Atomic force microscopy and force spectroscopy study of Langmuir-Blodgett films formed by heteroacid phospholipids of biological interest

Langmuir-Blodgett (LB) films of two heteroacid phospholipids of biological interest 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), as well as a mixed monolayer with χ_POPC = 0.4, were transferred onto mica in order to investigate by a combination of atomic force microscopy (AFM) and force spectroscopy (FS) their height, and particularly, their nanomechanical properties. AFM images of such monolayers extracted at 30 mN m^− 1 revealed a smooth and defect-free topography except for the POPE monolayer. Since scratching such soft monolayers in contact mode was proved unsuccessful, their molecular height was measured by means of the width of the jump present in the respective force-extension curves. While for pure POPC a small jump occurs near zero force, for the mixed monolayer with χ_POPC = 0.4 the jump occurs at ∼ 800 pN. Widths of ∼ 2 nm could be established for POPC and χ_POPC = 0.4, but not for POPE monolayer at this extracting pressure. Such different mechanical stability allowed us to directly measure the threshold area/lipid range value needed to induce mechanical stability to the monolayers. AFM imaging and FS were next applied to get further structural and mechanical insight into the POPE phase transition (LC-LC′) occurring at pressures > 36.5 mN m^− 1. This phase transition was intimately related to a sudden decrease in the area/molecule value, resulting in a jump in the force curve occurring at high force (∼ 1.72 nN). FS reveals to be the unique experimental technique able to unveil structural and nanomechanical properties for such soft phospholipid monolayers. The biological implications of the nanomechanical properties of the systems under investigation are discussed considering that the annular phospholipids region of some transmembrane proteins is enriched in POPE.     

Fabrication of protein a-viologen hetero Langmuir-Blodgett film for fluorescence immunoassay

Protein A molecular thin film was fabricated as a platform of antibody-based biosensor. For the immobilization of the protein A thin film, a viologen multilayer was built up using the Langmuir-Blodgett (LB) technique, and then, protein A was adsorbed on the viologen LB film by an electrostatic interaction force, which was formed as a hetero-film structure. For the deposition of viologen, surface pressure area (π-A) isotherm was investigated. The fabricated protein A-viologen hetero LB film was investigated using atomic force microscopy (AFM). Using the developed molecular film, antibody immobilization and fluorescence measurement was carried out.     

Field-Effect Transistor based on conducting Langmuir-Blodgett films of EDTTTF derivatives

A Field-Effect Transistor in which the channel is made of Langmuir-Blodgett layers of EDTTTF derivatives is described and studied. The device behaves as a P-channel MOSFET working in the depletion mode. A deep modulation of the film conduction properties and non-linear contact resistance effects have been observed.     

Enhanced activity of horseradish peroxidase in Langmuir-Blodgett films of phospholipids

The immobilization of enzymes in nanostructured films has potential applications, e.g. in biosensing, for which the activity may not only be preserved, but also enhanced if optimized conditions are identified. Optimization is not straightforward because several requirements must be fulfilled, including a suitable matrix and film-forming technique. In this study, we show that horseradish peroxidase (HRP) has its activity enhanced when immobilized in Langmuir-Blodgett (LB) films, in conjunction with dipalmitoylphosphatidylglycerol (DPPG). Incorporation of HRP into a DPPG monolayer at the air-water interface was demonstrated with compression isotherms, and Polarization-Modulation Infrared Reflection Absorption Spectroscopy (PM-IRRAS). From the PM-IRRAS data, we inferred that HRP was not denatured when adsorbed on a pre-formed, low pressure DPPG monolayer. A change in orientation was induced by the phospholipid matrix, with the amide CO and NH groups from HRP being oriented perpendicular to the surface, parallel to the DPPG acyl chains, i.e. the α-helix was inserted into the monolayer. The mixed DPPG-HRP monolayer could be transferred onto solid supports, to which HRP activity was ca. 23% higher than in solution. The control of molecular architecture and choice of a suitable phospholipid matrix allowed HRP-containing LB films to be used in sensing peroxide.     

