Enantioselective anion exchangers based on cinchona alkaloid‐derived carbamates: Influence of C8/C9 stereochemistry on chiral recognition

Four diastereomeric chiral stationary phases (CSPs) based on quinine, quinidine, epiquinine, and epiquinidine tert‐butyl carbamate selectors were synthesized and evaluated under ion exchange HPLC conditions with a set of racemic N‐acylated and N‐oxycarbonylated α‐amino acids as selectands. The enantioseparation potential of quinine‐ and quinidine‐derived CSPs proved to be far superior to that of their C₉‐epimeric congeners. The absolute configuration of C₉ stereogenic center of the cinchonan backbone of these selectors was identified as the structural feature controlling the elution order. Guided by an X‐ray structure of a most favorable selector–selectand complex and the observed chromatographic enantioseparation data, a chiral recognition model was advanced. The contributions of ion‐pairing, π–π donor–acceptor, hydrogen bonding and steric interactions were established as crucial factors. Chirality 11:522–528, 1999. © 1999 Wiley‐Liss, Inc.     

Direct resolution of ergot alkaloid enantiomers on a novel chiral silica-based stationary phase

A new covalently-bonded, silica-based stationary phase, using as the chiral selector the 1-(3-aminopropyl) derivative of (+)-(5R,8S,10R)-terguride, has been developed to resolve optically active isomers by HPLC. Good resolution of structurally related racemic ergot alkaloids were obtained using water-methanol mixtures as the eluent. Analysis of the influence of the type and concentration of the organic modifier, and the pH of the buffer in the mobile phase allowed the enantioseparation of these compounds to be optimized. Determination of the optical purity of a lisuride-containig drug is reported. © 1994 Wiley-Liss, Inc.     

Preparation and application of a new doubly tethered chiral stationary phase containing N-CH3 amide linkage based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid

A new doubly tethered chiral stationary phase (CSP 5) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was developed by attaching the second tethering group to silica gel through a carbon atom of the first tethering group of the corresponding singly tethered CSP (CSP 2) containing an N-CH3 tertiary amide linkage, which was previously developed in our laboratory, in order to enhance the CSP stability without the loss of chiral recognition efficiency. The new CSP was quite effective in the resolution of various racemic alpha-amino acids, amines, and amino alcohols, and the chiral recognition efficiency of the new CSP was even greater than that of the corresponding singly tethered CSP especially in terms of the resolution factors (RS). The stability of the new CSP was greater than that of the corresponding singly tethered CSP. The chromatographic resolution behaviors of the new CSP were generally consistent with those of the corresponding singly tethered CSP.     

Preparation and chromatographic performance of a multifunctional immobilized chiral stationary phase based on dialdehyde microcrystalline cellulose derivatives

A novel high‐performance liquid chromatography (HPLC) multifunctional immobilized chiral stationary phase was prepared by bonding dialdehyde microcrystalline cellulose to aminosilica via Schiff base reaction and then derivatized with 3,5‐dimethylphenyl isocyanate. The HPLC multifunctional immobilized chiral stationary phase could not only achieve chiral separation but also achieve achiral separation. Chiral separation evaluation showed that 1‐(1‐naphthyl)ethanol and mandelonitrile got separation in normal phase (NP) mode. Ranolazine, benzoin ethyl ether, metalaxyl, and diclofop were successfully separated in reversed phase (RP) mode. Aromatic compounds such as polycyclic aromatic hydrocarbons (PAHs), anilines, and aromatic acids were selected as analytes to investigate the achiral separation performance of the multifunctional immobilized chiral stationary phase in NP and RP modes. The achiral separation evaluation showed that six PAHs could get good separation within 10 minutes in NP mode. Four aromatic acids were well separated in RP mode. The retention mechanism of aromatic compounds on the stationary phase was discussed, founding that π‐π interaction, π‐π electron‐donor‐acceptor (EDA) interaction, and hydrogen bonding interaction played important roles during the achiral separation process. This multifunctional immobilized chiral stationary phase had the advantages of simple bonding steps, short reaction time, and no need for space arm.     

