The effect of combined simulated microgravity and microgrooved surface topography on fibroblasts

This study evaluated in vitro the differences in morphological behaviour between fibroblast cultured on smooth and microgrooved substrata (groove depth: 0.5 microm, width: 1, 2, 5, and 10 microm), which were subjected to simulated microgravity. The aim of the study was to clarify which of these parameters was more dominant to determine cell behaviour. Morphological characteristics were investigated using scanning electron microscopy and fluorescence microscopy in order to obtain qualitative information on cell alignment and area. Confocal laser scanning microscopy visualised distribution of actin filaments and focal adhesion points. Finally, expression of collagen type I, fibronectin, and alpha1- and beta1-integrin were investigated by PCR. Microscopy and image analysis showed that the fibroblasts aligned along the groove direction on all textured surfaces. On the smooth substrata, cells had spread out in a random fashion. The alignment of cells cultured on grooved surfaces decreased under simulated microgravity, especially after 24 h of culturing. Cell surface area on grooved substrata were significantly smaller than on smooth substrata, but simulated microgravity on the grooved groups resulted in an enlargement of cell area. ANOVA was performed on all main parameters: topography, gravity force, and time. In this analysis, all parameters proved significant. In addition, gene levels were reduced by microgravity particularly those of beta1-integrin and fibronectin. From our data it is concluded that the fibroblasts primarily adjust their shape according to morphological environmental cues like substratum surface whilst a secondary, but significant, role is played by microgravity conditions.     

The effect of combined hypergravity and micro-grooved surface topography on the behaviour of fibroblasts

This study evaluated in vitro the differences in morphological behaviour between fibroblast cultured on smooth and micro-grooved substrata (groove depth: 1 mum, width: 1, 2, 5, 10 microm), which undergo artificial hypergravity by centrifugation (10, 24 and 50 g; or 1 g control). The aim of the study was to clarify which of these parameters was more important to determine cell behaviour. Morphological characteristics were investigated using scanning electron microscopy and fluorescence microscopy in order to obtain qualitative information on cell spreading and alignment. Confocal laser scanning microscopy visualised distribution of actin filaments and vinculin anchoring points through immunostaining. Finally, expression of collagen type I, fibronectin, and alpha(1)- and beta(1)-integrin were investigated by PCR. Microscopy and image analysis showed that the fibroblasts aligned along the groove direction on all textured surfaces. On the smooth substrata (control), cells spread out in a random fashion. The alignment of cells cultured on grooved surfaces increased with higher g-forces until a peak value at 25 g. An ANOVA was performed on the data, for all main parameters: topography, gravity force, and time. In this analysis, all parameters proved significant. In addition, most gene levels were reduced by hypergravity. Still, collagen type 1 and fibronectin are seemingly unaffected by time or force. From our data it is concluded that the fibroblasts primarily adjust their shape according to morphological environmental cues like substratum surface whilst a secondary, but significant, role is played by hypergravity forces.     

Different beta 1-integrin collagen receptors on rat hepatocytes and cardiac fibroblasts

Detergent extracts of primary rat hepatocytes and neonatal cardiac fibroblasts were applied to collagen type I-Sepharose in the presence of 1 mM MnCl2. Elution of bound proteins by 10 mM EDTA yielded one beta 1-integrin heterodimer from hepatocytes with an Mr of 180,000/115,000 under nonreducing conditions. Two beta 1-integrins with Mr's (nonreduced) of 180,000/115,000 and 145,000/115,000 could be isolated from surface-iodinated fibroblasts. A monoclonal antibody, 3A3, directed against the rat homolog of the human integrin VLA-1, precipitated the affinity-purified Mr 180,000/115,000 heterodimer, establishing the relatedness of the Mr 180,000 subunit to the alpha 1-chain of the beta 1-integrin subfamily. Both the alpha 1 beta 1-integrin and the 145,000/beta 1-integrin heterodimers bound specifically to Sepharose beads derivatized with the collagen fragment alpha 1(I) CB3, which lacks RGD sequences. Immunofluorescence staining using the 3A3 monoclonal antibody revealed that the rat alpha 1 beta 1-integrin was present at focal adhesion sites of fibroblasts grown on native collagen type I- but not on fibronectin-coated substrates, although both types of substrates supported the formation of beta 1-integrin containing focal adhesions. Similarly, hepatocytes cultured on substrata coated with collagen type I (but not fibronectin) were stained in a patchy pattern localized to the cell periphery by 3A3 IgG. Furthermore, 3A3 IgG completely inhibited the attachment of hepatocytes to collagen type I, whereas under identical conditions the attachment of fibroblasts to these substrates was inhibited only by approximately 40%. The attachment of both hepatocytes and cardiac fibroblasts to fibronectin was unaffected by the presence of the 3A3 antibody. Collectively these data show that a rat homolog of the human VLA-1 heterodimer both biochemically and functionally fulfills the criteria of a single collagen receptor on rat hepatocytes. In contrast, rat cardiac fibroblasts utilize two different collagen-binding integrins to adhere to collagen, one of which is the rat homolog of the human VLA-1 heterodimer. Furthermore alpha 1(I) CB3 contains cell binding sites for beta 1-integrins.     

