Mechanical properties of cytoskeletal polymers

The mechanical properties of cytoplasm are dominated by microfilaments, microtubules, and intermediate filaments, collectively termed the cytoskeleton. This review discusses how the physical properties of these biopolymer systems are related to their molecular structures and interactions, and how remodelling of these biopolymers in vivo affects cell shape and motility.     

Energetics of cell-cell and cell-biopolymer interactions

The energy vs distance balance of cell suspensions (in the presence and in the absence of extracellular biopolymer solutions) is studied, not only in the light of the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory (which considered just the electrostatic (EL) and Lifshitz-van der Waals (LW) interactions), but also by taking electron-acceptor/electron-donor, or Lewis acid-base (AB) and osmotic (OS) interactions into account. Since cell surfaces, as well as many biopolymers tend to have strong monopolar electron-donor properties, they are able to engage in a strong mutual AB repulsion when immersed in a polar liquid such as water. The effects of that repulsion have been observed earlier in the guise of hydration pressure. The AB repulsion is, at close range, typically one or two orders of magnitude stronger than the EL repulsion, but its rate of decay is much steeper. In most cases, AB interactions are quantitatively the dominant factor in cell stability (when repulsive) and in "hydrophobic interactions" (when attractive). OS interactions exerted by extracellularly dissolved biopolymers are weak, but their rate of decay is very gradual, so OS repulsions engendered by biopolymer solutions may be of importance in certain long-range interactions. OS interactions exerted by biopolymers attached to cells or particles (e.g., by glycocalix glycoproteins), are very short-ranged and usually are negligibly small in comparison with the other interaction forces, in aqueous media.     

Energetics of cell-cell and cell-biopolymer interactions

The energy vs distance balance of cell suspensions (in the presence and in the absence of extracellular biopolymer solutions) is studied, not only in the light of the classical Derjaguin-Landau-Verwey-Over-beek (DLVO) theory (which considered just the electrostatic (EL) and Lifshitz-van der Waals (LW) interactions), but also by taking electron-acceptor/electron-donor, or Lewis acid-base (AB) and osmotic (OS) interactions into account. Since cell surfaces, as well as many biopolymers tend to have strong monopolar electron-donor properties, they are able to engage in a strong mutual AB repulsion when immersed in a polar liquid such as water. The effects of that repulsion have been observed earlier in the guise of hydration pressure. The AB repulsion is, at close range, typically one or two orders of magnitude stronger than the EL repulsion, but its rate of decay is much steeper. In most cases, AB interactions are quantitatively the dominant factor in cell stability (when repulsive) and in “hydrophobic interactions” (when attractive). OS interactions exerted by extracellularly dissolved biopolymers are weak, but their rate of decay is very gradual, so OS repulsions engendered by biopolymer solutions may be of importance in certain long-range interactions. OS interactions exerted by biopolymers attached to cells or particles (e.g., by glycocalix glycoproteins), are very short-ranged and usually are negligibly small in comparison with the other interaction forces, in aqueous media.     

Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate)-based biopolymer systems

Biodegradable biopolymers attract much attention in biology and medicine due to its wide application. The present review considers a biodegradable and biocompatible polymer of bacterial origin, poly(3-hydroxybutyrate), which has wide perspectives in medicine and pharmaceutics. It highlights basic properties of biopolymer (biodegradability and biocompatibility) and also biopolymer systems: various materials, devices and compositions based on the biopolymer. Application of poly(3-hydroxybutyrate)-based biopolymer systems in medicine as surgical implants, in bioengineering as cell culture scaffolds, and in pharmacy as novel drug dosage forms and drug systems are also considered.     

