Replication of mini-F plasmid in vitro promoted by purified E protein

Summary An in vitro system for replication of mini-F plasmid DNA was constructed. This system consists of an ammonium sulfate fraction II (Fuller et al. 1981) from Escherichia coli extract, exogeneously added purified E protein encoded by mini-F plasmid, and mini-F DNA in a closed circular form. Experiments with this system showed that the 217 bp DNA region which contains the A+T rich cluster and the four 19 bp direct repeats responsible for incB incompatibility is essential for mini-F DNA replication.     

Control of replication of the broad host range plasmid RSF1010: The incompatibility determinant consists of directly repeated DNA sequences

Summary A 500 bp DNA fragment located in the vicinity of the origin of replication of plasmid RSF1010 was cloned into the plasmid vector pBR322 and shown to exhibit incompatibility against parental RSF1010. The rightmost region of this fragment contains three perfect 20 pb direct repeats and a fourth half-repeat of 11 bp, as shown by DNA sequencing. Delection of the four repeats from the cloned fragment resulted in complete loss of incompatibility whereas partial deletion of the repeated sequence resulted in a concurrent decrease in the expression of incompatibility. We conclude that the incompatibility determinant of RSF1010 is defined by the four repeats and also that the incompatibility expressed is not very strong, since the presence of about 1.5 times as many copies of the repeated sequence as are normally in a cell does not cause a total switch off of RSF1010 replication, but only a 40% reduction in the rate of replication.Abbreviations kb kilobase pairs - bp base pairs - Km^r, Tc^r resistance to kanamycin and tetracycline, respectively     

Involvement of DnaK protein in mini-F plasmid replication: temperature-sensitive seg mutations are located in the dnaK gene

Summary The seg mutants (seg-1 and seg-2) of Escherichia coli cannot support the replication of the F factor and mini-F plasmids at 42°C. We cloned the wild-type E. coli chromosomal DNA fragment complementing the seg-1 and seg-2 mutations and found that both mutations were complemented by the wild-type dnaK gene coding for a heat shock protein. Transduction with phage P1 indicated that the seg-2 mutation is located at about 0.3 min in the region containing the dnaK gene in the order trpR-thrA-seg-2-leuB, consistent with the locus of the dnaK gene. Cloning and sequencing of the dnaK gene of the seg mutants showed that there was one base substitution within the dnaK gene in each mutant causing an amino acid substitution. These results indicate that the seg gene in which the seg-1 and seg-2 mutations occurred is identical to the dnaK gene. The mini-F plasmid pXX325 did not transform a dnaK null mutant to ampicillin resistance at 30°C in contrast to plasmids pBR322, pACYC184 and pSC101, which did. The active dnaK (seg) gene product is therefore essential for replication of the mini-F plasmid at both 30° and 42°C.     

An essential gene for replication of the mini-F plasmid from origin I

Summary We constructed a series of defective mini-F plasmids, which have deletion(s) in the replication origin I and/or origin II, and their derivatives, which do not produce F3 protein, by insertion of the XhoI fragment of Tn5 into the XhoI site at 41.0 F (kilobases on the coordinate map of F-plasmid). Using these mutant mini-F plasmids, we found that F3 protein is essential for the replication of mini-F from origin I, but not from origin II.     

Additional genes essential for replication of the mini-F plasmid from origin I

Summary We isolated a series of Tn5-insertional mutants from the mini-F plasmid, which has a deletion in the origin II region and replicates exclusively from origin I, and found that the mutants that had Tn5 in either the F4 or the F5 gene were defective in their replication. It is concluded that, in addition to the F3 gene on which we have reported previously, both the F4 and the F5 genes are essential for the replication from origin I.     

