共查询到20条相似文献,搜索用时 31 毫秒
1.
The design and application of soft nanocomposite injectable hydrogels containing entrapped microgels for small-molecule drug delivery is demonstrated. Copolymer microgels based on N-isopropylacrylamide and acrylic acid were synthesized that exhibited both ionic and hydrophobic affinity for binding to bupivacaine, a cationic local anesthetic used as a model drug. Microgels were subsequently immobilized within an in situ-gelling hydrogel network cross-linked via hydrazide-aldehyde chemistry to generate hydrogel-microgel soft nanocomposites. Drug release could be sustained for up to 60 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or microgels alone (<1 week). Drug release kinetics could be readily tuned by varying the affinity of the microgel and hydrogel phases for drug-polymer interactions and the network density of the hydrogel phase. 相似文献
2.
Two types of thermoresponsive microgels, poly(N-isopropylacrylamide) (PNIPAM) microgels and poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAMAC) microgels were synthesized and used as templates for the mineralization of amorphous calcium carbonate (ACC) by diffusion of CO(2) vapor under ambient conditions. Thermosensitive PNIPAM/CaCO(3) hybrid macroscopic hydrogels and micrometer-sized PNIPAMAC/CaCO(3) hybrid microgels were controllably obtained and different mineralization mechanistic processes were proposed. The impact of the loaded CaCO(3) on the size, morphology, stability, and thermosensitivity of the microgels was also analyzed. PNIPAM/CaCO(3) hybrid macrogels had a slight decrease in thermoresponsive phase transition temperature, while PNIPAMAC/CaCO(3) hybrid microgels showed a clear increase in phase transition temperature. The difference reflected different amount and location of ACC in the gel network, causing different interactions with polymer chains. The PNIPAMAC/CaCO(3) microgels formed stable monolayer films on bare silica wafers and glass coverslips upon drying. The microgel films could facilitate the attachment and growth of 3T3 fibroblast cells and their subsequent detachment upon temperature drop from 37 °C to the ambient condition around 20 °C, thus, offering a convenient procedure for cell harvesting. 相似文献
3.
V. G. Bogush L. I. Davydova M. M. Moisenovich K. V. Sidoruk A. Yu. Arkhipova D. G. Kozlov I. I. Agapov M. P. Kirpichnikov V. G. Debabov 《Applied Biochemistry and Microbiology》2014,50(8):780-788
Gels, microgels, and matrices were prepared based on a previously developed recombinant spidroin, 1F9, produced by Saccharomyces cerevisiae yeast strain; their physical, chemical, and biological properties were investigated. It was shown that microgels obtained from 2.5% hydrogel are sized in the range of 50–300 μm, with a predominance of particles of 50–150 μm in diameter. The microgel particles were stable in neutral, acidic, and alkaline media; the destruction of 50% (wt.) of the particles occurred in corrosive media (Fenton’s reagent) within three weeks. The microgel surface, which was studied by laser scanning confocal microscopy and scanning electron microscopy, has a complex relief in which there are both nano-(250–400 nm) and microstructures (3–7 μm). It was shown that particles of both microgel and matrices are capable of adhesion and support the proliferation of 3T3 murine fibroblasts in vitro. 相似文献
4.
Charge-switching, amphoteric glucose-responsive microgels with physiological swelling activity 总被引:1,自引:0,他引:1
Amphoteric, poly(N-isopropylacrylamide)-based microgels are functionalized with aminophenylboronic acid (PBA) functional groups to produce colloidally stable, glucose-responsive gel nanoparticles that exhibit glucose-dependent swelling responses at physiological temperature, pH, and ionic strength. Up to 2-fold volumetric swelling responses are observed in response to physiological glucose concentrations, the first such physiological response reported for a colloidally stable microgel. Amphoteric microgels can also be designed to both swell and deswell in response to glucose according to the pH of the medium, the concentration of PBA groups grafted to the microgel, and the relative concentrations of the cationic and anionic functional groups in the platform microgel. The increasing anionic charge density on the microgels observed at higher glucose binding fractions can be applied to switch the net charge of the microgels from cationic to anionic as the glucose concentration increases. Preliminary experiments suggest that such amphoteric PBA-microgels have a high capacity for insulin uptake and can selectively release more insulin at higher glucose concentrations under physiological conditions via glucose-induced, "on-off" switching of electrostatic attractions between insulin and the microgel. 相似文献
5.
