The Tunability of Surface Plasmon Polaritons in Graphene Waveguide Structures

The tunability of propagation properties of surface plasmon polariton (SPP) modes in a waveguide formed by two parallel graphene layers separated by a dielectric layer is studied. For this purpose, the dispersion equation of the structure is numerically solved and the effects of applied bias voltage, the role of effective structural parameters, and electron–phonon scattering rate on the propagation of symmetric and antisymmetric SPP waves are investigated. The results of calculations show that considering the electron–phonon scattering rate as a function of Fermi energy and temperature leads to a considerable decrease in the propagation length of SPPs. As the main result of this work, tuning the propagation characteristics of SPPs is possible by varying any of the parameters such as applied voltage, thickness of insulating layer between two graphene layers and permittivities of dielectric layers, and finally the temperature. It is found that antisymmetric mode benefits from a larger propagation length in comparison with that of the symmetric mode.

     

The influence of the molecular structure of lipid membranes on the electric field distribution and energy absorption

We consider the influence of the molecular structure of phospholipid membranes on their dielectric properties in the radio frequency range. Membranes have a stratified dielectric structure on the submolecular level, with the lipid chains forming a central hydrophobic layer enclosed by the polar headgroups (HGs) and bound water layers. In our numerical model, isotropic permittivities of 2.2 and 48.8 were assigned to the lipid chain and bound water layers, respectively. The HG region was assumed to possess an anisotropic static permittivity with 142.2 and 30.2 in the tangential and normal directions, respectively. The permittivities of the HG and bound water regions have been assumed to disperse at frequencies around 51 and 345 MHz to become 2.2 and 1.8, respectively, in both the normal and tangential directions. Electric field distribution and absorption were calculated for phospholipid vesicles with 75 nm radius as an example. Significant absorption has been obtained in the HG and bound water regions. Averaging the membrane absorption over the layers resulted in a decreased absorption below 1 GHz but a more than 10-fold increase above 1 GHz, compared to a model with a homogeneous membrane of averaged properties. We propose single particle dielectric spectroscopy by AC electrokinetics at low-bulk medium conductivities for an experimental verification of our model.     

Particle-in-cell simulation of multipactor discharge on a dielectric in a parallel-plate waveguide

An original 2D3V (two-dimensional in coordinate space and three-dimensional in velocity space) particle-in-cell code has been developed for simulation of multipactor discharge on a dielectric in a parallelplate metal waveguide with allowance for secondary electron emission (SEE) from the dielectric surface and waveguide walls, finite temperature of secondary electrons, electron space charge, and elastic and inelastic scattering of electrons from the dielectric and metal surfaces. The code allows one to simulate all stages of the multipactor discharge, from the onset of the electron avalanche to saturation. It is shown that the threshold for the excitation of a single-surface multipactor on a dielectric placed in a low-profile waveguide with absorbing walls increases as compared to that in the case of an unbounded dielectric surface due to escape of electrons onto the waveguide walls. It is found that, depending on the microwave field amplitude and the SEE characteristics of the waveguide walls, the multipactor may operate in two modes. In the first mode, which takes place at relatively low microwave amplitudes, a single-surface multipactor develops only on the dielectric, the surface of which acquires a positively potential with respect to the waveguide walls. In the second mode, which occurs at sufficiently high microwave intensities, a single-surface multipactor on the dielectric and a two-surface multipactor between the waveguide walls operate simultaneously. In this case, both the dielectric surface and the interwall space acquire a negative potential. It is shown that electron scattering from the dielectric surface and waveguide walls results in the appearance of high-energy tails in the electron distribution function.     

Electro-absorption Modulator with Dual Carrier Accumulation Layers Based on Epsilon-Near-Zero ITO

An electro-absorption modulator based on indium tin oxide is proposed by constructing a waveguide consisting of metal-dielectric-ITO-dielectric-Si stack. Applying a negative voltage bias on the ITO layer, carrier accumulation occurs at both dielectric-ITO interfaces, which dramatically changes the guided mode properties due to the epsilon-near-zero effect. By tuning the real part of the permittivity around zero, the guided plasmonic mode concentrates in either ITO or dielectric layers, resulting in a high propagation loss. These dual carrier accumulation layers significantly improve the extinction ratio of the modulator. A further improvement is obtained by using high refractive index dielectric thin layers, which provides a strong optical confinement in the carrier accumulation layers. The dual carrier accumulation layer device shows a 200 % increase of the modulation efficiency compared to a single accumulation layer design. A modulation depth of 9.9 dB/μm can be achieved by numerical simulation.     

