Effects of Formulation Variables on the Particle Size and Drug Encapsulation of Imatinib-Loaded Solid Lipid Nanoparticles

Imatinib (IMT), an anticancer agent, inhibits receptor tyrosine kinases and is characterized by poor aqueous solubility, extensive first-pass metabolism, and rapid clearance. The aims of the current study are to prepare imatinib-loaded solid lipid nanoparticles (IMT-SLN) and study the effects of associated formulation variables on particle size and drug encapsulation on IMT-SLN using an experimental design. IMT-SLN was optimized by use of a “combo” approach involving Plackett-Burman design (PBD) and Box-Behnken design (BBD). PBD screening resulted in the determination of organic-to-aqueous phase ratio (O/A), drug-to-lipid ratio (D/L), and amount of Tween® 20 (Tw20) as three significant variables for particle size (S _z), drug loading (DL), and encapsulation efficiency (EE) of IMT-SLN, which were used for optimization by BBD, yielding an optimized criteria of O/A?=?0.04, D/L?=?0.03, and Tw20?=?2.50%?w/v. The optimized IMT-SLN exhibited monodispersed particles with a size range of 69.0?±?0.9 nm, ζ-potential of ?24.2?±?1.2 mV, and DL and EE of 2.9?±?0.1 and 97.6?±?0.1%?w/w, respectively. Results of in vitro release study showed a sustained release pattern, presumably by diffusion and erosion, with a higher release rate at pH 5.0, compared to pH 7.4. In conclusion, use of the combo experimental design approach enabled clear understanding of the effects of various formulation variables on IMT-SLN and aided in the preparation of a system which exhibited desirable physicochemical and release characteristics.     

Inhalable Ipratropium Bromide Particle Engineering with Multicriteria Optimization

Spray-dried ipratropium bromide (IPB) microspheres for oral inhalation were engineered using Quality by Design. The interrogation of material properties, process parameters, and critical product quality attributes interplay enabled rational product design. A 2^7–3 screening design exhibited the Maillard reaction between L-leucine (LL) and lactose at studied outlet temperatures (OT) >130°C. A response surface custom design was used in conjunction with multicriteria optimization to determine the operating design space to achieve inhalable microparticles. Statistically significant predictive models were developed for volume median diameter (p?=?0.0001, adjusted R ²? =?0.9938), span (p?=?0.0278, adjusted R ²? =?0.7912), yield (p?=?0.0020, adjusted R ²? =?0.9320), and OT (p?=?0.0082, adjusted R ²? =?0.8768). An independent verification batch confirmed the model’s predictive capability. The prediction and actual values were in good agreement. Particle size and span were 3.32?±?0.09 μm and 1.71?±?0.18, which were 4.7 and 5.3% higher than the predicted values. The process yield was 50.3%, compared to the predicted value of 65.3%. The OT was 100°C versus the predicted value of 105°C. The label strength of IPB microparticles was 99.0 to 105.9% w/w suggesting that enrichment occurred during the spray-drying process. The present study can be utilized to initiate the design of the first commercial IPB dry powder inhaler.     

Effects of adjuvant and conidial concentration on the efficacy of <Emphasis Type="Italic">Beauveria bassiana</Emphasis> for the control of the two spotted spider mite, <Emphasis Type="Italic">Tetranychus urticae</Emphasis>