Analysis of alpha 1 beta 1, alpha 2 beta 1 and alpha 3 beta 1 integrins in cell--collagen interactions: identification of conformation dependent alpha 1 beta 1 binding sites in collagen type I.

Integrins can mediate the attachment of cells to collagen type I. In the present study we have investigated the possible differences in collagen type I recognition sites for the alpha 1 beta 1 and alpha 2 beta 1 integrins. Different cyanogen bromide (CB) fragments of the alpha 1 (I) collagen chain were used in cell attachment experiments with three rat cell types, defined with regard to expression of collagen binding integrins. Primary rat hepatocytes expressed alpha 1 beta 1, primary rat cardiac fibroblasts alpha 1 beta 1 and alpha 2 beta 1, and Rat-1 cells only alpha 2 beta 1. All three cell types expressed alpha 3 beta 1 but this integrin did not bind to collagen--Sepharose or to immobilized collagen type I in a radioreceptor assay. Hepatocytes and cardiac fibroblasts attached to substrata coated with alpha 1(I)CB3 and alpha 1(I)CB8; Rat-1 cells attached to alpha 1(I)CB3 but only poorly to alpha 1(I)CB8-coated substrata. Cardiac fibroblasts and Rat-1 cells spread and formed beta 1-integrin-containing focal adhesions when grown on substrata coated with native collagen or alpha 1(I)CB3; focal adhesions were also detected in cardiac fibroblasts cultured on alpha 1(I)CB8. The rat alpha 1 specific monoclonal antibody 3A3 completely inhibited hepatocyte attachment to alpha 1(I)CB3 and alpha 1(I)CB8, as well as the attachment of cardiac fibroblasts to alpha 1(I)CB8, but only partially inhibited the attachment of cardiac fibroblasts to alpha 1(I)CB3. 3A3 IgG did not inhibit the attachment of Rat-1 cells to collagen type I or to alpha 1(I)CB3.(ABSTRACT TRUNCATED AT 250 WORDS)     

Fibroblasts on micromachined substrata orient hierarchically to grooves of different dimensions

Contact guidance was studied by light, scanning (SEM) and transmission electron microscopy (TEM) in cultures of human gingival fibroblasts cultured on grooved surfaces. The grooves were originally produced in silicon wafers by micromachining, a process which is based on the methods used to fabricate microelectronic components, and the grooved surfaces were then replicated in Epon. Micromachining enables precise control of groove depth, groove spacing, and groove shape to be obtained. In silicon wafers with appropriate crystal orientation, a second smaller set of grooves, called the minor grooves, is found on the floor of the major grooves. The minor grooves are oriented at a 54 degree angle to the major grooves, so that cells cultured on such surfaces are concurrently exposed to grooves of different dimensions which direct cell migration in different directions. Marked fibroblast alignment with the major grooves was observed both within the grooves and in the intervening flat ridges between the grooves. In addition, shallow and closely spaced grooves in epon or titanium-coated polymer or silicon were also capable of orienting fibroblasts. Although the minor grooves were able to orient fibroblasts in the absence of any other orienting influence, when fibroblasts were concurrently exposed to major and minor grooves the cells aligned themselves with the major grooves. TEM showed that the cellular filamentous cytoskeletal elements reflected the orientation of the cell as a whole. Fibroblasts on grooved substrata appeared to have more filopodia and to round up more frequently than fibroblasts cultured on flat substrata. It is suggested that both the mechanical properties of the cytoskeleton as well as the durability of the cellular attachment to groove edges may play a role in the contact guidance effected by grooved surfaces produced by micromachining.     

