Enzyme-linked coagulation assay. III. Sensitive immunoassays for clotting factors II, VII, and X

The solid-phase clotting assay utilizing fibrinogen coated on the wells of a microtiter plate and peroxidase-fibrinogen in solution as a substrate for thrombin (enzyme-linked coagulation assay, ELCA) has been modified for use as an immunoassay. Direct inhibition of factors II, VII, and X by polyclonal (rabbit) antibodies and of factor X by monoclonal antibodies has been demonstrated at high dilution of these antibodies and detection of the specific factors using ELCA. Using plates coated with a second antibody (goat anti-mouse IgG) as well as fibrinogen, monoclonal antibodies to factors X and VII were measured by binding the active factor to the plate and detection of the bound factor using ELCA. The assay was very sensitive, permitting the detection of as little as 0.2 ng/ml (30 pg/assay) of monoclonal antibody, or less than 0.4 ng/ml (60 pg/assay) of factor Xa. When plates were coated with monoclonal antibody to factor X and fibrinogen, the assay permitted the identification of distinct epitope specificities for two monoclonal antibodies to factor X by distinct competition of the monoclonal antibodies added in the solution phase for binding of factor Xa to the plate. This assay could be applied generally for immunoassay of clotting factors, and could have application in general as an immunoassay amplification system.     

Liposome polymerase chain reaction assay for the sub-attomolar detection of cholera toxin and botulinum neurotoxin type A

We describe an ultrasensitive immunoassay for detecting biotoxins that uses a liposome with encapsulated DNA reporters, and ganglioside receptors embedded in the bilayer, as the detection reagent. After immobilization of the target biotoxin by a capture antibody and co-binding of the detection reagent, the liposomes are ruptured to release the reporters, which are quantified by real-time polymerase chain reaction. The new assays for cholera and botulinum toxins are several orders of magnitude more sensitive than current detection methods. A single 96-well microtiter plate can analyze approximately 20 specimens, including calibration standards and controls, with all measurements conducted in triplicate. Using pre-coated and blocked microtiter plates, and pre-prepared liposome reagents, a liposome polymerase chain reaction assay can be carried out in about 6 h.     

Rapid detection of salmonellae by immunoassays with titanous hydroxide as the solid phase

Radioimmunometric and enzyme-immunometric assays were developed for the detection of salmonellae in pure and mixed cultures as well as in 59 food samples. The performances of titanous hydroxide suspension and microtiter plates as the solid phase for the immobilization of microorganisms were compared in these immunoassays. Detection of populations of salmonella cells in pure culture, diluted with saline, was 4- to 10-fold more sensitive with the microtiter plates. However, with mixed culture of salmonella and other enterobacterial species, the detection sensitivity with titanous hydroxide was 100- to 160-fold more sensitive than with microtiter plates. Good correlation existed between results of a standard cultural method for the detection of salmonellae in foods and those obtained from radioimmunometric and enzyme-immunometric assays utilizing titanous hydroxide. However, a high incidence of false-positive and false-negative results with food samples occurred with the enzyme-immunometric assay utilizing microtiter plates. The results provided strong evidence for the merits of substituting titanous hydroxide for microtiter plates as the solid phase for the immobilization of salmonellae for their detection by immunoassays. The immunoassays were rapid and enabled the analysis of a large number of selective enrichment cultures of food samples for salmonellae within 8 h.     

Rapid detection of salmonellae by immunoassays with titanous hydroxide as the solid phase.

Radioimmunometric and enzyme-immunometric assays were developed for the detection of salmonellae in pure and mixed cultures as well as in 59 food samples. The performances of titanous hydroxide suspension and microtiter plates as the solid phase for the immobilization of microorganisms were compared in these immunoassays. Detection of populations of salmonella cells in pure culture, diluted with saline, was 4- to 10-fold more sensitive with the microtiter plates. However, with mixed culture of salmonella and other enterobacterial species, the detection sensitivity with titanous hydroxide was 100- to 160-fold more sensitive than with microtiter plates. Good correlation existed between results of a standard cultural method for the detection of salmonellae in foods and those obtained from radioimmunometric and enzyme-immunometric assays utilizing titanous hydroxide. However, a high incidence of false-positive and false-negative results with food samples occurred with the enzyme-immunometric assay utilizing microtiter plates. The results provided strong evidence for the merits of substituting titanous hydroxide for microtiter plates as the solid phase for the immobilization of salmonellae for their detection by immunoassays. The immunoassays were rapid and enabled the analysis of a large number of selective enrichment cultures of food samples for salmonellae within 8 h.     