Enantiomeric separation of drugs and herbicides on a beta-cyclodextrin-bonded stationary phase.

A chemically bonded beta-cyclodextrin chiral stationary phase for HPLC was prepared in a "one pot" process by the reaction of a phenylated beta-cyclodextrin with silica gel. Various racemic analytes such as drugs (aminoalcohol adrenergic beta-blockers, benzodiazepine anxiolytics, arylpropionic acid antiinflammatory agents) and herbicides (aryloxypropionic acids and esters) were separated on the prepared material. The column showed good chiral recognition ability for most of the solutes tested when using heptane and either 2-propanol or chloroform as organic mobile phase modifiers.     

New chiral stationary phases based on xanthone derivatives for liquid chromatography

Six chiral derivatives of xanthones (CDXs) were covalently bonded to silica, yielding the corresponding xanthonic chiral stationary phases (XCSPs). The new XCSPs were packed into stainless‐steel columns with 150 x 4.6 mm i.d. Moreover, the greening of the chromatographic analysis by reducing the internal diameter (150 x 2.1 mm i.d.) of the liquid chromatography (LC) columns was also investigated. The enantioselective capability of these phases was evaluated by LC using different chemical classes of chiral compounds, including several types of drugs. A library of CDXs was evaluated in order to explore the principle of reciprocity as well as the chiral self‐recognition phenomenon. The separation of enantiomeric mixtures of CDXs was investigated under multimodal elution conditions. The XCSPs provided high specificity for the enantiomeric mixtures of CDXs evaluated mainly under normal‐phase elution conditions. Furthermore, two XCSPs were prepared with both enantiomers of the same xanthonic selector in order to confirm the inversion order elution.     

Liquid chromatographic enantiomer resolution of N-hydrazide derivatives of 2-aryloxypropionic acids on a crown ether derived chiral stationary phase

The liquid chromatographic separation of the enantiomers of several N-hydrazide derivatives of 2-aryloxypropionic acids was performed on a crown ether type chiral stationary phase derived from (18-crown-6)-2,3,11,12-tetracarboxylic acid. The behavior of chromatographic parameters by the change of mobile phases and additives for the resolution of these analytes was investigated. The enantiomers of all analytes were base-line resolved with a mobile phase of 100% methanol containing 20 mM H2SO4. These results are the first reported for enantiomer resolution of chiral acids of 2-aryloxypropionic acids as their N-hydrazide derivatives.     

Chiral separation of underivatized amino acids in supercritical fluid chromatography with chiral crown ether derived column

The supercritical fluid chromatographic separation of underivatized amino acids was explored using immobilized chiral crown ether column CROWNPAK CR-I (+) and mass spectrometric detection. The type of modifier, acidic additives, and the role of water were investigated. Enantioseparation was achieved for all 18 amino acids investigated with short retention times (less than 3 minutes) and average resolution of greater than 5.0. Analysis of enantiomerically pure standards demonstrated the D enantiomer eluted first for all amino acids using a CROWNPAK CR-I (+) column.     

Liquid chromatographic resolution of 3-amino-1,4-benzodiazepin-2-ones on crown ether-based chiral stationary phases

3-Amino-5-phenyl (or 5-methyl)-1,4-benzodiazepin-2-ones, which are chiral precursors of anti-respiratory syncytial virus active agents, were resolved on three different chiral stationary phases (CSPs) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid or (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6. Among the three CSPs, the CSP that is based on (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6 and containing residual silanol group-protecting n-octyl groups on the silica surface was found to be most effective with the use of 80% ethanol in water containing perchloric acid (10 mM) and ammonium acetate (1.0 mM) as a mobile phase. The separation factors (α) and resolutions (R(S) ) were in the range of 1.90-3.21 and 2.79-5.96, respectively. From the relationship between the analyte structure and the chromatographic resolution behavior, the chiral recognition mechanism on the CSP based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was proposed to be different from that on the CSP based on (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6. In addition, the chromatographic resolution behavior of the most effective CSP was investigated as a function of the composition of aqueous mobile phase containing organic and acidic modifier and ammonium acetate.     

