Microbial Waste Biomass for Removal of Chromium(VI) from Chrome Effluent

ABSTRACT

Microbial waste biomass, a by-product of the fermentation industry, was developed as a biosorbent to remove hexavalent chromium (Cr) from the acidic effluent of a metal processing industry. In batch sorption, 100% Cr(VI) removal was achieved from aqueous solution in 30 min contact at pH 4.0–5.0. The Cr(VI) sorption equilibrium was evaluated using the Langmuir and Freundlich models, indicating the involvement of ion exchange and physicochemical interaction. Fourier transform infrared (FTIR) analysis revealed the presence of amine, hydroxyl, and imine functional groups present on the surface of microbial biomass that are involved in Cr binding. In a continuous sorption system, 95 mg L^?1 of Cr(VI) was adsorbed before the column reached a breakthrough point of 0.1 mg L^?1 Cr(VI) at the column outlet. An overall biosorption capacity of 12.6 mg Cr(VI) g^?1 of dry microbial waste was achieved, including the partially saturated portion of the dynamic sorption zone. Insignificant change in metal removal was observed up to 10 cycles. In pilot-scale studies, 100% removal of Cr(VI) was observed up to 5 weeks, and the method was found to be cost-effective, commercially viable, and environmentally friendly, as it does not generate toxic chrome sludge.     

Evaluation of Cr(VI) Exposed and Unexposed Plant Parts of Tradescantia pallida (Rose) D. R. Hunt. for Cr Removal from Wastewater by Biosorption

Phytoremediation is an efficient method for the removal of heavy metals from contaminated systems. A productive disposal of metal accumulating plants is a major concern in current scenario. In this work, Cr(VI) accumulating Tradescantia pallida plant parts were investigated for its reuse as a biosorbent for the removal of Cr(VI) ions. The effect of pH, contact time, sorbent dosage, Cr(VI) concentration and temperature was examined to optimize these process parameters. Results showed that Cr(VI) exposed/unexposed T. pallida leaf biomass could remove 94% of chromium with a sorption capacity of 64.672 mg g^?1. Whereas the kinetics of Cr(VI) biosorption was well explained by the pseudo second-order kinetic model, the Langmuir model better described the data on Cr(VI) sorption isotherm compared with the Freundlich model. The changes in the free energy (ΔG°), entropy (ΔS°) and enthalpy (ΔH°) were found to be ?5.276 kJ mol^?1, 0.391 kJ mol^?1 K^?1 and 11.346 kJ mol^?1, respectively, which indicated the process to be spontaneous, feasible and endothermic in nature. FTIR spectra of T. pallida leaf biomass revealed the active participation of ligands, such as ?NH, amide, hydroxyl and sulphonate groups present in the biomass for Cr(VI) binding, SEM analysis revealed a porous structure of the biosorbent for an easy uptake of Cr(VI).     

Removal of Chromium (VI) from Aqueous Solution Using Mycelial Pellets of Penicillium simplicissimum Impregnated with Powdered Biochar

The mycelia pellets of Penicillium simplicissimum impregnated with powdered biochar (MPPSIPB) were synthesized and applied to remove chromium (VI) from aqueous solution. The effects of pH, MPPSIPB dosage, initial Cr(VI) concentration, and contact time were investigated via batch experiments. Results indicated that the percentage removal of Cr(VI) was significantly dependent on the pH of the solution. Ten grams mycelial pellets and 0.2 g powdered biochar could form the most stable pellets. The maximum value of biosorption of Cr(VI) was 28.0 mg/g. Scanning electron microscopy (SEM) analysis showed that the mycelia pellets of Penicillium simplicissimum had abundant filamentous network, which entrapped powdered biochar firmly. Fourier transform infrared (FTIR) analysis suggested that O?H, N?H, C?H, C?O, and C?OH groups from MPPSIPB were involved in chromium binding and the subsequent reduction. Kinetic studies indicated that the pseudo-second-order equation fit best for Cr(VI) removal from aqueous solution. Freundlich isotherm was found to apply better for the adsorption equilibrium data with respect to the Langmuir isotherm. Furthermore, MPPSIPB can be separated from aqueous solution completely by filtration. Both experimental study and modeling results indicated that MPPSIPB exhibited remarkable affinity for chromate and had a potential application in Cr(VI) removal from water.     

