Differences in spatial structures of the influenza virus M1 protein in crystal, solution and virion

Spatial structure of the influenza virus A/Puerto Rico/8/34 (PR8, subtype H1N1) M1 protein in a solution and composition of the virion was studied by tritium planigraphy technique. The special algorithm for modeling of the spatial structure is used to simulate the experiment, as well as a set of algorithms predicting secondary structure and disordered regions in proteins. Tertiary structures were refined using the program Rosetta. To compare the structures in solution and in virion, also used the X-ray diffraction data for NM-domain. The main difference between protein structure in solution and crystal is observed in the contact region of N- and M-domains, which are more densely packed in the crystalline state. Locations include the maximum label is almost identical to the unstructured regions of proteins predicted by bioinformatics analysis. These areas are concentrated in the C-domain and in the loop regions between the M-, N-, and C-domains. Analytical centrifugation and dynamic laser light scattering confirm data of tritium planigraphy. Anomalous hydrodynamic size, and low structuring of the M1 protein in solution were found. The multifunctionality of protein in the cell appears to be associated with its plastic tertiary structure, which provides at the expense of unstructured regions of contact with various molecules-partners.     

Intrinsically unstructured regions in the C domain of the influenza virus M1 protein

The M1 matrix protein of the influenza virus is one of the main structural components of the virion that performs several different functions in the infected cell. X-ray analysis (with 2.08 Å resolution) has been performed for the N-terminal part of the M1 protein (residues 2–158) but not for its C-terminal domain (159–252). In the present study, we analyzed the structure of the M1 protein of the influenza virus A/Puerto Rico/8/34 (H1N1) strain in acidic solution using tritium planigraphy. The incorporation of tritium label into the domains of the M1 protein were studied; the C domain and the interdomain loops are preferentially accessible to tritium. Analytical centrifugation and dynamic laser light scattering demonstrated anomalous hydrodynamic parameters and low structuredness of the M1 protein, which has also been confirmed by circular dichroism data. Bioinformatic analysis of the M1 protein sequence revealed intrinsically unstructured segments that were concentrated in the C domain and interdomain loops between the N-, M-, and C domains. We suggest that the multifunctionality of the M1 protein in a cell is determined by the plasticity of its tertiary structure, which is caused by the presence of intrinsically unstructured segments.     

Disordered regions in C-domain structure of influenza virus M1 protein

Influenza virus matrix M1 protein is one of the main structural components of the virion performing also many different functions in infected cell. X-ray analysis data with 2.08 angstrom resolution were obtained only for the N-terminal part of M1 protein molecule (residues 2-158) but not for its C-terminal domain (159-252). In the present work M1 protein of A/Puerto Rico/8/34 (H1N1) virus strain in acidic solution was investigated with the help of tritium bombardment. Tritium label incorporation into M1 protein domains preferentially labeled the C-domain and inter-domain loops. Analytical centrifugation and dynamic light scattering experiments demonstrated increased hydrodynamic parameters (diameter) that may be explained by low degree of M1 structural organization. Computational analysis of M1 protein by intrinsic disorder predictions methods also demonstrated the presence of unfolded regions mostly in the C-domain and inter-domain loops. It is suggested, that influenza virus M1 polyfunctionality in infected cell is determined by its tertiary structure plasticity which in its turn results from the presence of unstructured regions.     

Natively unfolded domains in endocytosis: hooks, lines and linkers

It is commonly assumed that a protein must adopt a tertiary structure to achieve its active native state and that regions of a protein that are devoid of alpha-helix or beta-sheet structures are functionally inert. Although extended proline-rich regions are recognized as presenting binding motifs to, for example, Src homology 2 (SH2) and SH3 domains, the idea persists that natively unfolded regions in functional proteins are simply 'spacers' between the folded domains. Such a view has been challenged in recent years and the importance of natively unfolded proteins in biology is now being recognized. In this review, we highlight the role of natively unfolded domains in the field of endocytosis, and show that some important endocytic proteins lack a traditionally folded structure and harbour important binding motifs in their unstructured linker regions.     

