Application of <Emphasis Type="Italic">In Situ</Emphasis> Polymerization for Design and Development of Oral Drug Delivery Systems

Although preformed polymers are commercially available for use in the design and development of drug delivery systems, in situ polymerization has also been employed. In situ polymerization affords the platform to tailor and optimize the drug delivery properties of polymers. This review brings to light the benefits of in situ polymerization for oral drug delivery and the possibilities it provides to overcome the challenges of oral route of administration.     

Improved Skin Penetration Using <Emphasis Type="Italic">In Situ</Emphasis> Nanoparticulate Diclofenac Diethylamine in Hydrogel Systems: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Studies

Delivering diclofenac diethylamine transdermally by means of a hydrogel is an approach to reduce or avoid systemic toxicity of the drug while providing local action for a prolonged period. In the present investigation, a process was developed to produce nanosize particles (about 10 nm) of diclofenac diethylamine in situ during the development of hydrogel, using simple mixing technique. Hydrogel was developed with polyvinyl alcohol (PVA) (5.8% w/w) and carbopol 71G (1.5% w/w). The formulations were evaluated on the basis of field emission scanning electron microscopy, texture analysis, and the assessment of various physiochemical properties. Viscosity (163–165 cps for hydrogel containing microsize drug particles and 171–173 cps for hydrogel containing nanosize drug particles, respectively) and swelling index (varied between 0.62 and 0.68) data favor the hydrogels for satisfactory topical applications. The measured hardness of the different hydrogels was uniform indicating a uniform spreadability. Data of in vitro skin (cadaver) permeation for 10 h showed that the enhancement ratios of the flux of the formulation containing nanosize drug (without the permeation enhancer) were 9.72 and 1.30 compared to the formulation containing microsized drug and the marketed formulations, respectively. In vivo plasma level of the drug increased predominantly for the hydrogel containing nanosize drug-clusters. The study depicts a simple technique for preparing hydrogel containing nanosize diclofenac diethylamine particles in situ, which can be commercially viable. The study also shows the advantage of the experimental transdermal hydrogel with nanosize drug particles over the hydrogel with microsize drug particles.     

Non-ionic Surfactant Based <Emphasis Type="Italic">In Situ</Emphasis> Forming Vesicles as Controlled Parenteral Delivery Systems

Non-ionic surfactant (NIS) based in situ forming vesicles (ISVs) present an affordable alternative to the traditional systems for the parenteral control of drug release. In this work, NIS based ISVs encapsulating tenoxicam were prepared using the emulsion method. Tenoxicam-loaded ISVs were prepared using a 2².3¹ full factorial experimental design, where three factors were evaluated as independent variables; type of NIS (A), molar ratio of NIS to Tween®80 (B), and phase ratio of the internal ethyl acetate to the external Captex® oil phase (C). Percentage drug released after 1 h, particle size of the obtained vesicles and mean dissolution time were chosen as the dependent variables. Selected formulation was subjected to morphological investigation, injectability, viscosity measurements, and solid state characterization. Optimum formulation showed spherical nano-vesicles in the size of 379.08 nm with an initial drug release of 37.32% in the first hour followed by a sustained drug release pattern for 6 days. DSC analysis of the optimized formulation confirmed the presence of the drug in an amorphous form with the nano-vesicles. Biological evaluation of the selected formulation was performed on New Zealand rabbits by IM injection. The prepared ISVs exhibited a 45- and 28-fold larger AUC and MRT values, respectively, compared to those of the drug suspension. The obtained findings boost the use of ISVs for the treatment of many chronic inflammatory conditions.     