Biosorption Potency of Aspergillus niger for Removal of Chromium (VI)

Aspergillus niger isolated from soil and effluent of leather tanning mills had higher activity to remove chromium. The potency of Aspergillus niger was evaluated in shake flask culture by absorption of chromium at pH 6 and temperature 30°C. The results of the study indicated removal of more than 75% chromium by Aspergillus niger determined by diphenylcarbazide colorimetric assay and atomic absorption spectrophotometry after 7 days. Study of microbial Cr(VI) reduction and identification of reduction intermediates has been hindered by the lack of analytical techniques that can identify the oxidation state with subcellular spatial resolution. Therefore, removal of chromium was further substantiated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), which indicated an accumulation of chromium in the fungal mycelium.     

Biogeochemical Elimination of Chromium (VI) from Contaminated Water

Ferrous iron [Fe(II)] reductively transforms heavy metals in contaminated groundwater, and the bacterial reduction of indigenous ferric iron [Fe(III)] to Fe(II) has been proposed as a means of establishing redox reactive barriers in the subsurface. The reduction of Fe(III) to Fe(II) can be accomplished by stimulation of indigenous dissimilatory metal-reducing bacteria (DMRB) or injection of DMRB into the subsurface. The microbially produced Fe(II) can chemically react with contaminants such as Cr(VI) to form insoluble Cr(III) precipitates. The DMRB Shewanella algae BrY reduced surface-associated Fe(III) to Fe(II), which in batch and column experiments chemically reduced highly soluble Cr(VI) to insoluble Cr(III). Once the chemical Cr(VI) reduction capacity of the Fe(II)/Fe(III) couple in the experimental systems was exhausted, the addition of S. algae BrY allowed for the repeated reduction of Fe(III) to Fe(II), which again reduced Cr(VI) to Cr(III). The research presented herein indicates that a biological process using DMRB allows the establishment of a biogeochemical cycle that facilitates chromium precipitation. Such a system could provide a means for establishing and maintaining remedial redox reactive zones in Fe(III)-bearing subsurface environments.     

Biogeochemical Elimination of Chromium (VI) from Contaminated Water

Ferrous iron [Fe(II)] reductively transforms heavy metals in contaminated groundwater, and the bacterial reduction of indigenous ferric iron [Fe(III)] to Fe(II) has been proposed as a means of establishing redox reactive barriers in the subsurface. The reduction of Fe(III) to Fe(II) can be accomplished by stimulation of indigenous dissimilatory metal-reducing bacteria (DMRB) or injection of DMRB into the subsurface. The microbially produced Fe(II) can chemically react with contaminants such as Cr(VI) to form insoluble Cr(III) precipitates. The DMRB Shewanella algae BrY reduced surface-associated Fe(III) to Fe(II), which in batch and column experiments chemically reduced highly soluble Cr(VI) to insoluble Cr(III). Once the chemical Cr(VI) reduction capacity of the Fe(II)/Fe(III) couple in the experimental systems was exhausted, the addition of S. algae BrY allowed for the repeated reduction of Fe(III) to Fe(II), which again reduced Cr(VI) to Cr(III). The research presented herein indicates that a biological process using DMRB allows the establishment of a biogeochemical cycle that facilitates chromium precipitation. Such a system could provide a means for establishing and maintaining remedial redox reactive zones in Fe(III)-bearing subsurface environments.     

Involvement of Asada-Halliwell Pathway During Phytoremediation of Chromium (VI) in Brassica juncea L. Plants

Brassica juncea (Indian mustard) L. plants were exposed to different concentrations (0.0, 0.1, 0.3 and 0.5 mM) of Chromium (Cr) and harvested after 30 and 60 days of sowing for the analysis of growth parameters, metal uptake and oxidative stress markers. Significant accumulation of Cr (VI) by B. juncea L. plants resulted in the reduced growth and modulations in the pool of various biochemical stress markers. The toxic effects of Cr (VI) on growth and other stress markers (protein content, lipid peroxidation and antioxidative enzymes viz.SOD, CAT, POD, APOX, GR, DHAR and MDHAR) in B. juncea L. were observed to be concentration and time dependent. Effect of Cr (VI) on biochemical parameters was differential and their maximum activities of SOD, POD, APX, GR, DHAR and lipid peroxidation were recorded at 0.5 mM concentration in 30 days old plants. Whereas, trend in the activities of most of the stress markers was reversed in 60 days old plants. The results obtained from the study suggested that Cr (VI) stress inhibited growth of B. juncea L. plants is directly interrelated with its accumulation and resulted in the modulation in activities of various stress markers.     