Linear dichroism and orientational studies of carotenoid Langmuir-Blodgett films

The linear dichroism of single monolayers of lutein, zeaxanthin and a mixture of lutein and synthetic phosphatidylcholine has been measured. The angle of orientation of the carotenoid molecules was found to lie between 45° and 51° relative to the plane of the solid support. Although the adsorbed monolayers were mostly in a monomeric state, microscopic observations, as well as the II-A isotherms, indicated the existence of crystalline islets. The results have been interpreted in connection with Haidinger's polarization brushes.     

Compositional domain immiscibility in whole myelin monolayers at the air-water interface and Langmuir-Blodgett films

Monomolecular layers of whole myelin membrane can be formed at the air-water interface from vesicles or from solvent solution of myelin. The films appear microheterogeneous as seen by epifluorescence and Brewster angle microscopy. The pattern consists mainly of two coexisting liquid phases over the whole compression isotherm. The liquid nature of the phases is apparent from the fluorescent probe behavior, domain mobility, deformability and boundary relaxation due to the line tension of the surface domains. The monolayers were transferred to alkylated glass and fluorescently labeled against myelin components. The immunolabeling of two major proteins of myelin (myelin basic protein, proteolipid-DM20) and of 2′,3′-cyclic nucleotide 3′-phosphodiesterase shows colocalization with probes partitioning preferentially in liquid-expanded lipid domains also containing ganglioside G_M1. A different phase showing an enrichment in cholesterol, galactocerebroside and phosphatidylserine markers is also found. The distribution of components is qualitatively independent of the lateral surface pressure and is generally constituted by one phase enriched in charged components in an expanded state coexisting with another phase enriched in non-charged constituents of lower compressibility. The domain immiscibility provides a physical basis for the microheterogeneity found in this membrane model system.     

Secondary structure dependent on metal ions of copper,zinc superoxide dismutase investigated by Fourier transform IR spectroscopy

Copper,zinc superoxide dismutase (Cu₂Zn₂-SOD) from bovine erythrocyte and its metal ion free derivatives, E₂Zn₂-SOD, Cu₂E₂-SOD, and E₂E₂-SOD (E: empty) were prepared and their secondary structures were investigated by Fourier transform ir spectroscopy. In 20 m M deuterated phosphate buffer (pD 7.5) solution at room temperature, the native Cu₂Zn₂-SOD contains about 34% β-strand, 17% β-turn, and 49% unordered structures, which is similar to the content determined by x-ray crystal structural analysis. The metal ion free derivatives decrease the component of β-strand and increase the unordered structure component in trend. Especially in the cases of zinc-free derivatives, Cu₂E₂-SOD and E₂E₂-SOD, about 24% β-strand, 20% β-turn, and 57% unordered structures are obtained. The result indicates that the zinc ion plays an important role in determining the secondary structure of copper,zinc superoxide dismutase. © 1997 John Wiley & Sons, Inc. Biopoly 42: 297–303, 1997     

Electronic and vibrational spectroscopy of the cytochrome c:cytochrome c oxidase complexes from bovine and Paracoccus denitrificans.

The 1:1 complex between horse heart cytochrome c and bovine cytochrome c oxidase, and between yeast cytochrome c and Paracoccus denitrificans cytochrome c oxidase have been studied by a combination of second derivative absorption, circular dichroism (CD), and resonance Raman spectroscopy. The second derivative absorption and CD spectra reveal changes in the electronic transitions of cytochrome a upon complex formation. These results could reflect changes in ground state heme structure or changes in the protein environment surrounding the chromophore that affect either the ground or excited electronic states. The resonance Raman spectrum, on the other hand, reflects the heme structure in the ground electronic state only and shows no significant difference between cytochrome a vibrations in the complex or free enzyme. The only major difference between the Raman spectra of the free enzyme and complex is a broadening of the cytochrome a3 formyl band of the complex that is relieved upon complex dissociation at high ionic strength. These data suggest that the differences observed in the second derivative and CD spectra are the result of changes in the protein environment around cytochrome a that affect the electronic excited state. By analogy to other protein-chromophore systems, we suggest that the energy of the Soret pi* state of cytochrome a may be affected by (1) changes in the local dielectric, possibly brought about by movement of a charged amino acid side chain in proximity to the heme group, or (2) pi-pi interactions between the heme and aromatic amino acid residues.     