<Emphasis Type="Italic">In Situ</Emphasis> Gelling Gelrite/Alginate Formulations as Vehicles for Ophthalmic Drug Delivery

The objective of this study was to develop an ion-activated in situ gelling vehicle for ophthalmic delivery of matrine. The rheological properties of polymer solutions, including Gelrite, alginate, and Gelrite/alginate solution, were evaluated. In addition, the effect of formulation characteristics on in vitro release and in vivo precorneal drug kinetic of matrine was investigated. It was found that the optimum concentration of Gelrite solution for the in situ gel-forming delivery systems was 0.3% (w/w) and that for alginate solution was 1.4% (w/w). The mixture of 0.2% Gelrite and 0.6% alginate solutions showed a significant enhancement in gel strength at physiological condition. On the basis of the in vitro results, the Gelrite formulations of matrine-containing alginate released the drug most slowly. For each tested polymer solution, the concentration of matrine in the precorneal area was higher than that of matrine-containing simulated tear fluid (STF) almost at each time point (p < 0.05). The area under the curve of formulation 16 (0.2%Gelrite/0.6%alginate) was 4.65 times greater than that of containing matrine STF. Both the in vitro release and in vivo pharmacological studies indicated that the Gelrite/alginate solution had the better ability to retain drug than the Gelrite or alginate solutions alone. The tested formulation was found to be almost non-irritant in the ocular irritancy test. The overall results of this study revealed that the Gelrite/alginate mixture can be used as an in situ gelling vehicle to enhance ocular retention.     

Bio-shielding <Emphasis Type="Italic">In Situ</Emphasis> Forming Gels (BSIFG) Loaded With Lipospheres for Depot Injection of Quetiapine Fumarate: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

Quetiapine fumarate (QF), an anti-schizophrenic drug, suffers from rapid elimination and poor bioavailability due to extensive first-pass effect. Intramuscularly (IM) injected lipospheres were designed to enhance the drug’s bioavailability and extend its release. A central composite design was applied to optimize the liposphere preparation by a melt dispersion technique using Compritol® 888 ATO or glyceryl tristearate as lipid component and polyvinyl alcohol as surfactant. Lipospheres were evaluated for their particle size, entrapment efficiency, and in vitro release. The optimized QF lipospheres were prepared using a Compritol® 888 ATO fraction of 18.88% in the drug/lipid mixture under a stirring rate of 3979 rpm. The optimized lipospheres were loaded into a thermoresponsive in situ forming gel (TRIFG) and a liquid crystalline in situ forming gel (LCIFG) to prevent in vivo degradation by lipases. The loaded gels were re-evaluated for their in vitro release and injectability. Bioavailability of QF from liposphere suspension and bio-shielding in situ gels loaded with QF lipospheres were assessed in rabbits compared to drug suspension. Results revealed that the AUC_0–72 obtained from the liposphere-loaded TRIFG was ～3-fold higher than that obtained from the aqueous drug suspension indicating the bio-shielding effect of Poloxamer® 407 gel to inhibit the biodegradation of the lipospheres prolonging the residence of the drug in the muscle for higher absorption. Our results propose that bio-shielding in situ Poloxamer® 407 gels loaded with lipospheres is promising for the development of IM depot injection of drugs having extensive first-pass metabolism and rapid elimination.     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

In planta transformation of <Emphasis Type="Italic">Notocactus scopa</Emphasis> cv. <Emphasis Type="Italic">Soonjung</Emphasis> by <Emphasis Type="Italic">Agrobacterium </Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>

Notocactus scopa cv. Soonjung was subjected to in planta Agrobacterium tumefaciens-mediated transformation with vacuum infiltration, pin-pricking, and a combination of the two methods. The pin-pricking combined with vacuum infiltration (20-30 cmHg for 15 min) resulted in a transformation efficiency of 67-100%, and the expression of the uidA and nptII genes was detected in transformed cactus. The established in planta transformation technique generated a transgenic cactus with higher transformation efficiency, shortened selection process, and stable gene expression via asexual reproduction. All of the results showed that the in planta transformation method utilized in the current study provided an efficient and time-saving procedure for the delivery of genes into the cactus genome, and that this technique can be applied to other asexually reproducing succulent plant species.     