Greenhouse experiments were conducted on various crops (cucumber, tomato, eggplant, green bean) to ascertain the effects of Break-thru^® (polyether-polymethylsiloxane-copolymer, a silicone surfactant) and an oil emulsion, on Beauveria bassiana (Balsamo) Vuillemin (Bb) applications for the control of the two spotted spider mite, Tetranychus urticae Koch. The objectives were to compare a) the efficacy of Bb control when applied in aqueous Break-thru^® or an oil emulsion; b) the effects of various concentrations of Bb conidia, as affected by each surfactant; and c) the effects of Break-thru^® on the activity of the fungus. Conidia were suspended either in an aqueous Break-thru^® or an emulsifiable formulation at different conidial concentrations (1.05 × 10⁶, 2.1 × 10⁶ and 4.2 × 10⁶ conidia ml^?1) and sprayed onto leaves 2 weeks after artificial pest inoculation. Two sprays were performed, with an interval of one week from one spray to another, and T. urticae population counts (both motile and egg stages) were made on plant leaves 7 days after each spray. Bb conidia in Break-thru^® were more efficacious than conidia in emulsifiable formulation. With the highest rate of conidia (4.2 × 10⁶ conidia ml^?1), mortality of adult mites ranged from 60 ± 4.2 (mean ± SE) to 85.7 ± 4.3% in the Break-thru^® suspension and 39.4 ± 7 to 61.3 ± 6% in the oil emulsion. Leaf damage index was also substantially reduced from 70% in the unsprayed control to 40% by the application of Bb conidia at the highest rate with Break-thru^®. Break-thru^® can be combined with Bb in the integrated management of T. urticae and Isolate R444 is a promising candidate for the control of the pest.     

Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Lipid-Based Terbutaline Sulphate Bi-layer Tablets for Once-Daily Administration

The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Compritol®888 ATO, Precirol® ATO 5, stearic acid, and tristearin, separately, as slowly eroding lipid matrices. A full 4?×?2² factorial design was employed for optimization of the sustained-release layer and to explore the effect of lipid type (X ₁), drug–lipid ratio (X ₂), and filler type (X ₃) on the percentage drug released at 8, 12, and 24 h (Y ₁, Y ₂, and Y ₃) as dependent variables. Sixteen TBS sustained-release matrices (F1–F16) were prepared by melt solid dispersion method. None of the prepared matrices achieved the targeted release profile. However, F2 that showed a relatively promising drug release was subjected to trial and error optimization for the filler composition to develop two optimized matrices (F17 and F18). F18 which consisted of drug–Compritol®888 ATO at ratio (1:6 w/w) and Avicel PH 101/dibasic calcium phosphate mixture of 2:1 (w/w) was selected as sustained-release layer. TBS bi-layer tablets were evaluated for their physical properties, in vitro drug release, effect of storage on drug content, and in vivo performance in rabbits. The bi-layer tablets showed acceptable physical properties and release characteristics. In vivo absorption in rabbits revealed initial high TBS plasma levels followed by sustained levels over 24 h compared to immediate-release tablets.     

Development of a Prolonged-Release Pramipexole Transdermal Patch: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The current study aimed to develop a prolonged-release pramipexole (PPX) transdermal patch for the treatment of Parkinson’s disease. Permeation parameters of PPX were investigated using human cadaver skin. Pramipexole patches were prepared using DURO-TAK^® pressure-sensitive-adhesive (PSA) and evaluated for drug stability, drug loading, in vitro drug release, and in vitro permeation through mouse skin. The results indicated that blends of DURO-TAK^® 87-2852 and DURO-TAK^® 87-2510 were suitable for creating a prolonged-release PPX patch due to their advantages in drug release, drug loading, and stability. The final formulation consisted of 87-2852/87-2510 (70:30), 10% PG, and 15% PPX and showed a cumulative permeation amount of 1497.19?±?102.90 μg/cm² with a continuous flux over 6.0 μg/(cm²·h) across human cadaver skin for 7 days. In vivo studies in rats indicated that PPX patch produced a significantly longer (p?<?0.001) half-life (t _1/2, 75.16?±?17.37 h) and mean residence time (MRT, 135.89?±?24.12 h) relative to oral tablets (Sifrol^®) and had a relative bioavailability of 51.64?±?21.32%. Therefore, this study demonstrated the feasibility of developing a prolonged-release PPX patch, which proposed the potential to serve as an alternate to conventional oral tablets and may therefore improve patient compliance.     

