Surface enhanced Raman scattering for narcotic detection and applications to chemical biology

Raman spectroscopy is rapidly finding favour for applications in the life science because of the ease with which it can be used to extract significant data from tissue and cells. However, the Raman effect is an inherently weak effect, which hinders the analysis of low concentration analytes. Raman sensitivity can be improved via the surface enhanced Raman scattering (SERS) effect. In SERS, Raman spectra are dramatically amplified when a molecule is adsorbed onto nano-roughened noble metal surfaces such as silver and gold. The degree of enhancement enables single-molecule detection, which offers the potential for the unambiguous identification of analytes at concentrations that are useful in both a forensic and a chemical biology context. Here we discuss some of the practical applications of SERS to both low-level narcotic detection, and how this can be applied to chemical biology.     

Ultra‐sensitive immunoassay biosensors using hybrid plasmonic‐biosilica nanostructured materials

We experimentally demonstrate an ultra‐sensitive immunoassay biosensor using diatom biosilica with self‐assembled plasmonic nanoparticles. As the nature‐created photonic crystal structures, diatoms have been adopted to enhance surface plasmon resonances of metal nanoparticles on the surfaces of diatom frustules and to increase the sensitivity of surface‐enhanced Raman scattering (SERS). In this study, a sandwich SERS immunoassay is developed based on the hybrid plasmonic‐biosilica nanostructured materials that are functionalized with goat anti‐mouse IgG. Our experimental results show that diatom frustules improve the detection limit of mouse IgG to 10 pg/mL, which is ?100× better than conventional colloidal SERS sensors on flat glass.

Ultra‐sensitive immunoassay biosensor using diatom biosilica with self‐assembled plasmonic nanoparticles.     

Tunable Plasmonic Silver Nanodomes for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is an emerging analytical method used in biological and non-biological structure characterization. Since the nanostructure plasmonic properties is a significant factor for SERS performance, nanostructure fabrication with tunable plasmonic properties are crucial in SERS studies. In this study, a novel method for fabrication of tunable plasmonic silver nanodomes (AgNDs) is presented. The convective-assembly method is preferred for the deposition of latex particles uniformly on a regular glass slide and used as a template for polydimethylsiloxane (PDMS) to prepare nanovoids on a PDMS surface. The obtained nanovoids on the PDMS are used as a mold for AgNDs fabrication. The nanovoids are filled with Ag deposition by the electrochemical method to obtain metallic AgNDs. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used for characterization of the structural properties of all fabricated AgNDs. The optical properties of AgNDs are characterized with the evaluation of SERS activity of 4-aminothiphonel and rhodamine 6G. In addition to experimental characterizations, the finite difference time domain (FDTD) method is used for the theoretical plasmonic properties calculation of the AgNDs. The experimental and theoretical results show that the SERS performance of AgNDs is strongly dependent on the heights and diameters of the AgNDs.     

Using Laser Duty Cycles for Modifying the Performance of Au-NPs/Si Nano Column Hot Spot SERS Sensors

In the current study, the Si nano column layer via pulsed photo chemical etching with different laser pulse duty cycle 30 and 60% using short laser wavelength (405 nm) and laser intensity (100 mW/cm²) was formed and studied. Two types of Si nano column-based plasmonic Au-NP hot spot layers were synthesized and examined successfully as an efficient SERS layer for the detection of the ultra-low concentration of amoxicillin. Si nano columns exposed a great effect on the performance of the Au-NP hot spot SERS sensor showing a strong dependence on the density of the hot spot gaps within the sensitive layer. Enhancement factor (EF) of the Raman signal improved considerably with increasing the density of the hot spot gaps due to the coupling efficiency among the plasmonic Au-NPs and the molecules of amoxicillin within the hot spot regions. EF increased by about four orders of magnitude with decreasing the laser duty cycles due to the increase of the integrated plasmonic Au-NPs into the Si nano column layer.

     

Fabrication of Sub-10-nm Plasmonic Gaps for Ultra-Sensitive Raman Spectroscopy

Plasmonics - The past two decades have witnessed the explosion of activities in the field of surface enhanced Raman spectroscopy (SERS). SERS platforms employ nano-structures that excite plasmonic...     

表面等离子体-拉曼散射双模式复合生物芯片

本文提出了复合表面等离子体(SPR)无标记检测及表面增强拉曼散射(SERS)的显微成像技术.证明了双模式SPR-SERS生物芯片的可实施性,即在同一芯片上实现了表面等离子共振和表面增强拉曼显微检测.鉴于双模芯片的高保真性,基于显微技术的高精准、多通道无标记检测技术有望在临床医学检测中得以广泛应用.     