Wall plasma in a wideband dielectric cherenkov maser

Results are reported of experimental investigations that have revealed the presence of a plasma in the interaction region of a model wideband relativistic microwave amplifier—a dielectric Cherenkov maser. The electrodynamic properties of a hybrid system—a waveguide with an annular dielectric liner and a plasma layer adjacent to its inner wall—are analyzed. Experiments with a high-current accelerator have revealed that the power of the emitted microwaves at the output of the system increases strongly when an external microwave source at different frequencies in the X-band is switched on. However, this effect was found to be hard to reproduce. Indirect evidence is obtained of the fact that, during the transport of an electron beam and under the action of the signal from a high-power pulsed magnetron, the plasma in the system is created at the surface of the dielectric. In the model of a cold magnetized plasma, a dispersion relation is derived for axisymmetric waves in a system with a wall plasma layer. The spectra of the waveguide and plasma modes in the system and the transverse structure of their electromagnetic fields are investigated thoroughly as functions of the plasma density and layer thickness. It is shown that even a very thin layer of a high-density plasma results in a large frequency shift of the dispersion curve of the waveguide mode, in which case the coupling impedance at a fixed frequency decreases sharply. On the other hand, a layer of a moderately dense plasma increases the coupling impedance for the waveguide mode. It is established that, in a configuration with a wall plasma layer, the longitudinal component of the electric field of a plasma mode whose power flux in the dielectric is of a volumetric nature reverses direction across the layer.     

Azimuthally asymmetric eigenmodes of a magnetized plasma cylinder around a dielectric rod in a circular waveguide

The electrodynamics of a circular waveguide with a dielectric rod surrounded by a magnetized plasma layer is considered. A general dispersion relation for azimuthally asymmetric perturbations is derived, and its solutions describing slow waves—specifically, electromagnetic and plasma modes, as well as (and primarily) hybrid waves that combine the properties of both mode types—are investigated numerically. For the fundamental waveguide mode of the system—the HE₁₁ mode—the parameters of the plasma layer are determined at which the mode cannot be subject to Cherenkov interaction with a relativistic electron beam at a given frequency. For both waveguide and plasma modes, the radial profiles of the longitudinal components of the electric field and Poynting vector, the fractions of RF power carried within the dielectric and plasma regions and vacuum gap, and the coupling impedance are calculated as functions of the parameters of the plasma layer. The evolution of the field structure during the formation of asymmetric hybrid waves is traced. The results of calculating the dispersion and coupling impedance are analyzed as applied to an antenna-amplifier—a relativistic traveling-wave tube operating on the HE₁₁ mode of the dielectric rod: specifically, the implementability of the concept in the presence of a plasma at the rod surface is estimated, and the possible role of azimuthally asymmetric and symmetric plasma modes is examined.     

Characterisation of baseline oscillation in congenital nystagmus eye movement recordings

Congenital nystagmus is an ocular–motor disorder that develops in the first few months of life; its pathogenesis is still unknown. Patients affected by congenital nystagmus show continuous, involuntary, rhythmical oscillations of the eyes. Monitoring eye movements, nystagmus main features such as shape, amplitude and frequency, can be extracted and analysed. Previous studies highlighted, in some cases, a much slower and smaller oscillation, which appears added up to the ordinary nystagmus waveform. This sort of baseline oscillation, or slow nystagmus, hinder precise cycle-to-cycle image placement onto the fovea. Such variability of the position may reduce patient visual acuity. This study aims to analyse more extensively eye movements recording including the baseline oscillation and investigate possible relationships between these slow oscillations and nystagmus. Almost 100 eye movement recordings (either infrared-oculographic or electrooculographic), relative to different gaze positions, belonging to 32 congenital nystagmus patients were analysed. The baseline oscillation was assumed sinusoidal; its amplitude and frequency were computed and compared with those of the nystagmus by means of a linear regression analysis. The results showed that baseline oscillations were characterised by an average frequency of 0.36 Hz (SD 0.11 Hz) and an average amplitude of 2.1° (SD 1.6°). It also resulted in a considerable correlation (R² scored 0.78) between nystagmus amplitude and baseline oscillation amplitude; the latter, on average, resulted to be about one-half of the correspondent nystagmus amplitude.     

