Extraction and composition of polar lipids from the archaebacterium, Methanobacterium thermoautotrophicum: effective extraction of tetraether lipids by an acidified solvent

The usual Bligh and Dyer method could extract only a small part of the lipids of Methanobacterium thermoautotrophicum. When the water in the solvent was replaced by 5% trichloroacetic acid, the lipid recovery reached the maximum level, which was 6 times higher than that by the former method. The use of HCl (2 M) or disruption of cells was also effective but prolonged extraction with the HCl-containing solvent caused degradation of some phosphoglycolipids. Twenty-three spots of polar lipids were detected on a thin-layer chromatogram of the total lipid. These were 10 phospholipids (18%), 6 aminophospholipids (17%), 3 aminophosphoglycolipids (15%), 2 phosphoglycolipids (31%), and 2 glycolipids (19%). The predominant polar lipids were a highly polar phosphoglycolipid (PGL1, 30%) and a glycolipid (GL1a, 16%). The other major lipids included an aminophospholipid (PNL1a, 9%), and an aminophosphoglycolipid (PNGL1, 7%). The complete structure determination of PNL1a, GL1a, and PNGL1 is described in the accompanying paper. Acetolysis of the total lipids followed by acid methanolysis was required for the complete cleavage of polar head groups, releasing core residues of diphytanyl glycerol diether (C20 diether) and dibiphytanyl diglycerol tetraether (C40 tetraether). A densitometric assay of a thin-layer chromatogram showed that the ratio of C20 diether and C40 tetraether was 1:14. GLC analysis of alkyl chlorides prepared from the total lipid by BCl3 treatment showed that phytanyl (C20), biphytanyl (C40), and unidentified alkyl chains accounted for 10, 83, and 7 mol% of the total alkyl chains, respectively. Strong acid hydrolysis of the macromolecular residue obtained after lipid extraction gave a significant amount of C40 tetraether, which had probably been bound covalently to other substances in the cells.     

Structure determination of the UDP-disaccharide fragment of cytoplasmic cofactor isolated from Methanobacterium thermoautotrophicum

The methylcoenzyme M methylreductase reaction has an absolute requirement for 7-mercaptoheptanoylthreonine phosphate or component B, which is the active component of the intact molecule previously referred to as cytoplasmic cofactor. A hydrolytic fragment of cytoplasmic cofactor has been purified and identified as uridine 5'-(O-2-acetamido-2-deoxy-beta-manno-pyranuronosyl acid (1----4)-2-acetamido-2-deoxy-alpha-glucopyranosyl diphosphate) by high resolution NMR and fast atom bombardment mass spectro-metry. It is postulated that UDP-disaccharide may function to anchor 7-mercaptoheptanoyl threonine phosphate at the active site of the methyl-reductase enzyme complex.     

Structure of purified cytoplasmic cofactor from Methanobacterium thermoautotrophicum

The reduction of methylcoenzyme M to methane is known to require a heat stable and oxygen sensitive cofactor. Recently it has been shown that the active site of this cofactor is 7-mercaptoheptanoylthreonine phosphate. The present study shows that in the complete structure of this cofactor 7-mercaptoheptanoylthreonine phosphate is linked by pyrophosphate to two N-acetyl-glucosamine residues and an unidentified terminal group R with m/z 214. By fast-atom-bombardment mass spectrometry the intact cofactor, isolated as the mixed disulfide with 2-mercaptoethanol, was shown to have a molecular weight of 1084.5. The pyrophosphate bond is quite labile and undergoes hydrolysis or prolonged storage. This lability of the pyrophosphate bond may explain why the intact cofactor has not been isolated until now.     

Structure of two new aminophospholipids from Methanobacterium thermoautotrophicum.

The methanogenic bacterium Methanobacterium thermoautotrophicum (A.T.C.C. 29183) was shown to contain two new aminophospholipids. These are 2-aminoethyl phosphate ester of diphytanylglycerol diether and a sugar containing bisdiphytanyldiglycerol tetraether. The two aminophospholipids were stable to acid methanolysis except for the sugar on the bisdiphytanyldiglycerol tetraether. Strong acid (6 M-HCl) hydrolysed the alkyl ether and aminophosphate ester bonds. The structure of the phosphate linkage was demonstrated by 31P n.m.r., and the 2-ethanolamine structure was elucidated by 1H- and 13C-n.m.r. spectroscopy and by fast-atom-bombardment m.s.     

