Metal ion coordination to 2′ functionality of guanosine mediates substrate-guanosine coupling in group I ribozymes: implications for conserved role of metal ions and for variability in RNA folding in ribozyme catalysis

Divalent metal ions are necessary in the self splicing reaction of group I introns, and we report that metal interaction to the 2′ position of guanosine for the Azoarcus ribozyme is required for catalysis. Moreover, this metal coordination promotes the guanosine-substrate coupled binding to the ribozyme, which is another conserved feature seen across phylogenetic boundaries. Typically there is a 4-9-fold difference in binding of G to E_free versus E · S. In the Tetrahymena ribozyme’s case this substrate-guanosine communication was attributed to conformational change(s) that lead to cooperative binding of the two cofactors which is almost nonexistent at low temperatures (4 °C). In the prokaryotic Azoarcus ribozyme we also see a 4-5-fold difference in binding of the guanosine/substrate to E_free versus E · G or E · S at 10 °C that is attributed to guanosine-substrate coupling. This coupling is diminished when the metal (Mg²⁺) coordination to the 2′ is disrupted with use of 2′-amino-2′-deoxyguanosine. The coupling is restored when softer Mn²⁺ ions are added to the buffer. This evidence generalizes a model for group I ribozyme catalysis that involves metal coordination to the 2′ position of guanosine. However, we see one striking difference in that the guanosine-substrate coupling is reversed. In the Azoarcus system (10 °C) the guanosine/substrate binds 5-fold more tightly to E_free than to E · S or E · G, which is the opposite for Tetrahymena even when the later is run at 4 °C. One implication for this difference in coupling is that the Azoarcus is in a folded state well accommodated for guanosine or substrate binding. This initial binding actually causes a conformational change that retards the subsequent binding of the second cofactor, which contrasts what was found for the Tetrahymena ribozyme. These results indicate that while the role for the metal ions in the chemical catalysis is conserved across phylogenetic boundaries, there is variability in the folding pattern of the ribozyme that leads to phosphoryl transfer.     

Probing the Tetrahymena group I ribozyme reaction in both directions

The Tetrahymena L-21 ScaI ribozyme derived from the self-splicing group I intron catalyzes a reversible reaction analogous to the first step of self-splicing: CCCUCUA (S) + [UC]G right harpoon over left harpoon CCCUCU (P) + [UC]GA. To relate our understanding of the ribozyme to the self-splicing reaction and to further the mechanistic dissection of the ribozyme reaction, we have established a quantitative kinetic and thermodynamic framework for the forward and reverse reaction of the L-21 ScaI ribozyme under identical conditions. Examination of the framework shows that binding of products is cooperative with binding enhanced 5-fold, as was observed previously for binding of the substrates. Further, binding of UCGA is 12-fold weaker than binding of the unphosphorylated UCG, analogous to the 20-fold weaker binding of phosphorylated S relative to P; the molecular interactions underlying the stronger binding of UCG were traced to the 3'-hydroxyl group of UCG. The symmetrical effects on binding of substrates and products result in the equilibrium between ribozyme-bound species, K(int), that is essentially unperturbed from the solution equilibrium, K(ext) (K(int) = [E.P.UCGA]/[E.S.UCG] = 4.6 and K(ext) = [P][UCGA]/[S][UCG] = 1.9). Last, we show that the pK(a) values of the nucleophiles in the forward and reverse reactions are >/=10. This observation suggests that metal ion activation of the nucleophile and stabilization of the leaving group can only account for a portion of the rate enhancement of this ribozyme. These and prior results suggest that the Tetrahymena group I ribozyme, analogous to protein enzymes, uses multiple catalytic strategies to achieve its large rate enhancement.     

The role of metal ions in RNA catalysis

Understanding the catalytic mechanisms of RNA enzymes remains an important and intriguing challenge - one that has grown in importance since the recent demonstration that the ribosome is a ribozyme. At first, it seemed that all RNA enzymes compensate for the limited chemical versatility of ribonucleotide functional groups by recruiting obligatory metal ion cofactors to carry out catalytic chemistry. Mechanistic studies of the large self-splicing and pre-tRNA-processing ribozymes continue to support this idea, yielding increasingly detailed views of RNA active sites as scaffolds for positioning catalytic metal ions. Re-evaluation of the methodologies used to distinguish catalytic and structural roles for metal ions, however, has challenged this notion in the case of the small self-cleaving RNAs. Recent studies of the small ribozymes blur the distinction between catalytic and structural roles for metal ions, and suggest that RNA nucleobases have a previously unrecognized capacity for mediating catalytic chemistry.     