Deposition behavior and photoelectrochemical characteristics of chlorophylla Langmuir-Blodgett films

The deposition behavior and photoelectric response characteristics of chlorophylla (Chla) monolayers and multilayers were investigated under various film fabrication conditions. Chla LB films were deposited onto quartz and pretreated ITO glass substrates under several fabrication conditions, including surface pressure and number of layers. The absorption spectra of Chla in a solution state and solid-like state (LB films) were fairly consistent with each other, and two absorption peaks were found at 678 and 438 nm, respectively. The prepared Chla LB films were set into an electrochemistry cell equipped with a Pt plate as the counter electrode, and the photoelectric response characteristics were obtained and analyzed relative to the light illumination. By considering the resulting photocurrents, the optimal fabrication conditions for Chla LB films were determined as 20 mN/m of surface pressure and 20 layers. The action spectrum of the Chla LB films was obtained in the visible region, and was found to be in good agreement with the absorption spectrum. The possible application of the proposed system as a constituent of an artificial color recognition device was suggested based on combining with the photoelectric conversion property of another lightsensitive biological pigment.     

Specific anchoring modes of two distinct dystrophin rod sub-domains interacting in phospholipid Langmuir films studied by atomic force microscopy and PM-IRRAS

Dystrophin rod repeats 1-3 sub-domain binds to acidic phosphatidylserine in a small vesicle binding assay, while the repeats 20-24 sub-domain does not. In the present work, we studied the adsorption behaviour of both sub-domains at the air/liquid interface and at the air/lipid interface in a Langmuir trough in order to highlight differences in interfacial properties. The adsorption behaviour of the two proteins at the air/liquid interface shows that they display surface activity while maintaining their alpha-helical secondary structure as shown by PM-IRRAS. Strikingly, R20-24 needs to be highly hydrated even at the interface, while this is not the case for R1-3, indicating that the surface activity is dramatically higher for R1-3 than R20-24. Surface-pressure measurements, atomic force microscopy and PM-IRRAS are used in a Langmuir experiment with DOPC-DOPS monolayers at two different surface pressures, 20 mN/m and 30 mN/m. At the lower surface pressure, the proteins are adsorbed at the lipid film interface while maintaining its alpha-helical structure. After an increase of the surface pressure, R1-3 subsequently produces a stable film, while R20-24 induces a reorganization of the lipid film with a subsequent decrease of the surface pressure close to the initial value. AFM and PM-IRRAS show that R1-3 is present in high amounts at the interface, being arranged in clusters representing 3.3% of the surface at low pressure. By contrast, R20-24 is present at the interface in small amounts bound only by a few electrostatic residues to the lipid film while the major part of the molecule remains floating in the sub-phase. Then for R1-3, the electrostatic interaction between the proteins and the film is enhanced by hydrophobic interactions. At higher surface pressure, the number of protein clusters increases and becomes closer in both cases implying the electrostatic character of the binding. These results indicate that even if the repeats exhibit large structural similarities, their interfacial properties are highly contrasted by their differential anchor mode in the membrane. Our work provides strong support for distinct physiological roles for the spectrin-like repeats and may partly explain the effects of therapeutic replacement of dystrophin deficiency by minidystrophins.     