Identifying foldable regions in protein sequence from the hydrophobic signal

Structural genomics initiatives aim to elucidate representative 3D structures for the majority of protein families over the next decade, but many obstacles must be overcome. The correct design of constructs is extremely important since many proteins will be too large or contain unstructured regions and will not be amenable to crystallization. It is therefore essential to identify regions in protein sequences that are likely to be suitable for structural study. Scooby-Domain is a fast and simple method to identify globular domains in protein sequences. Domains are compact units of protein structure and their correct delineation will aid structural elucidation through a divide-and-conquer approach. Scooby-Domain predictions are based on the observed lengths and hydrophobicities of domains from proteins with known tertiary structure. The prediction method employs an A*-search to identify sequence regions that form a globular structure and those that are unstructured. On a test set of 173 proteins with consensus CATH and SCOP domain definitions, Scooby-Domain has a sensitivity of 50% and an accuracy of 29%, which is better than current state-of-the-art methods. The method does not rely on homology searches and, therefore, can identify previously unknown domains.     

Structure of crambin in solution, crystal and in the trajectories of molecular dynamics simulations

The mechanisms of the three-dimensional crambin structure alterations in the crystalline environments and in the trajectories of the molecular dynamics simulations in the vacuum and crystal surroundings have been analyzed. In the crystalline state and in the solution the partial regrouping of remote intramolecular packing contacts, involved in the formation and stabilization of the tertiary structure of the crambin molecule, occurs in NMR structures. In the crystalline state it is initiated by the formation of the intermolecular contacts, the conformational influence of its appearance is distributed over the structure. The changes of the conformations and positions of the residues of the loop segments, where the intermolecular contacts of the crystal surroundings are preferably concentrated, are most observable. Under the influence of these contacts the principal change of the regular secondary structure of crambin is taking place: extension of the two-strand β structure to the three-strand structure with the participation of the single last residue N46 of the C-terminal loop. In comparison with the C-terminal loop the more profound changes are observed in the conformation and the atomic positions of the backbone atoms and in the solvent accessibility of the residues of the interhelical loop. In the solution of the ensemble of the 8 NMR structures relative accessibility to the solvent differs more noticeably also in the region of the loop segments and rather markedly in the interhelical loop. In the crambin cryogenic crystal structures the positions of the atoms of the backbone and/or side chain of 14–18 of 46 residues are discretely disordered. The disorganizations of at least 8 of 14 residues occur directly in the regions of the intermolecular contacts and another 5 residues are disordered indirectly through the intramolecular contacts with the residues of the intermolecular contacts. Upon the molecular dynamics simulation in the vacuum surrounding as in the solution of the crystalline structure of crambin the essential changes of the backbone conformation are caused by the intermolecular contacts absence, but partly masked by the structure changes owing to the nonpolar H atoms absence on the simulated structure. The intermolecular contact absence is partly manifested upon the molecular dynamics simulation of the crambin crystal with one protein molecule. Compared to the crystal structure the lengths of the interpeptide hydrogen bonds and other interresidue contacts in an average solution NMR structure are somewhat shorter and accordingly the energy of the interpeptide hydrogen bonds is better. This length shortening can occur at the stage of the refinement of the NMR structures of the crambin and other proteins by its energy minimizations in the vacuum surroundings and not exist in the solution protein structures.     

Atomistic ensemble modeling and small-angle neutron scattering of intrinsically disordered protein complexes: applied to minichromosome maintenance protein

The minichromosome maintenance (MCM) proteins are thought to function as the replicative helicases in archaea and eukarya. In this work we determined the solution structure of the N-terminal portion of the MCM complex from the archaeon Methanothermobacter thermautotrophicus (N-mtMCM) in the presence and absence of DNA using small-angle neutron scattering (SANS). N-mtMCM is a multimeric protein complex that consists of 12 monomers, each of which contains three distinct domains and two unstructured regions. Using an all-atom approach incorporating modern force field and Monte Carlo methods to allow the unstructured regions of each monomer to be varied independently, we generated an ensemble of biologically relevant structures for the complex. An examination of the subsets of structures that were most consistent with the SANS data revealed that large movements between the three domains of N-mtMCM can occur in solution. Furthermore, changes in the SANS curves upon DNA binding could be correlated to the motion of a particular N-mtMCM domain. These results provide structural support to the previously reported biochemical observations that large domain motions are required for the activation of the MCM helicase in archaea and eukarya. The methods developed here for N-mtMCM solution structure modeling should be suitable for other large protein complexes with unstructured flexible regions.     