Trans-activation of the Tetrahymena group I intron ribozyme via a non-native RNA-RNA interaction

The peripheral P2.1 domain of the Tetrahymena group I intron ribozyme has been shown to be non-essential for splicing. We found, however, that separately prepared P2.1 RNA efficiently accelerates the 3' splice-site-specific hydrolysis reaction of a mutant ribozyme lacking both P2.1 and its upstream region in trans. We report here the unusual properties of this trans-activation. Compensatory mutational analysis revealed that non-native long-range base-pairings between the loop region of P2.1 RNA and L5c region of the mutant ribozyme are needed for the activation in spite of the fact that P2.1 forms base-pairings with P9.1 in the Tetrahymena ribozyme. The trans -activation depends on the non-native RNA-RNA interaction together with the higher order structure of P2.1 RNA. This activation is unique among the known trans-activations that utilize native tertiary interactions or RNA chaperons.     

Structural metals in the group I intron: a ribozyme with a multiple metal ion core

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg(2+) and K(+) ions. Five of the metals bind within 12 A of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.     

The 2'-hydroxyl group of the guanosine nucleophile donates a functionally important hydrogen bond in the tetrahymena ribozyme reaction

In the first step of self-splicing, group I introns utilize an exogenous guanosine nucleophile to attack the 5'-splice site. Removal of the 2'-hydroxyl of this guanosine results in a 10 (6)-fold loss in activity, indicating that this functional group plays a critical role in catalysis. Biochemical and structural data have shown that this hydroxyl group provides a ligand for one of the catalytic metal ions at the active site. However, whether this hydroxyl group also engages in hydrogen-bonding interactions remains unclear, as attempts to elaborate its function further usually disrupt the interactions with the catalytic metal ion. To address the possibility that this 2'-hydroxyl contributes to catalysis by donating a hydrogen bond, we have used an atomic mutation cycle to probe the functional importance of the guanosine 2'-hydroxyl hydrogen atom. This analysis indicates that, beyond its role as a ligand for a catalytic metal ion, the guanosine 2'-hydroxyl group donates a hydrogen bond in both the ground state and the transition state, thereby contributing to cofactor recognition and catalysis by the intron. Our findings continue an emerging theme in group I intron catalysis: the oxygen atoms at the reaction center form multidentate interactions that function as a cooperative network. The ability to delineate such networks represents a key step in dissecting the complex relationship between RNA structure and catalysis.     

A new metal ion interaction in the Tetrahymena ribozyme reaction revealed by double sulfur substitution

The Tetrahymena ribozyme is a metalloenzyme that catalyzes cleavage of oligonucleotide substrates by phosphoryl transfer. Thiophilic metal ions such as Mn2+, Zn2+ or Cd2+ rescue the >10(3)-fold inhibitory effect of sulfur substitution of the 3'-oxygen leaving group but do not effectively rescue the effect of sulfur substitution of the nonbridging pro-Sp phosphoryl oxygen. We now show that the latter effect can be fully rescued by Zn2+ or Cd2+ using a phosphorodithioate substrate, in which both the 3'-oxygen and the pro-Sp oxygen are simultaneously substituted with sulfur. These results provide the first functional evidence that metallophosphotransferases can mediate catalysis via metal ion coordination to both the leaving group and a nonbridging oxygen of the scissile phosphate.     