The use of injectable pH-responsive doubly cross-linked microgels (DX microgels) to improve the mechanical properties of degenerated intervertebral discs is demonstrated for the first time. The microgel comprised methyl methacrylate (MMA), methacrylic acid (MAA), ethyleneglycol dimethacrylate (EGD) and glycidyl methacrylate (GM) and was poly(MMA/MAA/EGD)-GM. The GM facilitated covalent interparticle cross-linking. The DX microgels are shown to have tunable mechanical properties. Degeneration of model bovine intervertebral discs (IVDs) was induced using collagenase. When injected into degenerated IVDs the DX microgels were shown to improve the strain, modulus, toughness and resilience. The extent of mechanical property improvement was an increasing function of DX microgel concentration, suggesting tunability. Cytotoxicity studies showed that the DX microgel was biocompatible under the conditions investigated. The results of this study imply that injectable DX microgels have good potential as a future regenerative medicine strategy for restoring the mechanical properties of degenerated load-bearing soft tissue, such as IVDs. 相似文献
6.
Poly(N-isopropylacrylamide) (PNIPA) microgels may offer several advantages over PNIPA-modified surfaces when used as sorbents in temperature-sensitive chromatography. Yet, a full exploitation of these advantages requires a better understanding of the mechanisms controlling the separation process. As a model system, we have studied the binding of three proteins (bovine serum albumin (BSA), ovalbumin, and lysozyme) to PNIPA microgels. Binding experiments were conducted both below (25 degrees C) and above (37 degrees C) the volume phase transition temperature of the gel, T(c). The analysis of the binding isotherms has shown that although an average gel particle contained a larger amount of protein below the phase transition temperature, the concentration of the protein within the particle was higher above this temperature. These findings were attributed to changes in the binding loci due to temperature swings around T(c): whereas a sorption mechanism is dominant below this temperature, surface-adsorption was more important above it. A comparison between the three studied proteins has shown that below T(c) the binding increases with a decrease in the molecular weight. On the other hand, no significant difference in the bound protein amounts was observed above the phase transition temperature. Our results imply that, despite the increase in the gel's hydrophobicity above the phase transition temperature, the resolution in bioseparations based on PNIPA gels is not necessarily better above T(c). 相似文献
7.
Gattás-Asfura KM Weisman E Andreopoulos FM Micic M Muller B Sirpal S Pham SM Leblanc RM 《Biomacromolecules》2005,6(3):1503-1509
Gelatin having p-nitrocinnamate pendant groups (Gel-NC) was prepared via an efficient one-pot synthesis, yield >87%. (1)H NMR data indicated that 1 mol of gelatin was modified with 18 +/- 6 mol of the photosensitive group. Upon exposure to low-intensity 365 nm UV light and in the absence of photoinitiators or catalysts, Gel-NC cross-linked within minutes into a gelatin-based hydrogel as monitored by UV-vis spectroscopy. The degree of swelling of this biodegradable hydrogel in aqueous solutions responded to changes in Gel-NC concentration levels, the ionic strength of the aqueous solutions, and photo-cross-linking time. Topography changes associated with phase transition resulting from "photocleavage" of the hydrogel network with 254 nm UV light were studied with AFM. Both Gel-NC and its hydrogel expressed low toxicity to human neonatal fibroblast cells. In addition, gelatin-based microgels were prepared via the photo-cross-linking of Gel-NC within inverse micelles. 相似文献
8.
Du Y Ghodousi M Qi H Haas N Xiao W Khademhosseini A 《Biotechnology and bioengineering》2011,108(7):1693-1703
Microscale technologies, such as microfluidic systems, provide powerful tools for building biomimetic vascular-like structures for tissue engineering or in vitro tissue models. Recently, modular approaches have emerged as attractive approaches in tissue engineering to achieve precisely controlled architectures by using microengineered components. Here, we sequentially assembled microengineered hydrogels (microgels) into hydrogel constructs with an embedded network of microchannels. Arrays of microgels with predefined internal microchannels were fabricated by photolithography and assembled into 3D tubular construct with multi-level interconnected lumens. In the current setting, the sequential assembly of microgels occurred in a biphasic reactor and was initiated by swiping a needle to generate physical forces and fluidic shear. We optimized the conditions for assembly and successfully perfused fluids through the interconnected constructs. The sequential assembly process does not significantly influence cell viability within the microgels indicating its promise as a biofabrication method. Finally, in an attempt to build a biomimetic 3D vasculature, we incorporated endothelial cells and smooth muscle cells into an assembled construct with a concentric microgel design. The sequential assembly is simple, rapid, cost-effective, and could be used for fabricating tissue constructs with biomimetic vasculature and other complex architectures. 相似文献
9.