Highly reproducible immunoassay of cancer markers on a gold-patterned microarray chip using surface-enhanced Raman scattering imaging

This paper reports a highly reproducible immunoassay of cancer markers using surface-enhanced Raman scattering (SERS) imaging. SERS is a highly sensitive detection method but it is limited in its ability to achieve reproducible signal enhancement because of the difficulty with precisely controlling the uniform distribution of hot junctions. Consequently, inconsistent enhancement prevents the wide exploitation of SERS detection as a bio-detection tool for quantitative analysis. To resolve this problem, we explored the use of a SERS imaging-based immunoassay. For this purpose, Raman reporter-labeled hollow gold nanospheres (HGNs), were manufactured and antibodies were immobilized onto their surfaces for targeting specific antigens. After the formation of sandwich immunocomplexes using these functional HGNs on the surfaces of gold patterned wells, the SERS mapping images were measured. For target protein markers, 12×9 pixels were imaged using a Raman mapping technique in the 0-10(-4) g/mL concentration range, and the SERS signals for 66 pixels were averaged. Here, the SERS imaging-based assay shows much better correlations between concentration and intensity than does the conventional point-based assay. The limits of detection were determined to be 0.1 pg/mL and 1.0 pg/mL for angiogenin (ANG) and alpha-fetoprotein (AFP), respectively. This detection sensitivity is increased by three or four orders of magnitude over that of conventional ELISA method. The detectable dynamic range for SERS imaging (10(-4)-10(-12) g/mL) is also much wider than that for ELISA (10(-6)-10(-9) g/mL).     

Design of Polarization Independent SERS Substrate with Raman Gain Evaluated Using Purcell Factor

Surface-enhanced Raman scattering (SERS) is a very promising detection/diagnostic technique at trace levels as the molecules exhibit a significant increase in their Raman signals when they are attached or are in proximity to plasmonic structures. In this study, a numerical design of SERS substrate as a probe has been demonstrated for detection and diagnosis of blood, water and urea samples. The proposed nanospiral design is polarization independent, and it offers the enhancement of the electric field strength ~ 10⁹. The substrate design is based on 3D finite difference time domain simulations and is robust, versatile and sensitive even at low concentrations of the analyte. It works equally well when used in the reflection mode. In this study, the cavity quantum electrodynamics (CQED) Purcell factor has also been transposed to plasmonics. The Purcell factor in corroboration with CQED has been used to achieve efficient light–matter interaction at nanoscale by providing a more realistic result. It takes into account the randomness of incident wave polarizations and arbitrary orientations of interacting molecules. This gives a deeper insight into electromagnetic Raman gain in SERS and can be used to design novel SERS substrates.

     

Novel and Sensitive Core-Shell Nanoparticles Based on Surface Plasmon Resonance

In this paper, a rough silver core-shell nanoparticle with strong electric field enhancement in the vicinity of a bumpy structure on the silver core-shell surface is reported. A dipolar plasmonic mode of the silver nanoshell is investigated by using the quasi-static approach and plasmon hybridization theory, which analytical results identify the electric field enhancement spectra in which the enhancement is optimized. As the silver shell thickness is small, the hot spots play an important role in the plasmonic field enhancement. In addition, the deposition of a rough silver shell can generate a stronger near-field enhancement near the silver surface which is more desirable than that of a smooth silver shell for sensitive detection based on SPR and surface enhanced Raman scattering (SERS). The plasmonic field enhancement of a bumpy silver core-shell nanoparticle permits the detection and characterization of bovine serum albumin (BSA) protein molecule and hemoglobin solution with a high sensitivity.     

Plasmonic Coupling Effect in Ag Nanocap–Nanohole Pairs for Surface-Enhanced Raman Scattering

A plasmonic coupling structure composed of Ag nanocap–nanohole pairs was fabricated through a novel and facile method. Both surface-enhanced Raman scattering (SERS) measurements and numerical simulations show that the cap-hole system produces much larger electric field enhancement and SERS signal than the isolated structures, which is due to the plasmonic coupling effect between the gap of the cap and the hole. Additionally, the plasmonic enhancement is sensitive to the gap size, which can be controlled by the Ag layer thickness during the evaporation process. A maximum enhancement factor of 1.1×10⁸ can be obtained with optimized gap size.     

Remote Excitation Polarization-Dependent Surface Photochemical Reaction by Plasmonic Waveguide

For the first time, we report remote excitation polarization-dependent surface photochemical reaction by plasmonic waveguide. Remote excitation polarization-dependent surface-enhanced Raman scattering (SERS) spectra indicate a surface photochemical reaction that p-aminothiophenol is converted to p,p′-dimercaptoazobenzene (DMAB) induced by the plasmonic waveguide. Surface plasmon polaritons generated at the end of a silver nanowire can propagate efficiently along the nanowire, and be coupled by nanoparticles near the nanowire as a nanoantenna. Massive electromagnetic enhancement is generated in the nanogap between the nanowire and the nanoparticles. The remote excitation polarization-dependent SERS spectra can be obtained experimentally in the nanogaps; furthermore, the remote excitation polarization-dependent SERS spectra of DMAB reveal the occurrence of this surface catalytic reaction. Theoretical simulations using finite-difference time-domain methods strongly support our experimental results.     