Naproxen Microparticulate Systems Prepared Using <Emphasis Type="Italic">In Situ</Emphasis> Crystallisation and Freeze-Drying Techniques

Poor drug solubility and dissolution rate remain to be one of the major problems facing pharmaceutical scientists, with approximately 40% of drugs in the industry categorised as practically insoluble or poorly water soluble. This in turn can lead to serious delivery challenges and poor bioavailability. The aim of this research was to investigate the effects of the surfactants, poloxamer 407 (P407) and caprol® PGE 860 (CAP), at various concentrations (0.1, 0.5, 1 and 3% w/v) on the enhancement of the dissolution properties of poorly water-soluble drug, naproxen, using in situ micronisation by solvent change method and freeze-drying. The extent at which freeze-drying influences the dissolution rate of naproxen microcrystals is investigated in this study by comparison with desiccant-drying. All formulations were evaluated and characterised using particle size analysis and morphology, in vitro dissolution studies, differential scanning calorimetry (DSC), and Fourier transform infra-red (FT-IR) spectroscopy. An increase in poloxamer 407 concentration in freeze-dried formulations led to enhancement of drug dissolution compared to desiccator-dried formulations, naproxen/caprol® PGE 860 formulations and untreated drug. DSC and FT-IR results show no significant chemical interactions between drug and poloxamer 407, with only very small changes to drug crystallinity. On the other hand, caprol® PGE 860 showed some interactions with drug components, alterations to the crystal lattice of naproxen, and poor dissolution profiles using both drying methods, making it a poor choice of excipient.     

Preparation and <Emphasis Type="Italic">In Vitro</Emphasis>/<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Puerarin Solid Self-Microemulsifying Drug Delivery System by Spherical Crystallization Technique

The aim of this work was to establish a method for preparing stable and controllable solid self-microemulsifying drug delivery system (S-SMEDDS) by spherical crystallization technique, which was explored for promoting the dissolution, oral bioavailability, and process efficiency. Solubility test, preparation of liquid self-microemulsifying drug delivery system (L-SMEDDS), and the obtained ternary phase diagrams test have been performed to screen and optimize the composition of LSMEDDS. The optimized formulation was used to prepare puerarin solid self-microemulsifying drug delivery system (Pue-SSMEDDS) by spherical crystallization technique. Droplet size and morphological analysis of the optimal Pue-SSMEDDS were determined to evaluate the final formulation. And the Pue-SSMEDDS was also assessed by flowability study, angle of repose, Carr’s index, and flow velocity. Furthermore, the vitro dissolution and pharmacokinetic profile in vivo were analyzed. The study in vitro showed the Pue-SSMEDDS could disperse in the dispersion medium within 60 s and was spherical with the particle size of 19.66 nm and zeta potential of ?28.3 mV. It could keep stable at low temperature and seal condition for 3 months. In vivo pharmacokinetic experiments of rats, the mean plasma concentration of self-microemulsion group was much higher than that of conventional tablets and could play a long-lasting efficacy, while there was no significant difference between the LSMEDDS and S-SMEDDS. The results suggested the potential of S-SMEDDS could improve the oral bioavailability of poorly water-soluble drug, such as puerarin.     

Revision of the <Emphasis Type="Italic">Serrulati</Emphasis> species of <Emphasis Type="Italic">Penstemon</Emphasis> section <Emphasis Type="Italic">Saccanthera</Emphasis> subsection <Emphasis Type="Italic">Serrulati</Emphasis>

A revision of Penstemon sect. Saccanthera subsect. Serrulati includes a new species (P. salmonensis), a new variety (P. triphyllus var. infernalis), and the elevation of a subspecies to species (P. curtiflorus), bringing the total number of species to eight, which are keyed and described, complete with nomenclature and type citations.     

