Refined structure of porcine cytosolic adenylate kinase at 2.1 A resolution

The crystal structure of porcine cytosolic adenylate kinase has been established at 2.1 A resolution using a restrained least-squares refinement method. Based on 11,251 independent reflections of better than 10 A resolution, a final R-factor of 19.3% was obtained with a model obeying standard geometry within 0.026 A in bond lengths and 3.3 degrees in bond angles. In comparison with the previous structure at 3 A resolution, there is a significant improvement. The high resolution structure has been used to rationalize the strictly conserved residues in the adenylate kinase family. Among these is the glycine-rich loop, which forms a giant anion hole accommodating a sulfate ion which mimics a phosphoryl group of a substrate. Such a structure seems to occur in a large group of mononucleotide binding proteins. Moreover, a conserved cis-proline has been detected in the active center. A structural comparison with the complex between adenylate kinase from yeast and a substrate-analog at medium resolution indicates that this kinase performs appreciable mechanical movements during a catalytic cycle. The reported structure presumably represents an open form of the enzyme, similar to that in solution in the absence of substrates. However, since there are large intermolecular contacts in the crystal, some deviation from the solution structure has to be expected.     

Refined x-ray structure of papain.E-64-c complex at 2.1-A resolution.

E-64-c, a synthetic cysteine protease inhibitor designed from E-64, binds to papain through a thioether covalent bond. The x-ray diffraction data for 2.1-A resolution were used to determine the three-dimensional structure of this complex and refined it to R = 0.159. 0.159. In the complex structure, the configurational conversion from S to R took place on the epoxy carbon of E-64-c, implying that the nucleophilic attack of the Cys-25 thiol group occurs at the opposite side of the epoxy oxygen atom. The leucyl and isoamylamide groups of E-64-c were strongly fixed to papain S subsites by specific interactions, including hydrogen bonding to the Gly-66 residue. The carboxyl-terminal anion of E-64-c formed an electrostatic interaction with the protonated His-159 imidazole ring (O-...HN+ = 3.76 A) and consequently prevented the participation of this residue in the hydrolytic charge-relay system. No significant distortion caused by the binding of E-64-c was shown in the secondary structure of papain. It is important to note that inhibitor and substrate have opposite binding modes for the peptide groups. The possible relationship between the binding mode and inhibitory activity is discussed on the basis of the crystal structure of this complex.     

X-ray analyses of aspartic proteinases. The three-dimensional structure at 2.1 A resolution of endothiapepsin

The molecular structure of endothiapepsin (EC 3.4.23.6), the aspartic proteinase from Endothia parasitica, has been refined to a crystallographic R-factor of 0.178 at 2.1 A resolution. The positions of 2389 protein non-hydrogen atoms have been determined and the present model contains 333 solvent molecules. The structure is bilobal, consisting of two predominantly beta-sheet domains that are related by an approximate 2-fold axis. Of approximately 170 residues, 65 are topologically equivalent when one lobe is superimposed on the other. Twenty beta-strands are arranged as five beta-sheets and are connected by regions involving 29 turns and four helices. A central sheet involves three antiparallel strands from each lobe organized around the dyad axis. Each lobe contains a further local dyad that passes through two sheets arranged as a sandwich and relates two equivalent motifs of four antiparallel strands (a, b, c, d) followed by a helix or an irregular helical region. Sheets 1N and 1C, each contain two interpenetrating psi structures contributed by strands c,d,d' and c',d',d, which are related by the intralobe dyad. A further sheet, 2N or 2C, is formed from two extended beta-hairpins from strands b,c and b',c' that fold above the sheets 1N and 1C, respectively, and are hydrogen-bonded around the local intralobe dyad. Asp32 and Asp215 are related by the interlobe dyad and form an intricate hydrogen-bonded network with the neighbouring residues and comprise the most symmetrical part of the structure. The side-chains of the active site aspartate residues are held coplanar and the nearby main chain makes a "fireman's grip" hydrogen-bonding network. Residues 74 to 83 from strands a'N and b'N in the N-terminal lobe form a beta-hairpin loop with high thermal parameters. This "flap" projects over the active site cleft and shields the active site from the solvent region. Shells of water molecules are found on the surface of the protein molecule and large solvent channels are observed within the crystal. There are only three regions of intermolecular contacts and the crystal packing is stabilized by many solvent molecules forming a network of hydrogen bonds. The three-dimensional structure of endothiapepsin is found to be similar to two other fungal aspartic proteinases, penicillopepsin and rhizopuspepsin. Even though sequence identities of endothiapepsin with rhizopuspepsin and penicillopepsin are only 41% and 51%, respectively, a superposition of the three-dimensional structures of these three enzymes shows that 237 residues (72%) are within a root-mean-square distance of 1.0 A.     