Plasmonic Interaction Between Silver Nano-Cubes and a Silver Ground Plane Studied by Surface-Enhanced Raman Scattering

The plasmonic interaction between silver nano-cubes and a silver ground plane with and without a dielectric spacer is studied for surface-enhanced Raman scattering (SERS) for rhodamine 6G (R6G) molecules absorbed onto the silver nano-cubes. Experimental results show that the composite substrates made from silver nano-cubes and the silver ground plane produce a stronger SERS signal than by the cubes alone, due to the plasmonic interaction between the cubes and the film. Numerical simulation is used to verify the plasmonic enhancement of the composite substrate and is consistent with the experimental results. The lowest concentration of R6G molecules which can be detected with the composite substrate is about 10⁻¹¹ M with our setup.     

Magnetic–Plasmonic FePt@Ag Core–Shell Nanoparticles and Their Magnetic and SERS Properties

Magnetic–plasmonic FePt@Ag core–shell nanoparticles (NPs) with different Ag shell thicknesses were successfully synthesized using a seed-mediated method. They presented not only localized surface plasmon resonance in the visible region, but also superparamagnetic behavior at room temperature. When normalized by the weight of FePt, the saturation magnetization of the FePt@Ag NPs was found to be higher than that of FePt NPs, suggesting that the Ag shell effectively passivated the FePt NP surfaces, avoiding the direct interaction between the FePt core and surface capping ligands that typically forms a magnetically dead layer in FePt NPs. Despite the high colloidal stability and the small size of the FePt@Ag NPs, the NPs were easily separated using a permanent magnet. The surface enhanced Raman scattering (SERS) activity of the FePt@Ag NPs was then examined using thiophenol as a Raman reporter molecule and was found to be equivalent to that of Ag NPs. Moreover, the SERS activity of the FePt@Ag NPs was enhanced when a magnetic field was applied during the preparation of the SERS substrate (FePt@Ag NP film). These FePt@Ag NPs hold promise as dual-functional sensing probes for environmental and diagnostic applications.     

Direct Fabrication Route to Plastic-Supported Gold Nanoparticles for Flexible NIR-SERS

Stable gold nanoparticles with surface plasmon resonance tunable from visible (Vis) to near-infrared (NIR) are deposited via a direct sputtering methodology on large area polyethylene terephthalate (PET) to be used as effective, flexible NIR surface-enhanced Raman scattering (SERS) substrates. An O₂ plasma treatment of PET is used to tailor growth dynamics, geometry, and plasmonic properties of nanoparticles. The O₂ plasma treatment of PET results also in effective improvement of nanoparticle anchoring on the plastic substrate, providing more stable, flexible SERS systems. The functionality of fabricated SERS substrates has been tested using benzylthiol, and SERS enhancement factors in the range 10⁴ have been achieved, which are comparable with those reported in literature for gold nanostructures fabricated on silicon substrate. These results attest the great potentiality of this methodology for the production of cost-effective flexible and reusable large-scale SERS substrates.     

The Role of Propagating and Localized Surface Plasmons for SERS Enhancement in Periodic Nanostructures

Periodic arrays of plasmonic nanopillars have been shown to provide large, uniform surface-enhanced Raman scattering (SERS) enhancements. We show that these enhancements are the result of the combined impact of localized and propagating surface plasmon modes within the plasmonic architecture. Here, arrays of periodically arranged silicon nanopillars of varying sizes and interpillar gaps were fabricated to enable the exploration of the SERS response from two different structures; one featuring only localized surface plasmon (LSP) modes and the other featuring LSP and propagating (PSP) modes. It is shown that the LSP modes determine the optimal architecture, and thereby determine the optimum diameter for the structures at a given incident. However, the increase in the SERS enhancement factor for a system in which LSP and PSP cooperatively interact was measured to be over an order of magnitude higher and the peak in the diameter dependence was significantly broadened, thus, such structures not only provide larger enhancement factors but are also more forgiving of lithographic variations.     