Solution structure of the RecQ C-terminal domain of human Bloom syndrome protein

RecQ C-terminal (RQC) domain is known as the main DNA binding module of RecQ helicases such as Bloom syndrome protein (BLM) and Werner syndrome protein (WRN) that recognizes various DNA structures. Even though BLM is able to resolve various DNA structures similarly to WRN, BLM has different binding preferences for DNA substrates from WRN. In this study, we determined the solution structure of the RQC domain of human BLM. The structure shares the common winged-helix motif with other RQC domains. However, half of the N-terminal has unstructured regions (α1–α2 loop and α3 region), and the aromatic side chain on the top of the β-hairpin, which is important for DNA duplex strand separation in other RQC domains, is substituted with a negatively charged residue (D1165) followed by the polar residue (Q1166). The structurally distinctive features of the RQC domain of human BLM suggest that the DNA binding modes of the BLM RQC domain may be different from those of other RQC domains.     

Structure of the C-terminal domain from Trypanosoma brucei variant surface glycoprotein MITat1.2

The variant surface glycoprotein (VSG) of African trypanosomes has a structural role in protecting other cell surface proteins from effector molecules of the mammalian immune system and also undergoes antigenic variation necessary for a persistent infection in a host. Here we have reported the solution structure of a VSG type 2 C-terminal domain from MITat1.2, completing the first structure of both domains of a VSG. The isolated C-terminal domain is a monomer in solution and forms a novel fold, which commences with a short alpha-helix followed by a single turn of 3(10)-helix and connected by a short loop to a small anti-parallel beta-sheet and then a longer alpha-helix at the C terminus. This compact domain is flanked by two unstructured regions. The structured part of the domain contains 42 residues, and the core comprises 2 disulfide bonds and 2 hydrophobic residues. These cysteines and hydrophobic residues are conserved in other VSGs, and we have modeled the structures of two further VSG C-terminal domains using the structure of MITat1.2. The models suggest that the overall structure of the core is conserved in the different VSGs but that the C-terminal alpha-helix is of variable length and depends on the presence of charged residues. The results provided evidence for a conserved tertiary structure for all the type 2 VSG C-terminal domains, indicated that VSG dimers form through interactions between N-terminal domains, and showed that the selection pressure for sequence variation within a conserved tertiary structure acts on the whole of the VSG molecule.     

Interaction between domains in chromosomal protein HMG-1.

Peptides corresponding to the N-terminal, central and central plus C-terminal domains of high mobility group protein HMG-1 from calf thymus have been isolated after digestion in solution with protease V8 under structuring conditions (0.35 M NaCl, pH 7.1). The effect of the interaction of these peptides with DNA on the topological properties of the nucleic acid has been studied and compared with the change in superhelicity produced by the whole protein. It appears that the region responsible for this effect is the central domain of HMG-1. The isolated N-terminal and central domains of this protein maintain their secondary and tertiary structure as observed by spectroscopic techniques. However, when the central domain is covalently linked only to the acidic C-terminal part of the molecule, its secondary and tertiary structures are lost as well as its property to alter DNA superhelicity. The results are discussed in relation to the interactions occurring between the different domains and the possible functional interactions of this protein.     

What is the average conformation of bacteriophage T4 lysozyme in solution? A domain orientation study using dipolar couplings measured by solution NMR

