Nucleotide sequence and physical map of kanamycin-resistant plasmid pUB110 from Staphylococcus aureus

The complete nucleotide sequence of Staphylococcus aureus plasmid pUB10 was determined. The sequence consists of 4545 b.p. and contains 64% A-T and 36% G-C pairs. pUB110 was found to contain four open reading frames, capable of coding for polypeptides having more than 80 amino acids. All the putative polypeptides are coded for by one DNA strand. The molecular weights of four putative polypeptides are (in kilodaltons): A-49.5; B-38.8; C-28.8 and D-9.5. Polypeptide C is involved in kanamycin resistance. Polypeptide B is, possibly, involved in pUB110 replication. No role has yet been established for polypeptides A and D, since deletions in their coding sequences have no detectable effect on any properties of pUB110 plasmid.     

Replication in yeasts of plasmid pE194 from Staphylococcus aureus

The ability of the plasmid pE194 from S. aureus to serve as an autonomously replicating sequence (ARS) in yeast was shown. The hybrid plasmid pLD744 that contains pE194 and the yeast LEU2 gene sequences is unstable in yeast like other YRp-vectors: the mitotic stability of the pLD744 was as much as 1%. The plasmid pLD712 that differs from pLD744 by the existence of a centromeric sequence from the chromosome III of yeast Saccharomyces cerevisiae reveals about one order greater stability. The observation that there are some sequences in the primary structure of the pE194 which strongly conform to the ARS consensus in yeast inclines us to infer that the existence of ARS consensus on pE194 DNA is not sufficient for its effective replication in yeast.     

Nucleotide sequence of the constitutive macrolide-lincosamide-streptogramin B resistance plasmid pNE131 from Staphylococcus epidermidis and homologies with Staphylococcus aureus plasmids pE194 and pSN2.

The complete nucleotide sequence of the Staphylococcus epidermidis plasmid pNE131 is presented. The plasmid is 2,355 base pairs long and contains two major open reading frames. A comparison of the pNE131 DNA sequence with the published DNA sequences of five Staphylococcus aureus plasmids revealed strong regional homologies with two of them, pE194 and pSN2. The region of pNE131 containing the reading frame which encodes the constitutive ermM gene is almost identical to the inducible ermC gene region of pE194, except for a 107-base-pair deletion which removes the mRNA leader sequence required for inducible expression. A second region of pNE131 contains an open reading frame with homology to the small cryptic plasmid pSN2 and potentially encodes a 162-amino-acid protein.     

Nucleotide sequence and expression of the beta-lactamase gene from Staphylococcus aureus plasmid pI258 in Escherichia coli, Bacillus subtilis, and Staphylococcus aureus.

The structural gene for beta-lactamase in the Staphylococcus aureus plasmid pI258 was cloned into a Staphylococcus aureus-Bacillus subtilis-Escherichia coli shuttle vector, pWN101, and the nucleotide sequence of the gene was determined. pWN101 was structurally stable and the beta-lactamase gene was expressed efficiently from its native promoter and ribosome-binding site in all three hosts.     

Nucleotide sequence and structural relationships of a chloramphenicol acetyltransferase encoded by the plasmid pSCS6 from Staphylococcus aureus

M. CARDOSO AND S. SCHWARZ. 1992. The 4.6 kb chloramphenicol resistance (Cm^R) plasmid, pSCS6, isolated from a naturally occurring Staphylococcus aureus biotype C encoded an inducible chloramphenicol acetyltransferase (CAT). The respective cat gene and its regulatory region were cloned. Sequence analyses revealed two open reading frames: one for a 9-amino acid leader peptide and the other for the 215-amino acid CAT monomer. Comparisons of the predicted CAT amino acid sequences revealed a high degree of similarity between CAT from pSCS6 and the CAT variants encoded by Cm^R plasmids of the pC221 family. These close structural relationships suggested an intraspecific exchange of Cm^R-determinants between Staph. aureus of human and bovine biotype.     

Nucleotide sequence and structural relationships of a chloramphenicol acetyltransferase encoded by the plasmid pSCS6 from Staphylococcus aureus.

The 4.6 kb chloramphenicol resistance (Cm) plasmid, pSCS6, isolated from a naturally occurring Staphylococcus aureus biotype C encoded an inducible chloramphenicol acetyltransferase (CAT). The respective cat gene and its regulatory region were cloned. Sequence analyses revealed two open reading frames: one for a 9-amino acid leader peptide and the other for the 215-amino acid CAT monomer. Comparisons of the predicted CAT amino acid sequences revealed a high degree of similarity between CAT from pSCS6 and the CAT variants encoded by Cm plasmids of the pC221 family. These close structural relationships suggested an intraspecific exchange of Cm-determinants between Staph. aureus of human and bovine biotype.     

Nucleotide sequence and functional map of pC194, a plasmid that specifies inducible chloramphenicol resistance.