The importance of peptide secondary structure on the interaction between antimicrobial peptides and oppositely charged poly(acrylic acid-co-acrylamide) microgels of various charge density was investigated for EFKRIVQRIKDFLRNLV (EFK17). Through D-enantiomer (EFK17-d/a; E(dF)KR(dI)VQR(dI)KD(dF)LRNLV) or tryptophan (EFK17-W/a; EWKRWVQRWKDFLRNLV) substitutions, both conformation-dependent and -independent amphiphilicity of this peptide could be precisely controlled. Peptide secondary structure was investigated by circular dichroism, whereas microgel deswelling and reswelling in response to peptide binding and release were studied by micromanipulator-assisted light and fluorescence microscopy, and peptide uptake in the microgels was determined from solution depletion measurements. Results show that peptide binding to the microgel is highly influenced by peptide secondary structure. EFK17-a, characterized by an idealized helix with all polar/charged amino acids located at one side of the helix, and all nonpolar/hydrophobic residues on the other, displays pronounced α-helix induction on peptide binding to the microgels. EFK17-d/a, on the other hand, displays no such amphiphilic helix induction. Mirroring this, EFK17-a displays substantially higher binding to the microgels than EFK17-d/a as well as much larger peptide-induced microgel deswelling. For EFK17-W/a, both conformation-dependent and -independent amphiphilicity effects were demonstrated. Overall, the results show that peptide conformational aspects need to be considered in peptide/microgel interactions, for example, in the design of microgel carrier systems for peptide drugs. 相似文献
10.
Yanan Du Majid Ghodousi Edward Lo Mahesh K. Vidula Onur Emiroglu Ali Khademhosseini 《Biotechnology and bioengineering》2010,105(3):655-662
Cell‐laden microscale hydrogels (microgels) can be used as tissue building blocks and assembled to create 3D tissue constructs with well‐defined microarchitecture. In this article, we present a bottom‐up approach to achieve microgel assembly on a patterned surface. Driven by surface tension, the hydrophilic microgels can be assembled into well‐defined shapes on a glass surface patterned with hydrophobic and hydrophilic regions. We found that the cuboidic microgels (~100–200 µm in width) could self‐assemble into defined shapes with high fidelity to the surface patterns. The microgel assembly process was improved by increasing the hydrophilicity of the microgels and reducing the surface tension of the surrounding solution. The assembled microgels were stabilized by a secondary crosslinking step. Assembled microgels containing cells stained with different dyes were fabricated to demonstrate the application of this approach for engineering microscale tissue constructs containing multiple cell types. This bottom‐up approach enables rapid fabrication of cell‐laden microgel assemblies with pre‐defined geometrical and biological features, which is easily scalable and can be potentially used in microscale tissue engineering applications. Biotechnol. Bioeng. 2010; 105: 655–662. © 2009 Wiley Periodicals, Inc. 相似文献
11.
The dispersion of microgels with two interpenetrating polymer networks of poly( N-isopropylacrylamide) and poly(acrylic acid) (PNIPAM-IPN-PAAc) has been studied for its viscoelastic behavior, biocompatibility, and in vivo release properties. The IPN microgels in water had an average hydrodynamic radius of about 85 nm at 21 degrees C, measured by dynamic light scattering method. The atomic force microscope image showed that the particles were much smaller after they were dried but remained spherical shape. The storage and loss moduli ( G' and G') of dispersions of IPN microgels were measured in the linear stress regime as functions of temperature and frequency at various polymer concentrations using a stress-controlled rheometer. For dispersions with polymer concentrations of 3.0 and 6.0 wt % above 33 degrees C, the samples behave as viscoelastic solids and the storage modulus was larger than the loss modulus over the entire frequency range. The loss tangent was measured at various frequencies as a function of temperature. The gelation temperature was determined to be 33 degrees C at the point where a frequency-independent value of the loss tangent was first observed. At pH 2.5, when heated above the gelation temperature, IPN microgels flocculate by pumping a large amount of water from the gel. When the pH value was adjusted to neutral, deprotonation of -COOH groups on PAAc made the microgel keep water even above the gelation temperature. Using an animal implantation model, the biocompatibility and drug release properties of the IPN microgel dispersion were evaluated. Fluorescein as a model drug was mixed into an aqueous microgel dispersion at ambient temperature. This drug-loaded liquid was then injected subcutaneously in Balb/C mice from Taconic Farms. The test results have shown that the IPN microgels did not adversely promote foreign body reactions in this acute implantation model and the presence of gelled microgel dispersion substantially slowed the release of fluorescein. 相似文献
12.