Modification of the plasmid initiator protein RepC active site during replication

Abstract pT181 is a Staphylococcus aureus rolling circle replicating plasmid whose copy number is controlled by regulating the synthesis and activity of the initiator protein, RepC. The RepC dimer is modified during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. To purify RepC*, RepC was expressed in S. aureus as a fusion protein with a polyhistidine tail. The histidine-tagged RepC retains its initiation and topoisomerase activities in vitro. Histagged RepC/RepC and RepC/RepC* were purified in a two-step procedure. Peptide mapping, mass spectrometric analysis and protein sequencing of purified RepC and RepC* were carried out, and both proteins appeared identical, except that the peptide containing the RepC active site tyrosine used in nicking activity was absent when the purified RepC* sample was analyzed. The absence of the active site in RepC* suggests that this site was modified during replication. The results provide the first direct biochemical evidence that RepC* is a modified form of RepC, and support a model in which RepC replication of pT181 leaves RepC with an oligonucleotide blocking the active site of one of its subunits.     

Partitioning of the F plasmid: Overproduction of an essential protein for partition inhibits plasmid maintenance

Summary Multicopy plasmids carrying the sopB gene of the F plasmid inhibit stable inheritance of a coexisting mini-F plasmid. This incompatibility, termed IncG, is found to be caused by excess amounts of the SopB protein, which is essential for accuratepartitioning of plasmid DNA molecules into daughter cells. A sopB-carrying multicopy plasmid that shows the IncG⁺ phenotype was mutagenized in vitro and IncG negative mutant plasmids were isolated. Among these amber and missense mutants of sopB, mutants with a low plasmid copy number and a mutant in the Shine-Dalgarno sequence for translation of the SopB protein were obtained. These results demonstrate that the IncG phenotype is caused by the SopB protein, and that the incompatibility is expressed only when the protein is overproduced. This suggests that the protein must be kept at appropriate concentrations to ensure stable maintenance of the plasmid.     

The Rep protein binding elements of the plasmid ColE2-P9 replication origin

The plasmid ColE2-P9 (ColE2) origin (32bp) is specifically recognized by the plasmid-specified Rep protein that initiates DNA replication. The ColE2 origin is divided into at least three functional subregions (I, II, and III), and three sites (a, b, and c) found in subregions I and II play important roles in Rep protein binding. We performed SELEX experiments of plasmid ColE2 to determine the optimal sequences for specific binding of the Rep protein. From these experiments, we obtained a common 16-bp sequence (5'-TGAGACCANATAAGCC-3'), which corresponds to about one half of the minimal ColE2 origin and contains sites a and b. Gel mobility shift assays using single-point mutant origins and the Rep protein further indicated that high affinity sequence-specific recognition by the Rep protein requires sites a, b, and c, but that mutations in site c were less disruptive to this recognition than those in sites a and b.     

A rapid screening technique for the detection of repeated DNA sequences in plant tissues

Summary DNA sequences cloned from nuclear and mitochondrial chromosomes have been used as hybridisation probes to distinguish different plant genotypes. The probes are hybridised to squashed segments of tissue e.g. root tips. The squash-dot method is rapid and suitable for screening large numbers of individual plants. One probe, specific for a rye repeated sequence family, enables rye chromosomes to be detected in wheat plants. A probe for ribosomal DNA enables plants with high or low numbers of ribosomal RNA genes to be distinguished. A maize mitochondrial DNA probe is used to distinguish plants with N, T or S cytoplasms.     

Direct repeat sequences are essential for function of the cis-acting locus of transfer (clt) of Streptomyces phaeochromogenes plasmid pJV1

The functionality of direct and inverted repeat sequences inside the cis acting locus of transfer (clt) of the Streptomyces plasmid pJV1 was determined by testing the effect of different deletions on plasmid transfer. The results show that the single most important element for pJV1 clt function is a series of evenly spaced 9 bp long direct repeats which match the consensus CCGCACA(C/G)(C/G), since their deletion caused a dramatic reduction in plasmid transfer. The presence of these repeats in the absence of any other clt sequences allowed plasmid transfer to occur at a frequency that was at least two orders of magnitude higher than that obtained in the complete absence of clt. A database search revealed regions with a similar organization, and in the same position, in Streptomyces plasmids pSN22 and pSLS, which have transfer proteins homologous to those of pJV1.     

