substrates, mineralization to ¹⁴CO₂ by the P. putida strain ranged from 1.4% to 2.1%.