Chromatographic resolution of the chiral isomers of several beta-blockers over cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase.

The optical resolution of seven beta-blockers which have in common the N-isopropyl-3-aryloxy-2-hydroxypropylamine moiety was carried out by HPLC using the cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase to quantitatively characterize the enantioselectivity of these compounds. The capacity factors and separation factors at different column temperature were determined with some qualitative trends derived. A compensation effect was observed for these compounds where there exists an approximately linear relationship between the enantiomeric differences in enthalpic and entropic energies.     

Cellulose type chiral stationary phase based on reduced graphene oxide@silica gel for the enantiomer separation of chiral compounds

The graphene oxide (GO) was covalently coupled to the surfaces of silica gel (SiO₂) microspheres by amide bond to get the graphene oxide@silica gel (GO@SiO₂). Then, the GO@SiO₂ was reduced with hydrazine to the reduced graphene oxide@silica gel (rGO@SiO₂), and the cellulose derivatives were physically coated on the surfaces of rGO@SiO₂ to prepare a chiral stationary phase (CSP) for high performance liquid chromatography. Under the optimum experimental conditions, eight benzene‐enriched enantiomers were separated completely, and the resolution of trans‐stilbene oxide perfectly reached 4.83. Compared with the blank column of non‐bonded rGO, the separation performance is better on the new CSP, which is due to the existence of rGO to produce special retention interaction with analytes, such as π‐π stacking, hydrophobic effect, π‐π electron‐donor–acceptor interaction, and hydrogen bonding. Therefore, the obtained CSP shows special selectivity for benzene‐enriched enantiomers, improves separation selectivity and efficiency, and rGO plays a synergistic effect with cellulose derivatives on enantioseparation.     

Direct enantiospecific HPLC bioanalysis of (R,S)-atenolol on a chiral stationary phase

The simultaneous determination of the enantiomers of the β₁-selective adrenergic antagonist atenolol in human plasma and urine is described. After an alkaline preextraction atenolol is extracted from biological material at pH 12.3 using dichloromethane/propan-2-ol. The separation of the underivatized enantiomers is achieved by high-performance liquid chromatography on a chiral stationary phase (Chiralcel OD, cellulose tris-3, 5-dimethylphenylcarbamate, coated on silica gel) with fluorimetric detection. (?)-(S)-Pindolol is used as an internal standard. The detection limits of 5 ng/ml enantiomer in plasma and 50 ng/ml enantiomer in urine are sufficient for pharmacokinetic studies after therapeutic doses. © 1993 Wiley-Liss, Inc.     

Enantioselective and diastereoselective separation of synthetic pyrethroid insecticides on a novel chiral stationary phase by high-performance liquid chromatography

A novel chiral packing material for high-performance liquid chromatography (HPLC) was prepared by connecting (R)-1-phenyl-2-(4-methylphenyl) ethylamine (PTE) amide derivative of (S)-isoleucine to aminopropyl silica gel through 2-amino-3,5-dinitro-1-carboxamido-benzene unit. This chiral stationary phase was applied to the enantioselective and diastereoselective separation of five pyrethroid insecticides by HPLC under normal phase condition. To achieve satisfactory baseline separation an optimization of the variables of mobile phase composition was required. The two enantiomers of fenpropathrin and four stereoisomers of fenvalerate were baseline separated using hexane-1,2-dichloroethane-2-propanol as mobile phase. The results show that the enantioselectivity of CSP is better than Pirkle type 1-A column for these compounds. Only partial separations for the cypermethrin and cyfluthrin stereoisomers were observed. Seven peaks and eight peaks were observed for cypermethrin and cyfluthrin, respectively. The elution orders were assigned by using different stereoisomer-enriched products.     