Removal of Cr(VI) from ground water by Saccharomyces cerevisiae

Chromium can be removed from ground water by the unicellular yeast, Saccharomyces cerevisiae. Local ground water maintains chromium as CrO₄ ^2- because of bicarbonate buffering and pH and E _h conditions (8.2 and +343 mV, respectively). In laboratory studies, we used commercially available, nonpathogenic S. cerevisiae to remove hexavalent chromium [Cr(VI)] from ground water. The influence of parameters such as temperature, pH, and glucose concentration on Cr(VI) removal by yeast were also examined. S. cerevisiae removed Cr(VI) under aerobic and anaerobic conditions, with a slightly greater rate occurring under anaerobic conditions. Our kinetic studies reveal a reaction rate (V_max) of 0.227 mg h^-1 (g dry wt biomass)^-1 and a Michaelis constant (Km) of 145 mg/l in natural ground water using mature S. cerevisiae cultures. We found a rapid (within 2 minutes) initial removal of Cr(VI) with freshly hydrated cells [55–67 mg h^-1 (g dry wt biomass)^-1] followed by a much slower uptake [0.6–1.1 mg h^-1 (g dry wt biomass)^-1] that diminished with time. A materials-balance for a batch reactor over 24 hours resulted in an overall shift in redox potential from +321 to +90 mV, an increase in the bicarbonate concentration (150–3400 mg/l) and a decrease in the Cr(VI) concentration in the effluent (1.9-0 mg/l).     

Removal of Chromium(VI) Ions from Synthetic Solutions by the Fungus Penicillium purpurogenum

The ability of Penicillium purpurogenum to bind high amounts of chromium(VI) from aqueous solutions is demonstrated. Cr(VI) adsorption capacity increases with time during the first four hours and then leveled off toward the equilibrium adsorption capacity. Biosorption of Cr(VI) ions reached equilibrium in four hours. Binding of Cr(VI) ions with Penicillium purpurogenum biomass was clearly pH dependent. Cr(VI) loading capacity increased with increasing pH. The adsorption of Cr(VI) ions reached a plateau value at a pH of approx. 6.0. The maximum capacity of adsorption of Cr(VI) ions onto the fungal biomass was 36.5 mg/g. Adsorption behavior of Cr(VI) ions can be approximately described with the Langmuir equation. When applying the Langmuir model, the maximum adsorption capacity (Q_max) and the Langmuir constant were found to be 40 mg/g and 3.9 × 10^–3 mg/L. Elution of Cr(VI) ions was performed by means of 0.5 M HCl. It was possible to use the biomass of Penicillium purpurogenum for six cycles for biosorption.     

Optimization of Chromium(VI) Detoxification by Pseudomonas aeruginosa and Its Application for Treatment of Industrial Waste and Contaminated Soil

The reduction of Cr(VI) to Cr(III) is a potential detoxification process. In this study, seven Pseudomonas spp. were isolated and screened for chromium reduction. Isolate P4 was able to grow in the presence of 8000 μM chromium, in spite of the fact that the isolate was not previously exposed to any metal stress. Isolate P4 was identified as Pseudomonas aeruginosa strain SRD chr3 by 16S rDNA sequence analysis. Shake flask study showed 78% reduction of 1000 μM Cr(VI) after 6 h of incubation. The optimum pH for chromium reduction by the isolate was between 6 and 8. Isolate Pseudomonas aeruginosa gave 50–80% Cr(VI) reduction even in the presence of 100 mM of Cu, Mn, Ni, and Zn and 300–800 mM NaCl in 24 h, compared with the absence of any of these metals. In a 5-L reactor, the isolate showed 84.85% reduction of Cr(VI) even at the 70th cycle, with a hydraulic retention time of 24 h from the effluent of a hard chrome plating (electroplating) industry, which contained 2100 mg L^?1 hexavalent chromium. The chromate-amended soil inoculated with the isolate showed 2800 μM chromium removal from 4000 μM Cr(VI) kg^?1 of soil, which corresponds to 70% removal. The isolate had the ability to degrade stimulated waste containing 10,000 μM chromium.     