Lysozyme from T4 bacteriophage is comprised of two domains that are both involved in binding substrate. Although wild-type lysozyme has been exclusively crystallized in a closed form that is similar to the peptidoglycan-bound conformation, a more open structure is thought to be required for ligand binding. To determine the relative arrangement of domains within T4 lysozyme in the solution state, dipolar couplings were measured in several different dilute liquid crystalline media by solution NMR methods. The dipolar coupling data were analyzed with a domain orientation procedure described previously that utilizes high- resolution X-ray structures. The cleft between the domains is significantly larger in the average solution structure than what is observed in the X-ray structure of the ligand-free form of the protein (approximately 17 degrees closure from solution to X-ray structures). A comparison of the solution domain orientation with X-ray-derived structures in the protein data base shows that the solution structure resembles a crystal structure obtained for the M6I mutant. Dipolar couplings were also measured on the lysozyme mutant T21C/T142C, which was oxidized to form an inter-domain disulfide bond (T4SS). In this case, the inter-domain solution structure was found to be more closed than was observed in the crystal (approximately 11 degrees). Direct refinement of lysozyme crystal structures with the measured dipolar couplings using the program CNS, establishes that this degree of closure can be accommodated whilst maintaining the inter-domain cystine bond. The differences between the average solution conformations obtained using dipolar couplings and the crystal conformations for both forms of lysozyme investigated in this study illustrate the impact that crystal packing interactions can have on the arrangement of domains within proteins and the importance of alternative methods to X-ray crystallography for evaluating inter-domain structure.     

Solution structure of the chicken cysteine-rich protein, CRP1, a double-LIM protein implicated in muscle differentiation

The mechanism by which the contractile machinery of muscle is assembled and maintained is not well-understood. Members of the cysteine-rich protein (CRP) family have been implicated in these processes. Three vertebrate CRPs (CRP1-3) that exhibit developmentally regulated muscle-specific expression have been identified. All three proteins are associated with the actin cytoskeleton, and one has been shown to be required for striated muscle structure and function. The vertebrate CRPs identified to date display a similar molecular architecture; each protein is comprised of two tandemly arrayed LIM domains, protein-binding motifs found in a number of proteins with roles in cell differentiation. Each LIM domain coordinates two Zn(II) ions that are bound independently in CCHC (C=Cys, H=His) and CCCC modules. Here we describe the solution structure of chicken CRP1 determined by homonuclear and 1H-15N heteronuclear magnetic resonance spectroscopy. Comparison of the structures of the two LIM domains of CRP1 reveals a high degree of similarity in their tertiary folds. In addition, the two component LIM domains represent two completely independent folding units and exhibit no apparent interactions with each other. The structural independence and spatial separation of the two LIM domains of CRP1 are compatible with an adapter or linker role for the protein.     

Unlocking of the filamentous bacteriophage virion during infection is mediated by the C domain of pIII

Protein III (pIII) of filamentous phage is required for both the beginning and the end of the phage life cycle. The infection starts by binding of the N-terminal N2 and N1 domains to the primary and secondary host receptors, F pilus and TolA protein, respectively, whereas the life cycle terminates by the C-terminal domain-mediated release of the membrane-anchored virion from the cell. It has been assumed that the role of the C-terminal domain of pIII in the infection is that of a tether for the receptor-binding domains N1N2 to the main body of the virion. In a poorly understood process that follows receptor binding, the virion disassembles as its protein(s) become integrated into the host inner membrane, resulting in the phage genome entry into the bacterial cytoplasm. To begin revealing the mechanism of this process, we showed that tethering the functional N1N2 receptor-binding domain to the virion via termination-incompetent C domain abolishes infection. This infection defect cannot be complemented by in trans supply of the functional C domain. Therefore, the C domain of pIII acts in concert with the receptor-binding domains to mediate the post receptor binding events in the infection. Based on these findings, we propose a model in which binding of the N1 domain to the periplasmic portion of TolA, the secondary receptor, triggers in cis a conformational change in the C domain, and that this change opens or unlocks the pIII end of the virion, allowing the entry phase of infection to proceed. To our knowledge, this is the first virus that uses the same protein domain both for the insertion into and release from the host membrane.     

