Detection of antigens on nitrocellulose paper immunoblots with monoclonal antibodies

A very sensitive method for the detection of antigen-antibody complexes on nitrocellulose paper immunoblots is described. The protein antigens are separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis followed by their electrophoretic transfer onto a nitrocellulose sheet (“Western blot”). The protein antigens bound to the nitrocellulose paper are exposed to the monoclonal antibody and the antibody-antigen complexes are detected on the paper by an immunoenzymatic reaction. The improved sensitivity of this method is the result of (i) the use of the detergent Tween 20 in blocking the nonspecific binding of the antibodies to the nitrocellulose paper, (ii) the use of a peroxidase-antiperoxidase (PAP) reaction, and (iii) the intensification of the diaminobenzidine reaction product with nickel and cobalt ions in phosphate buffer.     

A rapid,sensitive method for detection of alkaline phosphatase-conjugated anti-antibody on Western blots

A rapid, sensitive method has been developed to detect antibody-antigen complexes on “Western blots.” The methods of H. Towbin, T. Staehlin, and J. Gordon were used to separate and blot the antigens onto nitrocellulose. The remaining sites of attachment were blocked and the nitrocellulose was washed with polyoxyethylenesorbitan monolaurate (Tween 20). The blot was then reacted with the antiserum or hybridoma supernate to be tested. After the antigen-antibody reaction was completed, the blot was washed and treated with anti-antibody which has been conjugated to alkaline phosphatase. The alkaline phosphatase was detected by the reduction of the tetrazolium salt to diformazan by the hydrogen ions released in the formation of indigo by the reaction of the phosphatase on the indoxyl phosphate. The advantages of this method over previously described techniques are (1) use of Tween 20 allows the blot to be stained with Coomassie blue, (2) the substrates of the alkaline phosphatase reaction are stable for long periods of time, (3) the reaction products form an intense blue color which does not fade, (4) the resolution is extremely good with little to no band broadening, (5) the reaction is sensitive to picogram quantities of antigen, and (6) the reaction is quantitative.     

Real-time kinetic analysis of hCG-monoclonal antibody interaction using radiolabeled hCG probe: presence of two forms of Ag-mAb complex as revealed by solid phase dissociation studies

Real-time kinetics of ligand-ligate interaction has predominantly been studied by either fluorescence or surface plasmon resonance based methods. Almost all such studies are based on association between the ligand and the ligate. This paper reports our analysis of dissociation data of monoclonal antibody-antigen (hCG) system using radio-iodinated hCG as a probe and nitrocellulose as a solid support to immobilize mAb. The data was analyzed quantitatively for a one-step and a two-step model. The data fits well into the two-step model. We also found that a fraction of what is bound is non-dissociable (tight-binding portion (TBP)). The TBP was neither an artifact of immobilization nor does it interfere with analysis. It was present when the reaction was carried out in homogeneous solution in liquid phase. The rate constants obtained from the two methods were comparable. The work reported here shows that real-time kinetics of other ligand-ligate interaction can be studied using nitrocellulose as a solid support.     

Real-time kinetic analysis of hCG–monoclonal antibody interaction using radiolabeled hCG probe: presence of two forms of Ag–mAb complex as revealed by solid phase dissociation studies

Real-time kinetics of ligand–ligate interaction has predominantly been studied by either fluorescence or surface plasmon resonance based methods. Almost all such studies are based on association between the ligand and the ligate. This paper reports our analysis of dissociation data of monoclonal antibody-antigen (hCG) system using radio-iodinated hCG as a probe and nitrocellulose as a solid support to immobilize mAb. The data was analyzed quantitatively for a one-step and a two-step model. The data fits well into the two-step model. We also found that a fraction of what is bound is non-dissociable (tight-binding portion (TBP)). The TBP was neither an artifact of immobilization nor does it interfere with analysis. It was present when the reaction was carried out in homogeneous solution in liquid phase. The rate constants obtained from the two methods were comparable. The work reported here shows that real-time kinetics of other ligand–ligate interaction can be studied using nitrocellulose as a solid support.     

