中试规模纯化海洋芽孢杆菌源脂肽类化合物

本次研究旨在建立经济可行的海洋芽孢杆菌源脂肽类化合物的中试规模纯化工艺。对包括酸化沉淀、甲醇浸提、溶剂沉淀、盐析、萃取、硅胶柱层析和HZ806大孔树脂吸附工艺在内的可放大的成熟单元工艺进行反复试验,考察脂肽类化合物表面活性对单元工艺的影响。严格遵循以高收率为前提循序渐进逐步减少杂质的原则,组合上述单元工艺对目标产物进行提取和纯化,并最终获得高纯度脂肽样品。新工艺可从1 t海洋芽孢杆菌Bacillus marinus B-9987的发酵液中,以百克量级的规模制备87.51%–100%纯度的脂肽类化合物样品,收率81.73%。本研究首次实现了高纯度的海洋芽孢杆菌源脂肽类化合物的百克量级制备;允许发酵生产阶段使用天然培养基,缓解了脂肽中游发酵生产和下游大规模纯化之间的矛盾;且各单元工艺规避了脂肽类化合物水溶液的乳化起泡和不经济的大体积水溶液蒸发浓缩。新工艺实用可行,经济合理。     

Integrated flow-through purification for therapeutic monoclonal antibodies processing

An integrated all flow-through technology platform for the purification of therapeutic monoclonal antibodies (mAb), consisting of activated carbon and flow-through cation and anion exchange chromatography steps, can replace a conventional chromatography platform. This new platform was observed to have excellent impurity clearance at high mAb loadings with overall mAb yield exceeding 80%. Robust removal of DNA and host cell protein was demonstrated by activated carbon and a new flow-through cation exchange resin exhibited excellent clearance of mAb aggregate with high monomer recoveries. A ten-fold improvement of mAb loading was achieved compared to a traditional cation exchange resin designed for bind and elute mode. High throughput 96-well plate screening was used for process optimization, focusing on mAb loading and solution conditions. Optimum operating windows for integrated flow-through purification are proposed based on performance characteristics. The combination of an all flow-through polishing process presents significant opportunities for improvements in facility utilization and process economics.     

Selective antibody precipitation using polyelectrolytes: A novel approach to the purification of monoclonal antibodies

We evaluated the potential for polyelectrolyte induced precipitation of antibodies to replace traditional chromatography purification. We investigated the impact of solution pH, solution ionic strength and polyelectrolyte molecular weight on the degree of precipitation using the anionic polyelectrolytes polyvinylsulfonic acid (PVS), polyacrylic acid (PAA), and polystyrenesulfonic acid (PSS). As we approached the pI of the antibody, charge neutralization of the antibody reduced the antibody–polyelectrolyte interaction, reducing antibody precipitation. At a given pH, increasing solution ionic strength prevented the ionic interaction between the polyelectrolyte and the antibody, reducing antibody precipitation. With increasing pH of precipitation, there was an increase in impurity clearance. Increasing polyelectrolyte molecular weight allowed the precipitation to be performed under conditions of higher ionic strength. PVS was selected as the preferred polyelectrolyte based on step yield following resolubilization, purification performance, as well as the nature of the precipitate. We evaluated PVS precipitation as a replacement for the initial capture step, as well as an intermediate polishing step in the purification of a humanized monoclonal antibody. PVS precipitation separated the antibody from host cell impurities such as host cell proteins (HCP) and DNA, process impurities such as leached protein A, insulin and gentamicin, as well as antibody fragments and aggregates. PVS was subsequently removed from antibody pools to <1 µg/mg using anion exchange chromatography. PVS precipitation did not impact the biological activity of the resolubilized antibody. Biotechnol. Bioeng. 2009;102: 1141–1151. © 2008 Wiley Periodicals, Inc.     