Caspase-cleaved arrestin-2 and BID cooperatively facilitate cytochrome C release and cell death

Apoptosis is programmed cell death triggered by activation of death receptors or cellular stress. Activation of caspases is the hallmark of apoptosis. Arrestins are best known for their role in homologous desensitization of G protein-coupled receptors (GPCRs). Arrestins quench G protein activation by binding to activated phosphorylated GPCRs. Recently, arrestins have been shown to regulate multiple signalling pathways in G protein-independent manner via scaffolding signalling proteins. Here we demonstrate that arrestin-2 isoform is cleaved by caspases during apoptosis induced via death receptor activation or by DNA damage at evolutionarily conserved sites in the C-terminus. Caspase-generated arrestin-2-(1-380) fragment translocates to mitochondria increasing cytochrome C release, which is the key checkpoint in cell death. Cells lacking arrestin-2 are significantly more resistant to apoptosis. The expression of wild-type arrestin-2 or its cleavage product arrestin-2-(1-380), but not of its caspase-resistant mutant, restores cell sensitivity to apoptotic stimuli. Arrestin-2-(1-380) action depends on tBID: at physiological concentrations, arrestin-2-(1-380) directly binds tBID and doubles tBID-induced cytochrome C release from isolated mitochondria. Arrestin-2-(1-380) does not facilitate apoptosis in BID knockout cells, whereas its ability to increase caspase-3 activity and facilitate cytochrome C release is rescued when BID expression is restored. Thus, arrestin-2-(1-380) cooperates with another product of caspase activity, tBID, and their concerted action significantly contributes to cell death.     

IR spectra of cytochrome c denatured with deuterated guanidine hydrochloride show increase in beta sheet

Attenuated total reflectance Fourier transform IR (ATR-FTIR) spectra are obtained for horse heart ferricytochrome c in solutions of 0-7M guanidine hydrochloride and deuterated guanidine hydrochloride. Substitutions of deuterium for hydrogen in both the denaturant and protein provide resolvable amide I spectra over a wide range of denaturant concentrations. Deuteration enhances the ability to measure the true protein IR spectrum in the amide I region in which the secondary structure can be deduced, because spectra in D(2)O are less prone to spectral distortion upon background denaturant subtraction than spectra in H(2)O. Other investigators studying equilibrium unfolded cytochrome c were limited to guanidine concentrations below 3.0M because of detector saturation. Detector saturation is avoided with the use of ATR-FTIR spectroscopy, allowing one to obtain protein spectra at high denaturant concentrations. Second derivative spectra of samples show reductions in alpha helix and increases in beta sheet at high denaturant concentrations, contrary to expectations of finding primarily a random coil secondary structure. Using this new technique, the protein was estimated to consist of 51% beta sheet and only 15% random coil in the presence of 6.6M deuterated guanidine hydrochloride.     

Raman spectroscopy of secondary structure of elastinlike polymer poly(GVGVP)

Raman spectra of the elastinlike polypentapeptide poly(GVGVP) were measured in H(2)O and D(2)O as solutions and, after increasing the temperature, as suspensions and sediments. In addition, spectra of the polypentapeptide in the solutions of increasing concentration and in the solid state were also investigated by gradually evaporating the water. Significant changes in band frequencies, intensities, and shapes were found for selected Raman bands in the measured spectra, particularly for the C-H stretching, the glycine CH(2) wagging, and some amide vibrations. The C-H stretching vibrations are influenced predominantly by the presence of water, the glycine CH(2) wagging vibrations are associated with conformational transitions. Three possible types of poly(GVGVP)s in the presence of water were indicated: polymer chains in a relatively extended state in the solution, a beta-spiral structure in the suspension, and irregularly bent chains in the sediment.     