Alpha2beta1-integrin signaling by itself controls G1/S transition in a human adenocarcinoma cell line (Caco-2): implication of NADPH oxidase-dependent production of ROS

In this work, we report that type IV collagen, mainly via alpha2beta1-integrin ligation, was able to induce cyclin expression and G1/S transition in a colic adenocarcinoma cell line (Caco-2) cultured without soluble growth factors or fetal bovine serum. This process involved Erk 1/2 activation and the production of reactive oxygen species (ROS) by a membrane-bound NADPH oxidase. Data presented here show that NADPH oxidase-dependent production of ROS increased following alpha2beta1-integrin ligation with type IV collagen or with a specific monoclonal antibody (Gi9 mAb). NADPH oxidase activation and, therefore, the production of ROS were shown to be involved in the increase of alpha2beta1-integrin plasma membrane expression, p38 MAPK phosphorylation, cyclin expression, and G1/S transition. We thus identified in this work a new integrin-signaling pathway in colon tumor cells involved in cell cycle regulation by the extracellular matrix.     

Dynamics of beta1-integrins in living fibroblasts--effect of substratum wettability

The dynamics of integrin receptors mobility was studied in living human fibroblasts using fluorescence-labeled beta(1)-integrin monoclonal antibodies. Time-lapse image series were obtained by confocal laser scanning microscopy when cells were adhering on model hydrophilic (clean glass) and hydrophobic (octadecyl-silanized; i.e., ODS) surfaces coated with fibronectin. Direct measurements showed approximately twice-higher velocity of integrins on glass compared to ODS, and these velocities varied in different zones of the cells. A kinetic model and algorithm for quantification of images was developed, and the analysis identified three receptor populations on glass: immobilized (82.76% of all), slow (4.16%), and fast (13.08%), while, on ODS, only two were identified: immobilized (83.36%) and fast (16.64%). Fast integrins in the peripheral zone of cells have maximal velocities of 0.353 +/- 0.02 mum/min (n = 48, four cells) on hydrophilic and 0.218 +/- 0.02 mum/min (n = 30, three cells) on hydrophobic substrata. The slow population has a velocity of 0.114 mum/min (n = 48, four cells). Further analyses show that these velocities also differ significantly in the peripheral and middle zones of cells in a substrate-dependent fashion. A well-defined circular motion of receptors around the cell center expressed mainly on hydrophobic substrata was monitored and quantified as well.     

Integrin shedding as a mechanism of cellular adaptation during cardiac growth

Integrin-mediated cell-extracellular matrix (ECM) interactions are essential for multiple cellular processes; however, little is known regarding integrin turnover during these events. Recent studies have demonstrated shedding of cell surface molecules and suggested this as a potential mechanism for integrin turnover. Confocal microscopy of mouse hearts under different physiological conditions demonstrated the presence of beta(1)-integrin-immunoreactive material in the interstitium. Culture media from neonatal rat cardiac myocytes and fibroblasts contained a 55-kDa fragment of beta(1)-integrin. Attachment to ECM components, response to phorbol 12-myristate 13-acetate stimulation, and matrix metalloproteinase inhibition assays demonstrated that fibroblasts responded differently to the fragment compared with myocytes. The beta(1)-integrin fragment stimulated myocyte attachment to collagen and the fragment itself bound a variety of ECM proteins. These studies indicate that as myocytes and fibroblasts change size and shape, cellular contacts with the ECM are altered, resulting in the liberation of a beta(1)-integrin fragment from the cell surface. Integrin shedding may represent a novel mechanism of rapidly modifying cell-ECM contacts during various cellular processes.     

Microvessel vascular smooth muscle cells contribute to collagen type I deposition through ERK1/2 MAP kinase, alphavbeta3-integrin, and TGF-beta1 in response to ANG II and high glucose