Refined crystal structure of cytoplasmic malate dehydrogenase at 2.5-A resolution

The molecular structure of cytoplasmic malate dehydrogenase from pig heart has been refined by alternating rounds of restrained least-squares methods and model readjustment on an interactive graphics system. The resulting structure contains 333 amino acids in each of the two subunits, 2 NAD molecules, 471 solvent molecules, and 2 large noncovalently bound molecules that are assumed to be sulfate ions. The crystallographic study was done on one entire dimer without symmetry restraints. Analysis of the relative position of the two subunits shows that the dimer does not obey exact 2-fold rotational symmetry; instead, the subunits are related by a 173 degrees rotation. The structure results in a R factor of 16.7% for diffraction data between 6.0 and 2.5 A, and the rms deviations from ideal bond lengths and angles are 0.017 A and 2.57 degrees, respectively. The bound coenzyme in addition to hydrophobic interactions makes numerous hydrogen bonds that either are directly between NAD and the enzyme or are with solvent molecules, some of which in turn are hydrogen bonded to the enzyme. The carboxamide group of NAD is hydrogen bonded to the side chain of Asn-130 and via a water molecule to the backbone nitrogens of Leu-157 and Asp-158 and to the carbonyl oxygen of Leu-154. Asn-130 is one of the corner residues in a beta-turn that contains the lone cis peptide bond in cytoplasmic malate dehydrogenase, situated between Asn-130 and Pro-131. The active site histidine, His-186, is hydrogen bonded from nitrogen ND1 to the carboxylate of Asp-158 and from its nitrogen NE2 to the sulfate ion bound in the putative substrate binding site. In addition to interacting with the active site histidine, this sulfate ion is also hydrogen bonded to the guanidinium group of Arg-161, to the carboxamide group of Asn-140, and to the hydroxyl group of Ser-241. It is speculated that the substrate, malate or oxaloacetate, is bound in the sulfate binding site with the substrate 1-carboxyl hydrogen bonded to the guanidinium group of Arg-161.     

The three-dimensional structures of methanol dehydrogenase from two methylotrophic bacteria at 2.6-A resolution.

The structures of methanol dehydrogenase (MEDH) from two closely related methylotrophic bacteria, Methylophilus methylotrophus and W3A1, have been determined at 2.6-A resolution. The molecule, a quinoprotein of molecular mass of about 138 kDa, contains two heavy (H) and two light (L) subunits of unknown sequence and two molecules of noncovalently associated pyrroloquinoline quinone. The two enzymes crystallize isomorphously in space group P2(1) with one H2L2 heterotetramer in the asymmetric unit. The electron density map of the M. methylophilus enzyme was obtained by multiple isomorphous replacement with anomalous scattering and improved by solvent leveling and electron density averaging. For model building, the amino acid sequence of MEDH from Paracoccus denitrificans for the H subunit and from Methylobacterium extorquens AM1 for the L subunit were used to represent the unknown amino acid sequence. At the present time, 579 and 57 amino acid residues for the large and small subunits, respectively, have been fitted into the map. The phases for MEDH from M. methylophilus were used directly to analyze the W3A1 structure, and both structures were refined to R-factors (where R = sigma[Fo-Fc[/sigma Fo) of 0.277 and 0.266, respectively. The L subunit contains a long alpha-helix and an extended N-terminal segment, both lying on the molecular surface of the H subunit. The H subunit contains eight antiparallel beta-sheets, each consisting of four strands arranged topologically like the letter W. The eight Ws are arranged circularly, forming the main disc-shaped body of the subunit, with some short helices and loops connecting the consecutive Ws, as well as some excursions within and between some of the Ws. The pyrroloquinoline quinone prosthetic group is located in the central channel of the large subunit near the surface of the molecule. The topology of the eight-W folding unit is similar to those of the six- and seven-W folding units previously reported for three other proteins, neuraminidase, methylamine dehydrogenase, and galactose oxidase.     