<Emphasis Type="Italic">In Vitro</Emphasis>-<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Novel Co-spray Dried Rifampicin Phospholipid Lipospheres for Oral Delivery

The objective of this study comprises of developing novel co-spray dried rifampicin phospholipid lipospheres (SDRPL) to investigate its influence on rifampicin solubility and oral bioavailability. Solid-state techniques were employed to characterize the liposphere formulation. SDRPL solubility was determined in distilled water. BACTEC 460TB System was employed to evaluate SDRPL antimycobacterial activity. The oral bioavailability of the lipospheres was evaluated in Sprague Dawley rats. Lipospheres exhibited amorphous, smooth spherical morphology with a significant increase (p?<?0.001) in solubility of SDRPL (2:1), 350.9?±?23 versus 105.1?±?12 μg/ml and SDRPL (1:1) 306.4?±?20 versus 105.1?±?12 μg/ml in comparison to rifampicin (RMP). SDRPL exhibited enhanced activity against Mycobacterium tuberculosis, H37Rv strain, with over twofolds less minimum inhibitory concentration (MIC) than the free drug. Lipospheres exhibited higher peak plasma concentration (109.92?±?25 versus 54.31?±?18 μg/ml), faster T _max (two versus four hours), and enhanced area under the curve (AUC_0–∞) (406.92?±?18 versus 147.72?±?15 μg h/L) in comparison to pure RMP. Thus, SDRPL represents a promising carrier system exhibiting enhanced antimycobacterial activity and oral bioavailability of rifampicin.     

Isolation and screening of euryhaline <Emphasis Type="Italic">Tetraselmis</Emphasis> spp. suitable for large-scale outdoor culture in hypersaline media for biofuels

Natural saline lakes in Western Australia were sampled for microalgae species and strains with potential for large-scale outdoor cultivation over a wide range of salinities for biofuels production. Using a rational isolation and screening process, several Tetraselmis strains (Chlorophyta, Chlorodendrales) with a broad range of salinity tolerance were identified and were characterised further for their potential for biofuels production. Specific growth rates increased from 0.8 to 1.2 days^?1 when the medium salinity was decreased from 11 to 3 % (w/v) NaCl (1.88 to 0.51 M NaCl) in batch cultivation mode, thereby indicating quick adaptation to large salinity changes. In general, ash-free dry weight (AFDW), total lipid, protein and carbohydrate contents per cell were highest in the early stages of growth. Salinity increases led to an increase in cell AFDW, with the highest mean maximum of 2555?±?659 pg AFDW.cell^?1 at 11 % (w/v) NaCl in the strains Tetraselmis MUR 167 and MUR 219 which had been in culture for many years, as compared to the mean maximum of 981?±?141 pg AFDW.cell^?1 the in newly isolated strains MUR 230, 231, 232 and 233. Similar observations on total lipid, protein and carbohydrate content per cell were made between the two groups of strains. Overall, all strains yielded high biomass and total lipid productivities over a very wide range of salinities without large variation in their gross biochemical composition and growth pattern. Based on AFDW and total lipid productivity data, the order of preference for selecting strains for further investigation for large-scale culture was MUR 231?>?MUR 233?>?MUR 219?>?MUR 230?>?MUR 232?>?MUR 167. The Tetraselmis spp. were also very competitive as shown by the outdoor cultivation of diatom, Halamphora coffeaeformis MUR 158, in parallel with Tetraselmis sp. MUR 167 which resulted in the diatom being outcompeted by the green alga. Our results demonstrate the high commercial potential of euryhaline Tetraselmis spp. for cultivation over a broad range of salinity in outdoor cultures.     

Swimming exercise to control precocious maturation in male seabass (<Emphasis Type="Italic">Dicentrarchus labrax</Emphasis>)

Background

Male European seabass, already predominant (~?70%) in cultured stocks, show a high incidence (20–30%) of precocious sexual maturation under current aquaculture practices, leading to important economic losses for the industry. In view of the known modulation of reproductive development by swimming exercise in other teleost species, we aimed at investigating the effects of sustained swimming on reproductive development in seabass males during the first year of life in order to determine if swimming could potentially reduce precocious sexual maturation.