<Emphasis Type="Italic">Galleria</Emphasis><Emphasis Type="Italic">mellonella</Emphasis> are Resistant to <Emphasis Type="Italic">Pneumocystis</Emphasis><Emphasis Type="Italic">murina</Emphasis> Infection

Studying Pneumocystis has proven to be a challenge from the perspective of propagating a significant amount of the pathogen in a facile manner. The study of several fungal pathogens has been aided by the use of invertebrate model hosts. Our efforts to infect the invertebrate larvae Galleria mellonella with Pneumocystis proved futile since P. murina neither caused disease nor was able to proliferate within G. mellonella. It did, however, show that the pathogen could be rapidly cleared from the host.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

<Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Hydroxyzine Hydrochloride Microsponges for Topical Delivery

Hydroxyzine HCl is used in oral formulations for the treatment of urticaria and atopic dermatitis. Dizziness, blurred vision, and anticholinergic responses, represent the most common side effects. It has been shown that controlled release of the drug from a delivery system to the skin could reduce the side effects while reducing percutaneous absorption. Therefore, the aim of the present study was to produce an effective drug-loaded dosage form that is able to control the release of hydroxyzine hydrochloride into the skin. The Microsponge Delivery System is a unique technology for the controlled release of topical agents, and it consists of porous polymeric microspheres, typically 10–50 μm in diameter, loaded with active agents. Eudragit RS-100 microsponges of the drug were prepared by the oil in an oil emulsion solvent diffusion method using acetone as dispersing solvent and liquid paraffin as the continuous medium. Magnesium stearate was added to the dispersed phase to prevent flocculation of Eudragit RS-100 microsponges. Pore inducers such as sucrose and pregelatinized starch were used to enhance the rate of drug release. Microsponges of nearly 98% encapsulation efficiency and 60–70% porosity were produced. The pharmacodynamic effect of the chosen preparation was tested on the shaved back of histamine-sensitized rabbits. Histopathological studies were driven for the detection of the healing of inflamed tissues.     

<Emphasis Type="Italic">In vitro</Emphasis> flowering of <Emphasis Type="Italic">Perilla frutescens</Emphasis>

This study investigated the factors affecting in vitro flowering of Perilla frutescens. The shoots regenerated from cotyledonary and hypocotyl explants cultured on Murashige and Skoog (MS) medium supplemented with benzyladenine (BA) and indole-3-acetic acid, each at 0.5 mg l⁻¹, were excised and transferred to MS medium containing 30 g l⁻¹ of sucrose, 8.25 g l⁻¹ of ammonium nitrate, and 1.0 mg l⁻¹ of BA. After 40 d of culture, 86.2% of shoots flowered and most of which self-fertilized in vitro and produced mature fruits with viable seeds. These seeds were germinated and plants were grown to maturity and flowered in soil under greenhouse conditions. The in vitro flowering system reported in this study may facilitate rapid breeding of P. frutescens and offers a model system for studying the physiological mechanism of flowering.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

<Emphasis Type="Italic">In vitro</Emphasis> Blastogenesis inhibited by <Emphasis Type="Italic">Erwinia carotovora</Emphasis><Emphasis Type="SmallCaps">L</Emphasis>-Asparaginase

Escherichia coliL-asparaginase, an antileukaemic agent in man¹, inhibits in vitro mitogen or antigen-induced blastogenesis in man^2,3 and in animals (M. Bennett, E. G. Mayhew and T. Han, unpublished data) and suppresses bone-marrow derived antibody precursor cells in the mouse⁴. We now report that another L-asparaginase preparation—from Erwinia carotovora—also possesses antileukaemic activity^5,6 and has a more pronounced immunosuppressive effect on in vitro blastogenesis than the E. coli enzyme.     