This study determines that vascular smooth muscle cell (VSMC) signaling through extracellular signal-regulated kinase (ERK) 1/2-mitogen-activated protein (MAP) kinase, alphavbeta(3)-integrin, and transforming growth factor (TGF)-beta1 dictates collagen type I network induction in mesenteric resistance arteries (MRA) from type 1 diabetic (streptozotocin) or hypertensive (HT; ANG II) mice. Isolated MRA were subjected to a pressure-passive-diameter relationship. To delineate cell types and mechanisms, cultured VSMC were prepared from MRA and stimulated with ANG II (100 nM) and high glucose (HG, 22 mM). Pressure-passive-diameter relationship reduction was associated with increased collagen type I deposition in MRA from HT and diabetic mice compared with control. Treatment of HT and diabetic mice with neutralizing TGF-beta1 antibody reduced MRA stiffness and collagen type I deposition. Cultured VSMC stimulated with HG or ANG II for 5 min increased ERK1/2-MAP kinase phosphorylation, whereas a 48-h stimulation induced latent TGF-beta1, alphavbeta(3)-integrin, and collagen type 1 release in the conditioned media. TGF-beta1 bioactivity and Smad2 phosphorylation were alphavbeta(3)-integrin-dependent, since beta(3)-integrin antibody and alphavbeta(3)-integrin inhibitor (SB-223245, 10 microM) significantly prevented TGF-beta1 bioactivity and Smad2 phosphorylation. Pretreatment of VSMC with ERK1/2-MAP kinase inhibitor (U-0126, 1 microM) reduced alphavbeta(3)-integrin, TGF-beta1, and collagen type 1 content. Additionally, alphavbeta(3)-integrin antibody, SB-223245, TGF-beta1-small-intefering RNA (siRNA), and Smad2-siRNA (40 nM) prevented collagen type I network formation in response to ANG II and HG. Together, these data provide evidence that resistance artery fibrosis in type 1 diabetes and hypertension is a consequence of abnormal collagen type I release by VSMC and involves ERK1/2, alphavbeta(3)-integrin, and TGF-beta1 signaling. This pathway could be a potential target for overcoming small artery complications in diabetes and hypertension.     

Primary cultures of hepatocytes on human fibroblasts

Summary Parenchymal hepatocytes isolated from adult rats were cultured on three types of collagen-containing substrata: collagen-coated plates, collagen membranes and confluent diploid human fibroblasts. Hepatocytes on the latter two substrata maintained characteristic morphology for at least 10 days in culture, whereas degenerative changes (cell death and formation of multinucleated hepatocytes) and growth of nonparenchymal elements were seen after 5 days in cultures on collagen-coated plates. Parallel findings were seen on basal and induced levels of cytochrome P-450 and NADPH-cytochrome C reductase. The basal levels of cytochrome P-450 were not measurable after day 3 in hepatocytes cultured on collagen-coated plates, whereas measurable levels were maintained in the hepatocytes cultured on the other two substrata. Addition of phenobarbital or methylcholanthrene at day 5 in culture caused an increase in cytochromes P-450 and P-448, respectively, only in hepatocytes cultured on collagen membranes and confluent fibroblasts. Analogous results were seen for the enzyme NADPH-cytochrome C reductase. The similarities in performance between hepatocytes on collagen membranes and on human fibroblasts show that a continuous collagen-containing substratum is important for optimal performance of hepatocytes in primary culture. The possible importance of cultures of hepatocytes on human fibroblasts for carcinogenesis studies is discussed.     

Role of alpha1beta1-integrin in arterial stiffness and angiotensin-induced arterial wall hypertrophy in mice

We examined the arterial phenotype of mice lacking alpha(1)-integrin (alpha(1)(-/-)) at baseline and after 4 wk of ANG II or norepinephrine (NE) administration. Arterial mechanical properties were determined in the carotid artery (CA). Integrin expression, MAPK kinases, and focal adhesion kinase (FAK) were assessed in the aorta. No change in arterial pressure was observed in alpha(1)(-/-) mice. Elastic modulus-wall stress curves were similar in alpha(1)(-/-) and alpha(1)(+/+) animals, indicating no change in arterial stiffness. The rupture pressure was lower in alpha(1)(-/-) mice, demonstrating decreased mechanical strength. Lack of alpha(1)-integrin was accompanied by an increase in beta(1)-, alpha(v)-, and alpha(5)-integrins but no change in alpha(2)-integrin. ANG II increased medial cross-sectional area of the CA in alpha(1)(+/+), but not alpha(1)(-/-), mice, whereas equivalent pressor doses of NE did not produce a significant increase in either group. In alpha(1)(+/+) mice, ANG II induced alpha(1)-integrin expression and smooth muscle cell (SMC) hypertrophy in the CA in association with increased aortic expression of alpha-smooth muscle actin and smooth muscle myosin heavy chain and phosphorylation of ERK1/2, p38 MAPK, and FAK. ANG II did not induce SMC hypertrophy or phosphorylation of p38 MAPK and FAK in alpha(1)(-/-) mice. A functional anti-alpha(1)-integrin antibody inhibited in vitro the ANG II-induced phosphorylation of FAK and p38 MAPK. In conclusion, alpha(1)(-/-) mice exhibit a reduced mechanical strength at baseline and a lack of ANG II-induced SMC hypertrophy. These results emphasize the importance of alpha(1)beta(1)-integrin in p38 MAPK and FAK phosphorylation during vascular hypertrophy in response to ANG II.     