A novel microtiter plate based method for identification of B‐cell epitopes

A new type of microtiter plate capable of binding biomolecules covalently in a one step procedure was used to map linear B‐cell epitopes in two different proteins using a peptide‐based solid phase immunoassay. The method was compared with a conventional immobilization method using passive adsorption to microtiter plates. An array of 15‐mer peptides, overlapping by five amino acids, representing the entire sequences of ubiquitin and murine tumor necrosis factor‐α, respectively, was synthesized. The peptides were immobilized covalently using the new, specialized microtiter plates or non‐covalently using conventional ELISA microtiter plates of the high binder type. Subsequently, specific antisera to ubiquitin or murine tumor necrosis factor‐α were added to identify potential linear B‐cell epitopes. All peptides, which were recognized on the conventional microtiter plates, were also recognized on the plates with the covalently bound peptides. In addition, the covalent immobilization method revealed epitopes that were not identified using the method for non‐covalent binding although the peptides were in fact present on the non‐covalent binding surface. The interaction with the hydrophobic surface of the conventional microtiter plate apparently interfered negatively with antibody recognition. The covalently binding microtiter plates described here could be useful for identification of new B‐cell epitopes in protein antigens. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

In situ deprotection: a method for covalent immobilization of peptides with well-defined orientation for use in solid phase immunoassays such as enzyme-linked immunosorbent assay.

The orientation of an immobilized antigen is important for recognition by, e.g., an antibody. When noncovalent passive adsorption is used for immobilization, the number of ways that the antigen can attach to the surface is numerous and control of how the antigen orientates on the surface is limited. Covalent immobilization restricts the number of the ways that the antigen can be immobilized to the number of reactive groups on the antigen and, hence, the orientation of the immobilized antigen is more predictable. Peptide antigens were synthesized and purified with protection groups on the lysine and cysteine side chains. These peptides, which have only one good nucleophilic group (the N-terminal alpha-amino group), were immobilized covalently in microtiter plates supplied with tresyl groups on the surface and the protection groups were cleaved off in situ after immobilization. The controlled orientation of these peptides resulted in enhanced recognition by antibodies in general. An enzyme-linked immunosorbent assay for detection of antibodies against a peptide derived from outer surface protein C from Borrelia burgdorferi, found in Lyme borreliosis patients, was established using this strategy. Lyme borreliosis suspect patient sera showed up to a 10-fold increase in the signal when the orientation of the peptide antigen was controlled by the in situ deprotection strategy.     

Development of nonradioactive microtiter plate assays for nuclease activity

We have developed two microtiter plate assays for the detection of DNA cleavage by nucleases, using 3'-biotinylated oligonucleotide substrates. In the covalently linked oligonucleotide nuclease assay (CLONA), the biotinylated substrates are phosphorylated at the 5' end to facilitate their covalent immobilization on CovaLink NH plates. The cleavage of the covalently immobilized substrate by nucleases results in biotin release. The uncleaved substrate molecules are detected with an enzyme-avidin conjugate. The affinity-linked oligonucleotide nuclease assay (ALONA) makes use of substrates with a digoxigenin on the 5' end of the 3'-biotinylated DNA strand. The substrate binds specifically to the wells of streptavidin-coated microtiter plates, in which the nuclease reaction takes place. Uncleaved substrate retains the digoxigenin label, which is detected with an enzyme-labeled anti-digoxigenin antibody. We assessed the efficiency of these two assays by measuring S1 nuclease and DNase I activities, and the inhibitory effect of EDTA and aurintricarboxylic acid on the reaction. Both methods are more convenient than the standard radioactive nuclease assay and are suitable for high-throughput screening of potential nuclease inhibitors, nucleases, and catalytic antibodies. The ALONA assay was found to be more sensitive than the CLONA assay, with a performance similar to that of the standard nuclease assay.     