Virus elimination during the purification of monoclonal antibodies by column chromatography and additional steps

The theoretical potential for virus transmission by monoclonal antibody based therapeutic products has led to the inclusion of appropriate virus reduction steps. In this study, virus elimination by the chromatographic steps used during the purification process for two (IgG‐1 & ?3) monoclonal antibodies (MAbs) have been investigated. Both the Protein G (>7log) and ion‐exchange (5 log) chromatography steps were very effective for eliminating both enveloped and non‐enveloped viruses over the life‐time of the chromatographic gel. However, the contribution made by the final gel filtration step was more limited, i.e., 3 log. Because these chromatographic columns were recycled between uses, the effectiveness of the column sanitization procedures (guanidinium chloride for protein G or NaOH for ion‐exchange) were tested. By evaluating standard column runs immediately after each virus spiked run, it was possible to directly confirm that there was no cross contamination with virus between column runs (guanidinium chloride or NaOH). To further ensure the virus safety of the product, two specific virus elimination steps have also been included in the process. A solvent/detergent step based on 1% triton X‐100 rapidly inactivating a range of enveloped viruses by >6 log inactivation within 1 min of a 60 min treatment time. Virus removal by virus filtration step was also confirmed to be effective for those viruses of about 50 nm or greater. In conclusion, the combination of these multiple steps ensures a high margin of virus safety for this purification process. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1341–1347, 2014     

Development of an integrated automation system with a magnetic bead-mediated nucleic acid purification device for genetic analysis and gene manipulation

We have developed an integrated automation system for genetic analysis and gene manipulation. The system, SX-8G Plus, is equipped with an 8-nozzle dispensing unit, a thermal cycler, a cooled reagent reservoir, four tip storage racks, four microplate platforms, buffer reservoirs, an agarose gel electrophoresis unit, a power supply, a pump for exchanging electrophoresis buffer, and a CCD camera. Automation of nucleic acid extraction and purification, the most difficult step in automating genetic analysis and gene manipulation, was realized using magnetic beads with Magtration Technology, which we have previously developed for automating the handling of paramagnetic beads. Using this system, we could perform the automated separation and purification of DNA fragments by agarose gel electrophoresis starting from sample loading. The system would enable the automation of almost all procedures in genetic analysis and gene manipulation.     

Maximizing productivity of chromatography steps for purification of monoclonal antibodies

The large scale production of monoclonal antibodies presents a challenge to design efficient and cost effective downstream purification processes. We explored a two stage resin screening approach to identify the best candidates to be utilized for the platform purification of monoclonal antibodies. The study focused on commercially available affinity resins including Protein A, mimetic and mixed-mode interaction resins as well as ion exchangers used in polishing steps. An initial screening using pure proteins was followed by a final screening where selected resins were utilized for the purification of MAbs in complex mixtures. Initial screenings aimed to measure the theoretical upper limit for dynamic binding capacity (DBC) at 1% breakthrough and productivity. We confirmed that DBC of affinity, mimetic and mixed-mode resins was a strong function of the linear velocity used for loading. Productivities >27 g/(L-h), were obtained for rProtein A FF, Mabselect and Prosep rA Ultra at 2 min residence time. For the cation exchangers, we identified UNOsphere S and Fractogel SO(3) as the best candidates for our purification based on DBC. For anion exchangers operated in flowthrough mode, Q Sepharose XL and UNOsphere Q were selected from the initial screening based on DBC and resolution of IgG from BSA. Finally, a three step purification scheme was implemented using the selected affinity and ion exchangers for the purification of IgG from complex feedstocks. We found that Mabselect followed by UNOsphere Q and UNOsphere S provided the best purification scheme for our applications based on productivity.     

Defining process design space for monoclonal antibody cell culture

The concept of design space has been taking root as a foundation of in‐process control strategies for biopharmaceutical manufacturing processes. During mapping of the process design space, the multidimensional combination of operational variables is studied to quantify the impact on process performance in terms of productivity and product quality. An efficient methodology to map the design space for a monoclonal antibody cell culture process is described. A failure modes and effects analysis (FMEA) was used as the basis for the process characterization exercise. This was followed by an integrated study of the inoculum stage of the process which includes progressive shake flask and seed bioreactor steps. The operating conditions for the seed bioreactor were studied in an integrated fashion with the production bioreactor using a two stage design of experiments (DOE) methodology to enable optimization of operating conditions. A two level Resolution IV design was followed by a central composite design (CCD). These experiments enabled identification of the edge of failure and classification of the operational parameters as non‐key, key or critical. In addition, the models generated from the data provide further insight into balancing productivity of the cell culture process with product quality considerations. Finally, process and product‐related impurity clearance was evaluated by studies linking the upstream process with downstream purification. Production bioreactor parameters that directly influence antibody charge variants and glycosylation in CHO systems were identified. Biotechnol. Bioeng. 2010;106: 894–905. © 2010 Wiley Periodicals, Inc.     