Influence of the shape of the cross section of a plasma-dielectric interface on the dispersion properties of high-frequency azimuthal surface modes

Theoretical study of the propagation of a packet of surface electromagnetic surface waves with a zero axial wavenumber in a circular-cross-section cylindrical metal waveguide within the frequency range that is higher than upper hybrid resonance is carried out. The waveguide is partially filled by plasma and immersed into axial magnetic field. The cross section of the plasma column is assumed to differ from circular shape. The effect of this shape on the dispersion properties of azimuthal surface modes is investigated by the method of successive approximations. The fields of the waves and their eigenfrequencies are determined up to terms of the second order in the deviation of the plasma cross section shape from the ring one. The correction to the eigenfrequency of azimuthal surface modes caused by this feature of the plasma column section is proved to increase with decreasing the external magnetic field and increasing the value of the dielectric constant of the dielectric, that separates the plasma from the metal wall of the waveguide. The spectral composition of the wave packet, in the form of which these modes propagate, is studied. The amplitudes of the satellite harmonics of these modes are found to increase with increasing the plasma density and decreasing the external magnetic field.     

Compact Color Filter and Polarizer of Bilayer Metallic Nanowire Grating Based on Surface Plasmon Resonances

Surface plasmon resonances on bilayer aluminum nanowire gratings are studied in both theory and experiment. It is found that there are two kinds of surface plasmon on the bilayer metallic gating: longitudinal aluminum/dielectric/aluminum slit and lateral aluminum/dielectric interface waveguide mode. The surface plasmon waveguide mode resonance in the slits makes the grating act as a transverse magnetic (TM)-passing polarizer. With the lateral waveguide mode resonance, certain wavelengths of the incident TM light are translated to aluminum/air or aluminum/substrate waveguide light, and the grating acts as a color filter. With both resonances, the bilayer nanowire grating can be a compact-integrated polarizer and color filter.     

Surface Plasmon Resonance Intensification by Cavity-Ring Plasma Structure in the Giga-Hertz Regime

In this paper, we propose a novel sub-wavelength plasma structure that can effectively enhance surface plasmon resonance (SPR) to achieve a significant local field. On the basis of a plasma ring structure, we add a slit and two thin plasma layers, working as a metal-insulator-metal (MIM) waveguide at a specific incident wave frequency and generate the Fabry-Perot resonance (FPR). The structure thus couples the incident wave energy to the vicinity of the slit and intensifies the SPR inside the plasma ring. In addition, we also find the coupling and competing between SPR and FPR. For the coupling mode, the average field enhancement in the ring is up to a factor of 9.7. Moreover, the optimized thickness of the plasma layer is much thinner than the skin depth of the plasma to ensure the incident wave easily entering the MIM waveguide. We further calculate the dispersion relationship of surface plasmon polaritons in the waveguide cavity. The simulation results and theoretical dispersion function are in good agreements.

     

Study of Design Tunable Optical Sensor and Monochromatic Filter of the One-Dimensional Periodic Structure of TiO2/MgF2 with Defect Layer of Liquid Crystal (LC) Sandwiched with Two Silver Layers

In this paper, we have inspected the optical characteristics of one-dimensional periodic structure (1DPS) of TiO₂ and MgF₂ dielectric materials with defect layer of liquid crystal (LC) sandwiched with two silver layers, i.e., (TiO₂|MgF₂)³|Ag|LC|Ag|(TiO₂/MgF₂)³ using transfer matrix method (TMM). The optical tunable properties of considered periodic structures investigated at different incident angles and temperatures for TE and TM modes. Our study shows that absorption peak of 1DPS varies with incident angle and temperature. The defect layer (Ag-LC-Ag), sandwiched LC within two metallic (Ag) layers, exhibits the surface plasmon waves at the metal LC interfaces. The effect of surface plasmon waves can be better understand through the optical sensing property of such defect periodic structure. The detailed study concludes that such a type of one-dimensional periodic structure (1DPS) may be useful to design a tunable sensor and monochromatic filter.