Mini-F E protein: the carboxy-terminal end is essential for E gene repression and mini-F copy number control

Mini-F is a segment of the conjugative plasmid F consisting of two origins of replication flanked by regulatory regions, which ensure a normal control of replication and partitioning. Adjacent to the ori-2 origin is a complex coding region that consists of the E gene overlapped by three open reading frames with the coding potential for 9000 Mr polypeptides here designated 9 kd-1, 9 kd-2 and 9 kd-3. In this paper, we show that open reading frame 9 kd-3 is preceded by active promoter and Shine-Dalgarno sequences. The E coding region specifies: an initiator of replication, which acts at the ori-2 site; a function that negatively regulates the expression of the E gene; and a function involved in mini-F copy number control. To assign one of these functions to one of the overlapping coding sequence, we have isolated, characterized and sequenced mutations mapping in the E coding region. In this paper, we analyse two mutations (cop5 and pla25) that abolish the repression of the E gene. As these mutations affect the primary structure of protein E itself but not the 9 kd polypeptides, we conclude that protein E takes part in the negative regulation of its own synthesis. In addition, the localization of the cop5 and pla25 mutations indicates that the carboxy-terminal end of the E protein is involved in the autorepression function. The cop5 mutation causes an eightfold increase of the mini-F copy number. The pla25 mutation leads to the inability of the derived mini-F plasmid to give rise to plasmid-harbouring bacteria. The ways in which the cop5 and pla25 mutations may lead to such phenotypes are discussed in relation to the different functions mapping in the E coding sequence.     

Effect of repeated DNA sequences on direct gene transfer in protoplasts of Nicotiana plumbaginifolia

Summary Highly repeated nuclear DNA sequences from leaves of Nicotiana plumbaginifolia were cloned in pBR322 and tested for their effect on direct gene transfer in protoplasts of the same organism. Protoplasts were prepared from suspension cultures and were incubated in the presence of the plasmid pHP23 carrying the kanamycin resistance gene APH(3)II and in the presence of the plasmids carrying the cloned sequence. DNA uptake was induced by a polyethyleneglycol (PEG) treatment. Out of the 22 tested clones, 3 significantly stimulated the frequency of appearance of transformed colonies. DNA was extracted from some of the kanamycin-resistant calli obtained by co-transformations. Dot-blots have shown that the stimulatory effect on transformation frequency is often accompanied by a consistent increase in integrated genes sequences.     

Purification and characterization of the sopB gene product which is responsible for stable maintenance of mini-F plasmid

Summary The mini-F plasmid has the trans-acting sopA, sopB genes and the cis-acting sopC DNA which are essential for plasmid partitioning. In this paper, we report the purification of the sopB gene product from extracts of cells harboring a pBR322 derivative carrying the sopB gene. The purity of the final preparation was more than 95%, as determined by densitometry. The amino acid sequence of the amino-terminal region of the protein for the 17 residues identified was identical to that predicted from the DNA sequence of the sopB gene. Therefore, it was concluded that the protein was the sopB gene product. Using anti-SopB serum, the SopB protein was detected in the cell lysates of F⁺, F, and Hfr strains. The SopB protein bound to the plasmid DNA of a pBR322 derivative carrying the sopC DNA segment, but not to the vector plasmid pBR322.     

A family of related sequences associated with (TTTAGGG)n repeats are located in the interstitial regions of wheat chromosomes

A family of related sequences associated with (TTTAGGG) _n repeats has been cloned from the wheat cultivar Chinese Spring. These sequences reveal a high level of polymorphism between wheat varieties when used as restriction fragment length polymorphism (RFLP) probes. Although this family of sequences contains motifs homologous to the repeats in the telomeres of wheat, they are located at interstitial sites on wheat chromosomes.     