Tetrahydromethanopterin-dependent serine transhydroxymethylase from Methanobacterium thermoautotrophicum

Serine transhydroxymethylase of Methanobacterium thermoautotrophicum has been purified to within 95% of homogeneity. Activity was strictly dependent on tetrahydromethanopterin, tetrahydrofolate being unable to serve as the acceptor C₁ units from l-serine. The native protein has a molecular weight of about 102,000 daltons. The enzyme shows maximal activity at 60°C, has a pH optimum of 8.1, and required pyridoxal-5-phosphate and Mg²⁺ for optimal activity.     

High proportions of tetraether phospholipids in Methanobacterium thermoautotrophicum strain Hveragerdi measured by high performance liquid chromatography

Abstract The diether and tetraether lipids were isolated from the phospholipids of Methanobacterium thermoautotrophicum strain Hveragerdi. These membrane components were assayed by high performance liquid chromatography. The ratio of diether to tetraether lipids was 1:14 on a weight basis and represents the highest proportion of tetraether yet reported in a methanogenic bacterium. This data and the application of this method has relevance in microbial ecology and organic geochemistry where these chemical signatures may be used to assess the contributions of methane-forming bacteria to biological processes in natural environments.     

Solution structure of a novel calcium binding protein, MTH1880, from Methanobacterium thermoautotrophicum

MTH1880 is a hypothetical protein from Methanobacterium thermoautotrophicum, a target organism of structural genomics. The solution structure determined by NMR spectroscopy demonstrates a typical alpha + beta-fold found in many proteins with different functions. The molecular surface of the protein reveals a small, highly acidic pocket comprising loop B (Asp36, Asp37, Asp38), the end of beta2 (Glu39), and loop D (Ser57, Ser58, Ser61), indicating that the protein would have a possible cation binding site. The NMR resonances of several amino acids within the acidic binding pocket in MTH1880, shifted upon addition of calcium ion. This calcium binding motif and overall topology of MTH1880 differ from those of other calcium binding proteins. MTH1880 did not show a calcium-induced conformational change typical of calcium sensor proteins. Therefore, we propose that the MTH1880 protein contains a novel motif for calcium-specific binding, and may function as a calcium buffering protein.     

Isolation of a nucleotide activated disaccharide pentapeptide precursor from Methanobacterium thermoautotrophicum

The yeasts Pachysolen tannophilus and Pichia stipitis differed in their ability to utilize D-xylose in the presence of D-fructose. When P. tannophilus was grown aerobically in fructose-xylose mixture, the ketohexose was utilized preferentially over the pentose. However, in P. stipitis cultures, the converse was observed. The effect was associated with the ability of D-fructose to repress the induction of xylose reductase and xylitol dehydrogenase activities in P. tannophilus but not in P. stipitis. Both yeasts grew on D-fructose and fermented it to ethanol when it was supplied as the sole carbon source. The results suggest that there may exist some fundamental difference in the regulation of D-fructose metabolism between P. tannophilus and P. stipitis.     

Characterization of a superoxide dismutase gene from the archaebacterium Methanobacterium thermoautotrophicum

A gene encoding superoxide dismutase (SOD) was cloned from the archaebacterium Methanobacterium thermoautotrophicum, the first example from an anaerobic bacterium. The deduced amino acid sequence showed overall similarity to sequences of known Mn- and Fe-SODs from aerobic organisms. Judging from a detailed sequence comparison, the cloned SOD gene is classified as Mn-SOD. By comparison of Mn-SOD sequences among various species it was suggested that archaebacterial superoxide dismutase is a direct descendant of a primordial enzyme. Between a putative promoter and the start codon there is an inverted repeat sequence which is also found in the counterpart of Halobacterium halobium.     

Nickel,a component of factor F 430 from Methanobacterium thermoautotrophicum

Methanobacterium thermoautotrophicum, growing on medium supplemented with 2 mol ⁶³NiCl₂/l, was found to take up 1.2 mol ⁶³Ni per g cells (dry weight). More than 70% of the radioisotope was incorporated into a compound, which dissociated from the protein fraction after heat treatment, was soluble in 70% acetone, and could be purified by chromatography on QAE-Sephadex A-25, Sephadex G-25, and DEAE cellulose. The purified ⁶³Ni labelled compound had an absorption spectrum and properties identical to those of factor F ₄₃₀ and is therefore considered to be identical with factor F ₄₃₀.Factor F ₄₃₀, a compound of molecular weight higher than 1000 with an absorbance maximum at 430 nm, has recently been purified from Methanobacterium thermoautotrophicum (Gunsalus and Wolfe, 1978). The structure and function of this compound are not yet known.     