Ectomycorrhizae of <Emphasis Type="Italic">Tuber huidongense</Emphasis> and <Emphasis Type="Italic">T. liyuanum</Emphasis> with <Emphasis Type="Italic">Castanea mollissima</Emphasis> and <Emphasis Type="Italic">Pinus armandii</Emphasis>

Tuber huidongense and T. liyuanum are common commercial white truffles in China that belong to the Rufum and Puberulum groups of the genus Tuber, respectively. Their mycorrhizae were successfully synthesized with two native trees—Castanea mollissima and Pinus armandii—under greenhouse conditions. The identities of the mycorrhizae were confirmed through internal transcribed spacer (ITS) sequence analyses, and their morphological characteristics were described. All of the obtained mycorrhizae have an interlocking pseudoparenchymatous mantle, which is a typical feature of truffle mycorrhizae. The mycorrhizae of T. huidongense on the two trees have hyaline branched emanating hyphae, similar to the documented mycorrhizae of the Rufum group. The unramified, spiky, and hyaline cystidia on the mycorrhizae of T. liyuanum with both C. mollissima and P. armandii further confirmed that this characteristic is constant for the mycorrhizae of the Puberulum group. The successful mycorrhizal syntheses on the two nut-producing trees will be of economic importance in the cultivation of the two truffles.     

<Emphasis Type="Italic">In vitro</Emphasis> and <Emphasis Type="Italic">In vivo</Emphasis> Studies on a Novel Bioadhesive Colloidal System: Cationic Liposomes of Ibuprofen

The objective of this study was to develop an ocular drug delivery system built on the cationic liposomes, a novel bioadhesive colloidal system, which could enhance the precorneal residence time, ocular permeation, and bioavailability of ibuprofen. The optimal formulation of cationic liposomes prepared by ethanol injection method was ultimately confirmed by an orthogonal L₉ (3³) test design. In addition, γ-scintigraphic technology and the microdialysis technique were utilized in the assessment of in vivo precorneal retention capability and ocular bioavailability individually. In the end, we acquired the optimal formulation of ibuprofen cationic liposomes (Ibu-CL) by orthogonal test design, and the particle size and entrapment efficiency (EE%) were 121.0 ± 3.5 nm and 72.9 ± 3.4%, respectively. In comparison to ibuprofen eye drops (Ibu-ED), Ibu-CL could significantly prolong the T _max to 100 min and the AUC to 1.53-folds, which indicated that the Ibu-CL could improve the precorneal retention time and bioavailability of ibuprofen. Consequently, these outcomes designated that the ibuprofen cationic liposomes we researched probably are a promising application in ocular drug delivery system.     

<Emphasis Type="Italic">In vitro</Emphasis> culture studies on <Emphasis Type="Italic">Stevia rebaudiana</Emphasis>

Summary Shoot apex, nodal, and leaf explants of Stevia rebaudiana Bertoni can regenerate shoots when cultured on Murashige and Skoog (MS) medium supplemented with 6-benzyladenine (BA; 8.87 μM) and indole-3-acetic acid (5.71 μM). Rooting of the in vitro-derived shoots could be achieved following subculture onto auxin-containing medium. A survival rate of 70% was recorded at the hardening phase on the substrate cocopeat. The presence of the sweet diterpene glycosides, viz. stevioside and rebaudioside, was confirmed in the in vitro-derived tissues of Stevia using HPTLC techniques. Callus cultured on agar-solidified MS medium supplemented with BA (8.87 μM) and indole-3-butyric acid (9.80 μM) showed the highest sweetener content.     

<Emphasis Type="Italic">In vitro</Emphasis> propagation of the genus <Emphasis Type="Italic">Clivia</Emphasis>

We have developed a protocol for the in vitro propagation of the genus Clivia. Shoots were regenerated when fragments of the peduncle-pedicel junction (PP junction) from young inflorescences were used as explants. The optimal media for PP junction were Murashige and Skoog (MS)-based medium containing 10 M of 6-benzyladenine (BA) and 10 M of 2,4-dichlorophenoxyacetic acid (2,4-D) or MS supplemented with 5 M BA, 10 M -naphthaleneacetic acid (NAA), 250 mg l^-1 glutamine and 500 mg l^–1 casein hydrolysate and their usage depended on the breeding lines. Multiplication from initiations and in vitro seedlings was the best when the explants were cut longitudinally through the meristem and placed on MS plus 44 M BA. Plantlets were transferred on to hormone -free MS medium with charcoal for rooting.