Probing the role of metal ions in the catalysis of Helicobacter pylori 3-deoxy-D-manno-octulosonate-8-phosphate synthase using a transient kinetic analysis

3-Deoxy-d-manno-2-octulosonate-8-phosphate (KDO8P) synthase catalyzes the net condensation of phosphoenolpyruvate and d-arabinose 5-phosphate to form KDO8P and inorganic phosphate (Pi). Two classes of KDO8P synthases have been identified. The Class I KDO8P synthases (e.g. Escherchia coli KDO8P synthase) catalyze the condensation reaction in a metal-independent fashion, whereas the Class II enzymes (e.g. Aquifex aeolicus) require metal ions for catalysis. Helicobacter pylori (H. pylori) KDO8P synthase, a Zn2+-dependent metalloenzyme, has recently been found to be a Class II enzyme and has a high degree of clinical significance since it is an attractive molecular target for the design of novel antibiotic therapy. Although the presence of a divalent metal ion in Class II KDO8P synthases is essential for catalysis, there is a paucity of mechanistic information on the role of the metal ions and functional differences as compared with Class I enzymes. Using H. pylori KDO8P synthase as a prototypical Class II enzyme, a steady-state and transient kinetic approach was undertaken to understand the role of the metal ion in catalysis and define the kinetic reaction pathway. Metal reconstitution experiments examining the reaction kinetics using Zn2+, Cd2+, Cu2+, Co2+, Mn2+, and Ni2+ yielded surprising results in that the Cd2+ enzyme has the greatest activity. Unlike Class-I KDO8P synthases, the Class II metallo-KDO8P synthases containing Zn2+, Cd2+, Cu2+, and Co2+ show cooperativity. This study presents the first detailed kinetic characterization of a metal-dependent Class II KDO8P synthase and offers mechanistic insight for how the divalent metal ions modulate catalysis through effects on chemistry as well as quaternary protein structure.     

The guanosine binding mechanism of the Tetrahymena group I intron.

The Tetrahymena group I intron catalyzes self-splicing through two consecutive transesterification reactions, using a single guanosine-binding site (GBS). In this study, we constructed a model RNA that contains the GBS and a conserved guanosine nucleotide at the 3'-terminus of the intron (omegaG). We determined by NMR the solution structure of this model RNA, and revealed the guanosine binding mechanism of the group I intron. The G22 residue, corresponding to omegaG, participates in a base triple, G22 xx G3 x C12, hydrogen-bonding to the major groove edge of the Watson-Crick G3 x C12 pair. The G22 residue also interacts with A2, which is semi-conserved in all sequenced group I introns.     

Identification of an active site ligand for a group I ribozyme catalytic metal ion

The transition state of the group I intron self-splicing reaction is stabilized by three metal ions. The functional groups within the intron substrates (guanosine and an oligoribonucleotide mimic of the 5'-exon) that coordinate these metal ions have been systematically defined through a series of metal ion specificity switch experiments. In contrast, the catalytic metal ligands within the ribozyme active site are unknown. In an effort to identify them, stereospecific (R(P) or S(P)) single-site phosphorothioate substitutions were introduced at five phosphates predicted to be in the vicinity of the catalytic center (A207, C208, A304, U305, and A306) within the Tetrahymena intron. Of the 10 ribozymes that were studied, four phosphorothioate substitutions (A207 S(P), C208 S(P), A306 R(P), and A306 S(P)) exhibited a significant reduction in the cleavage rate. Only the effect of the C208 S(P) phosphorothioate substitution could be significantly rescued by the addition of a thiophilic metal ion, either Mn(2+) or Zn(2+), when tested with an all-oxy substrate. The effect was not rescued with Cd(2+). To determine if one of the catalytic metal ions is coordinated to the C208 pro-S(P) oxygen, the phosphorothioate-substituted ribozymes were also assayed using oligonucleotide substrates with a 3'-phosphorothiolate or an S(P) phosphorothioate substitution at the scissile phosphate. This resulted in a second metal specificity switch, in that Mn(2+) or Zn(2+) no longer rescued the C208 S(P) ribozyme, but Cd(2+) provided efficient rescue in the context of either sulfur-containing substrate. The 3'-oxygen and the pro-S(P) oxygen of the scissile phosphate are both known to coordinate the same metal ion, M(A), which stabilizes the negative charge on the leaving group 3'-oxygen in the transition state. Taken together, these data suggest that metal M(A) is coordinated to the C208 pro-S(P) phosphate oxygen, which constitutes the first functional link between a specific catalytic metal ion and a particular functional group within the group I ribozyme active site.     