High-sensitivity protein detection by a new "contact-copy" method using a protein A-neomycin phosphotransferase II fusion protein

A new system for high-sensitivity protein detection by an immunoenzymatic "contact-copy" procedure is described. It is based on two components: (i) a microbiologically produced bifunctional fusion protein of protein A and neomycin phosphotransferase II (protein A-NPT II) in which the protein A moiety acts as a second immunological reagent while NPT II catalyzes the detection reaction and (ii) a novel kanamycin-loaded substrate matrix (kanamycin-cyanuric chloride-activated and sulfanilic acid-derivatized paper) brought into direct contact with a protein-carrying matrix after blot or dot application and initial immunoreaction--the NPT II enzyme reaction with [gamma-32P]ATP as cosubstrate leads to phosphorylation of the substrate kanamycin on the substrate matrix, which is used for further analysis. The contact-copy method has at least the same detection sensitivity as procedures employing 125I-protein A, but allows extremely short exposure times and avoids probe prelabeling. Twenty-five picograms of specific protein blotted from sodium dodecyl sulfate-polyacrylamide gels onto nitrocellulose is detected after 15 min of autoradiography. The limit of detection in dot tests was found to be 10 pg per dot (3 mm2). The method is suitable for quantitative determination of antigens in the range down to 100 pg. Several contact copies of the same original protein-carrying matrix can be produced and used for detection or quantitative analysis without destroying the original matrix.     

Detection of a species-specific antigen of Gardnerella vaginalis by Western blot analysis

Western blot analysis was used to identify antigenic components of Gardnerella vaginalis. Polypeptides bound to nitrocellulose membranes were probed with murine antisera raised to two strains of G. vaginalis, and antibody-antigen complexes were detected with 125I-labelled antimouse immunoglobulin followed by autoradiography. Although there was inter-strain variation in immunogenic polypeptide profiles, all 23 strains of G. vaginalis examined contained a common antigen of molecular mass 41 kDa. This antigen was not found in any of six other bacterial genera.     

Fluorescent labeling of nitrocellulose-bound proteins at the nanogram level without changes in immunoreactivity

Proteins blotted on nitrocellulose were stained with either 5-dimethylamino-1-naphthalene-sulfonylchloride (dansyl chloride) or fluorescein isothiocyanate. In both cases the staining procedure can be completed in less than 30 min. The sensitivity for detecting fluorescent-labeled proteins on nitrocellulose was 0.5 ng using a dot test. This was accomplished by transparentizing the nitrocellulose with either immersion oil or toluene. Dansylated proteins were successfully utilized for optimizing the electroblotting procedure. In the presence of 0.2% sodium dodecyl sulfate and 20% methanol the distribution of proteins on the nitrocellulose was an exact replica of the protein pattern seen in the polyacrylamide gel. The fluorescent labeling did not affect the antigenic properties of proteins allowing the subsequent probing with antisera. For this procedure, only one set of samples is needed to obtain accurate photographic records of the gel, the nitrocellulose blot, and the probed blot.     

Rapid quantitation of uncoupling protein in brown adipose tissue mitochondria by a dot immunobinding ("dot blot") procedure: application to the measurement of uncoupling protein in Richardson's ground squirrel, rats, and mice

A dot immunobinding ("dot blot") method for measuring uncoupling protein in brown adipose tissue mitochondria is described. Mitochondrial proteins were solubilized in sodium dodecyl sulfate and applied directly to a nitrocellulose membrane housed in a 96-well microfiltration manifold. Spare binding sites on the nitrocellulose membrane were blocked with bovine serum albumin and then anti-(uncoupling protein) serum was applied. The antigen-antibody complex was detected by the addition of 125I-labelled protein A. Each nitrocellulose "dot" was cut out and its radioactivity was counted. A calibration curve was constructed from purified uncoupling protein standards, taken through the entire procedure. The dot immunobinding method is sensitive (nanogram quantities of uncoupling protein), and in contrast to conventional radioimmunoassay and enzyme-linked immunosorbent assay procedures, it is also rapid and appears to be very robust. The method has been successfully applied to the measurement of uncoupling protein in brown adipose tissue mitochondria of Richardson's ground squirrel, rats, and mice.     