Methods

Pre-pubertal seabass (3.91?±?0.22 g of body weight (BW)) were subjected to a 10 week swimming regime at their optimal swimming speed (U_opt) in an oval-shaped Brett-type flume or kept at rest during this period. Using Blazka-type swim tunnels, U_opt was determined three times during the course of the experiment: 0.66 m s^??1 at 19?±?1 g BW, 10.2?±?0.2 cm of standard length (SL) (week 1); 0.69 m s^??1 at 38?±?3 g BW, 12.7?±?0.3 cm SL (week 5), and also 0.69 m s^??1 at 77?±?7 g BW, 15.7?±?0.5 cm SL (week 9). Every 2 weeks, size and gonadal weight were monitored in the exercised (N?=?15) and non-exercised fish (N?=?15). After 10 weeks, exercised and non-exercised males were sampled to determine plasma 11-ketotestosterone levels, testicular mRNA expression levels of genes involved in steroidogenesis and gametogenesis by qPCR, as well as the relative abundance of germ cells representing the different spermatogenic stages by histological examination.

Results

Our results indicate that sustained swimming exercise at U_opt delays testicular development in male European seabass as evidenced by decreased gonado-somatic index, slower progression of testicular development and by reduced mRNA expression levels of follicle stimulating hormone receptor (fshR), 3-beta-hydroxysteroid dehydrogenase (3βhsd), 11-beta hydroxysteroid dehydrogenase (11βhsd), estrogen receptor-beta (erβ2), anti-mullerian hormone (amh), structural maintenance of chromosomes protein 1B (smc1β), inhibin beta A (inhba) and gonado-somal derived factor 1 (gsdf1) in exercised males as compared with the non-exercised males.

Conclusions

Swimming exercise may represent a natural and non-invasive tool to reduce the incidence of sexually precocious males in seabass aquaculture.

     

Preparation and Optimization of Fast-Disintegrating Tablet Containing Naratriptan Hydrochloride Using D-Optimal Mixture Design

Optimization of a lyophilized fast-disintegrating tablet (LFDT) formulation containing naratriptan hydrochloride, an antimigraine drug, was the foremost objective of the study, aiming in achieving fast headache pain relief. The Design-Expert® v10 software was used to generate formulations using D-optimal mixture design with four components: gelatin (X₁), hydrolyzed gelatin (X₂), glycine (X₃), and mannitol (X₄) of total solid material (TSM) w/w. The effect of the relative proportion of each component was determined on friability (Y₁), hardness (Y₂), and in vitro disintegration time (Y₃), which was then applied for formulation optimization. In addition, their effect on tablet porosity was determined via scanning electron microscopy (SEM). Drug-excipient interaction was evaluated using differential scanning calorimetry (DSC). A comparative dissolution study against the conventional tablets was studied. Accelerated stability study was carried out in (Al/Al) and (Al/PVC) blister packs. An in vivo pharmacokinetic study was carried out to compare the optimized formulation and the conventional tablets. The optimized formulation’s responses were 0.30%, 3.4 kg, and 6.12 s for Y₁, Y₂, and Y₃, respectively. No drug-excipient interaction was specified via DSC. The optimized formulation exhibited porous structure as determined via SEM. Dissolution study demonstrated complete dissolution within 1.5 min. Study indicated stability for 78 months in (Al/Al) blister packs. In vivo pharmacokinetic study demonstrated that C_max, AUC_last, and AUC_inf were significantly higher for the developed formulation. As well, the T_max was 1 h earlier than that of convenient tablet. An LFDT would achieve a faster onset of action for naratriptan compared to other formulations.     