Chitin deacetylase: A potential target for Mythimna separata (Walker) control

Chitin deacetylase (CDA) is a hydrolytic enzyme that modifies chitin into chitosan in the body of insects. In this study, we obtained a full-length complementary DNA sequence (MsCDA1) from the oriental armyworm Mythimna separata by high-throughput sequencing. MsCDA1 is 1,952 bp long and includes 1,620 bp open reading frame encoding 539 amino acids. Analysis by quantitative real time polymerase chain reaction showed that MsCDA1 expression was higher at the adult stage than at earlier developmental stages. MsCDA1 was expressed in all larval tissues examined, in which the highest expression level was found in the midgut. The RNA interference (RNAi) suppressed MsCDA1 expression levels at 12, 24, and 48 hr after injection of double-stranded RNA (1–4 μg per larva) specific to MsCDA1. Under RNAi condition, CDA enzyme activity was significantly reduced and changes an ultramicroscopic structure of M. separata peritrophic matrix especially in its microfibrillar organization exhibiting loose network. In contrast, the surface of the peritrophic matrix was relatively smooth and well organized at control or low RNAi conditions. Moreover, RNAi of MsCDA1 expression impaired larval growth and development, occasionally leading to larval death. These results demonstrate that MsCDA1 plays a crucial role in maintaining peritrophic matrix integrity in M. separata.     

Biosorption of chromium(VI) in aqueous solutions by chemically modified Strychnine tree fruit shell

Chromium(VI) was removed from aqueous solution using sulfuric- and phosphoric-acid-activated Strychnine tree fruit shells (SSTFS and PSTFS) as biosorbents. Effects of various parameters such as adsorbent dose (0.02–0.1 g/L), temperature (303–333 K), agitation speed, solution pH (2–9), contact time, and initial Cr(VI) concentration (50–250 mg/L) were studied for a batch adsorption system. The optimum pH range for Cr(VI) adsorption was determined as 2. Equilibrium adsorption data were analyzed with isotherm models and the Langmuir and Freundlich models got best fitted values for SSTFS (R² value – 0.994) and PSTFS (R² value – 0.996), respectively. The maximum adsorption capacities of SSTFS and PSTFS were 100 and 142.85 mg/g, respectively. The biosorption process was well explained by pseudo-second-order kinetic model with higher R² value (SSTFS – 0.996, PSTFS – 0.990) for both biosorbents. Characterization of biosorbents was done using Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, energy-dispersive X-ray analysis, and thermogravimetric analysis. Thermodynamic studies revealed the spontaneous, endothermic, and randomness in nature of the Cr(VI) adsorption process. Different concentrations of NaOH solutions were used to perform the desorption studies. The results demonstrated that both SSTFS and PSTFS can be used as an effective and low-cost biosorbent for removal of Cr(VI) from aqueous solutions.     

Biosorption of Chromium(VI) and Lead(II): Role of Spirulina platensis in the Treatment of Industrial Effluent

Biosorption is the process of removal of any chemical molecules by the treatment of biological material. Industrialization resulted in the discharge of various toxic heavy metals into water bodies, which poses serious health hazards to humans and animals. In the present study, live Spirulina platensis was used as a biosorbent for the removal of the heavy metals chromium (Cr(VI)) and lead (Pb(II)) from the aqueous samples. S. platensis were cultured in the presence of different concentrations of heavy metals. The growth of the algal cells was found to be decreased by 59% and 36% in media containing 50 ppm Cr(VI) and Pb(II), respectively. To assess the biosorption of heavy metals, at different time intervals, the spent culture media were used to detect Cr(VI) by atomic absorption spectroscopy method and Pb(II) by 4-(2-pyridylazo)resorcinol indicator method. Results suggested that there was a significant uptake of Cr(VI) and Pb(II) from the medium by S. platensis, with corresponding decrease of metals in the medium. When metal salt solutions or industrial effluent samples were passed through the column containing immobilized live S. platensis in calcium alginate beads, the concentration of Cr(VI) was found to be reduced drastically. The present study indicates the application of S. platensis for the bioremediation of heavy metals from the samples obtained from industrial effluents.     