Development of a one-step immunochromatographic strip test using gold nanoparticles for the rapid detection of Salmonella typhi in human serum

An immunochromatographic strip test using gold nanoparticles was developed for the rapid detection of Salmonella typhi (S. typhi) in human serum. The strip test based on the principle of sandwich immunoassay by the specific binding of antigens from S. typhi O901 and antibody of S. typhi O901 on a nitrocellulose membrane. Antibody-gold nanoparticle conjugate was used as the label and was coated onto a glass fiber membrane, which was used as a conjugate pad. To create a test and control zone, antibody of S. typhi O901 and an anti-IgG were dotted on the nitrocellulose membrane, respectively. Positive samples were displayed as red dots at the test and control zones of the nitrocellulose membrane, while negative samples resulted in a red dot only in the control zone. The limit of detection (LOD) was found to be 1.14×10(5) cfu mL(-1), which could be visually detected by the naked eye within 15 min. This strip test provided a lower detection limit and analysis time than a dot blot immunoassay (8.88×10(6) cfu mL(-1) for LOD and 110 min for reaction time). In addition, our immunochromatographic strip test was employed to detect S. typhi in human serum effectively, with high accuracy. This strip test offers great promise for a rapid, simple and low-cost analysis of S. typhi.     

Profiling the expression of mitogen-induced T-cell proteins by using multi-membrane dot-blotting

High throughput technologies are standard methods for analysis of the proteome. Multi-layer multi-well plate dot-blotting system (MLDot) technology is a high-throughput dot blotting system that provides a simple, cost-effective approach for protein expression profiling in multiple samples. In contrast to traditional dot blot, MLDot uses a layered stack of thin, sieve-like membranes in place of a single nitrocellulose membrane. Therefore, up to 10 membranes can be prepared from the samples arrayed in a single 96-well plate. We describe the ability of MLDot to detect the predicted changes in protein expression following multiple mitogen treatment of T-cells. We compare the levels of the phopshorylated forms of CREB, Jun, and Akt in Jurkat T-cells as detected by MLDot to those measured by a gel-based assay. We also describe the ability of MLDot to detect differences in the levels of phosphorylated Akt in Jurkat cells as compared to primary lymphocytes.     

The use of gold reagents to quantitate antibodies eluted from nitrocellulose blots: application to electron microscopic immunocytochemistry

An assay is described in which gold reagents were used to quantitate nanogram amounts of antibody that had been eluted from antigens immobilized on nitrocellulose paper. Standard curves were generated by the application of rabbit immunoglobulin G (IgG) to nitrocellulose sheets assembled in a dot blot matrix apparatus. Blots were stained using either colloidal gold or immunogold, enabling quantitation of IgG concentration by scanning densitometry. Linear and reproducible standard curves were obtained. As little as 1 ng IgG/dot could be quantified using either gold reagent. In contrast to colloidal gold, immunogold could be used specifically to quantitate rabbit IgG regardless of the presence of bovine serum albumin or antigen coeluted from the nitrocellulose blot. The applicability of the immunogold assay was demonstrated by fractionating a complex rabbit antiserum raised against the RIM protein of frog retinal rod outer segments. Anti-RIM antibody was affinity-purified, quantitated by the immunogold assay, and subsequently employed in immunocytochemical studies using thin sections of retina embedded in a hydrophilic plastic, LR-Gold.     