Properties of complexes of galactomannan of Leucaena leucocephala and Al3+, Cu2+ and Pb2+

The use of biopolymers in many industrial processes is on the increase. The different interactions of biopolymers and electrolytes either in aqueous solutions or in solid state provide different physico-chemical properties and a simple correlation cannot be established. In this study, in order to determine the properties of the complexes of galactomannan of Leucaena leucocephala (gal) with the metal ions Al3+ and Pb2+, toxic elements and Cu2+, essential, the logs of the binding constants of the complexes formed in the aqueous solutions were calculated. Their rheological properties, their thermal behavior, the infrared characteristics and shape and form of the films formed by those complexes in solid state were also determined. The aqueous solutions properties have shown a better complexation between gal and Al3+. The species distribution diagrams have shown an existence of complex species going from acidic to basic pH values. Infrared spectra have proved the complexations as well as the viscosity studies. Thermal stabilities in general were smaller in the complexed species than in the native biopolymers and the films obtained from aqueous solutions showed for Cu2+ the most different morphology compared to the biopolymer itself. A use can be suggested of this biopolymer in environmental remediations besides its already established industrial uses.     

Binding of cationic surfactants to DNA, protein and DNA-protein mixtures

Extent of binding (gamma 2(1)) of cationic surfactants cetyltrimethyl ammonium bromide (CTAB), myristyltrimethyl ammonium bromide (MTAB) and dodecyl trimethyl ammonium bromide (DTAB) to calf-thymus DNA, bovine serum albumin (BSA) and to their binary mixture respectively have been measured as function of bulk concentration of the surfactant by using equilibrium dialysis technique. Binding of CTAB has been studied at different pH, ionic strength (mu), temperature and biopolymer composition and with native and denatured states of the biopolymers. The chain-length of different long chain amines plays a significant role in the extent of binding under identical solution condition. The binding ratios for CTAB to collagen, gelatin, DNA-collagen and DNA-gelatin mixtures respectively have also been determined. The conformational structures of different biopolymers are observed to play significant role in macromolecular interactions between protein and DNA in the presence of CTAB. From the experimental values of the maximum binding ratio (gamma 2m) at the saturation level for each individual biopolymer, ideal values (gamma 2m)id have been theoretically calculated for binary mixtures of biopolymers using additivity rule. The protein-DNA-CTAB interaction in mixture has been explained in terms of the deviation (delta) of (gamma 2m) from (gamma 2m)id in the presence of a surfactant in bulk. The binding of surfactants to biopolymers and to their binary mixtures are compared more precisely in terms of the Gibbs' free energy decrease (-delta G degree) for the saturation of the binding sites in the biopolymers or biopolymer mixtures with the change of the bulk surfactant activity from zero to unity in the rational mole fraction scale.     

Empirical modeling of batch fermentation kinetics for poly(glutamic acid) production and other microbial biopolymers

An empirical kinetic model is proposed for the batch production of poly(glutamic acid) from Bacillus subtilis IFO 3335. In addition, the proposed model was used to fit the kinetic data of poly(glutamic acid) production from other bacterial strains using different media, as well as kinetic data from different strains for the production of the exocellular biopolymers dextran, hyaluronic acid, xanthan, alginate, and the endocellular biopolymer polyhydroxybutyrate. The empirical model treats the biopolymer as a component of the biomass and fits the experimental biomass data using a sigmoidal relationship that includes the maximum specific growth rate, mu(max), and the substrate saturation parameter, K(S). An empirical parameter, the relative coefficient (r), quantifies, in relative terms, the degree of nongrowth-associated biopolymer formation.     

Solubilization of enzymes and nucleic acids in hydrocarbon micellar solutions

The present state of the field of biopolymers solubilized in apolar solvents via reverse micelles is reviewed. First, an extensive discussion of the physical and chemical properties of reverse micelles is presented. Particular attention is devoted to the nature of water in the water pools of reverse micelles; to the structure and shape of the micellar aggregates; and to the dynamic properties of the reverse micelles. In the second part of the paper, the mechanism of solubilization of proteins and nucleic acids in hydrocarbon reverse micelles is discussed. Spectroscopic data, mostly circular dichroism and fluorescence, are reviewed in order to clarify the conformational changes which the biopolymers undergo upon their uptake into the micellar environment and determine the location of the biopolymers inside the reverse micelles. Data from neutron scattering, light scattering, ultracentrifugation, and electron microscopy of the protein-containing micelles are reviewed and discussed with the aim of illustrating the structure of the micellar aggregates containing the biopolymer as guest molecules. The activity of enzymes and nucleic acids is discussed, with emphasis on the influence upon the chemical reactivity brought about by the micellar parameters. Finally, a brief review of the applications and potentialities of biopolymer-containing reverse micelles is presented.     