     

Plasma-Assisted Deposition of Au/SiO2 Multi-layers as Surface Plasmon Resonance-Based Red-Colored Coatings

In this work, the expanding thermal plasma chemical vapor deposition in combination with radio frequency magnetron sputtering is used to deposit dielectric/metal multi-layers with controlled size and density of nanoparticles. The multi-layer structure serves the purpose of increasing the nanoparticle number density, without changing the metal particle size, shape and the interparticle distance. The possibility of independently tuning and, therefore, controlling the nanoparticle size and number density allows developing surface plasmon resonance-based deep-colored coatings. The influence of the number of layers, metal surface area coverage, and thickness of the dielectric layer on the multi-layer nanostructure and on the developed color is presented here in detail. The nanoparticle size and distribution have been measured by transmission electron microscopy. Rutherford back-scattering and infra-red transmission spectroscopy have been used to determine the metal surface coverage and the film chemistry, respectively. Optical properties of the nano-composite layers have been investigated by UV-VIS spectroscopy and exhibit an increase in amplitude of the plasmon absorption spectra at a fixed plasmon resonance frequency with an increase in the number of layers.     

Light transmission through blood in oscillatory flow

Measurements were made of the intensity of light transmitted through various thicknesses of normal human blood confined between two parallel plane surfaces, one fixed and the other oscillating in its own plane. When the light propagation direction is perpendicular to the direction of shear flow the transmitted intensity contains a steady component and a dominant second harmonic of the oscillation frequency. For a thin layer of blood, the steady intensity is a minimum value when the oscillation amplitude produces unit strain. The second harmonic is very small at small strains, but increases rapidly near unit strain where it is approximately in phase with the strain. For thicker layers, the effects of viscoelastic shear waves reduce the size of the second harmonic and modify its phase. Changes in light transmission are interpreted by relating the optical density of the blood to the total amount of contact between red cells. In oscillatory flow at low strains (less than 1) cell-to-cell contact is reduced by disaggregation of cell groups, and light transmission decreases. Near unit strain, disaggregation becomes complete, cell alignment occurs, and light transmission is minimized. At higher strains cell-to-cell contact is increased by formation of aligned layers of compacted cells separated by parallel plasma layers, and light transmission increases.     

Coordination modes in the multisegmental dynamics of hula hooping

In hula hooping, organized motions of the body keep the hoop in stable oscillatory motion parallel to the ground. We examined the hypothesis that the multiple degrees of freedom (DF) of the lower limbs in producing the oscillations are resolved into a few control DF. The Karhunen-Loève decomposition was applied to the kinematics of the lower limbs in three experiments in which oscillation amplitude and frequency were manipulated. Kinematic variance was accommodated by two modes whose relative contributions varied with task parameters. Complementary analyses of interjoint Hilbert relative phase suggested a lower-limb organization into a vertical suspension mode and an oscillatory fore-aft mode. These modes might stabilize the hoops angular momentum by controlling, respectively, its vertical and horizontal components.     

Kelvin-Helmholtz instability on the magnetopause, magnetohydrodynamic waveguide in the outer magnetosphere, and Alfvén resonance deep in the magnetosphere

Oscillations of the “magnetosphere-solar wind” system are studied analytically in the framework of a plane-stratified model of the medium. The properties of oscillations are determined by three phenomena: Kelvin-Helmholtz instability on the tangential discontinuity (magnetopause) separating the magnetosphere and the solar wind, the presence of a waveguide for fast magnetosonic waves in the magnetosphere, and the Alfvén resonance—a sharp increase in the amplitude of oscillations having the properties of Alfvén waves—in the inner magnetosphere. The oscillations of the system form a discrete spectrum of eigenmodes. Analytical expressions are obtained for the frequency and growth rate of instability of each mode, as well as for the functions describing the spatial structure of these modes. All these characteristics of the eigenmodes are shown to depend on the velocity of the solar wind as a parameter. The dependences of the main mode characteristics (such as the instability thresholds, the points of the maximum and minimum growth rate, and the spatial distributions of the oscillation energy) on this parameter are determined for each eigenmode.     