In vivo definition of the functional origin of leading strand replication on the lactococcal plasmid pFX2

The lactococcal plasmid pFX2 belongs to a family of plasmids, whose prototype is the streptococcal plasmid pMV158, that replicates by the rolling circle mechanism. Determination of the nucleotide sequence of the repX gene of pFX2 allowed us to make some minor corrections in the published sequence, and to show that the repX gene is identical to the rep gene of plasmid pWV01. We have established pFX2 in Escherichia coli and in Streptococcus pneumoniae. In the latter host, we have defined in vivo the nick site introduced by the RepX protein. Plasmid pFX2 and the pMV158 derivative pLS1 exhibit a moderate degree of incompatibility in S. pneumoniae. Cloning of the double strand origin (dso) of pFX2 into a high-copy-number plasmid that is compatible with the pMV158 replicon led to an increase in incompatibility toward pLS1. Plasmids pFX2 and pLS1 exhibit homologies in their Rep proteins and in their dso sequences, but not in their negative control elements. Thus, the observed incompatibility indicates that cross-recognition of Rep proteins and dso takes place. Received: 25 May 1998 / Accepted: 8 July 1998     

Mutations affecting replication and copy number control in plasmid mini-F both reside in the gene for the 29-kDa protein

We have isolated and characterized cop, copts, and repam mutants of plasmid mini-F after in vitro mutagenesis with hydroxylamine. cop mutants exhibit a copy number of about 10 per cell. The copts mutants are cold-sensitive and have, at 25 degrees C, a copy number of about 30-40 copies per cell, which drops to 4 copies at 42 degrees C. The cop and repam mutations affect the 29-kDa E protein. The Copts phenotype results from the simultaneous occurrence of two mutations, a cop mutation in the E protein and a temperature-dependent mutation (termed ecp) enhancing the Cop phenotype at low temperature. The latter new type of mutation is located within the DNA region 44.1-44.85F. Complementation experiments with plasmid cointegrates show that the wild-type gene is dominant over the cop allele. The nucleotide sequences of the cop and the repam mutations have been determined.     

植物乳杆菌编码复制起始蛋白天然质粒的系统进化分析

【目的】探究复制起始蛋白(Replication initiation protein,Rep)是否可以作为天然质粒系统进化关系研究的分子标记。【方法】以植物乳杆菌天然质粒编码的Rep为研究对象,通过构建Rep系统进化树详细分析和讨论这些质粒的系统进化关系。【结果】植物乳杆菌45个编码Rep天然质粒可以划分为5个进化关系紧密的家族和1个独立进化质粒p G6302,家族1-4质粒可以进一步划分为10个进化关系更近的亚家族类群,因此这些质粒可能起源于6个祖先质粒。【结论】Rep氨基酸序列显示了适度的保守性和变异性,是植物乳杆菌编码Rep质粒进化研究理想的分子标记,为植物乳杆菌天然质粒系统进化研究提供了一种简单、有效的分析方法和标准,并为植物乳杆菌或其他乳酸菌天然质粒系统进化研究提供了分子水平的佐证和依据。     

Requirement of the Escherichia coli dnaA gene function for ori-2-dependent mini-F plasmid replication.

The mini-F plasmids pSC138, pKP1013, and pKV513 were unable to transform Escherichia coli cells with a dnaA-defective mutation under nonpermissive conditions. The dnaA defect was suppressed for host chromosome replication either by the simultaneous presence of the rnh-199 (amber) mutation or by prophage P2 sig5 integrated at the attP2II locus on the chromosome, both providing new origins for replication independent of dnaA function. The dnaA mutations tested were dnaA17, dnaA5, and dnaA46. dnaA5 and dnaA46 are missense mutations. dnaA17 is an amber mutation whose activity is controlled by the temperature-sensitive amber suppressor supF6. Under permissive conditions in which active DnaA protein was available, the mini-F plasmids efficiently transformed the cells. However, the transformants lost the plasmid as the cells multiplied under conditions in which DnaA protein was inactivated or its synthesis was arrested. As controls, plasmids pSC101 and pBR322 were examined along with mini-F; pSC101 behaved in the same manner as mini-F, showing complete dependence on dnaA for stable maintenance, whereas pBR322 was indifferent to the dnaA defect. Thus, ori-2-dependent mini-F plasmid replication seems to require active dnaA gene function. This notion was strengthened by the results of deletion analysis which revealed that integrity of at least one of the two DnaA boxes present as a tandem repeat in ori-2 was required for the origin activity of mini-F replication.