Design and Evaluation of a Novel Felbinac Transdermal Patch: Combining Ion-Pair and Chemical Enhancer Strategy

The aim of this study was to design a novel felbinac (FEL) patch with significantly higher (P?<?0.05) skin permeation amount than the commercial product SELTOUCH® using ion-pair and chemical enhancer strategy, overcoming the disadvantage of the large application area of SELTOUCH®. Six complexes of FEL with organic amines diethylamine (DEA), triethylamine (TEA), N-(2′-hydroxy-ethanol)-piperdine (HEPP), monoethanolamine (MEtA), diethanolamine (DEtA), and triethanolamine (TEtA) were prepared by ion-pair interaction, and their formation were confirmed by differential scanning calorimetry (DSC), powder X-ray diffraction (pXRD), infared spectroscopy (IR), and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Subsequently, the effect of ion-pair complexes and chemical enhancers were investigated through in vitro and in vivo experiments using rabbit abdominal skin. Results showed that FEL-TEA was the most potential candidate both in isopropyl palmitate (IPP) solution and transdermal patches. Combining use of 10% N-dodecylazepan-2-one (Azone), the optimized FEL-TEA patch achieved a flux of 18.29?±?2.59 μg/cm²/h, which was twice the amount of the product SELTOUCH® (J?=?9.18?±?1.26 μg/cm²/h). Similarly, the area under the concentration curve from time 0 to time t (AUC_0-t ) in FEL-TEA patch group (15.94?±?3.58 h.μg/mL) was also twice as that in SELTOUCH® group (7.31?±?1.16 h.μg/mL). Furthermore, the in vitro skin permeation results of FEL-TEA patch was found to have a good correlation with the in vivo absorption results in rabbit. These findings indicated that a combination of ion-pair and chemical enhancer strategy could be useful in developing a novel transdermal patch of FEL.     

Inheritance pattern and genetic correlations among growth and wood quality traits in Para rubber tree (<Emphasis Type="Italic">Hevea brasiliensis</Emphasis>) and implications for breeding

Inheritance pattern of wood traits viz. specific gravity, fibre dimensions and fibre-derived biometrical indices and their interactions among themselves and with that of growth are reported in Hevea brasiliensis. Girth (h² =???0.02?±?0.44 to h² =?0.35?±?0.24) showed moderate genetic control. Among wood traits, specific gravity (h²?=?0.15?±?0.31 to h² =?0.33?±?0.28) was found to be under moderate genetic control. Fibre traits viz., fibre length (h² =???0.26?±?0.30 to h² =?0.50?±?0.34), fibre diameter (h² =?0.19?±?0.49 to h² =?0.70?±?0.11), fibre lumen diameter (h² =???0.18?±?0.35 to h² =?0.56?±?0.47) and fibre wall thickness (h² =???5.17?±?5.26 to h² =?0.50?±?0.50) were under moderate to strong genetic control. Among fibre-derived indices, flexibility coefficient (h² =?0.48?±?0.21 to h² =?0.89?±?0.29) showed moderate to very strong genetic control. The Runkel ratio (h² =???0.40?±?0.27 to h² =?0.42?±?0.29) and slenderness ratio (h² =???0.36?±?0.29 to h² =?0.43?±?0.28) showed moderate genetic control. Girth showed very strong positive genetic correlation with fibre wall thickness and strong positive correlation with fibre width indicating scope of indirect selection potential for these traits. Wood specific gravity was not correlated with either girth or fibre traits. Hence, it would be possible to concomitantly improve growth and fibre traits without adversely affecting wood specific gravity. Moderate to very high estimates of heritability for fibre traits, girth and specific gravity indicated that considerable genetic gain can be realised for these traits. Implications of the above findings in genetic improvement of wood in Hevea are discussed.     

<Emphasis Type="Italic">Plectosphaerella cucumerina</Emphasis> as a bioherbicide for <Emphasis Type="Italic">Cirsium arvense</Emphasis>: proof of concept

Plectosphaerella cucumerina (Lindf.) W. Gams was evaluated as a bioherbicide for Cirsium arvense L. (Scop.) using a Canadian and a New Zealand isolate. Both isolates defoliated C. arvense when applied at 10¹³ conidia ha^?1 in water volumes ranging from 250 to 6400 l ha^?1 with a rapid decline in effect with declining conidial dose. Repeat application and the addition of the adjuvant Pulse^® penetrant to the conidial suspension increased the disease severity in C. arvense. Maximum disease occurred at 20 °C with a 48 h post-application dew period. The experiments demonstrate that P. cucumerina can defoliate C. arvense under the environmental conditions of temperate pastures where the weed is problematic. The results also show that modifications to formulation and strategic application may reduce the 48 h dew period requirement and risk to non-target species respectively, supporting the conclusion that the fungus has potential as a bioherbicide for C. arvense.     