Structure of betaine aldehyde dehydrogenase at 2.1 A resolution.

The three-dimensional structure of betaine aldehyde dehydrogenase, the most abundant aldehyde dehydrogenase (ALDH) of cod liver, has been determined at 2.1 A resolution by the X-ray crystallographic method of molecular replacement. This enzyme represents a novel structure of the highly multiple ALDH, with at least 12 distinct classes in humans. This betaine ALDH of class 9 is different from the two recently determined ALDH structures (classes 2 and 3). Like these, the betaine ALDH structure has three domains, one coenzyme binding domain, one catalytic domain, and one oligomerization domain. Crystals grown in the presence or absence of NAD+ have very similar structures and no significant conformational change occurs upon coenzyme binding. This is probably due to the tight interactions between domains within the subunit and between subunits in the tetramer. The oligomerization domains link the catalytic domains together into two 20-stranded pleated sheet structures. The overall structure is similar to that of the tetrameric bovine class 2 and dimeric rat class 3 ALDH, but the coenzyme binding with the nicotinamide in anti conformation, resembles that of class 2 rather than of class 3.     

Refined structure of alpha beta-tubulin at 3.5 A resolution.

We present a refined model of the alpha beta-tubulin dimer to 3.5 A resolution. An improved experimental density for the zinc-induced tubulin sheets was obtained by adding 114 electron diffraction patterns at 40-60 degrees tilt and increasing the completeness of structure factor amplitudes to 84.7 %. The refined structure was obtained using maximum-likelihood including phase information from experimental images, and simulated annealing Cartesian refinement to an R-factor of 23.2 and free R-factor of 29.7. The current model includes residues alpha:2-34, alpha:61-439, beta:2-437, one molecule of GTP, one of GDP, and one of taxol, as well as one magnesium ion at the non-exchangeable nucleotide site, and one putative zinc ion near the M-loop in the alpha-tubulin subunit. The acidic C-terminal tails could not be traced accurately, neither could the N-terminal loop including residues 35-60 in the alpha-subunit. There are no major changes in the overall fold of tubulin with respect to the previous structure, testifying to the quality of the initial experimental phases. The overall geometry of the model is, however, greatly improved, and the position of side-chains, especially those of exposed polar/charged groups, is much better defined. Three short protein sequence frame shifts were detected with respect to the non-refined structure. In light of the new model we discuss details of the tubulin structure such as nucleotide and taxol binding sites, lateral contacts in zinc-sheets, and the significance of the location of highly conserved residues.     

Structure of human oxyhaemoglobin at 2.1 A resolution

The structure of human oxyhaemoglobin was determined by single crystal X-ray analysis at 2.1 A resolution. Data were collected on an Arndt-Wonacott camera at -2 degrees C. The structure was refined to an R factor of 0.223 by the Jack-Levitt method, starting from Baldwin's model of human carbon monoxide haemoglobin. The active sites in the alpha and beta subunit are distinct. The iron atoms are 0.16(8) A and 0.00(8) A from the mean plane of the porphyrin carbons and nitrogens (0.12(8) A and -0.11(8) A from the mean plane of the porphyrin nitrogens) in the alpha and beta subunit, respectively, in correlation with the orientation of HisF8 relative to the porphyrin nitrogens. The haem group appears to be nearly planar in the alpha subunit but ruffled in the beta subunit. The Fe-O(1)-O(2) angles are 153(7) degrees and 159(12) degrees in the alpha and beta subunit, respectively. The oxygen molecule forms a hydrogen bond to N epsilon of HisE7 in the alpha, but either none or a weak one in the beta subunit. The following bond lengths were found: Fe-N epsilon (HisF8) = 1.94(9) A (alpha) and 2.07(9) A (beta); Fe-O(1) = 1.66(8) A (alpha) and 1.87(13) A (beta); Fe-Nporph (mean = 1.99(5) A (alpha) and 1.96(6) A (beta). These dimensions agree with the values obtained in oxymyoglobin and model compounds. The C-terminal residues, ArgHC3(141 alpha) and HisHC3(146 beta), are relatively delocalized, and their positions do not enable them to form the intersubunit salt bridges in which they are involved in deoxyhaemoglobin. The penultimate tyrosine residues, TyrHC2 140 alpha and 145 beta, are relatively localized and maintain the hydrogen bonds to the carbonyl oxygens of ValFG5 (93 alpha and 98 beta), with only minor variations compared to their geometry in deoxyhaemoglobin. TyrHC2(145 beta), however, alternates between a major and a minor site, in conjunction with CysF9(93 beta), both sharing the internal pocket between the F and H helices while in the major conformation. This suggests that the role of the penultimate tyrosines in the allosteric mechanism may differ from that previously proposed by Perutz. The overall quaternary structure of oxyhaemoglobin is identical, within experimental error, to that of carbon monoxide haemoglobin, and thus confirms the applicability of the allosteric mechanisms proposed by Perutz and Baldwin & Chothia to the process of oxygen binding.     