Primary cultures of hepatocytes on human fibroblasts.

Parenchymal hepatocytes isolated from adult rats were cultured on three types of collagen-containing substrata: collagen-coated plates, collagen membranes and confluent diploid human fibroblasts. Hepatocytes on the latter two substrata maintained characteristic morphology for at least 10 days in culture, whereas degenerative changes (cell death and formation of multinucleated hepatocytes) and growth of nonparenchymal elements were seen after 5 days in cultures on collagen-coated plates. Parallel findings were seen on basal and induced levels of cytochrome P-450 and NADPH-cytochrome C reductase. The basal levels of cytochrome P-450 were not measurable after day 3 in hepatocytes cultured on collagen-coated plates, whereas measurable levels were maintained in the hepatocytes cultured on the other two substrata. Addition of phenobarbital or methylcholanthrene at day 5 in culture caused an increase in cytochromes P-450 and P-448, respectively, only in hepatocytes cultured on collagen membranes and confluent fibroblasts. Analogous results were seen for the enzyme NADPH-cytochrome C reductase. The similarities in performance between hepatocytes on collagen membranes and on human fibroblasts show that a continuous collagen-containing substratum is important for optimal performance of hepatocytes in primary culture. The possible importance of cultures of hepatocytes on human fibroblasts for carcinogenesis studies is discussed.     

Simulated microgravity culture system for a 3-D carcinoma tissue model

An in vitro organotypic culture model is needed to understand the complexities of carcinoma tissue consisting of carcinoma cells, stromal cells, and extracellular matrices. We developed a new in vitro model of carcinoma tissue using a rotary cell culture system with four disposable vessels (RCCS-4D) that provides a simulated microgravity condition. Solid collagen gels containing human pancreatic carcinoma NOR-P1 cells and fibroblasts or minced human pancreatic carcinoma tissue were cultured under a simulated microgravity condition or a static Ig condition for seven days. NOR-P1 cultures subjected to the simulated microgravity condition showed greater numbers of mitotic, cycling (Ki-67-positive), nuclear factor-kappa B-activating cells, and a lower number of apoptotic cells than were shown by cultures subjected to the static Ig condition. In addition, human pancreatic carcinoma specimens cultured under the simulated microgravity condition maintained the heterogeneous composition and cellular activity (determined by the cycling cell ratio and mitotic index) of the original carcinoma tissue better than static culture conditions. This new 3-D rotary cell culture system with four disposal vessels may be useful for in vitro studies of complex pancreatic carcinoma tissue.     

Real-time monitoring approach: assessment of effects of antibodies on the adhesion of NCI-H460 cancer cells to the extracellular matrix

This paper presents an in situ impedance chip system, which allows studying the effects of drugs on the behaviors of living cell in real-time. A new label-free measurement approach is introduced, which enables to assess the extent of the adhesion of a cell population to the extracellular matrix (ECM)-coated microelectrode array, by adding together all the impedance changes from individually controlled microelectrodes. A high sensitivity was demonstrated and allowed us to monitor cell attachment with the resolution of a "few cells". The dose and pre-incubation time effects of antibodies against beta1-integrin and its subunit alpha2beta1-integrin on the adhesion behavior of NCI-H460 lung cancer cells to collagen type I was extensively studied. Results show that both anti-beta1-integrin and anti-alpha2beta1-integrin inhibit NCI-H460 cells attachment to collagen I. This indicates that beta1-integrin is present on the surface of NCI-H460 cancer cells, and that its subunit alpha2beta1 significantly affects NCI-H460 cells attachment on collagen I.     

Integrin expression and adhesion property of osteoclast-like cells from giant cell tumours of bone.

Cells cultured from human giant cell tumours of bone were used to study interactions with different extracellular matrix proteins as Collagen, Fibronectin, Osteocalcin, Thrombospondin and Bone Sialoprotein II. Cells were capable of recognizing these substrata; beta 3 integrin subunit was distributed in focal adhesions, together with beta 1 on BSPII, FN, and in presence of serum, whereas and presented a diffuse organization onto the other substrate. beta 1 alone was expressed over collagen coated coverslips.     