The nucleotide sequence of pC194, a small plasmid from Staphylococcus aureus which is capable of replication in Bacillus subtilis, has been determined. The genetic determinant of chloramphenicol (CAM) resistance, which includes the chloramphenicol acetyl transferase (CAT) structural gene, the putative promoter and controlling element of this determinant, have been mapped functionally by subcloning a 1,035-nucleotide fragment which specifies the resistance phenotype using plasmid pBR322 as vector. Expression of CAM resistance is autogenously regulated since the 1,035-nucleotide fragment containing the CAT gene sequence and its promoter cloned into pBR322 expresses resistance inducibly in the Escherichia coli host. A presumed controlling element of CAT expression consists of a 37-nucleotide inverted complementary repeat sequence that is located between the -10 and ribosome-loading sequences of the CAT structural gene. Whereas the composite plasmid containing the minimal CAT determinant cloned in pBR322 could not replicate in B. subtilis, ability to replicate in B. subtilis was seen if the fragment cloned included an extension consisting of an additional 300 nucleotides beyond the 5' end of the single pC194 MspI site associated with replication. This 5' extension contained a 120-nucleotide inverted complementary repeat sequence similar to that found in pE194 TaqI fragment B which contains replication sequences of that plasmid. pC194 was found to contain four opening reading frames theoretically capable of coding for proteins with maximum molecular masses, as follows: A, 27,800 daltons; B, 26,200 daltons; C, 15,000 daltons; and D, 9,600 daltons. Interruption or deletion of either frame A or D does not entail loss of ability to replicate or to express CAM resistance, whereas frame B contains the CAT structural gene and frame C contains sequences associated with plasmid replication.     

Isolation and complementation of temperature-sensitive replication mutants of Staphylococcus aureus plasmid pC194

Temperature-sensitive replication (Tsr) mutants have been isolated from the Staphylococcus aureus plasmid pC194. For three of the four mutant plasmids tested (pSAO801, pSAO802, and pSAO804) the segregation kinetics suggested a complete block of plasmid replication at 43 degrees C. The replication defects of three mutant plasmids: pSAO802, pSAO803, and pSAO804 could be complemented by recombinant plasmids carrying a segment from either the wild type or the other mutant, pSAO801. There was no complementation when the segment carried by the recombinant plasmid was derived from one of the three complementable mutants. These data were taken as evidence for the involvement of a diffusible, plasmid-encoded product, RepH, in pC194 replication. The complementation of the fourth Tsr mutant, pSAO801, could not be tested due to an abnormal susceptibility of this mutant to the incompatibility expressed by recombinants carrying segments derived from pC194 or its mutants. A single mutation was found to be responsible for both pSAO801 instability and its altered incompatibility properties but the nature of the defect has not yet been elucidated.     

Cleavage maps of a tetracycline plasmid from Staphylococcus aureus

The cleavage maps of a Staphylococcus aureus plasmid, pSN1 (2.75 megadaltons), conferring tetracycline resistance, were determined. Cleavage maps are given for HpaI and HindIII restriction endonucleases by using the single HpaII site as a reference point. Nucleases EcoRI, BamHI, SalI, and HaeIII have no sites on this plasmid.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.     

Nucleotide sequence analysis of pRS1, a cryptic plasmid from Oenococcus oeni

A new cryptic plasmid, pRS1, from an Oenococcus oeni strain isolated from Spanish wines is reported. Nucleotide sequence analysis (2523 bp) revealed the presence of three major open reading frames (ORFs) whose nucleotide sequence and encoded proteins exhibit high homology with those of pOg32, a previously described plasmid of O. oeni. Common features in other plasmids from O. oeni (i.e., pLo13 and pOg32) have been found in pRS1. They have three major ORFs in the same strand; the putative encoded proteins by two of these ORFs exhibit homology with the replication (Rep) and the recombination (Pre) proteins, respectively, of the pT181 plasmid family and related gram-positive bacteria plasmids; these plasmids contain the DNA sequences required for plasmid replication by the rolling circle mechanism and for recombination (i.e., double-strand origin, DSO; single-strand origin, SSO; recombination-specific sites, RSA and RSB); and finally, all these plasmids have a third ORF of unknown function. These features suggest that pRS1 could constitute together with pLo13 and pOg32 a family of small cryptic plasmids of O. oeni.     

Nucleotide sequence of the epidermolytic toxin A gene of Staphylococcus aureus.

The nucleotide sequence of the eta gene, which codes for the epidermolytic toxin serotype A of Staphylococcus aureus TC16, is reported. The coding sequence of 840 nucleotides specifies a protein which, when secreted, has a predicted molecular weight of 26,950. The sequence of eta and the deduced amino acid sequence of the toxin have been compared with those of epidermolytic toxin serotype B. The coding sequences have 52% identical residues, and the polypeptides have 40% identical residues. Amino acid residues have been conserved in the areas of the proteins which correspond to major hydrophobic domains, whereas the regions likely to specify antigenic determinants occur in hydrophilic sequences that have diverged. The level of expression of epidermolytic toxin A in S. aureus 8325-4 was shown to be dependent on the integrity of a regulatory gene called agr.