Bottom-up approach is a potentially useful tool for hydrogel assembly of cell-laden individual building blocks. In this article, we assembled individual building blocks of photocrosslinkable microgels in a rapid and controlled manner. Individual building blocks of poly(ethylene glycol) (PEG) microgels with square and hexagonal shapes were fabricated by using a photolithography technique. Individual building blocks of PEG microgels were assembled on a hydrophobic mineral oil phase in a bioreactor with a magnetic stirrer. The hydrophobic mineral oil minimized the surface free energy to assemble hydrophilic PEG microgels on a two-phase oil-aqueous solution interface. We used the hydrophobic effect as a driving force for the hydrogel assembly. Various types of the hydrogel assembly were generated by controlling the stirring rate. As stirring speed increased, the percentage of linear, branched, and closely packed hydrogel assembly was increased. However, the percentage of random assembly was reduced by increasing stirring rate. The stirring time also played an important role in controlling the types of hydrogel assembly. The percentage of linear, branched, and closely packed hydrogel assembly was improved by increasing stirring time. Therefore, we performed directed cell-laden hydrogel assembly using a two-phase bioreactor system and optimized the stirring rate and time to regulate the desired types of hydrogel assembly. Furthermore, we analyzed cell viability of hydrogel linear assembly with square shapes, showing highly viable even after secondary photocrosslinking reaction. This bioreactor system-based hydrogel assembly could be a potentially powerful approach for creating tissue microarchitectures in a three-dimensional manner. 相似文献
13.
De Geest BG Stubbe BG Jonas AM Van Thienen T Hinrichs WL Demeester J De Smedt SC 《Biomacromolecules》2006,7(1):373-379
Self-exploding microparticles show potential for advanced delivery of certain therapeutics. This study evaluates (1) whether degrading biodegradable dextran hydroxyethyl methacrylate (dex-HEMA) microgels can be coated by a lipid membrane and (2) whether the surrounding membrane can be ruptured by the increasing swelling pressure of the degrading microgel. We found that adsorption of charged liposomes to oppositely charged dex-HEMA microgels provides efficient coating of the microgels, whereby microparticles with a "core-shell" structure were clearly obtained. Especially, we could confirm experimentally that the swelling pressure increase of degrading dex-HEMA microgels can destroy the lipid membrane surrounding the microgels. 相似文献
14.
Hydrolysis of dipalmitoylphosphatidylcholine small unilamellar vesicles by porcine pancreatic phospholipase A2 总被引:4,自引:0,他引:4
M Menashe G Romero R L Biltonen D Lichtenberg 《The Journal of biological chemistry》1986,261(12):5328-5333
The hydrolysis of small unilamellar vesicles made of dipalmitoylphosphatidylcoline by pancreatic phospholipase A2 has been studied under various conditions of temperature and enzyme and substrate concentration using the following three different experimental protocols. When the enzyme was added to the substrate vesicles after being separately adjusted to the temperature of the experiments hydrolysis occurred instantaneously only in the temperature range where the lipid is known to exist in its gel phase, while above the transition range no hydrolysis occurred. Within the transition range, the time course of hydrolysis was characterized by initial very slow rate of hydrolysis (latency phase) followed by an abrupt increase in the rate after a time tau, which is a complex function of temperature and enzyme to substrate ratio. When an enzyme-substrate mixture was first preincubated below Tm and then temperature jumped to a temperature above or within the transition range, the latency phase was markedly shortened. When the temperature jump was to the transition range, this effect is observed even if Ca2+ is absent in the preincubation mixture. However, instantaneous hydrolysis was observed upon temperature jumping the mixture to a temperature high above Tm only if Ca2+ was present in the preincubation medium. In temperature-scanning experiments, hydrolysis was followed while changing the temperature of the enzyme-substrate mixture continuously. Heating an enzyme-substrate mixture from room temperature resulted in an abrupt onset of hydrolysis when the transition range was approached. These results lead us to conclude that two distinctly different steps precede rapid hydrolysis of dipalmitoylphosphatidylcholine small unilamellar vesicles by pancreatic phospholipase A2: a Ca2+-independent binding of the enzyme to the substrate vesicles, which for chemically pure bilayers occurs best in the gel phase. This step is followed by a Ca2+-dependent activation of the initially formed enzyme-substrate complex. The latter step only occurs under conditions where the bilayer possesses packing irregularities and probably involves a reorganization of the enzyme-substrate complex. At least one of these two steps appears to involve enzyme-enzyme interaction. 相似文献
15.