Modulation of cell attachment and collagen production of anterior cruciate ligament cells via submicron grooves/ridges structures with different cell affinity

This study aimed to investigate the effects of submicron‐grooved topography and surface cell affinity on the attachment, proliferation and collagen synthesis of anterior cruciate ligament (ACL) cells. Two grooved polystyrene (PS) surfaces (equal groove/ridge width of 800 nm) with a groove depth of 100 or 700 nm were fabricated and modified by oxygen plasma treatment, dopamine deposition and conjugation of RGD‐containing peptides to enhance cell affinity. The elongation and alignment of ACL cells was enhanced by grooved structures with increasing groove depths regardless of surface chemistry. On the other hand, cell spreading and proliferation mainly depended on surface chemistry, in accordance with surface cell affinity: O₂ plasma < dopamine deposition < RGD conjugation. The synthesis of type I collagen was the highest by the ACL cells cultured on the 700 nm grooved surface conjugated with RGD peptides, indicating that both surface grooved topography and chemistry play a role in modulating collagen production of ACL cells. Furthermore, the type I collagen deposited on the 700 nm PS surface was aligned with grooves/ridges. Our results indicated that both ligand presentation and cell alignment are important in the physiological activities of ACL fibroblasts. Such information is critical for design of biomaterials for ACL tissue engineering. Biotechnol. Bioeng. 2013; 110: 327–337. © 2012 Wiley Periodicals, Inc.     

Design and construction of a uniaxial cell stretcher

In vitro mechanical cell stimulators are used for the study of the effect of mechanical stimulation on anchorage-dependent cells. We developed a new mechanical cell stimulator, which uses stepper motor technology and computer control to achieve a high degree of accuracy and repeatability. This device also uses high-performance plastic components that have been shown to be noncytotoxic, dimensionally stable, and resistant to chemical degradation from common culture laboratory chemicals. We show that treatment with glow discharge for 25 s at 20 mA is sufficient to modify the surface of the rubber to allow proper adhesion for polymerization of aligned collagen. We show through finite element analysis that the middle area of the membrane, away from the clamped ends, is predictable, homogeneous, and has negligible shear strain. To test the efficacy of the mechanical stretch, we examined the effect of mechanical stimulation on the production of beta(1)-integrin by neonatal rat cardiac fibroblasts. Mechanical stimulation was tested in the range of 0-12% stretch and 0-10-cycles/min stretch frequency. The fibroblasts respond with an increase in beta(1)-integrin at 3% stretch and a decrease at 6 and 12% stretch. Stretch frequency was found to not significantly effect the concentration of beta(1)-integrin. These studies yield a new and improved mechanical cell stimulator and demonstrate that mechanical stimulation has an effect on the expression of beta(1)-integrin.     

Modification of collagen by 3-deoxyglucosone alters wound healing through differential regulation of p38 MAP kinase

Background

Wound healing is a highly dynamic process that requires signaling from the extracellular matrix to the fibroblasts for migration and proliferation, and closure of the wound. This rate of wound closure is impaired in diabetes, which may be due to the increased levels of the precursor for advanced glycation end products, 3-deoxyglucosone (3DG). Previous studies suggest a differential role for p38 mitogen-activated kinase (MAPK) during wound healing; whereby, p38 MAPK acts as a growth kinase during normal wound healing, but acts as a stress kinase during diabetic wound repair. Therefore, we investigated the signaling cross-talk by which p38 MAPK mediates wound healing in fibroblasts cultured on native collagen and 3DG-collagen.

Methodology/Principal Findings

Using human dermal fibroblasts cultured on 3DG-collagen as a model of diabetic wounds, we demonstrated that p38 MAPK can promote either cell growth or cell death, and this was dependent on the activation of AKT and ERK1/2. Wound closure on native collagen was dependent on p38 MAPK phosphorylation of AKT and ERK1/2. Furthermore, proliferation and collagen production in fibroblasts cultured on native collagen was dependent on p38 MAPK regulation of AKT and ERK1/2. In contrast, 3DG-collagen decreased fibroblast migration, proliferation, and collagen expression through ERK1/2 and AKT downregulation via p38 MAPK.

Conclusions/Significance

Taken together, the present study shows that p38 MAPK is a key signaling molecule that plays a significantly opposite role during times of cellular growth and cellular stress, which may account for the differing rates of wound closure seen in diabetic populations.