Large changes in cytoplasmic biopolymer concentration with osmolality indicate that macromolecular crowding may regulate protein-DNA interactions and growth rate in osmotically stressed Escherichia coli K-12

From determination of amounts and concentrations of biopolymers and solutes in the cytoplasm of Escherichia coli, we are obtaining information needed to assess the effect of macromolecular crowding on cytoplasmic properties and processes of osmotically stressed bacteria. We observe that growth rate, and the amount of cytoplasmic water decrease and cytoplasmic concentrations of biopolymers and K+, increase with increasing osmolality, even for cells grown in the presence of osmoprotectants like glycine betaine. We observe general correlations between the amount of cytoplasmic water, growth rate and cytoplasmic K+ concentration in osmotically stressed cells grown both with and without osmoprotectants. To explain these correlations, we propose that crowding increases with increasing growth osmolality, which in turn buffers the binding of proteins to nucleic acids against changes in cytoplasmic K+ concentration and (by affecting biopolymer diffusion rates and/or assembly equilibria) is a determinant of growth rate of osmotically stressed cells. Changes in biopolymer concentration and crowding may also explain the increase of the activity coefficient of cytoplasmic water with increasing osmolality of growth in E. coli.     

Equilibrium Modeling of the Mechanics and Structure of the Cancer Glycocalyx

The glycocalyx is a thick coat of proteins and carbohydrates on the outer surface of all eukaryotic cells. Overproduction of large, flexible or rod-like biopolymers, including hyaluronic acid and mucins, in the glycocalyx strongly correlates with the aggression of many cancer types. However, theoretical frameworks to predict the effects of these changes on cancer cell adhesion and other biophysical processes remain limited. Here, we propose a detailed modeling framework for the glycocalyx incorporating important physical effects of biopolymer flexibility, excluded volume, counterion mobility, and coupled membrane deformations. Because mucin and hyaluronic biopolymers are proposed to extend and rigidify depending on the extent of their decoration with side chains, we propose and consider two limiting cases for the structural elements of the glycocalyx: stiff beams and flexible chains. Simulations predict the mechanical response of the glycocalyx to compressive loads, which are imposed on cells residing in the highly confined spaces of the solid tumor or invaded tissues. Notably, the shape of the mechanical response transitions from hyperbolic to sigmoidal for more rod-like glycocalyx elements. These mechanical responses, along with the corresponding equilibrium protein organizations and membrane topographies, are summarized to aid in hypothesis generation and the evaluation of future experimental measurements. Overall, the modeling framework developed provides a theoretical basis for understanding the physical biology of the glycocalyx in human health.     

Indices of biopolymer metabolism in connective tissue during repeated stress

Experiments on rats have shown that daily strong stress actions (immobilization) brought about the marked increase in the 11-oxycorticosteroid level and indices of the biopolymer exchange in the connective tissue (free oxyproline, glycosaminoglycanes, sialic acids). Under the acupuncture action (weak stresses) all the above indices were changed mainly after the first influence. Preliminary acupuncture stimulations prevent deep changes in the exchange of biopolymers in the connective tissue, developing under strong stresses.     