By the functionalization of poly(N-isopropylacrylamide-co-acrylic acid) microgels with 3-aminophenylboronic acid (APBA) via carbodiimide coupling, nearly monodisperse glucose-sensitive P(NIPAM-PBA) microgels with a diameter of several hundred nanometers were synthesized in aqueous media. Dynamic laser light scattering was used to study the glucose-sensitive and thermosensitive behaviors of the resultant microgels under various conditions. The introduction of the hydrophobic phenylboronic acid (PBA) group significantly decreases the volume phase transition temperature of the resultant microgels. As a result, the P(NIPAM-PBA) microgels with a 10.0 mol % PBA content are in a collapsed state at room temperature. However, the addition of glucose makes the microgels swell dramatically. The glucose-sensitivity of the PBA-containing microgels relies on the stabilization of the charged phenylborate ions by binding with glucose, which can convert more hydrophobic PBA groups to the hydrophilic phenylborate ions. The presence of glucose also induces a two-stage volume phase transition of the P(NIPAM-PBA) microgels, which is explained by the core-shell-like heterogeneous structure of the microgels induced by the formation of the unique glucose-bis(boronate) complex in the "core" area of the microgels. The effects of pH, ionic strength, and PBA content on the glucose sensitivity of the P(NIPAM-PBA) microgels were investigated. 相似文献
16.
Jia X Yeo Y Clifton RJ Jiao T Kohane DS Kobler JB Zeitels SM Langer R 《Biomacromolecules》2006,7(12):3336-3344
Vocal fold scarring disrupts the viscoelastic properties of the lamina propria that are critical for normal phonation. There is a clinical need for the development of advanced biomaterials that approximate the mechanical properties of the lamina propria for in vivo vocal fold regeneration. We have developed hyaluronic acid (HA)-based microgels and cross-linked microgel networks with tunable degradation and mechanical properties. HA microgels were prepared by cross-linking HA derivatives carrying hydrazide (HAADH) and aldehyde (HAALD) functionalities within the inverse emulsion droplets. Alternatively, poly(ethylene glycol) dialdehyde (PEGDiALD) was employed in place of HAALD. Microgels based on HAADH/HAALD are more resistant to enzymatic degradation than those generated from HAADH/PEGDiALD. In vitro cytotoxicity studies using vocal fold fibroblasts indicate that microgels synthesized from HAADH/HAALD are essentially nontoxic, whereas microgels derived from HAADH/PEGDiALD exhibit certain adverse effects on the cultured cells at high concentration (> or =2 mg/mL). These microgels exhibit residual functional groups that can be used as reactive handles for covalent conjugation of therapeutic molecules. The presence of residual functional groups also allows for subsequent cross-linking of the microgels with other reactive polymers, giving rise to doubly cross-linked networks (DXNs) with tunable viscoelasticity. Mechanical measurements using a torsional wave apparatus indicate that HA-based DXNs exhibit elastic moduli that are similar to those of vocal fold lamina propria at frequencies close to the range of human phonation. These HA-based microgel systems are promising candidates for the treatment of vocal fold scarring, not just as biocompatible filler materials, but as smart entities that can repair focal defects, smooth the vocal fold margin, and potentially soften and dissolve scar tissue. 相似文献
17.