Graphene-based immunoassay for human lipocalin-2

We have developed a highly sensitive immunoassay using graphene nano platelets (GNPs) for the rapid detection of human lipocalin-2 (LCN2) in plasma, serum, and whole blood. It has the dynamic range, linear range, limit of detection, and analytical sensitivity of 0.6 to 5120, 80 to 2560, 0.7, and 1 pg/ml, respectively. It is the most sensitive assay for the detection of LCN2, which has 80-fold higher analytical sensitivity and 3-fold lesser immunoassay duration than the commercially available sandwich enzyme-linked immunosorbent assay (ELISA) kit. The functionalization of microtiter plate (MTP) with GNPs, dispersed in 3-aminopropyltriethoxysilane (APTES), provided the increased surface area that leads to higher immobilization density of capture antibodies. Moreover, the generation of free amino groups on MTP and GNPs by APTES enables the leach-proof covalent crosslinking of anti-human LCN2 capture antibody by its carboxyl groups using 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride (EDC) as the heterobifunctional crosslinker. The anti-LCN2 antibody-bound MTPs were highly stable given that they did not show any significant decrease in their functional activity when stored at 4 °C in 0.1 M phosphate-buffered saline (PBS) for 8 weeks. The developed immunoassay correlated well with the conventional ELISA, thereby demonstrating its high precision and potential utility for highly sensitive analyte detection in industrial and clinical settings.     

Detection of mercuric ions in water by ELISA with a mercury-specific antibody

An immunoassay that detects mercuric ions in water at concentrations of 0.5 ppb and above is described. The assay utilizes a monoclonal antibody that binds specifically to mercuric ions immobilized in wells of microtiter plates. Within the range of 0.5-10 ppb mercury, the absorbance in the enzyme-linked immunosorbent assay (ELISA) is linear to the log of the mercuric ion concentration. The quantitation of mercury by ELISA correlates closely with results from cold-vapor atomic absorption. Other divalent metal cations do not interfere with the assay, although there is interference in the presence of 1 mM chloride ions. The optimum pH for mercury detection is 7.0, although 2 ppb mercury can be detected over a wide pH range. The assay is as sensitive as cold-vapor atomic absorption for mercury detection and can be performed with only 100 microliters of sample.     

Protein A-based antibody immobilization onto polymeric microdevices for enhanced sensitivity of enzyme-linked immunosorbent assay

Highly efficient antibody immobilization is extremely crucial for the development of high-performance polymeric microdevices for enzyme-linked immunosorbent assay (ELISA). In this article, a site-selective tyrosinase (TR)-catalyzed protein A strategy for antibody immobilization was developed to enhance the sensitivity of ELISA in poly-(methyl methacrylate) (PMMA) microchannels for interferon-gamma (IFN-gamma) assay. To effectively immobilize the target antibodies, oxygen plasma was first used to activate the inert PMMA. This is followed by poly(ethyleneimine) (PEI) coating, an amine-containing functional polymer. For comparison, protein A was also immobilized through the commonly used amine-glutaraldehyde (GA) chemistry. Oxygen plasma treatment effectively increased the amount of PEI attachment and subsequent binding efficiency of the primary antibody. The antibody immobilized via TR-catalyzed protein A was able to provide much better specific antigen capture efficiency than GA chemistry due to the optimal spacing and orientation. Consequently, by using this new method, the detection signal and the signal-to-noise ratio of the ELISA immunoassay in microdevices were all significantly improved. In comparison to the standard assay carried out in the 96-well microtiter plate, the treated microchannels exhibited a broader detection range and a shorter detection time. And the detection limit was also decreased to 20 pg/mL, much lower than that obtained in other microdevices.     

Highly sensitive second-antibody enzyme immunoassay for determination of estradiol-17beta concentration in blood plasma of the mithun (Bos frontalis)

The objective of the present study was to develop and validate a simple, sensitive, quick and economic enzyme immunoassay (EIA) for estradiol-17beta (E2) in mithun (Bos frontalis) plasma on microtiter plates using a second-antibody coating technique and hormone-horseradish peroxidase as a label. For the assay, the wells of microtiter plates were coated with affinity-purified goat anti-rabbit IgG that binds the hormone-specific antibody. One milliliter of mithun plasma was extracted using benzene and 50 microl of 300 microl volume reconstituted with assay buffer was run in the assay along with standards ranging from 0.10-100 pg/well prepared in assay buffer. The sensitivity of the assay was 0.72 pg/ml. The intra- and inter-assay coefficients of variation were below 10%, and the extraction efficiency was >93%. Linearity of recovery of the added hormone concentrations was recorded. The assay developed was further validated biologically by estimating the hormone concentrations in six female and five male mithun calves, 12 cyclic mithuns for the entire reproductive cycle, and four pregnant mithun cows. The EIA developed can estimate low concentrations of E2 (2.2-5.2 pg/ml) in growing calves as well as very high concentrations of the hormone during pregnancy (E2=85.6-143.5 pg/ml). Apart from being non-radioactive, the assay developed has several advantages over conventional radioimmunoassays: it is more sensitive, less labor intensive, simpler to perform, and less time consuming. In conclusion, the EIA procedure described herein is sufficiently reliable, economic, safe, quick and sensitive to estimate the hormone at all physiological levels in bovine plasma.     