Isolation of lipid activated pseudomurein precursors from Methanobacterium thermoautotrophicum

From cell extracts of the pseudomurein possessing methanogen Methanobacterium thermoautotrophicum two putative pseudomurein precursors were isolated and characterized: (1) an undecaprenyl pyrophosphate activated disaccharide pentapeptide composed of N-acetylglucosamine, N-acetyltalosaminuronic acid, alanine, glutamic acid and lysine in a molar ratio of 1:1:2:2:1 and (2) the corresponding undecaprenyl pyrophosphate activated tetrapeptide lacking one alanine residue. The isolation of these precursors show that the biosynthesis of the eubacterial murein and the methano-bacterial pseudomurein differs not only in the cytoplasmic step, as recently described, but also in the lipid stage.Abbreviations GlcNitol glucosaminitol - NAcTalNUA N-acetyltalosaminuronic acid - Udp undecaprenol - TLC thin layer chromatography     

HMt, a histone-related protein from Methanobacterium thermoautotrophicum delta H.

HMt, a histone-related protein, has been isolated and characterized from Methanobacterium thermoautotrophicum delta H. HMt preparations contain two polypeptides designated HMt1 and HMt2, encoded by the hmtA and hmtB genes, respectively, that have been cloned, sequenced, and expressed in Escherichia coli. HMt1 and HMt2 are predicted to contain 68 and 67 amino acid residues, respectively, and have calculated molecular masses of 7,275 and 7,141 Da, respectively. Aligning the amino acid sequences of HMt1 and HMt2 with the sequences of HMf1 and HMf2, the subunit polypeptides of HMf, a histone-related protein from the hyperthermophile Methanothermus fervidus, revealed that 40 amino acid residues (approximately 60%) are conserved in all four polypeptides. In pairwise comparisons, these four polypeptides are 66 to 84% identical. The sequences and locations of the TATA box promoter elements and ribosome binding sites are very similar upstream of the hmtA and hmtB genes in M. thermoautotrophicum and upstream of the hmfA and hmfB genes in M. fervidus. HMt binding compacted linear pUC19 DNA molecules in vitro and therefore increased their electrophoretic mobilities through agarose gels. At protein/DNA mass ratios of < 0.2:1, HMt binding caused an increase in the overall negative superhelicity of relaxed, circular DNA molecules, but at HMt/DNA mass ratios of > 0.2:1, positive supercoils were introduced into these molecules. HMt and HMf are indistinguishable in terms of their abilities to compact and constrain DNA molecules in positive toroidal supercoils in vitro. Histone-related proteins with these properties are therefore not limited to reverse gyrase-containing hyperthermophilic species.     

Solution structure of the hypothetical protein Mth677 from Methanobacterium thermoautotrophicum: a novel alpha+beta fold

The structure of Mth677, a hypothetical protein from Methanobacterium thermoautotrophicum (Mth), has been determined by using heteronuclear nuclear magnetic resonance (NMR) methods on a double-labeled (15)N-(13)C sample. Mth677 adopts a novel alpha+beta fold, consisting of two alpha-helices (one N terminal and one C terminal) packed on the same side of a central beta-hairpin. This structure is likely shared by its three orthologs, detected in three other Archaebacteria. There are no clear features in the sequences of these proteins or in the genome organization of Mth to make a reliable functional assignment to this protein. However, the structural similarity to Escherichia coli MinE, the protein which controls that division occurs at the midcell site, lends support to the proposal that Mth677 might be, in Mth, the counterpart of the topological specificity domain of MinE in E. coli.     

DNA relatedness among some thermophilic members of the genus Methanobacterium: emendation of the species Methanobacterium thermoautotrophicum and rejection of Methanobacterium thermoformicicum as a synonym of Methanobacterium thermoautotrophicum.