Design and Evaluation of Novel Solid Self-Nanodispersion Delivery System for Andrographolide

Poorly water-soluble drugs offer challenges in developing a formulation product with adequate bioavailability. This study took advantage of the features of nanocrystals and direct compression technologies to develop a novel solid self-nanodispersion delivery system for andrographolide (Andro) in order to increase its dissolution rate for enhancing bioavailability. Andro nanosuspensions (Andro-NS) with a particle size of about 500 nm were prepared by homogenization technology and further converted into dried nanocrystal particles (Andro-NP) via spray-drying. The solid self-nanodispersion delivery system (Andro-SNDS)-loaded Andro-NP was prepared via direct compression technology. The DSC and PXRD results demonstrated that the Andro nanocrystals retained its original crystallinity. The dissolution of the Andro-SNDS formulation was 85.87% in pure water over 30 min, better than those of the coarse Andro and physical mixture of Andro and stabilizer. And the C _max (299.32?±?78.54 ng/mL) and AUC_0-∞ (4440.55?±?764.13 mg/L?·?h) of the Andro-SNDS formulation were significantly higher (p?<?0.05) than those of the crude Andro (77.52?±?31.73 ng/mL and 1437.79?±?354.25 mg/L?·?h). The AUC of the Andro-SNDS was 3.09 times as high as that of the crude Andro. This study illustrated a novel approach to combine the features of nanocrystals and composite particles used to improve oral bioavailability of poorly soluble drug.     

Evaluation of growth and phycobiliprotein composition of cyanobacteria isolates cultivated in different nitrogen sources

Phycobiliproteins, light-harvesting pigments found in cyanobacteria and in some eukaryotic algae, have numerous commercial applications in food, cosmetic, and pharmaceutical industries. Colorant production from cyanobacteria offers advantages over their production from higher plants, as cyanobacteria have fast growth rate and high photosynthetic efficiency and require less space. In this study, three cyanobacteria strains were studied for phycobiliprotein production and the influence of sodium nitrate, potassium nitrate and ammonium chloride on the growth and phycobiliprotein composition of the strains were evaluated. In the batch culture period of 12 days, Phormidium sp. and Pseudoscillatoria sp. were able to utilize all tested nitrogen sources; however, ammonium chloride was the best nitrogen source for both strains to achieve maximum growth rate μ?=?0.284?±?0.03 and μ?=?0.274?±?0.13 day^?1, chlorophyll a 16.2?±? 0.5 and 12.2?±? 0.2 mg L^?1, and phycobiliprotein contents 19.38?±?0.09 and 19.99?±?0.14% of dry weight, whereas, for Arthrospira platensis, the highest growth rate of μ?=?0.304?±?0.0 day^?1, chlorophyll a 19.1?±?0.5 mg L^?1, and phycobiliprotein content of 22.27?±?0.21% of dry weight were achieved with sodium nitrate. The phycocyanin from the lyophilized cyanobacterial biomass was extracted using calcium chloride and food grade purity (A₆₂₀/A₂₈₀ ratio >?0.7) was achieved. Furthermore, phycocyanin was purified using two-step chromatographic method and the analytical grade purity (A₆₂₀/A₂₈₀ ratio >?4) was attained. SDS-PAGE demonstrated the purity and presence of two bands corresponding to α- and β-subunits of the C-phycocyanin. The results showed that Phormidium sp. and Pseudoscillatoria sp. could be good candidates for phycocyanin production.     