Immunoaffinity layering enhances the sensitivity of antigen detection on nitrocellulose strips

A simple strategy to remarkably increase the sensitivity of detection of antigens applied as dot or western blot on nitrocellulose membrane using human serum albumin as model antigen has been described. This involves subjecting the antigen bearing nitrocellulose strips to multiple incubation cycles with primary antibody and enzyme conjugated secondary antibody prior to staining for enzyme activity. The sensitivity of detection could be increased up to a thousand fold after three incubation cycles. Aggregation of human serum albumin could be detected by the multiple incubation procedure at very low protein concentration after electrophoresis and transfer onto nitrocellulose.     

Multimembrane dot-blotting: a cost-effective tool for proteome analysis

The molecular profiles of protein expression from hundreds of cell lysates can be determined in a high-throughput manner by using fluorescent bead technologies, enzyme-linked immunosorbent assays (ELISAs), and protein microarrays. Although powerful, these tools are costly and technically challenging and thus have limited accessibility for many research groups. We propose a modification of traditional dot blotting that increases throughput of this approach and provides a simple and cost-effective technique for profiling multiple samples. In contrast to traditional blotting that uses a single membrane, we introduce blotting onto a stack of novel, thin, sieve-like membranes. These membranes have a high affinity for binding proteins, but have a lower capacity of protein binding compared to traditional (nitrocellulose) membranes. We compare the linear binding capacity and variability of these novel membranes with nitrocellulose membranes. Also, we describe the use of these membranes in a multilayer dot blot format for profiling mitogen-mediated signal transduction pathways in T cells.     

Detection of the low density lipoprotein (LDL) receptor on nitrocellulose paper with colloidal gold-LDL conjugates

Gold-low density lipoprotein (LDL) conjugates were used to detect the LDL receptor on nitrocellulose paper. Solubilized rat liver membrane proteins were subjected to electrophoresis and electroblotted onto nitrocellulose paper. The receptor was then detected as a red band (within 10 min) by overlaying with the LDL conjugates. The coloration was prevented by unlabeled LDL, EDTA, and suramin but not by unlabeled HDL3. In the dot blot assay, detection with the colloidal gold-LDL conjugates was as sensitive as both the autoradiographic method with 125I-labeled LDL and the biotinylated LDL method; the estimated limit of detection by scanning densitometry was 1.6 femtomoles of receptor protein. When the coloration obtained with the colloidal gold-LDL conjugates was intensified by photochemical silver staining, down to 200 attomoles of the LDL receptor could be detected. In this assay, the EDTA-sensitive binding of colloidal gold-LDL to solubilized hepatic membrane proteins was 12 times higher for rats treated with 17 alpha-EE than for normal rats. The use of colloidal gold-LDL conjugates is therefore a very easy, safe, inexpensive, fast and sensitive method for the detection of the LDL receptor on nitrocellulose paper. Furthermore, with silver staining and scanning densitometry, the colloidal gold-LDL conjugates could be used in a dot blot assay to quantify tissue and cell LDL receptors down to attomolar levels.     

Characterization of immune complex components by dot blot analysis.

A method is described for the characterization of immune complex components by dot blot analysis. After isolation by chromatographic techniques and precipitation with polyethylene glycol, immune complexes were dissociated in 0.1 M phosphate (pH 2) and bound to a nitrocellulose membrane in a dot blot unit. Biotinylated probes were then used to identify the following immune complex components: specific antigens, biologically active antibodies, antibody isotypes, antibody subclasses, antibody idiotypes, and rheumatoid factors. This nonradioactive procedure takes less than 2 h to perform and has been used to analyze immune complexes isolated from sera (rabbit and human) and synovial fluid (human).     

Staining of proteins on SDS polyacrylamide gels and on nitrocellulose membranes by Alta, a colour used as a cosmetic