A sensitive microplate assay for the detection of proteolytic enzymes using radiolabeled gelatin

A sensitive, microplate assay is described for the detection of a wide range of proteolytic enzymes, using radio-iodine-labeled gelatin as substrate. The technique uses the Bolton-Hunter reagent to label the substrate, which is then coated onto the wells of polyvinyl chloride microtiter plates. By measuring the radioactivity released the assay is able to detect elastase, trypsin, and collagenase in concentrations of 1 ng/ml or less, while the microtiter format permits multiple sample handling and minimizes sample volumes required for analysis.     

Solid-Phase Immunoassays for Quantitation of Antibody to Bovine White Matter Proteolipid Apoprotein

Abstract: Two solid-phase immunoassays have been developed for quantitation of antibodies to bovine white matter proteolipid apoprotein. Conditions were established for optimal specific antibody binding. Water-soluble proteolipid apoprotein was bound to microtiter plates and plates were incubated with test serum. Goat anti-rabbit IgG conjugated with horeseradish peroxidase was used as the second antibody for an enzyme-linked immunospecific assay and ¹²⁵I-labeled protein A for a radioimmunoassay. Both procedures have been used to follow the time course of anti-proteolipid antibody production in rabbits and to compare different immunization protocols.     

Glucagon amyloid-like fibril morphology is selected via morphology-dependent growth inhibition

The 29-residue peptide hormone glucagon readily fibrillates at low pH, but the structure and morphology of the fibrils are very sensitive to the environmental conditions. Here we have investigated the mechanism behind the differences in morphology observed when glucagon fibrils are formed at different peptide concentrations. Electron microscopy shows that fibrils formed at low glucagon concentration (0.25 mg/mL) are twisted, while fibrils formed at high concentration (8 mg/mL) are straight. Monitoring the fibrillation kinetics at different concentrations, we find that the lag time has an unexpected maximum at a concentration of 1 mg/mL, with faster fibrillation at both lower and higher concentrations. Seeding experiments show that small amounts of straight fibril seeds can accelerate fibril growth at both low and high glucagon concentration, while twisted fibril seeds cannot grow at high concentrations. We conclude that there exists a morphology-dependent mechanism for inhibition of glucagon fibril growth. Light scattering experiments indicate that glucagon is mainly monomeric below 1 mg/mL and increasingly trimeric above this concentration. We propose that the glucagon trimer is able to specifically inhibit growth of the twisted fibril morphology. Such inhibitory binding of molecules in an unproductive conformation could also play a role in the selection of morphologies for other fibril-forming peptides and proteins.     

Production of monoclonal antibodies to estriol and their application in the development of a sensitive nonisotopic immunoassay

The development of highly specific monoclonal antibodies to estriol and a nonisotopic immunoassay (EIA) for unconjugated estriol based on the use of these monoclonal antibodies have been described. The monoclonal antibodies show little cross reactivity with other steroids and steroid conjugates and can be used directly in immunoassays without any purification. The EIA described here can be performed in 96-well microtiter plates or polystyrene tubes that have been coated with estriol-bovine serum albumin conjugate. In this assay, estriol in the standard or clinical samples (serum or saliva) competes with the immobilized steroid on the plate or the tube for binding with the antibody. The assay shows good agreement with radioimmunoassay (RIA) and is highly sensitive and reliable. Since no prior processing or extraction of the clinical samples is necessary, the method is potentially applicable for routine use in fetal monitoring as well as in a steroid laboratory.     