Oral fast-dissolving films containing lutein nanocrystals for improved bioavailability: formulation development, <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> evaluation

Lutein is widely used as diet supplement for prevention of age-related macular degeneration. However, the application and efficacy of lutein in food and nutritional products has been hampered due to its poor solubility and low oral bioavailability. This study aimed to develop and evaluate the formulation of oral fast-dissolving film (OFDF) containing lutein nanocrystals for enhanced bioavailability and compliance. Lutein nanocrystals were prepared by anti-solvent precipitation method and then encapsulated into the films by solvent casting method. The formulation of OFDF was optimized by Box-Behnken Design (BBD) as follows: HPMC 2.05% (w/v), PEG 400 1.03% (w/v), Cremophor EL 0.43% (w/v). The obtained films exhibited uniform thickness of 35.64 ± 1.64 μm and drug content of 0.230 ± 0.003 mg/cm² and disintegrated rapidly in 29 ± 8 s. The nanocrystal-loaded films with reconstituted particle size of 377.9 nm showed better folding endurance and faster release rate in vitro than the conventional OFDFs with raw lutein. The microscope images, thermograms, and diffractograms indicated that lutein nanocrystals were highly dispersed into the films. After administrated to SD rats, t _max was decreased from 3 h for oral solution formulation to less than 0.8 h for OFDF formulations, and C _max increased from 150 ng/mL for solution to 350 ng/mL for conventional OFDF or 830 ng/mL for nanocrystal OFDF. The AUC _0-24h of conventional or nanocrystal OFDF was 1.37 or 2.08-fold higher than that of the oral solution, respectively. These results suggested that drug nanocrystal-loaded OFDF can be applied as a promising approach for enhanced bioavailability of poor soluble drugs like lutein.     

Toxicity of an Annonin-Based Commercial Bioinsecticide Against Three Primary Pest Species of Stored Products

The effects of a bioinsecticide formulation based on extract of Annona squamosa L. (Annonaceae) containing 10,000 mg L^?1 of acetogenin annonin as the main active ingredient were investigated against three primary pest species of stored grains in Brazil [maize weevil Sitophilus zeamais Motschulsky (Coleoptera: Curculionidae), Mexican bean weevil Zabrotes subfasciatus (Boheman) (Coleoptera: Chrysomelidae: Bruchinae), and cowpea weevil Callosobruchus maculatus (Fabricius) (Coleoptera: Chrysomelidae: Bruchinae)] by means of residual contact bioassays. In a concentration-dependent manner, the annonin-based commercial bioinsecticide caused significant adult mortality of C. maculatus (LC₅₀ = 6890 μL kg^?1), S. zeamais (LC₅₀ = 2781 μL kg^?1), and Z. subfasciatus (LC₅₀ = 2120 μL kg^?1) after 120 h of residual contact exposure. In addition to acute toxicity, the tested bioinsecticide also promoted a significant reduction of the number of eggs laid by females of C. maculatus (EC₅₀ = 5949.7 μL kg^?1) and Z. subfasciatus (EC₅₀ = 552.7 μL kg^?1). Moreover, the bioinsecticide significantly reduced the number of emerged insects (F₁ generation) of C. maculatus (EC₅₀ = 2763.0 μL kg^?1), S. zeamais (EC₅₀ = 1380.8 μL kg^?1), and Z. subfasciatus (EC₅₀ = 561.5 μL kg^?1). The bioinsecticide also reduced the percentage of damaged grains for the three pest species studied, and its grain-protectant properties are comparable to or superior in efficacy in relation to a diatomaceous earth-based insecticide (Insecto® at 1000 mg kg^?1) used as a positive control. Thus, this standardized formulation has promising bioactivity against stored insect species and can be a useful component for IPM of stored grains in Brazil and elsewhere.     