DNA reassociation was used to determine levels of relatedness among four thermophilic Methanobacterium strains that are able to use formate and between these organisms and two representative strains of Methanobacterium thermoautotrophicum, strain delta HT (= DSM 1053T = ATCC 29096T) (T = type strain) and strain Marburg (= DSM 2133). Three homology groups were delineated, and these groups coincided with the clusters identified by antigenic fingerprinting. The first group, which had levels of cross hybridization that ranged from 73 to 99%, included M. thermoautotrophicum delta HT, Methanobacterium thermoformicicum Z-245, Methanobacterium sp. strain THF, and Methanobacterium sp. strain FTF. The second and third groups were each represented by only one strain, Methanobacterium sp. strain CB-12 and M. thermoautotrophicum Marburg, respectively (cross-hybridization levels, 13 to 30 and 29 to 33%, respectively). Our results indicate that the name M. thermoformicicum should be rejected as it is a synonym of M. thermoautotrophicum. The taxonomic positions of strains Marburg and CB-12 need further investigation.     

MTH187 from Methanobacterium thermoautotrophicum has three HEAT-like Repeats

With the completion of genome sequencing projects, there are a large number of proteins for which we have little or no functional information. Since protein function is closely related to three-dimensional conformation, structural proteomics is one avenue where the role of proteins with unknown function can be investigated. In the present structural project, the structure of MTH187 has been determined by solution-state NMR spectroscopy. This protein of 12.4 kDa is one of the 424 non-membrane proteins that were cloned and purified for the structural proteomic project of Methanobacterium thermoautotrophicum [Christendat, D., Yee, A., Dharamsi, A., Kluger, Y., Gerstein, M., Arrowsmith, C.H. and Edwards, A.M. (2000) Prog. Biophys. Mol. Biol., 73, 339–345]. Methanobacterium thermoautotrophicum is a thermophilic archaeon that grows optimally at 65 °C. A particular characteristic of this microorganism is its ability to generate methane from carbon dioxide and hydrogen [Smith, D.R., Doucette-Stamm, L.A., Deloughery, C., Lee, H., Dubois, J., Aldredge, T., Bashirzadeh, R., Blakely, D., Cook, R., Gilbert, K., Harrison, D., Hoang, L., Keagle, P., Lumm, W., Pothier, B., Qiu, D., Spadafora, R., Vicaire, R., Wang, Y., Wierzbowski, J., Gibson, R., Jiwani, N., Caruso, A., Bush, D., Reeve, J. N. et al. (1997) J. Bacteriol., 179, 7135–7155].Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users. Structure data have been deposited at PDB (1TE4) and NMR data at BMRB (5629).Olivier Julien and Isabelle Gignac - Both authors contributed equally to this work.     

Thermodynamic analysis of growth of Methanobacterium thermoautotrophicum

Growth of Methanobacterium thermoautotrophicum, an anaerobic archaebacterium using methanogenesis as the catabolic pathway, is characterized by large heat production rates, up to 13 W g⁻¹, and low biomass yields, in the order of 0.02 C‐mol mol⁻¹ H₂ consumed. These values, indicating a possibly “inefficient” growth mechanism, warrant a thermodynamic analysis to obtain a better understanding of the growth process. The growth‐associated heat production (Δ_rH) and the growth‐associated Gibbs energy dissipation per mol biomass formed (Δ_rG) were −3730 kJ C‐mol⁻¹ and −802 kJ C‐mol⁻¹, respectively. The Gibbs energy change found in this study is indeed unusually high as compared to aerobic methylotrophes, but not untypical for methanogens grown on CO₂. It explains the low biomass yield. Based on the information available on the energetic metabolism and on an ATP balance, the biomass yield can be predicted to be approximately in the range of the experimentally determined value. The fact that the exothermicity exceeds vastly even the Gibbs energy change can be explained by a dramatic entropy decrease of the catabolic reaction. Microbial growth characterized by entropy reduction and correspondingly by unusually large heat production may be called entropy‐retarded growth. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng 64: 74–81, 1999.     

The crystal structure of hypothetical protein MTH1491 from Methanobacterium thermoautotrophicum

As part of our structural proteomics initiative, we have determined the crystal structure of MTH1491, a previously uncharacterized hypothetical protein from Methanobacterium thermoautotrophicum. MTH1491 is one of numerous structural genomics targets selected in a genome-wide survey of uncharacterized proteins. It belongs to a family of proteins whose biological function is not known. The crystal structure of MTH1491, the first structure for this family of proteins, consists of an overall five-stranded parallel beta-sheet with strand order 51234 and flanking helices. The oligomeric form of this molecule is a trimer as seen from both crystal contacts and gel filtration studies. Analysis revealed that the structure of MTH1491 is similar to that of dehydrogenases, amidohydrolases, and oxidoreductases. Using a combination of sequence and structural analyses, we showed that MTH1491 does not belong to either the dehydrogenase or the amidohydrolase superfamilies of proteins.