Using the Selective Ion Exchange Resin Extraction and XANES Methods to Evaluate the Effect of Compost Amendments on Soil Chromium(VI) Phytotoxicity

The Cu-saturated selective ion exchange resin (DOWEX M4195) extraction method was used to investigate the effects of two amendments, 5 and 15% organic matter in the form of hog-dung compost (HC) or cattle-dung compost (CC), on Cr(VI) bioavailability in three soils spiked with various levels of Cr(VI). The results showed that addition of composts could decrease the amounts of resin-extractable Cr(VI) in Cr(VI)-spiked soils, and the CC amendment decreased resin-extractable Cr(VI) more than the HC amendment. The X-ray Absorption Near-edge Structure spectroscopy (XANES) method was used to examine the distribution of Cr(III) and Cr(VI) species in Cr(VI)-spiked soils that were affected by compost amendments, and to elucidate the mechanisms for the decrease of resin-extractable Cr(VI) due to the application of composts. The XANES results suggested that the decrease in the amounts of resin-extractable Cr(VI) after compost addition was mainly due to the reduction of Cr(VI) to Cr(III). The amounts of soil resin-extractable Cr(VI) were also correlated with wheat seedling growth in order to evaluate the effect of compost amendments on decreasing the phytotoxicity of soil Cr(VI). The results showed that there was a sigmoidal relationship between soil resin-extractable Cr(VI) and the plant height of wheat seedlings and the obtained effective concentrations of resin-extractable Cr(VI) resulting in 10 and 50% growth inhibition (EC₁₀ and EC₅₀) were 76 and 191 mg kg⁻¹ respectively. The above results suggested that the resin extraction method was a useful tool for assessing Cr(VI) phytotoxicity and that addition of composts would enhance Cr(VI) reduction to Cr(III) in soils and thus relieve Cr(VI) phytotoxicity.     

An Evaluation of a Technical Holding Time for the Preparation and Analysis of Hexavalent Chromium in Soils/Sediments

Chromium (Cr) is routinely measured during environmental investigations involving soils and other solid matrix sampling. Regulatory-approved analytical methods are available to extract and quantify total Cr in various environmental media. However, due to significant toxicity differences between trivalent [Cr(III)] and hexavalent [Cr(VI)] valences, it is compelling that the two can be quantitatively distinguished. SW-846 Method 3060A is an effective extraction technique for soluble and insoluble Cr(VI). Several regulatory-approved methods exist for quantitating the Cr(VI) in extracts or aqueous samples. Although a 6-month holding time for total Cr is not encumbering, investigators are challenged by the typical 24-h holding time (sample collection through analysis) for Cr(VI) in aqueous samples and the 24- to 96-h holding time range for solid matrix samples typically set by regulators. This research report addresses quantitating Cr(VI) in solid matrices. Using SW-846 Methods 3060A/7196A, a scientifically defensible basis has been established for designating a 30-day holding time for Cr(VI) extraction from solid matrices and a 7-day holding time for Cr(VI) analysis once solubilized in the alkaline digestate. The study results indicate that a 30-day holding time, from sample collection to preparation, and a 7-day holding time, from digestion to analysis, are appropriate for Cr(VI) analysis.     

Removal of Hexavalent Chromium by Aspergillus niger Through Reduction and Accumulation

Abstract

Industrial activities discharge a large amount of wastes containing hexavalent chromium [Cr(VI)] into the environment, which poses a threat to human health. Microorganisms can be used as efficient tools for Cr(VI) remediation. In this study, the Cr(VI) removal capacity of Aspergillus niger was evaluated. A. niger could tolerate and reduce Cr(VI) by nearly 100% at concentrations ranging from 10 to 50?mg/L. Overall, almost 97% of the Cr(VI) removal was caused by extracellular reduction whereas 3% was caused by accumulation. Extracellular reduction was mediated by non-enzymatic cell secretions, whereas extracellular accumulated Cr formed precipitates on the hyphal surfaces and was partially absorbed on the cell wall. Cr(VI) also entered the cell and was reduced by the strong chromate reductase activity in cell-free extracts and then accumulated within the cell. These data suggest that A. niger, which has the capacity to remove Cr(VI) by reduction and accumulation, can be a useful tool for Cr(VI) remediation.     