Trace metal optimization in CHO cell culture through statistical design of experiments

A majority of the biotherapeutics industry today relies on the manufacturing of monoclonal antibodies from Chinese hamster ovary (CHO) cells, yet challenges remain with maintaining consistent product quality from high-producing cell lines. Previous studies report the impact of individual trace metal supplemental on CHO cells, and thus, the combinatorial effects of these metals could be leveraged to improve bioprocesses further. A three-level factorial experimental design was performed in fed-batch shake flasks to evaluate the impact of time wise addition of individual or combined trace metals (zinc and copper) on CHO cell culture performance. Correlations among each factor (experimental parameters) and response variables (changes in cell culture performance) were examined based on their significance and goodness of fit to a partial least square's regression model. The model indicated that zinc concentration and time of addition counter-influence peak viable cell density and antibody production. Meanwhile, early copper supplementation influenced late-stage ROS activity in a dose-dependent manner likely by alleviating cellular oxidative stress. Regression coefficients indicated that combined metal addition had less significant impact on titer and specific productivity compared to zinc addition alone, although titer increased the most under combined metal addition. Glycan analysis showed that combined metal addition reduced galactosylation to a greater extent than single metals when supplemented during the early growth phase. A validation experiment was performed to confirm the validity of the regression model by testing an optimized setpoint of metal supplement time and concentration to improve protein productivity.     

Using partition designs to enhance purification process understanding

Characterization of purification processes by identifying significant input parameters and establishing predictive models is vital to developing robust processes. Current experimental design approaches restrict analysis to one process step at a time, which can severely limit the ability to identify interactions between process steps. This can be overcome by the use of partition designs which can model multiple, sequential process steps simultaneously. This paper presents the application of partition designs to a monoclonal antibody purification process. Three sequential purification steps were modeled using both traditional experimental designs and partition designs and the results compared as a proof of concept study. The partition and traditional design approaches identified the same input parameters within each process step that significantly affected the product quality output examined. The partition design also identified significant interactions between input parameters across process steps that could not be uncovered by the traditional approach. Biotechnol. Bioeng. 2010;107: 814–824. © 2010 Wiley Periodicals, Inc.     

Monoclonal antibodies specific for cell culture mycoplasmas

Summary Mycoplasma infection of cell cultures is still a major problem in some laboratories. Although several methods can be used for their detection, identification is normally by serological procedures. As no commercial source for the necessary antibodies is available we have prepared monoclonal antibodies to the five mycoplasma species that account for the majority of cell culture infections. These antibodies have been characterized by the growth inhibition test (GIT), immunofluorescence, and enzyme linked immunosorbent assay (ELISA) and have shown perfect correlation in all tests when compared to conventional antisera raised in rabbits or donkeys. In addition, a monoclonal antibody toMycoplasma pneumoniae was produced.M. pneumoniae is an infrequent cell culture contaminant but is a human pathogen, and the monoclonal antibody described here could be useful in the clinical diagnosis ofM. pneumoniae infection in man. These studies were supported by Grants Al-15748 from the National Institute of Allergy and Infectious Diseases, and GM20138-07 from the National Institutes of Health, Bethesda, MD.     