Copper(II)-induced secondary structure changes and reduced folding stability of the prion protein

The cellular isoform of the prion protein PrP^C is a Cu²⁺-binding cell surface glycoprotein that, when misfolded, is responsible for a range of transmissible spongiform encephalopathies. As changes in PrP^C conformation are intimately linked with disease pathogenesis, the effect of Cu²⁺ ions on the structure and stability of the protein has been investigated. Urea unfolding studies indicate that Cu²⁺ ions destabilise the native fold of PrP^C. The midpoint of the unfolding transition is reduced by 0.73 ± 0.07 M urea in the presence of 1 mol equiv of Cu²⁺. This equates to an appreciable difference in free energy of unfolding (2.02 ± 0.05 kJ mol^− 1 at the midpoint of unfolding). We relate Cu²⁺-induced changes in secondary structure for full-length PrP(23-231) to smaller Cu²⁺ binding fragments. In particular, Cu²⁺-induced structural changes can directly be attributed to Cu²⁺ binding to the octarepeat region of PrP^C. Furthermore, a β-sheet-like transition that is observed when Cu ions are bound to the amyloidogenic fragment of PrP (residues 90-126) is due only to local Cu²⁺ coordination to the individual binding sites centred at His95 and His110. Cu²⁺ binding does not directly generate a β-sheet conformation within PrP^C; however, Cu²⁺ ions do destabilise the native fold of PrP^C and may make the transition to a misfolded state more favourable.     

Architecture of helix bundle membrane proteins: an analysis of cytochrome c oxidase from bovine mitochondria.

We have analyzed the structure of mitochondrial cytochrome c oxidase in terms of general characteristics thought to be important for describing the architecture of helix bundle membrane proteins. Many aspects of the structure are similar to what has previously been found for the photosynthetic reaction center and bacteriorhodopsin. Our results lead to a considerably more precise general picture of membrane protein architecture than has hitherto been possible to obtain.     

Complex structure of cytochrome c–cytochrome c oxidase reveals a novel protein–protein interaction mode

Mitochondrial cytochrome c oxidase (CcO) transfers electrons from cytochrome c (Cyt.c) to O₂ to generate H₂O, a process coupled to proton pumping. To elucidate the mechanism of electron transfer, we determined the structure of the mammalian Cyt.c–CcO complex at 2.0‐Å resolution and identified an electron transfer pathway from Cyt.c to CcO. The specific interaction between Cyt.c and CcO is stabilized by a few electrostatic interactions between side chains within a small contact surface area. Between the two proteins are three water layers with a long inter‐molecular span, one of which lies between the other two layers without significant direct interaction with either protein. Cyt.c undergoes large structural fluctuations, using the interacting regions with CcO as a fulcrum. These features of the protein–protein interaction at the docking interface represent the first known example of a new class of protein–protein interaction, which we term “soft and specific”. This interaction is likely to contribute to the rapid association/dissociation of the Cyt.c–CcO complex, which facilitates the sequential supply of four electrons for the O₂ reduction reaction.     

Investigation of molecular structure of bombesin and its modified analogues nonadsorbed and adsorbed on electrochemically roughened silver surface

This work describes the molecular structure of bombesin (BN) and its analogs on the basis of the absorption infrared and Raman results described below. In these analogues is replaced one ([D-Phe12]BN, [Tyr4]BN, and [Lys3]BN) or two ([Tyr4,D-Phe12]BN, [D-Phe12,Leu14]BN, and [Leu13-(R)-Leu14]BN) amino acid residues within the peptide chain with a synthetic amino acid, creating antagonists to bombesin, which are useful in the treatment of cancer. It is also used surface enhanced Raman scattering (SERS) to study the differences and changes in the vibrational spectra of BN and its analogs, which were attached to an electrochemically roughened silver surface as these peptides interacted with target proteins. This work explores the use of SERS for molecules anchored to a macroscopic silver surface to interrogate the interaction of these peptides with protein receptors. The results presented here show that all peptides coordinate to the macroscopic silver surface through an indole ring and the methylene group of Trp8, the C==O fragment, and an amide bond; however, the orientation of these fragments on the electrochemically roughened silver surface and the strength of the interactions with this surface is slightly different for each peptide. For example, the interaction of --CH2-- of [D-Phe12]BN, [Tyr4,D-Phe12]BN, [D-Phe12,Leu14]BN, [Leu13-(R)-Leu14]BN, and [Lys3]BN with the silver surface perturbed the vertical orientation of the Trp8 indole ring on this surface. Hence, the indole ring adopted a close to perpendicular orientation on the silver surface for BN and [Tyr4]BN, only.     