Reversed Hyperbolic Plasmonic Responses in Phosphorene Under Uniaxial Strain

In this paper, hyperbolic plasmonic responses of phosphorene under uniaxial strains have been explored within density functional theory. In the hyperbolic regime, plasmonic slab waveguide modes are found only along armchair direction. Then, uniaxial strains up to 10% have been applied along zigzag and armchair directions, which can significantly modify its plasmonic responses. Under appropriate strain, the signs of permittivities along two in-plane directions can be even reversed, causing switching of the propagating direction of the plasmonic modes into zigzag direction. Our investigations may give a general idea about how to control the hyperbolic plasmonic modes in phosphorene via strain.

     

Ultra-Uniform Field Distribution in a Finite-Width Metal–Dielectric–Metal Waveguide

We investigate the propagation characteristics of the fundamental surface plasmon polariton (SPP) mode of a finite-width metal–dielectric–metal waveguide. By changing the refractive index or the thickness of the dielectric layer of the waveguide, the SPP mode can be transformed from a mode confined in the dielectric layer into a mode confined around the metal corners. There always exists a condition at which the mode field distribution in the dielectric layer becomes almost perfectly uniform along the direction parallel to the metal layers, and this condition is insensitive to the width of the waveguide. It is also possible to obtain an ultra-uniform field distribution by controlling the refractive index of a different dielectric placed on both sides of the waveguide. The waveguide can be used as a basic structure for the realization of nanosized photonic devices and sensors.     

Magnetic Coupling Effect on Nonlinear Properties in Negative Index Metamaterials with a Kerr Nonlinearity

We investigate magnetic coupling effect on nonlinear electromagnetic properties in a three-dimensional negative index metamaterial constituted by arrays of conducting wires and split-ring resonators embedded into a Kerr nonlinear dielectric. Numerical results show that the switches of nonlinear electromagnetic properties between right-handed and left-handed properties depend closely on magnetic coupling strength, which can be divided into several different coupling regions according to the angular frequency of incident light and the nonlinear types (focused or defocused) of the dielectric. These properties may be instructive for designing optimizely composite metamaterials with negative refraction and provide various routes to manipulating light.     

固态发酵的参数周期变化及对微生物发酵的影响

研究了压力脉动固态发酵反应器内环境参数的周期性变化以及这些周期性的环境刺激对于固态培养的斜卧青霉发酵的影响。研究结果显示:在这种反应器中,在空气压力脉动的带动下,反应器内的温度和空气湿度也会发生较大幅度的周期性变化,变化的周期和空气压力脉动的周期相同,变化的幅度随着压力脉动的幅度增大而增加;在外界周期刺激的条件下,较未加外界周期刺激斜卧青霉的生物量增加了104% ,二氧化碳的产生总量增加了229%和纤维素酶的产量增加了320 % ,数据显示外界周期刺激不仅增加了菌体的生物量同时增加了其代谢活性。     

An Ultra-Wideband Terahertz Metamaterial Absorber Utilizing Sinusoidal-Patterned Dielectric Loaded Graphene

In this paper, a non-structured graphene sheet loaded with a sinusoidal-patterned dielectric is introduced as an ultra-wideband metamaterial absorber in terahertz regime. Regardless of conventional structures with multilayered-graphene, a single layer sheet of non-structured graphene is used whereas the proposed structure benefits from dielectric width modulation and cavity method in order to excite continuous graphene plasmon resonances. The structure comprises four layers that two Fabry-Perot cavity mirrors are constructed by upper sinusoidal-patterned dielectric and a gold film. Full wave simulation results demonstrate that a broadband over 90% absorption with absolute bandwidth of 6.58 THz and central frequency of 3.97 THz is achieved under normal TE/TM incident plane wave. The designed structure yields 166% relative bandwidth. According to the symmetric configuration, the absorption spectra of mentioned polarizations are thoroughly close to each other resulting to a polarization insensitive structure. The stability of bandwidth and absorbance of the structure versus angle of incidence, θ, up to 35°/65° for TM/TE polarizations, respectively, and azimuth angle, φ, shows an interesting capability for utilization as detectors and sensors. The simple geometry of utilized graphene layer results in easy fabrication. The designed structure has wideband absorption in THz regime. Moreover, it is more compact than conventional broadband THz absorbers.