We describe here the use of Alta, a pre-existing scarlet-red stain of cosmetic use, for staining proteins on sodium dodecyl sulfate (SDS) polyacrylamide gels, as well as for a single step staining of gels and nitrocellulose membranes during Western blot analysis. This stain, which is composed of 0.8% Crocein scarlet (brilliant crocein) and 0.2% Rhodamine B, is inexpensive, easy to use and nearly as sensitive as Coomassie Brilliant Blue (CBB) R-250. The gels can be stained in 10% Alta (2 h) and can be destained effectively only with 7% acetic acid as opposed to the conventional destainer (methanol/acetic acid/water) required for CBB-stained gels. In an alternative procedure, the proteins can be stained on the gel while electrophoresis by simply using 5% Alta in the top tank buffer and the stain can be viewed under UV-transilluminator. This procedure can also be used for Western blot analysis, as a single step procedure for staining of proteins on the gel as well as on the nitrocellulose membrane, as the stain is retained on the membrane after protein transfer. Thus, this staining procedure allows monitoring of proteins after each step in the Western blot, thereby eliminating the need to run separate gels for staining and Western blot analysis, and also the need for Ponceau Red S staining of the nitrocellulose membrane during Western blot analysis.     

Immunodetection of nitrocellulose-adhesive proteins at the nanogram level after trinitrophenyl modification

A method for protein detection on nitrocellulose membranes based on modification with 2,4,6-trinitrobenzenesulfonic acid and reaction with anti-trinitrophenyl (TNP) serum as first antibody followed by peroxidase-conjugated second antibody is described. Protein quantities between 1 and 3 ng can be detected in the dot test. This method was used in a double immunodetection procedure after electrophoretic transfer of proteins localizing first a distinct antigen with its specific antiserum followed by visualization of the complete protein pattern on the same blot by the TNP/anti-TNP method as described above. As only water-soluble reagents are employed no shrinkage of the membrane occurs. Furthermore, the method can be used in a simultaneous immunodetection procedure visualizing the specific antigen together with TNP marker proteins using a mixture of the specific antiserum and the anti-TNP serum as first antibody.     

Determining proteome-wide expression levels using reverse protein arrays in fission yeast

Global protein expression profiling of various mutants or growth conditions is currently a major challenge in biology. Here we provide a protocol for a strategy that we recently developed that couples ORFeome-based (ORF denotes open reading frame) expression to reverse protein arrays; this approach accurately quantifies more than 99% of the predicted fission yeast proteins in various genetic backgrounds. The first stage of this two-stage protocol requires mass mating between any fertile fission yeast mutant of interest and the integrated fission yeast-tagged ORFeome followed by selection of recombinant haploids. The second stage of the protocol, called reverse protein arrays, involves simple large-scale extraction of total proteins, which are then spotted on nitrocellulose membranes for detection by quantitative dot blot. When handled manually, the entire protocol takes about 2 months. However, the process could easily be automated and should also be applicable to other organisms.     

Demonstration of a high density lipoprotein (HDL)-binding protein in Hep G2 cells using colloidal gold-HDL conjugates

Solubilized membrane proteins of Hep G2 cells were electrophoretically separated on polyacrylamide gels and electrotransferred onto nitrocellulose paper. Overlaying the nitrocellulose with human high density lipoproteins conjugated to colloidal gold revealed the presence of a single protein band with an apparent molecular mass of 80 kDa. Binding of the conjugates to this protein was specific for high density lipoproteins in as much as it was effectively displaced by an excess of unlabelled high density lipoproteins but not by a similar excess of unlabelled low density lipoproteins. Binding was not dependent on Ca²⁺ as 10 mM EDTA had no effect. The binding activity of the solubilized membranes was increased by incubating the cells with non-lipoprotein cholesterol. This was detected on electroblots and quantified with a new dot blot assay using the colloidal gold-high density lipoprotein conjugates.     

Analysis of the effectiveness of reused primary and secondary antibodies in Western blotting analysis

Western blot analysis is a common technique for detecting a target protein on a nitrocellulose membrane. The target protein is detected using specific antibodies. The positive signal can be visualized either by chemiluminescence or by a colorimetric reaction. Some specific antibodies can be produced in-house in high amounts and can be used without considering costs. However many antibodies (especially antibodies for detection tag fused proteins) must be purchased from a company. Unfortunately most of them are very expensive. Here we report the effectiveness of different antibodies after reusing them several times and also compare the influence of different storage conditions.