Evaluation of the chiral recognition properties and the column performances of three chiral stationary phases based on cellulose for the enantioseparation of six dihydropyridines by high‐performance liquid chromatography

Separations of six dihydropyridine enantiomers on three commercially available cellulose‐based chiral stationary phases (Chiralcel OD‐RH, Chiralpak IB, and Chiralpak IC) were evaluated with high‐performance liquid chromatography (HPLC). The best enantioseparation of the six chiral drugs was obtained with a Chiralpak IC (250 × 4.6 mm i.d., 5 μm) column. Then the influence of the mobile phase including an alcohol‐modifying agent and alkaline additive on the enantioseparation were investigated and optimized. The optimal mobile phase conditions and maximum resolution for every analyte were as follows respectively: n‐hexane/isopropanol (85:15, v /v) for nimodipine (R  = 5.80) and cinildilpine (R  = 5.65); n‐hexane/isopropanol (92:8, v /v) for nicardipine (R  = 1.76) and nisoldipine (R  = 1.92); and n‐hexane/isopropanol/ethanol (97:2:1, v /v/v) for felodipine (R  = 1.84) and lercanidipine (R  = 1.47). Relative separation mechanisms are discussed based on the separation results, and indicate that the achiral parts in the analytes' structure showed an important influence on the separation of the chiral column.     

New chiral stationary phases for liquid chromatography based on small molecules: Development,enantioresolution evaluation and chiral recognition mechanisms

Recently, we reported the development of new chiral stationary phases (CSPs) for liquid chromatography (LC) based on chiral derivatives of xanthones (CDXs). Based on the most promising CDX selectors, 12 new CSPs were successfully prepared starting from suitable functionalized small molecules including xanthone and benzophenone derivatives. The chiral selectors comprising one, two, three, or four chiral moieties were covalently bonded to a chromatographic support and further packed into LC stainless-steel columns (150 × 2.1 mm I.D.). The enantioselective performance of the new CSPs was evaluated by LC using different classes of chiral compounds. Specificity for enantioseparation of some CDXs was observed in the evaluation of the new CSPs. Besides, assessment of chiral recognition mechanisms was performed by computational studies using molecular docking approach, which are in accordance with the chromatographic parameters. X-Ray analysis was used to establish a chiral selector 3D structure.     

HPLC with cellulose Tris (3,5‐DimethylPhenylcarbamate) chiral stationary phase: Influence of coating times and coating amount on chiral discrimination

Coating cellulose tris (3,5‐dimethylphenylcarbamate) (CDMPC) on silica gels with large pores have been demonstrated as an efficient way for the preparation of chiral stationary phase (CSP) for high‐performance liquid chromatography (HPLC). During the process, a number of parameters, including the type of coating solvent, amount of coating, and the method for subsequent solvent removing, have been proved to affect the performance of the resultant CSPs. Coating times and the concentration of coating solution, however, also makes a difference to CSPs' performance by changing the arrangement of cellulose derivatives while remaining the coating amount constant, have much less been studied before, and thereby, were systematically investigated in this work. Results showed that CSPs with more coating times exhibited higher chiral recognition and column efficiency, suggesting that resolution was determined by column efficiency herein. Afterwards, we also investigated the effect of coating amount on the performance of CSPs, and it was shown that the ability of enantio‐recognition did not increase all the time as the coating amount; and four of seven racemates achieved best resolution when the coating amount reached to 18.37%. At the end, the reproducibility of CDMPC‐coated CSPs were further confirmed by two methods, ie, reprepared the CSP‐0.15‐3 and reevaluated the effect of coating times.     

High-performance liquid chromatographic enantioseparation of Betti base analogs on a newly developed isopropyl carbamate-cyclofructan6-based chiral stationary phase