Domain study of bacteriophage p22 coat protein and characterization of the capsid lattice transformation by hydrogen/deuterium exchange

Viral capsids are dynamic structures which undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Limited proteolysis and biochemical experiments indicated that the coat protein consists of two domains connected by a flexible loop. To investigate the properties and roles of the sub-domains, we have cloned them and initiated structure and function studies. The N-terminal domain, which is made up of 190 amino acid residues, is largely unstructured in solution, while the C-terminal domain, which consists of 239 amino acid residues, forms a stable non-covalent dimer. The N-terminal domain adopts additional structure in the context of the C-terminal domain which might form a platform on which the N-terminal domain can fold. The local dynamics of the coat protein in both procapsids and mature capsids was monitored by hydrogen/deuterium exchange combined with mass spectrometry. The exchange rate for C-terminal domain peptides was similar in both forms. However, the N-terminal domain was more flexible in the empty procapsid shells than in the mature capsids. The flexibility of the N-terminal domain observed in the solution persisted into the procapsid form, but was lost upon maturation. The loop region connecting the two domains exchanged rapidly in the empty procapsid shells, but more slowly in the mature capsids. The global stabilization of the N-terminal domain and the flexibility encoded in the loop region may be a key component of the maturation process.     

A dihydropyridine receptor alpha1s loop region critical for skeletal muscle contraction is intrinsically unstructured and binds to a SPRY domain of the type 1 ryanodine receptor

The II-III loop of the dihydropyridine receptor (DHPR) alpha(1s) subunit is a modulator of the ryanodine receptor (RyR1) Ca(2+) release channel in vitro and is essential for skeletal muscle contraction in vivo. Despite its importance, the structure of this loop has not been reported. We have investigated its structure using a suite of NMR techniques which revealed that the DHPR II-III loop is an intrinsically unstructured protein (IUP) and as such belongs to a burgeoning structural class of functionally important proteins. The loop does not possess a stable tertiary fold: it is highly flexible, with a strong N-terminal helix followed by nascent helical/turn elements and unstructured segments. Its residual structure is loosely globular with the N and C termini in close proximity. The unstructured nature of the II-III loop may allow it to easily modify its interaction with RyR1 following a surface action potential and thus initiate rapid Ca(2+) release and contraction. The in vitro binding partner for the II-III was investigated. The II-III loop interacts with the second of three structurally distinct SPRY domains in RyR1, whose function is unknown. This interaction occurs through two preformed N-terminal alpha-helical regions and a C-terminal hydrophobic element. The A peptide corresponding to the helical N-terminal region is a common probe of RyR function and binds to the same SPRY domain as the full II-III loop. Thus the second SPRY domain is an in vitro binding site for the II-III loop. The possible in vivo role of this region is discussed.     

Structural mechanism for lipid activation of the Rac-specific GAP, beta2-chimaerin

The lipid second messenger diacylglycerol acts by binding to the C1 domains of target proteins, which translocate to cell membranes and are allosterically activated. Here we report the crystal structure at 3.2 A resolution of one such protein, beta2-chimaerin, a GTPase-activating protein for the small GTPase Rac, in its inactive conformation. The structure shows that in the inactive state, the N terminus of beta2-chimaerin protrudes into the active site of the RacGAP domain, sterically blocking Rac binding. The diacylglycerol and phospholipid membrane binding site on the C1 domain is buried by contacts with the four different regions of beta2-chimaerin: the N terminus, SH2 domain, RacGAP domain, and the linker between the SH2 and C1 domains. Phospholipid binding to the C1 domain triggers the cooperative dissociation of these interactions, allowing the N terminus to move out of the active site and thereby activating the enzyme.     

Ligand-induced structural changes to maltodextrin-binding protein as studied by solution NMR spectroscopy

Solution NMR studies on the physiologically relevant ligand-free and maltotriose-bound states of maltodextrin-binding protein (MBP) are presented. Together with existing data on MBP in complex with beta-cyclodextrin (non-physiological, inactive ligand), these new results provide valuable information on changes in local structure, dynamics and global fold that occur upon ligand binding to this two-domain protein. By measuring a large number of different one-bond residual dipolar couplings, the domain conformations, critical for biological function, were investigated for all three states of MBP. Structural models of the solution conformation of MBP in a number of different forms were generated from the experimental dipolar coupling data and X-ray crystal structures using a quasi-rigid-body domain orientation algorithm implemented in the structure calculation program CNS. Excellent agreement between relative domain orientations in ligand-free and maltotriose-bound solution conformations and the corresponding crystal structures is observed. These results are in contrast to those obtained for the MBP/beta-cyclodextrin complex where the solution state is found to be approximately 10 degrees more closed than the crystalline state. The present study highlights the utility of residual dipolar couplings for orienting protein domains or macromolecules with respect to each other.     