Co-inoculation with <Emphasis Type="Italic">Enterobacter</Emphasis> and Rhizobacteria on Yield and Nutrient Uptake by Wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) in the Alluvial Soil Under Indo-Gangetic Plain of India

The aim of this work was to evaluate the effects of co-inoculation with phosphate-solubilizing and nitrogen-fixing rhizobacteria on growth promotion, yield, and nutrient uptake by wheat. Out of twenty-five bacteria isolated from the rhizosphere soils of cereal, vegetable, and agro-forestry plants in eastern Uttar Pradesh, three superior most plant growth-promoting (PGP) isolates were characterized as Serratia marcescens, Microbacterium arborescens, and Enterobacter sp. based on their biochemical and 16S rDNA gene sequencing data and selected them for evaluating their PGP effects on growth and yield of wheat. Among them, Enterobacter sp. and M. arborescens fixed significantly higher amounts (9.32?±?0.57 and 8.89?±?0.58 mg Ng^?1 carbon oxidized, respectively) of atmospheric nitrogen and produced higher amounts (27.06?±?1.70 and 26.82?±?1.63 TP 100 µg mL^?1, respectively) of IAA in vitro compared to S. marcescens (8.32?±?0.39 mg Ng^?1 carbon oxidized and 21.29?±?0.99 TP 100 µg mL^?1). Although both M. arborescens and S. marcescens solubilized remarkable amounts of phosphate from tricalcium phosphate likely through production of organic acids, however, Enterobacter sp. was inactive. The effects of these three rhizobacteria were evaluated on wheat in alluvial soils of the Indo-Gangetic Plain by inoculation of plants with bacterial isolates either alone or in combinations in both pot and field conditions for two successive years. Rhizobacterial inoculation either alone or in consortium of varying combinations significantly (P?≤?0.05) increased growth and yield of wheat compared to mock inoculated controls. A consortium of two or three rhizobacterial isolates also significantly increased plant height, straw yield, grain yield, and test weight of wheat in both pot and field trials compared to single application of any of these isolates. Among the rhizobacterial treatment, co-inoculation of three rhizobacteria (Enterobacter, M. arborescens and S. marcescens) performed best in promotion of growth, yield, and nutrient (N, P, Cu, Zn, Mn, and Fe) uptake by wheat. Taken together, our results suggest that co-inoculation of Enterobacter with S. marcescens and M. arborescens could be used for preparation of an effective formulation of PGP consortium for eco-friendly and sustainable production of wheat.     

Maternal care,larviparous and oviparous reproduction of <Emphasis Type="Italic">Hypoaspis larvicolus</Emphasis> (Acari: Laelapidae) feeding on astigmatid mites

Hypoaspis larvicolus (Acari: Laelapidae) (first report from Turkey) occurred together with Sancassania polyphyllae (Acari: Acaridae) on the larvae of the scarab beetle, Polyphylla fullo (Coleoptera: Scarabaeidae), that were feeding on the roots of strawberry in Aydin, Turkey. Laboratory studies were conducted to (1) observe whether H. larvicolus feeds and completes its life cycle on the various stages of S. polyphyllae or other astigmatid mites, such as Acarus siro, Carpoglyphus lactis and Tyrophagus putrescentiae (Acaridae), and to determine its population growth when feeding on these prey, and (2) to determine development periods, longevity and fecundity of H. larvicolus feeding on C. lactis. Hypoaspis larvicolus females did not feed on S. polyphyllae, but fed, developed and reproduced when A. siro, C. lactis or T. putrescentiae were provided as prey. Hypoaspis larvicolus is larviparous as well as oviparous. The female lays eggs or gives birth to larvae. If a female gives birth to a larva, it is attached under the female’s venter for 1–2 days, a phenomenon recorded for the first time in Hypoaspis; in fact, for the first time in mites. The results of the population growth experiments revealed that H. larvicolus feeding on C. lactis produced the highest number of eggs, juveniles and adults. The developmental periods of H. larvicolus feeding on C. lactis at life-cycle path I (larva to adult) and II (egg to adult) were 12.2?±?0.3 and 15.6?±?0.6 days (females) and 19.5?±?0.2 and 20.9?±?0.4 days (males), respectively. Longevity of females versus males of H. larvicolus was 120.6?±?7.2 versus 91.6?±?13.1 days (life cycle I) and 110.0?±?27.7 versus 118.3?±?10.9 days (life cycle II), respectively.