RNA splicing: group I intron crystal structures reveal the basis of splice site selection and metal ion catalysis

The group I intron has served as a model for RNA catalysis since its discovery 25 years ago. Four recently determined high-resolution crystal structures complement extensive biochemical studies on this system. Structures of the Azoarcus, Tetrahymena and bacteriophage Twort group I introns mimic different states of the splicing or ribozyme reaction pathway and provide information on splice site selection and metal ion catalysis. The 5'-splice site is selected by formation of a conserved G.U wobble pair between the 5'-exon terminus and the intron. The 3'-splice site is identified through stacking of three base triples, in which the middle triple contains the conserved terminal nucleotide of the intron, OmegaG. The structures support a two-metal-ion mechanism for group I intron splicing that might have corollaries to group II intron and pre-mRNA splicing by the spliceosome.     

A Pneumocystis carinii group I intron-derived ribozyme utilizes an endogenous guanosine as the first reaction step nucleophile in the trans excision-splicing reaction

In the trans excision-splicing reaction, a Pneumocystis carinii group I intron-derived ribozyme binds an RNA substrate, excises a specific internal segment, and ligates the flanking regions back together. This reaction can occur both in vitro and in vivo. In this report, the first of the two reaction steps was analyzed to distinguish between two reaction mechanisms: ribozyme-mediated hydrolysis and nucleotide-dependent intramolecular transesterification. We found that the 3'-terminal nucleotide of the ribozyme is the first-reaction step nucleophile. In addition, the 3'-half of the RNA substrate becomes covalently attached to the 3'-terminal nucleotide of the ribozyme during the reaction, both in vitro and in vivo. Results also show that the identity of the 3'-terminal nucleotide influences the rate of the intramolecular transesterification reaction, with guanosine being more effective than adenosine. Finally, expected products of the hydrolysis mechanism do not form during the reaction. These results are consistent with only the intramolecular transesterification mechanism. Unexpectedly, we also found that ribozyme constructs become truncated in vivo, probably through intramolecular 3'-hydrolysis (self-activation), to create functional 3'-terminal nucleotides.     

Specificity from steric restrictions in the guanosine binding pocket of a group I ribozyme

The 3' splice site of group I introns is defined, in part, by base pairs between the intron core and residues just upstream of the splice site, referred to as P9.0. We have studied the specificity imparted by P9.0 using the well-characterized L-21 Scal ribozyme from Tetrahymena by adding residues to the 5' end of the guanosine (G) that functions as a nucleophile in the oligonucleotide cleavage reaction: CCCUCUA5 (S) + NNG <--> CCCUCU + NNGA5. UCG, predicted to form two base pairs in P9.0, reacts with a (kcat/KM) value approximately 10-fold greater than G, consistent with previous results. Altering the bases that form P9.0 in both the trinucleotide G analog and the ribozyme affects the specificity in the manner predicted for base-pairing. Strikingly, oligonucleotides incapable of forming P9.0 react approximately 10-fold more slowly than G, for which the mispaired residues are simply absent. The observed specificity is consistent with a model in which the P9.0 site is sterically restricted such that an energetic penalty, not present for G, must be overcome by G analogs with 5' extensions. Shortening S to include only one residue 3' of the cleavage site (CCCUCUA) eliminates this penalty and uniformly enhances the reactions of matched and mismatched oligonucleotides relative to guanosine. These results suggest that the 3' portion of S occupies the P9.0 site, sterically interfering with binding of G analogs with 5' extensions. Similar steric effects may more generally allow structured RNAs to avoid formation of incorrect contacts, thereby helping to avoid kinetic traps during folding and enhancing cooperative formation of the correct structure.     

Modulation of individual steps in group I intron catalysis by a peripheral metal ion

Enzymes are complex macromolecules that catalyze chemical reactions at their active sites. Important information about catalytic interactions is commonly gathered by perturbation or mutation of active site residues that directly contact substrates. However, active sites are engaged in intricate networks of interactions within the overall structure of the macromolecule, and there is a growing body of evidence about the importance of peripheral interactions in the precise structural organization of the active site. Here, we use functional studies, in conjunction with published structural information, to determine the effect of perturbation of a peripheral metal ion binding site on catalysis in a well-characterized catalytic RNA, the Tetrahymena thermophila group I ribozyme. We perturbed the metal ion binding site by site-specifically introducing a phosphorothioate substitution in the ribozyme's backbone, replacing the native ligands (the pro-R (P) oxygen atoms at positions 307 and 308) with sulfur atoms. Our data reveal that these perturbations affect several reaction steps, including the chemical step, despite the absence of direct contacts of this metal ion with the atoms involved in the chemical transformation. As structural probing with hydroxyl radicals did not reveal significant change in the three-dimensional structure upon phosphorothioate substitution, the effects are likely transmitted through local, rather subtle conformational rearrangements. Addition of Cd(2+), a thiophilic metal ion, rescues some reaction steps but has deleterious effects on other steps. These results suggest that native interactions in the active site may have been aligned by the naturally occurring peripheral residues and interactions to optimize the overall catalytic cycle.     