The direct separation of the enantiomers of 1-(α-aminoarylmethyl)-2-naphthol, 1-(α-aminoalkyl)-2-naphthol, 2-(α-aminoarylmethyl)-1-naphthol analogs, and 2-(1-amino-2-methylpropyl)-1-naphthol) was performed on a newly developed chiral stationary phase containing isopropyl carbamate-cyclofructan6 as chiral selector, with n-heptane/alcohol/trifluoroacetic acid as mobile phase. The effects of the mobile-phase composition, the nature and concentration of the alcoholic and acidic modifiers, and the structures of the analytes on the retention and resolution were investigated. In some cases, separations were carried out at constant mobile-phase compositions in the temperature range 5-40°C. Thermodynamic parameters and T(iso) values were calculated from plots of ln k' or ln α versus 1/T. -Δ(ΔH°) ranged from 2.8 to 3.2 kJ mol(-1) , -Δ(ΔS°) from 7.7 to 10.1 J mol(-1) K(-1) , and -Δ(ΔG°) from 0.2 to 0.5 kJ mol(-1) . It was found that the enantioseparations were enthalpy driven. The sequence of elution of the stereoisomers determined in some cases was (R) < (S).     

High-performance liquid chromatographic enantioseparation of N-protected α-amino acids using nonporous silica modified by a quinine carbamate as chiral stationary phase

In this study, tert-butyl carbamoylated quinine as chiral selector was immobilized on nonporous silica (NPS) 1.5 μm particles developed by MICRA, and this new chiral stationary phase (CSP) was packed into a 3.3 cm column (4.6 mm ID). A series of various N-protected α-amino acids was chosen as chiral selectands, including 3.5-dinitrobenzyloxycarbonyl amino acids (DNZ-AAs). In order to optimize the chromatographic conditions with this novel CSP and to apply it to the resolution of acidic analytes the following parameters have been varied and studied: pH of the mobile phase, buffer concentration, and percentage of methanol or acetonitrile in the mobile phase. DryLab^R software was applied to optimize enantioseparation by simulating chromatographic functions of experimental conditions for isocratic and/or gradient runs. Thus, we were able to resolve a set of test compounds within several minutes, whereby our attention was particularly drawn to the resolution of DNZ-AA derivatives. Chirality 9:157–161, 1997. © 1997 Wiley-Liss, Inc.     

The role of pi-acidic and pi-basic chiral stationary phases in the high-performance liquid chromatographic enantioseparation of unusual beta-amino acids

The application of 3,5-dimethylphenyl-carbamoylated-beta-cyclodextrin (Cyclobond I 2000 DMP) and 2,6-dinitro-4-trifluoromethylphenyl-ether-beta-cyclodextrin-based (Cyclobond DNP) chiral stationary phases for the high-performance liquid chromatographic enantioseparation of unusual beta-amino acids is reported. The investigated amino acids were saturated or unsaturated alicyclic beta-3-homo-amino acids and bicyclic beta-amino acids. Prior to chromatographic analyses, all amino acids were transformed to N-3,5-dinitrobenzoyl- or N-3,5-dimethylbenzoyl form to ensure a pi-acidic or pi-basic function and to enhance the pi-acidic-pi-basic interactions between analytes and chiral selectors. Chromatographic results are given as retention, separation and resolution factors. The chromatographic conditions were varied to achieve optimal separation. The sequence of elution of the enantiomers was determined in some cases.     

Preparation and enantioseparation of a mixed selector chiral stationary phase derived from benzoylated tartaric acid and 1,2‐diphenylethylenediamine

L ‐Dibenzoyl tartaric acid was mono‐esterified with benzyl alcohol, and then chlorinated with SOCl₂ to give (2S,3S)‐1‐(benzyloxy)‐4‐chloro‐1,4‐dioxobutane‐2,3‐diyl dibenzoate (Selector 1 ). (1R,2R)‐1,2‐Diphenylethylenediamine was mono‐functionalized with phenyl isocyanate and phenylene diisocyanate in sequence to give (1R,2R)‐1,2‐diphenyl‐2‐(3‐phenylureido)ethyl 4‐ isocyanatophenylurea (Selector 2 ). Two brush‐type chiral stationary phases (CSPs) of single selector were prepared by separately immobilizing selectors 1 and 2 on aminated silica gel. Selectors 1 and 2 were simultaneously immobilized on aminated silica gel to give a mixed selector CSP. The enantioseparation ability of these CSPs was studied. The CSP of selector 1 has strongest separation ability, while the enantioseparation ability of the mixed selector CSP is relatively lower. Chirality 2010. © 2009 Wiley‐Liss, Inc.