Effects of non-linearity on cell–ECM interactions

Filamentous biopolymers such as F-actin, vimentin, fibrin and collagen that form networks within the cytoskeleton or the extracellular matrix have unusual rheological properties not present in most synthetic soft materials that are used as cell substrates or scaffolds for tissue engineering. Gels formed by purified filamentous biopolymers are often strain stiffening, with an elastic modulus that can increase an order of magnitude at moderate strains that are relevant to cell and tissue deformation in vivo. This review summarizes some experimental studies of non-linear rheology in biopolymer gels, discusses possible molecular mechanisms that account for strain stiffening, and explores the possible relevance of non-linear rheology to the interactions between cell and extracellular matrices.     

Spectral analysis methods for the robust measurement of the flexural rigidity of biopolymers

The mechanical properties of biopolymers can be determined from a statistical analysis of the ensemble of shapes they exhibit when subjected to thermal forces. In practice, extracting information from fluorescence microscopy images can be challenging due to low signal/noise ratios and other artifacts. To address these issues, we develop a suite of tools for image processing and spectral data analysis that is based on a biopolymer contour representation expressed in a spectral basis of orthogonal polynomials. We determine biopolymer shape and stiffness using global fitting routines that optimize a utility function measuring the amount of fluorescence intensity overlapped by such contours. This approach allows for filtering of high-frequency noise and interpolation over sporadic gaps in fluorescence. We use benchmarking to demonstrate the validity of our methods, by analyzing an ensemble of simulated images generated using a simulated biopolymer with known stiffness and subjected to various types of image noise. We then use these methods to determine the persistence lengths of taxol-stabilized microtubules. We find that single microtubules are well described by the wormlike chain polymer model, and that ensembles of chemically identical microtubules show significant heterogeneity in bending stiffness, which cannot be attributed to sampling or fitting errors. We expect these approaches to be useful in the study of biopolymer mechanics and the effects of associated regulatory molecules.     

Studies on surfactant-biopolymer interaction. I. Microcalorimetric investigation on the interaction of cetyltrimethylammonium bromide (CTAB) and sodium dodecylsulfate (SDS) with gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA)

The interaction of the surfactants cetyltrimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) with the biopolymers gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA) was studied by isothermal titration microcalorimetry at varied biopolymer concentration, pH and temperature. The nature of interaction of the surfactants with the biopolymers was assessed from the observed enthalpy-[surfactant] profiles. The biopolymer-induced aggregation of the surfactants was observed. The enthalpies of aggregation of amphiphiles, binding of aggregates with macromolecules, organisational change of bound aggregates, and threshold concentrations for micelle formation of surfactants in the presence of biopolymers were estimated. The results collected on the three biopolymers were analysed and compared.     

A teleonomic model describing performance (body, milk and intake) during growth and over repeated reproductive cycles throughout the lifespan of dairy cattle. 1. Trajectories of life function priorities and genetic scaling

The prediction of the control of nutrient partitioning, particularly energy, is a major issue in modelling dairy cattle performance. The proportions of energy channelled to physiological functions (growth, maintenance, gestation and lactation) change as the animal ages and reproduces, and according to its genotype and nutritional environment. This is the first of two papers describing a teleonomic model of individual performance during growth and over repeated reproductive cycles throughout the lifespan of dairy cattle. The conceptual framework is based on the coupling of a regulating sub-model providing teleonomic drives to govern the work of an operating sub-model scaled with genetic parameters. The regulating sub-model describes the dynamic partitioning of a mammal female's priority between life functions targeted to growth (G), ageing (A), balance of body reserves (R) and nutrient supply of the unborn (U), newborn (N) and suckling (S) calf. The so-called GARUNS dynamic pattern defines a trajectory of relative priorities, goal directed towards the survival of the individual for the continuation of the specie. The operating sub-model describes changes in body weight (BW) and composition, foetal growth, milk yield and composition and food intake in dairy cows throughout their lifespan, that is, during growth, over successive reproductive cycles and through ageing. This dynamic pattern of performance defines a reference trajectory of a cow under normal husbandry conditions and feed regimen. Genetic parameters are incorporated in the model to scale individual performance and simulate differences within and between breeds. The model was calibrated for dairy cows with literature data. The model was evaluated by comparison with simulations of previously published empirical equations of BW, body condition score, milk yield and composition and feed intake. This evaluation showed that the model adequately simulates these production variables throughout the lifespan, and across a range of dairy cattle genotypes.     