Protein-metal ion interaction: volume effects produced by the interaction of proteins with metal ions.

The interaction of metal cations with single chain globular proteins produces volume increases, the magnitude of which is determined primarily by the ion and to a lesser extent by the protein. The cations are listed in ascending order of volume change: K(I) less than Mg(II) less than Sr(II) less than Ca(II) less than Co(II) less than Ni(II) less than Cd(II) less than Zn(II) less than Cu(II) less than Pb(II). This sequence held for all cation-protein systems investigated except for Cd(II) which produced a slightly larger volume effect than Zn(II) with lysozyme. The volume changes attributed to protein-cation interaction are positive and range from 8 ml/10(5) g of protein for the reaction on 0.05 M KNO3 with bovine plasma albumin to 2320 ml/10(5) g of protein produced by the 0.20 M Pb(NO3)2-myoglobin system. A similar classification scheme was not possible for the proteins. For example, volume increases of 45, 50, 80 and 95 ml/10(5) g of protein were produced when 0.05 M Mg(II) reacted with bovine serum albumin, ovalbumin, sperm whale myoglobin and lysozyme, respectively. However, when 0.2 M Pb(II) was the reactant the values were 1930, 846, 2320, and 1120 ml/10(5) g of protein. Volume effects produced by Cr(III), Al(III) and Fe(III) were determined, but the calculated results are considered dubious because the volume changes are a complicated function of protein-cation and protein-proton interaction.     

Protonated 2'-aminoguanosine as a probe of the electrostatic environment of the active site of the Tetrahymena group I ribozyme.

We have probed the electrostatic environment of the active site of the Tetrahymena group I ribozyme (E) using protonated 2'-aminoguanosine (), in which the 2'-OH of the guanosine nucleophile (G) is replaced by an group. At low concentrations of divalent metal ion (2 mM Mg(2+)), binds at least 200-fold stronger than G or G(NH)()2, with a dissociation constant of 相似文献   

New pathways in folding of the Tetrahymena group I RNA enzyme.

Previous studies have shown that the earliest detectable step in folding of the Tetrahymena ribozyme is tertiary structure formation of the peripheral element P5abc. This, along with other results, has suggested that P5abc may serve as a scaffold upon which additional tertiary structure is built. Herein we use the onset of oligonucleotide cleavage activity as a readout for native state formation and investigate the effect of P5abc on the rate of folding to the native structure. Despite the early folding of P5abc, its removal to give the E delta P5abc variant decreases the rate of attainment of an active structure less than fivefold (20-100 mM Mg2+, 15-50 degrees C). Furthermore, P5abc added in trans is able to bind the folded E delta P5abc ribozyme and promote oligonucleotide cleavage at least tenfold more rapidly than folding of the wild-type ribozyme, indicating that E delta P5abc does not have to first unfold before productively binding P5abc to form the true native state. This suggests that a state with the overall tertiary structure formed but with P5abc unfolded represents a viable on-pathway intermediate for the wild-type ribozyme. These results provide strong evidence for the existence of two pathways to the native state: in one pathway P5abc forms tertiary structure first, and in another it forms late. The pathway in which P5abc forms first is favored because P5abc can fold quickly and because its tertiary structure is stable in the absence of additional structured elements, not because P5abc formation is required for subsequent folding steps. In the course of these experiments, we also found that most of the ribozyme population does not reach the native state directly under standard conditions in vitro, but instead forms an inactive structure that is stable for hours. Finally, the fraction that does fold to the native state folds with a single rate constant of 1 min-1, suggesting that there are no significantly populated "fast-track" pathways that reach the native state directly by avoiding slow folding steps.