Refined 2.5 A structure of murine adenosine deaminase at pH 6.0.

The X-ray structure of murine adenosine deaminase complexed with the transition-state analogue 6-hydroxyl-1,6-dihydropurine ribonucleoside has been determined from a single crystal grown at pH 4.2 and transferred to mother liquor of increasing pH up to a final pH of 6.0 prior to data collection. The structure has been refined to 2.5 A to a final crystallographic R-factor of 20% using phases from the previously refined 2.4 A structure at pH 4.2. Kinetic measurements show that the enzyme is only 20% active at pH 4.2 whereas it is fully active between pH 6.0 and pH 8.5. The refined structures at either pH are essentially the same. Consideration of the pKa values of the key catalytic residues and the mechanism proposed on the basis of the structure suggests that the ionization state of these residues is largely responsible for the pH dependence on activity.     

Refined structure of dimeric diphtheria toxin at 2.0 A resolution.

The refined structure of dimeric diphtheria toxin (DT) at 2.0 A resolution, based on 37,727 unique reflections (F > 1 sigma (F)), yields a final R factor of 19.5% with a model obeying standard geometry. The refined model consists of 523 amino acid residues, 1 molecule of the bound dinucleotide inhibitor adenylyl 3'-5' uridine 3' monophosphate (ApUp), and 405 well-ordered water molecules. The 2.0-A refined model reveals that the binding motif for ApUp includes residues in the catalytic and receptor-binding domains and is different from the Rossmann dinucleotide-binding fold. ApUp is bound in part by a long loop (residues 34-52) that crosses the active site. Several residues in the active site were previously identified as NAD-binding residues. Glu 148, previously identified as playing a catalytic role in ADP-ribosylation of elongation factor 2 by DT, is about 5 A from uracil in ApUp. The trigger for insertion of the transmembrane domain of DT into the endosomal membrane at low pH may involve 3 intradomain and 4 interdomain salt bridges that will be weakened at low pH by protonation of their acidic residues. The refined model also reveals that each molecule in dimeric DT has an "open" structure unlike most globular proteins, which we call an open monomer. Two open monomers interact by "domain swapping" to form a compact, globular dimeric DT structure. The possibility that the open monomer resembles a membrane insertion intermediate is discussed.     

Refined crystal structure of ascorbate oxidase at 1.9 A resolution.

The crystal structure of the fully oxidized form of ascorbate oxidase (EC 1.10.3.3) from Zucchini has been refined at 1.90 A (1 A = 0.1 nm) resolution, using an energy-restrained least-squares refinement procedure. The refined model, which includes 8764 protein atoms, 9 copper atoms and 970 solvent molecules, has a crystallographic R-factor of 20.3% for 85,252 reflections between 8 and 1.90 A resolution. The root-mean-square deviation in bond lengths and bond angles from ideal values is 0.011 A and 2.99 degrees, respectively. The subunits of 552 residues (70,000 Mr) are arranged as tetramers with D2 symmetry. One of the dyads is realized by the crystallographic axis parallel to the c-axis giving one dimer in the asymmetric unit. The dimer related about this crystallographic axis is suggested as the dimer present in solution. Asn92 is the attachment site for one of the two N-linked sugar moieties, which has defined electron density for the N-linked N-acetyl-glucosamine ring. Each subunit is built up by three domains arranged sequentially on the polypeptide chain and tightly associated in space. The folding of all three domains is of a similar beta-barrel type and related to plastocyanin and azurin. An analysis of intra- and intertetramer hydrogen bond and van der Waals interactions is presented. Each subunit has four copper atoms bound as mononuclear and trinuclear species. The mononuclear copper has two histidine, a cysteine and a methionine ligand and represents the type-1 copper. It is located in domain 3. The bond lengths of the type-1 copper centre are comparable to the values for oxidized plastocyanin. The trinuclear cluster has eight histidine ligands symmetrically supplied from domain 1 and 3. It may be subdivided into a pair of copper atoms with histidine ligands whose ligating N-atoms (5 NE2 atoms and one ND1 atom) are arranged trigonal prismatic. The pair is the putative type-3 copper. The remaining copper has two histidine ligands and is the putative spectroscopic type-2 copper. Two oxygen atoms are bound to the trinuclear species as OH- or O2- and bridging the putative type-3 copper pair and as OH- or H2O bound to the putative type-2 copper trans to the copper pair. The bond lengths within the trinuclear copper site are similar to comparable binuclear model compounds. The putative binding site for the reducing substrate is close to the type-1 copper.(ABSTRACT TRUNCATED AT 400 WORDS)     