An enzyme immunoassay for the quantitation of dihydropteridine reductase

A competitive, enzyme-linked immunosorbent assay for the quantitative determination of dihydropteridine reductase (DHPR) is described. This highly sensitive method can determine the content of DHPR protein in tissue preparations independently of the enzymatic activity of the protein molecule. The method involves initial incubation of samples containing soluble enzyme in microtiter plates coated with purified goat antibodies to rat DHPR and further incubation with DHPR conjugated to alkaline phosphatase. The assay is used to study the ontogeny of DHPR in rat liver.     

Automated nonisotopic assay for protein-tyrosine kinase and protein-tyrosine phosphatase activities.

A sensitive, automated, and nonisotopic assay for protein-tyrosine kinases and phosphatases has been developed. The assay uses commercially available antiphosphotyrosine monoclonal antibodies and the recently developed particle concentration immunofluorescence immunoassay technology. The assay is specific for phosphotyrosine residues, can be performed faster, and is at least 100-fold more sensitive than the current standard filter type radioassay. Myelin basic protein and a synthetic peptide corresponding to the autophosphorylation site of p56lck performed equally well in the detection of p56lck kinase activity. Myelin basic protein phosphorylated on tyrosine residues by p56lck was successfully used as substrate in the detection of phosphatase activity and vanadate or molybdate were shown to inhibit the phosphatase activity. The assay is particularly useful for the rapid detection of enzyme activities in column fractions from biochemical procedures steps and also for screening of large numbers of potential inhibitors or activators of protein-tyrosine kinases and phosphatases.     

An in vitro screening assay based on synthetic prion protein peptides for identification of fibril-interfering compounds

Transmissible spongiform encephalopathies are neurodegenerative diseases and are considered to be caused by malformed prion proteins accumulated into fibrillar structures that can then aggregate to form larger deposits or amyloid plaques. The identification of fibril-interfering compounds is of therapeutic and prophylactic interest. A robust and easy-to-perform, high-throughput, in vitro fluorescence assay was developed for the detection of such compounds. The assay was based on staining with the fluorescent probe thioflavin S in polystyrene microtiter plates to determine the amyloid state of synthetic peptides, representing a putative transmembrane domain of human and mouse prion protein. In determining optimal test conditions, it was found that drying peptides from phosphate buffer prior to staining resulted in good reproducibility with an interassay variation coefficient of 8%. Effects of thioflavin S concentration and staining time were established. At optimal thioflavin S concentration of 0.2mg/ml, the fluorescence signals of thioflavin S with five different prion protein-based fibrillogenic peptides, as well as peptide Abeta((1-42)), were found to show a peptide-dependent linear correlation within a peptide concentration range of 10-400 microM. The ability of the assay to identify compounds that interfere with fibril formation and/or dissociate preformed fibrils was demonstrated for tetracyclic compounds by preceding coincubation with human prion protein peptide huPrP106-126.     

Activity of Zn and Mg phthalocyanines and porphyrazines in amyloid aggregation of insulin

Formation of the deposits of protein aggregates—amyloid fibrils in an intracellular and intercellular space—is common to a large group of amyloid‐associated disorders. Among the approaches to develop of therapy of such disorders is the use of agents preventing protein fibrillization. Polyaromatic complexes—porphyrins and phthalocyanines—are known as compounds possessing anti‐fibrillogenic activity. Here, we explore the impact of related macrocyclic complexes—phthalocyanines (Pc) and octaphenyl porphyrazines (Pz) of Mg and Zn—on aggregation of amyloidogenic protein insulin. Pz complexes are firstly reported as compounds able to affect protein fibrillization. The effect of Pc and Pz complexes on the kinetics and intensity of insulin aggregation was studied by the fluorescent assay using amyloid sensitive cyanine dye. This has shown the impact of metal ion on the anti‐fibrillogenic properties of macrocyclic complexes—the effect on the fibrillization kinetics of Mg‐containing compounds is much more pronounced comparing to that of Zn analogues. Scanning electron microscopy experiments have demonstrated that filamentous fibrils are the main product of aggregation both for free insulin and in the presence of macrocyclic complexes. However, those fibrils are distinct by their length and proneness to lateral aggregation. The Pc complexes cause the increase in variation of fibrils length 0.9 to 2.7 nm in opposite to 1.4 to 2.0 nm for free insulin, whereas Pz complexes cause certain shortening of the fibrils to 0.8 to 1.6 nm. The averaged size of the fibrils population was estimated by dynamic light scattering; it correlates with the size of single fibrils detected by scanning electron microscopy.