Electron Energy Loss and One- and Two-Photon Excited SERS Probing of “Hot” Plasmonic Silver Nanoaggregates

We report electron energy loss spectroscopy (EELS) and one- and two-photon excited surface-enhanced Raman scattering (SERS) and hyper Raman studies on plasmonic silver nanoaggregates. By comparison with computations, EELS imaging reveals an inverse relationship between local field intensity in an optical experiment and electron energy loss intensity at energies corresponding to excitation wavelengths used for optical probing. This inverse relation exists independent on specific nanoaggregate geometries and is mainly controlled by the gap size between the particles forming the aggregate. The ratio between two- and one-photon excited SERS measured at different excitation wavelengths provides information about local fields in the hottest spots and their dependence on the photon energy. Our data verify experimentally the predicted increase of local optical fields in the hot spots with increasing wave lengths. The reported findings show new experimental ways to characterize local fields of plasmonic nanostructures. This is of particular importance for complex structures which are not easily approachable by computations.     

Development of highly reliable SERS‐active photonic crystal fiber probe and its application in the detection of ovarian cancer biomarker in cyst fluid

Conventionally Surface‐enhanced Raman spectroscopy (SERS) is realized by adsorbing analytes onto nano‐roughened planar substrate coated with noble metals (silver or gold) or their colloidal nanoparticles (NPs). Nanoscale irregularities in such substrates/NPs could lead to SERS sensors with poor reproducibility and repeatability. Herein, we demonstrate a suspended core photonic crystal fiber (PCF) based SERS sensor with extremely high reproducibility and repeatability in measurement with a relative SD of only 1.5% and 4.6%, respectively, which makes it more reliable than any existing SERS sensor platforms. In addition, our platform could improve the detection sensitivity owing to the increased interaction area between the guided light and the analyte, which is incorporated into the holes that runs along the length of the PCF. Numerical calculation established the significance of the interplay between light coupling efficiency and evanescent field distribution, which could eventually determine the sensitivity and reliability of the developed SERS active‐PCF sensor. As a proof of concept, using this sensor, we demonstrated the detection of haptoglobin, a biomarker for ovarian cancer, contained within the ovarian cyst fluid, which facilitated in differentiating the stages of cancer. We envision that with necessary refinements, this platform could potentially be translated as a next‐generation highly sensitive SERS‐active opto‐fluidic biopsy needle for the detection of biomarkers in body fluids.     

A Real-Time Clinical Endoscopic System for Intraluminal,Multiplexed Imaging of Surface-Enhanced Raman Scattering Nanoparticles

The detection of biomarker-targeting surface-enhanced Raman scattering (SERS) nanoparticles (NPs) in the human gastrointestinal tract has the potential to improve early cancer detection; however, a clinically relevant device with rapid Raman-imaging capability has not been described. Here we report the design and in vivo demonstration of a miniature, non-contact, opto-electro-mechanical Raman device as an accessory to clinical endoscopes that can provide multiplexed molecular data via a panel of SERS NPs. This device enables rapid circumferential scanning of topologically complex luminal surfaces of hollow organs (e.g., colon and esophagus) and produces quantitative images of the relative concentrations of SERS NPs that are present. Human and swine studies have demonstrated the speed and simplicity of this technique. This approach also offers unparalleled multiplexing capabilities by simultaneously detecting the unique spectral fingerprints of multiple SERS NPs. Therefore, this new screening strategy has the potential to improve diagnosis and to guide therapy by enabling sensitive quantitative molecular detection of small and otherwise hard-to-detect lesions in the context of white-light endoscopy.     

Remote-Excitation Time-Dependent Surface Catalysis Reaction Using Plasmonic Waveguide on Sites of Single-Crystalline Crossed Nanowires

The remote-excitation polarization-dependent surface enhanced Raman scattering (SERS) induced by plasmonic waveguide is used to investigate the surface catalysis reaction of 4-nitrobenzenethiol converting to p,p′-dimercaptoazobenzene. The propagating surface plasmon polaritons along single-crystalline nanowires can be coupled by the crossed nanowire as nanoantenna for generating massive electromagnetic field enhancement in the nanogap. The remote-excitation SERS spectra in the nanogap reveal the occurrence of a surface catalysis reaction. The time-dependent remote-excitation SERS spectra further confirmed such surface catalysis reaction. This novel sensitive technology could lead to miniaturized photonics and realize high-resolution microscopy/spectroscopy used in the field of remote catalysis reaction.     

Size Dependence of Nanoparticle-SERS Enhancement from Silver Film over Nanosphere (AgFON) Substrate

The dependence of nanoparticle size on surface-enhanced Raman scattering (SERS) from silver film over nanospheres substrate is studied. For a range of nanosphere sizes from 430 to 1,500 nm, optimum SERS signal is obtained with a nanosphere size of 1,000 nm at an excitation wavelength of 532 nm. We have clarified the physical origin of this optimization in an unambiguious way as due to resonant plasmonic excitations from 3D finite-difference time-domain simulations, as well as with the assistance of UV-visible reflectance spectrum.