Chromium(III) Oxidation Coupled with Microbially Mediated Mn(II) Oxidation

Abstract

Reductive immobilization of Cr(VI) has been widely explored as a cost-effective approach for Cr-contaminated site remediation. In soils containing manganese oxides, however, the immobilized form of chromium, i.e., Cr(III), could potentially be reoxidized. In this study, batch experiments were conducted to assess whether there were any microbial processes that could accelerate Cr(III) oxidation in aerobic, manganese-containing systems. The results showed that in the presence of at least one species of manganese oxidizers, Pseudomonas putida, Cr(III) oxidation took place at low concentrations of Cr(III). About 30–50% of added Cr(III) (10–200 μ M) was oxidized to Cr(VI) within five days in the systems with P. putida and biogenic Mn oxides. The rate of Cr(III) oxidation was approximately proportional to the initial concentration of Cr(III) up to 100 μ M, but the growth of P. putida was partially inhibited by Cr(III) at 200 μ M and totally stopped when it reached 500 μ M. Cr(III) oxidation was dependent upon the biogenic formation of Mn oxides, though the oxidation rate was not directly proportional to the amount of Mn oxides formed. Chromium(III) oxidation took place through a catalytic pathway, in which the microbes mediated Mn(II) oxidation to form Mn-oxides, and Cr(III) was subsequently oxidized by the biogenic Mn-oxides.     

Biosorption of uranium(VI) by Aspergillus fumigatus

Aspergillus fumigatus removed uranium(VI) very rapidly and reached equilibrium within 1 h of contact of biomass with the aqueous metal solution. Biosorption data fitted to Langmuir model of isotherm and a maximum loading capacity of 423 mg U g^–1 dry wt was obtained. Distribution coefficient as high as 10,000 (mg U g^–1)/(mg U ml^–1) at a residual metal ion concentration of 19 mg l^–1 indicates its usefulness in removal of uranium(VI) from dilute waste streams. Optimum biosorption was seen at pH 5.0 and was independent of temperature (5–50°C ). Initial metal ion concentration significantly influenced uptake capacity which brought down % (w/w) uranium(VI) removal from 90 at 200 mg U l^–1 to 35 at 1000 mg U l^–1. Presence of 0.84 mmol Fe²⁺, Fe³⁺, Ca²⁺ and Zn²⁺ had no effect on uranium(VI) biosorption unlike Al³⁺ (0.84 mM) which was inhibitory.     

Preparation and Characterization of Chemically Modified Silk Cotton Hull Activated Carbon and Its Effects on Cd(II) Removal from Aqueous Solutions

The novel biosorbent silk cotton hull, an agrowaste material, has been successfully utilized for the removal of cadmium(II) from aqueous solutions. The adsorption of cadmium onto three kinds of activated biosorbent has been studied: modified by concentrated sulfuric acid alone (AC), a mixture of concentrated sulfuric acid and hydrogen peroxide (AC1), and a mixture of concentrated sulfuric acid and ammonium persulfate (AC2). The adsorption studies were carried out to optimize the process parameters such as pH, adsorbent dosage, contact time, and initial metal ion concentration. Maximum metal removal was observed at pH 7.0 with a contact time of 90 min at stirring speed of 200 rpm with an adsorbent dosage of 4.0 g L^?1. The sorption isotherms were studied using the Langmuir, Freundlich, and Tempkin isotherm models. The maximum adsorption capacities were 100.00, 142.86, and 142.87 mg g^?1 for AC, AC1, and AC2, respectively. Accordingly, the surface modification of the activated carbons AC1 and AC2 enhanced cadmium removal greatly. The experiments demonstrated that the removal of metal ions followed the pseudo-second-order kinetic model. The sorption mechanism is discussed in terms of the activated surface properties. A relationship between the oxygen content and sorption was found in this novel material. Desorption experiments were carried out using hydrochloric acid with a view to generate the spent adsorbent and to recover the adsorbed metal ions.     

Microbial reduction of Cr(VI) in the presence of chromate conversion coating constituents

The reduction of Cr(VI) by the metal-reducing bacterium Shewanella oneidensis MR-1 was evaluated, to determine the potential for exploiting Cr(VI) bioreduction as a means of treating chromate conversion coating (CCC) waste streams. Inclusion of Cr(VI) at concentrations ≥1 mM inhibited aerobic growth of S. oneidensis, but that organism was able to reduce Cr(VI) at a concentration of up to 1 mM under anaerobic, nongrowth conditions. S. oneidensis reduced Cr(VI) in the presence of common CCC constituents, with the exception of ferricyanide, when these CCC constituents were included at concentrations typical of CCC waste streams. Ferricyanide inhibited neither aerobic growth nor metabolism under aerobic, nitrate- or iron-reducing conditions, suggesting that the ferricyanide-depended inhibition of Cr(VI) reduction is not due to broad metabolic inhibition, but is specific to Cr(VI) reduction. Results indicate that under some conditions, the activities of metal-reducing bacteria, such as S. oneidensis, could be exploited for the removal of Cr(VI) from CCC waste streams under appropriate conditions.