Improving culture performance and antibody production in CHO cell culture processes by reducing the Warburg effect

Lactate is one of the key waste metabolites of mammalian cell culture. High lactate levels are caused by high aerobic glycolysis, also known as the Warburg effect, and are usually associated with adverse culture performance. Therefore, reducing lactate accumulation has been an ongoing challenge in the cell culture development to improve growth, productivity, and process robustness. The pyruvate dehydrogenase complex (PDC) plays a crucial role for the fate of pyruvate, as it converts pyruvate to acetyl coenzyme A (acetyl‐CoA). The PDC activity can be indirectly increased by inhibiting the PDC inhibitor, pyruvate dehydrogenase kinase, using dichloroacetate (DCA), resulting in less pyruvate being available for lactate formation. Here, Chinese hamster ovary cells were cultivated either with 5 mM DCA or without DCA in various batch and fed‐batch bioreactor processes. In all cultures, DCA increased peak viable cell density (VCD), culture length and final antibody titer. The strongest effect was observed in a fed batch with media and glucose feeding in which peak VCD was increased by more than 50%, culture length was extended by more than 3 days, and the final antibody titer increased by more than twofold. In cultures with DCA, lactate production and glucose consumption during exponential growth were on average reduced by approximately 40% and 35%, respectively. Metabolic flux analysis showed reduced glycolytic fluxes, whereas fluxes in the tricarboxylic acid (TCA) cycle were not affected, suggesting that cultures with DCA use glucose more efficiently. In a proteomics analysis, only few proteins were identified as being differentially expressed, indicating that DCA acts on a posttranslational level. Antibody quality in terms of aggregation, charge variant, and glycosylation pattern was unaffected. Subsequent bioreactor experiments with sodium lactate and sodium chloride feeding indicated that lower osmolality, rather than lower lactate concentration itself, improved culture performance in DCA cultures. In conclusion, the addition of DCA to the cell culture improved culture performance and increased antibody titers without any disadvantages for cell‐specific productivity or antibody quality.     

Studies on NK cell purification by negative selection in human peripheral blood

We have attempted to improve negative selection procedures for the large scale purification of human CD _in3 ^– CD56⁺ NK cells. In a series of experiments, purifications of NK cells from 10⁸ PBMC were performed by T cell depletion using either direct or indirect anti-CD3 labeling and the Magnetic Activated Cell Separation (MACS) procedure. Contaminating CD3⁺ cells were still present using either one of these two different T cell depletion protocols as shown by phenotyping IL-2 supplemented cell cultures on day 12. A second cycle of purification was therefore added. When MACS and Dynabeads were compared as complementary procedures to the first MACS cycle starting with 10⁸ cells, the Dynabeads method was found to be superior to the MACS with regard to the elimination of residual T cells. Starting from 10⁹ PBMC, we showed that this MACS+Dynabeads procedure gave similar satisfactory results when compared to the scaling-up of a previously established two steps procedure using Dynabeads. These two approaches (MACS+Dynabeads and 2 cycles of Dynabeads) have been also tested in a clinical setting to purify NK cells from cancer patients prior toin vitro expansion. The results indicate that the two methods are equivalent with respect to purity and recovery rate; a slight advantage in terms of feasibility was found in favor of 2 cycles of Dynabeads.     

Weak partitioning chromatography for anion exchange purification of monoclonal antibodies

Weak partitioning chromatography (WPC) is an isocratic chromatographic protein separation method performed under mobile phase conditions where a significant amount of the product protein binds to the resin, well in excess of typical flowthrough operations. The more stringent load and wash conditions lead to improved removal of more tightly binding impurities, although at the cost of a reduction in step yield. The step yield can be restored by extending the column load and incorporating a short wash at the end of the load stage. The use of WPC with anion exchange resins enables a two-column cGMP purification platform to be used for many different mAbs. The operating window for WPC can be easily established using high throughput batch-binding screens. Under conditions that favor very strong product binding, competitive effects from product binding can give rise to a reduction in column loading capacity. Robust performance of WPC anion exchange chromatography has been demonstrated in multiple cGMP mAb purification processes. Excellent clearance of host cell proteins, leached Protein A, DNA, high molecular weight species, and model virus has been achieved.     