Heterogeneity in bacterial surface polysaccharides,probed on a single-molecule basis

The heterogeneity in bacterial surface macromolecules was probed by examining individual macromolecules on the surface of Pseudomonas putida KT2442 via single-molecule force spectroscopy (SMFS). Using an atomic force microscope (AFM), the silicon nitride tip was brought into contact with biopolymer molecules on bacterial cells and these macromolecules were stretched. Force-extension measurements on different bacterial cells showed a range of adhesion affinities and polymer lengths. However, substantial heterogeneity was also observed in the force-extension curves on a single bacterium. A given bacterium has biopolymers that range in size from tens to hundreds of nanometers, with adhesion affinities for the AFM tip from nearly zero to greater than 1 nN. A distribution of polymer sizes was confirmed by size-exclusion chromatography. The freely jointed chain (FJC) model for polymer elasticity was applied to individual force-extension curves in order to estimate the contour lengths and segment lengths of the polymer chains. A range of segment lengths was obtained using the FJC model, from 0.154-0.45 nm in water, 0.154-0.32 nm in 0.01 M KCl, and 0.154-0.65 nm in 0.1 M KCl. The modeling confirms that the heterogeneity in biopolymers is more than a matter of differences in molecular weights, since a range of stiffnesses (segment lengths) was also observed. The effect of salt concentration on biopolymer conformation and adhesion was also explored. While the biopolymers were flexible in all solvents, they were slightly more extended in water than in either of the salt solutions (0.01 and 0.1 M KCl). The adhesion of polysaccharides with the AFM tip was not dependent on salt concentration, because the polymers were not highly charged and heterogeneity overwhelmed any trends that could be observed in adhesion with respect to solution ionic strength. These experiments indicate that heterogeneity in biopolymer properties on an individual bacterium and within a population of bacterial cells may be much greater than previously believed and should be incorporated into models of bacterial adhesion.     

Challenges of the utilization of wood polymers: how can they be overcome?

Diminishing fossil fuel resources as well as growing environmental and energy security concerns, in parallel with growing demands on raw materials and energy, have intensified global efforts to utilize wood biopolymers as a renewable resource to produce biofuels and biomaterials. Wood is one of the most abundant biopolymer composites on earth that can be converted into biofuels as well as used as a platform to produce bio-based materials. The major biopolymers in wood are cellulose, hemicelluloses, and lignin which account for >90% of dry weight. These polymers are generally associated with each other in wood cell walls resulting in an intricate and dynamic cell wall structure. This mini-review provides an overview of major wood biopolymers, their structure, and recent developments in their utilization to develop biofuels. Advances in genetic modifications to overcome the recalcitrance of woody biomass for biofuels are discussed and point to a promising future.     

Anaerobic digestion of starch-polyvinyl alcohol biopolymer packaging: biodegradability and environmental impact assessment

The digestibility of a starch-polyvinyl alcohol (PVOH) biopolymer insulated cardboard coolbox was investigated under a defined anaerobic digestion (AD) system with key parameters characterized. Laboratory results were combined with industrial operational data to develop a site-specific life cycle assessment (LCA) model. Inoculated with active bacterial trophic groups, the anaerobic biodegradability of three starch-PVOH biopolymers achieved 58-62%. The LCA modeling showed that the environmental burdens of the starch-PVOH biopolymer packaging under AD conditions on acidification, eutrophication, global warming and photochemical oxidation potential were dominated by atmospheric emissions released from substrate degradation and fuel combustion, whereas energy consumption and infrastructure requirements were the causes of abiotic depletion, ozone depletion and toxic impacts. Nevertheless, for this bio-packaging, AD of the starch-PVOH biopolymer combined with recycling of the cardboard emerged as the environmentally superior option and optimization of the energy utilization system could bring further environmental benefits to the AD process.