The structure and function of omega loop A replacements in cytochrome c.

The structural and functional consequences of replacing omega-loop A (residues 18-32) in yeast iso-1-cytochrome c with the corresponding loop of Rhodospirillum rubrum cytochrome c2 have been examined. The three-dimensional structure of this loop replacement mutant RepA2 cytochrome c, and a second mutant RepA2(Val 20) cytochrome c in which residue 20 was back substituted to valine, were determined using X-ray diffraction techniques. A change in the molecular packing is evident in the RepA2 mutant protein, which has a phenylalanine at position 20, a residue considerably larger than the valine found in wild-type yeast iso-1-cytochrome c. The side chain of Phe 20 is redirected toward the molecular surface, altering the packing of this region of omega-loop A with the hydrophobic core of the protein. In the RepA2(Val 20) structure, omega-loop A contains a valine at position 20, which restores the original wild-type packing arrangement of the hydrophobic core. Also, as a result of omega-loop A replacement, residue 26 is changed from a histidine to asparagine, which results in displacements of the main-chain atoms near residue 44 to which residue 26 is hydrogen bonded. In vivo studies of the growth rate of the mutant strains on nonfermentable media indicate that the RepA2(Val 20) cytochrome c behaves much like the wild-type yeast iso-1 protein, whereas the stability and function of the RepA2 cytochrome c showed a temperature dependence. The midpoint reduction potential measured by cyclic voltammetry of the RepA2 mutant is 271 mV at 25 degrees C. This is 19 mV less than the wild-type and RepA2(Val 20) proteins (290 mV) and may result from disruption of the hydrophobic packing in the heme pocket and increased mobility of omega-loop A in RepA2 cytochrome c. The temperature dependence of the reduction potential is also greatly enhanced in the RepA2 protein.     

The molecular structure of an unusual cytochrome c2 determined at 2.0 A; the cytochrome cH from Methylobacterium extorquens.

Cytochrome cH is the electron donor to the oxidase in methylotrophic bacteria. Its amino acid sequence suggests that it is a typical Class 1 cytochrome c, but some features of the sequence indicated that its structure might be of special interest. The structure of oxidized cytochrome cH has been solved to 2.0 A resolution by X-ray diffraction. It has the classical tertiary structure of the Class 1 cytochromes c but bears a closer gross resemblance to mitochondrial cytochrome c than to the bacterial cytochrome c2. The left-hand side of the haem cleft is unique; in particular, it is highly hydrophobic, the usual water is absent, and the "conserved" Tyr67 is replaced by tryptophan. A number of features of the structure demonstrate that the usual hydrogen bonding network involving water in the haem channel is not essential and that other mechanisms may exist for modulation of redox potentials in this cytochrome.     

Spectroscopic studies of molecular organization of antibiotic amphotericin B in monolayers and dipalmitoylphosphatidylcholine lipid multibilayers

Amphotericin B (AmB) is considered the gold-standard in the treatment of serious systemic mycoses despite its numerous adverse effects. Both the mechanism of antifungal action and the toxicity of this drug are dependent on its molecular organization. The effect of AmB on the organization of lipid membranes formed with dipalmitoylphosphatidylcholine (DPPC) was studied with application of the Langmuir-Blodgett technique and ATR-FTIR spectroscopy. The aim of this research was to analyze the physical interactions leading to the formation of aggregated forms of AmB molecules in one-component monolayers and lipid multibilayers. Analysis of FTIR spectra of two-component multibilayers suggests the possibility the mutual reorientation of the amino-sugar moiety (mycosamine) and macrolide ring. This effect may be significant in the explanation of the aggregation processes of AmB in biological systems.