The dynamics of the CHO host cell protein profile during clarification and protein A capture in a platform antibody purification process

Recombinant protein products such as monoclonal antibodies (mAbs) for use in the clinic must be clear of host cell impurities such as host cell protein (HCP), DNA/RNA, and high molecular weight immunogenic aggregates. Despite the need to remove and monitor HCPs, the nature, and fate of these during downstream processing (DSP) remains poorly characterized. We have applied a proteomic approach to investigate the dynamics and fate of HCPs in the supernatant of a mAb producing cell line during early DSP including centrifugation, depth filtration, and protein A capture chromatography. The primary clarification technique selected was shown to influence the HCP profile that entered subsequent downstream steps. MabSelect protein A chromatography removed the majority of contaminating proteins, however using 2D‐PAGE we could visualize not only the antibody species in the eluate (heavy and light chain) but also contaminant HCPs. These data showed that the choice of secondary clarification impacts upon the HCP profile post‐protein A chromatography as differences arose in both the presence and abundance of specific HCPs when depth filters were compared. A number of intracellularly located HCPs were identified in protein A elution fractions from a Null cell line culture supernatant including the chaperone Bip/GRP78, heat shock proteins, and the enzyme enolase. We demonstrate that the selection of early DSP steps influences the resulting HCP profile and that 2D‐PAGE can be used for monitoring and identification of HCPs post‐protein A chromatography. This approach could be used to screen cell lines or hosts to select those with reduced HCP profiles, or to identify HCPs that are problematic and difficult to remove so that cell‐engineering approaches can be applied to reduced, or eliminate, such HCPs. Biotechnol. Bioeng. 2013; 110: 240–251. © 2012 Wiley Periodicals, Inc.     

Platform development for expression and purification of stable isotope labeled monoclonal antibodies in Escherichia coli

The widespread use of monoclonal antibodies (mAbs) as a platform for therapeutic drug development in the pharmaceutical industry has led to an increased interest in robust experimental approaches for assessment of mAb structure, stability and dynamics. The ability to enrich proteins with stable isotopes is a prerequisite for the in-depth application of many structural and biophysical methods, including nuclear magnetic resonance (NMR), small angle neutron scattering, neutron reflectometry, and quantitative mass spectrometry. While mAbs can typically be produced with very high yields using mammalian cell expression, stable isotope labeling using cell culture is expensive and often impractical. The most common and cost-efficient approach to label proteins is to express proteins in Escherichia coli grown in minimal media; however, such methods for mAbs have not been reported to date. Here we present, for the first time, the expression and purification of a stable isotope labeled mAb from a genetically engineered E. coli strain capable of forming disulfide bonds in its cytoplasm. It is shown using two-dimensional NMR spectral fingerprinting that the unlabeled mAb and the mAb singly or triply labeled with ¹³C, ¹⁵N, ²H are well folded, with only minor structural differences relative to the mammalian cell-produced mAb that are attributed to the lack of glycosylation in the Fc domain. This advancement of an E. coli-based mAb expression platform will facilitate the production of mAbs for in-depth structural characterization, including the high resolution investigation of mechanisms of action.     

Cation exchange chromatography provides effective retrovirus clearance for antibody purification processes

One measure taken to ensure safety of biotherapeutics produced in mammalian cells is to demonstrate the clearance of potential viral contaminants by downstream purification processes. This paper provides evidence that cation exchange chromatography (CEX), a widely used polishing step for monoclonal antibody (mAb) production, can effectively and reproducibly remove xMuLV, a retrovirus used as a model of non‐infectious retrovirus‐like particles found in Chinese hamster ovary cells. The dominant mechanism for xMuLV clearance by the strong cation exchanger, Fractogel SO, is by retention of the virus via adsorption instead of inactivation. Experimental data defining the design space for effective xMuLV removal by Fractogel SO with respect to operational pH, elution ionic strength, loading, and load/equilibration buffer ionic strength are provided. Additionally, xMuLV is able to bind to other CEX resins, such as Fractogel COO^? and SP Sepharose Fast Flow, suggesting that this phenomenon is not restricted to one type of CEX resin. Taken together, the data indicate that CEX chromatography can be a robust and reproducible removal step for the model retrovirus xMuLV. Biotechnol. Bioeng. 2012;109: 157–165. © 2011 Wiley Periodicals, Inc.