Susan Thompson Jessica Stukel Abrar AlNiemi Rebecca Kuntz Willits 《Journal of visualized experiments : JoVE》2013,(82)
This work describes the formation of poly(ethylene glycol) (PEG) microgels via a photopolymerized precipitation reaction. Precipitation reactions offer several advantages over traditional microsphere fabrication techniques. Contrary to emulsion, suspension, and dispersion techniques, microgels formed by precipitation are of uniform shape and size, i.e. low polydispersity index, without the use of organic solvents or stabilizers. The mild conditions of the precipitation reaction, customizable properties of the microgels, and low viscosity for injections make them applicable for in vivo purposes. Unlike other fabrication techniques, microgel characteristics can be modified by changing the starting polymer molecular weight. Increasing the starting PEG molecular weight increased microgel diameter and swelling ratio. Further modifications are suggested such as encapsulating molecules during microgel crosslinking. Simple adaptations to the PEG microgel building blocks are explored for future applications of microgels as drug delivery vehicles and tissue engineering scaffolds. 相似文献
18.
Permeability control of glucose-sensitive nanoshells 总被引:1,自引:0,他引:1
To study the permeability of hydrogel in nanoscale thickness, core-shell microgels with degradable poly( N-isopropylacrylamide) (PNIPAM) as the core and nondegradable phenylboronic acid (PBA)-conjugated poly( N-isopropylacrylamide) [P(NIPAM-PBA)] as the shell were designed and synthesized. Laser light scattering was used to study the volume phase transitions and core degradation behavior of the core-shell microgels. The release of the degraded core polymer chains can be conveniently followed by turbidity change. At room temperature, the degraded polymer segments diffuse freely out of the precursor poly( N-isopropylacrylamide-co-acrylic acid) gel shells in water. In contrast, the PBA-modified P(NIPAM-PBA) nanoshell can hold most of the degraded core polymer chains under the same conditions, thanks to its condensed structure at the collapsed state. Lowering the temperature or increasing pH increases the swelling degree of the P(NIPAM-PBA) shell, which provides methods to control its permeability by temperature and pH. The complexation of PBA groups with glucose also enhances the swelling of the nanoshell and, thus, increases its permeability. The understanding of how to control the permeability of the glucose-sensitive gel nanoshell in hollow microgel particles is very important for further design of self-regulated insulin delivery systems. 相似文献
19.
We report investigations of specific and nonspecific adsorption effects on bioresponsive hydrogel microlenses to better understand their utility and potential advantages for biosensing. Bioresponsive microgels were prepared from stimuli-responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAM-co-AAc) microgels after functionalization with both biotin and ABP (as a photoaffinity label) via carbodiimide chemistry. Bioresponsive hydrogel microlenses were then constructed from the microgels via Coulombic assembly of the anionic microgels on a positively charged, silane-modified, glass substrate. Specific and nonspecific protein binding on the hydrogel microlenses was studied by monitoring the optical properties using brightfield and fluorescence optical microscopies. The bioresponsivity, as determined by changes in the microlensing power, is strongly coupled to the formation of cross-links via ligand-protein and/or antigen-antibody binding. However, the microlensing phenomenon and the intrinsic bioresponsivity of the hydrogels are completely insensitive to simple adsorption via nonspecific protein binding from reconstituted human serum. These results suggest that the hydrogel microlens construct may be a good candidate for a wide range of applications in which the bioresponsive material would be required to operate in complex biological media. 相似文献
20.
Bistra Kostova Elena Kamenska Dilyana Georgieva Konstantin Balashev Dimitar Rachev George Georgiev 《AAPS PharmSciTech》2017,18(1):166-174
Nowadays, the modern pharmaceutical investigations are directed toward obtaining of new polymer micro- and nano-sized drug delivery carriers. In this respect, the use of hydrogel carriers based on polyzwitterions (PZIs) is an opportunity in the preparation of polymer drug delivery systems with desired characteristics. This paper describes the synthesis and characterization of micro-structured p(VA-co-DMAPS) systems with different compositions in situ loaded with Ibuprofen by emulsifier-free emulsion copolymerization (EEC) in water. The mean size of the prepared microparticles was measured by SEM and particles have been visualized by AFM. The inclusion of Ibuprofen in the polyzwitterionic copolymer microgel systems was established by using DSC. In vitro drug release experiments were carried out in order to estimate the ability of the obtained microgels to modify the release of water-insoluble Ibuprofen. 相似文献