Mutational analysis reveals a single binding interface between RhoA and its effector, PRK1

Protein kinase C-related kinases (PRKs) are serine/threonine kinases that are members of the protein kinase C superfamily and can be activated by binding to members of the Rho family of small G proteins via a Rho binding motif known as an HR1 domain. The PRKs contain three tandem HR1 domains at their N-termini. The structure of the HR1a domain from PRK1 in complex with RhoA [Maesaki, R., et al. (1999) Mol. Cell 4, 793-803] identified two potential contact interfaces between the G protein and the HR1a domain. In this work, we have used an alanine scanning mutagenesis approach to identify whether both contact sites are used when the two proteins interact in solution and also whether HR1b, the second HR1 domain from PRK1, plays a role in binding to RhoA. The mutagenesis identified just one contact site as being relevant for binding of RhoA and HR1a in solution, and the HR1b domain was found not to contribute to RhoA binding. The folded state and thermal stability of the HR1a and HR1b domains were also investigated. HR1b was found to be more thermally stable than HR1a, and it is hypothesized that the differences in the biophysical properties of these two domains govern their interaction with small G proteins.     

The N-terminal domain (IF2N) of bacterial translation initiation factor IF2 is connected to the conserved C-terminal domains by a flexible linker

Bacterial translation initiation factor IF2 is a multidomain protein that is an essential component of a system for ensuring that protein synthesis begins at the correct codon within a messenger RNA. Full-length IF2 from Escherichia coli and seven fragments of the protein were expressed, purified, and characterized using nuclear magnetic resonance (NMR) and circular dichroism (CD) methods. Interestingly, resonances of the 6 kD IF2N domain located at the extreme N terminus of IF2 can be clearly identified within the NMR spectra of the full-length 97-kD protein. (15)N NMR relaxation rate data indicate that (1) the IF2N domain is internally well ordered and tumbles in solution in a manner that is independent of the other domains of the IF2 protein, and (2) the IF2N domain is connected to the C-terminal regions of IF2 by a flexible linker. Chemical shifts of resonances within the isolated IF2N domain do not significantly differ from those of the corresponding residues within the context of the full-length 97-kD protein, indicating that IF2N is a structurally independent unit that does not strongly interact with other regions of IF2. CD and NMR data together provide evidence that Domains I-III of IF2 have unstructured and flexible regions as well as substantial helical content; CD data indicate that the helical content of these regions decreases significantly at temperatures above 35 degrees C. The features of structurally well-ordered N- and C-terminal domains connected by a flexible linker with significant helical content are reminiscent of another translation initiation factor, IF3.     

The N-terminal domain of human centrin 2 has a closed structure, binds calcium with a very low affinity, and plays a role in the protein self-assembly

Centrins are well-conserved calcium binding proteins from the EF-hand superfamily implicated in various cellular functions, such as centrosome duplication, DNA repair, and nuclear mRNA export. The intrinsic molecular flexibility and the self-association tendency make difficult the structural characterization of the integral protein. In this paper we report the solution structure, the Ca2+ binding properties, and the intermolecular interactions of the N-terminal domain of two human centrin isoforms, HsCen1 and HsCen2. In the absence of Ca2+, the N-terminal construct of HsCen2 revealed a compact core conformation including four almost antiparallel alpha-helices and a short antiparallel beta-sheet, very similar to the apo state structure of other calcium regulatory EF-hand domains. The first 25 residues show a highly irregular and dynamic structure. The three-dimensional model for the N-terminal domain of HsCen1, based on the high sequence conservation and NMR spectroscopic data, shows very close structural properties. Ca2+ titration of the apo-N-terminal domain of HsCen1 and HsCen2, monitored by NMR spectroscopy, revealed a very weak affinity (10(2)-10(3) M(-1)), suggesting that the cellular role of this domain is not calcium dependent. Isothermal calorimetric titrations showed that an 18-residue peptide, derived from the N-terminal unstructured fragment, has a significant affinity (approximately 10(5) M(-1)) for the isolated C-terminal domain, suggesting an active role in the self-assembly of centrin molecules.