Refined structure of monomeric diphtheria toxin at 2.3 A resolution.

The structure of toxic monomeric diphtheria toxin (DT) was determined at 2.3 A resolution by molecular replacement based on the domain structures in dimeric DT and refined to an R factor of 20.7%. The model consists of 2 monomers in the asymmetric unit (1,046 amino acid residues), including 2 bound adenylyl 3'-5' uridine 3' monophosphate molecules and 396 water molecules. The structures of the 3 domains are virtually identical in monomeric and dimeric DT; however, monomeric DT is compact and globular as compared to the "open" monomer within dimeric DT (Bennett MJ, Choe S, Eisenberg D, 1994b, Protein Sci 3:0000-0000). Detailed differences between monomeric and dimeric DT are described, particularly (1) changes in main-chain conformations of 8 residues acting as a hinge to "open" or "close" the receptor-binding (R) domain, and (2) a possible receptor-docking site, a beta-hairpin loop protruding from the R domain containing residues that bind the cell-surface DT receptor. Based on the monomeric and dimeric DT crystal structures we have determined and the solution studies of others, we present a 5-step structure-based mechanism of intoxication: (1) proteolysis of a disulfide-linked surface loop (residues 186-201) between the catalytic (C) and transmembrane (T) domains; (2) binding of a beta-hairpin loop protruding from the R domain to the DT receptor, leading to receptor-mediated endocytosis; (3) low pH-triggered open monomer formation and exposure of apolar surfaces in the T domain, which insert into the endosomal membrane; (4) translocation of the C domain into the cytosol; and (5) catalysis by the C domain of ADP-ribosylation of elongation factor 2.     

Refined crystal structure of carboxypeptidase A at 1.54 A resolution

The crystal structure of bovine carboxypeptidase A (Cox) has been refined at 1.54 A resolution using the restrained least-squares algorithm of Hendrickson & Konnert (1981). The crystallographic R factor (formula; see text) for structure factors calculated from the final model is 0.190. Bond lengths and bond angles in the carboxypeptidase A model have root-mean-square deviations from ideal values of 0.025 A and 3.6 degrees, respectively. Four examples of a reverse turn like structure (the "Asx" turn) requiring an aspartic acid or asparagine residue are observed in this structure. The Asx turn has the same number of atoms as a reverse turn, but only one peptide bond, and the hydrogen bond that closes the turn is between the Asx side-chain CO group and a main-chain NH group. The distributions of CO-N and NH-O hydrogen bond angles in the alpha-helices and beta-sheet structures of carboxypeptidase A are centered about 156 degrees. A total of 192 water molecules per molecule of enzyme are included in the final model. Unlike the hydrogen bonding geometry observed in the secondary structure of the enzyme, the CO-O(wat) hydrogen bond angle is distributed about 131 degrees, indicating the role of the lone pair electrons of the carbonyl oxygen in the hydrogen bond interaction. Twenty four solvent molecules are observed buried within the protein. Several of these waters are organized into hydrogen-bonded chains containing up to five waters. The average temperature factor for atoms in carboxypeptidase A is 8 A2, and varies from 5 A2 in the center of the protein, to over 30 A2 at the surface.     

Three-dimensional structures of aspartate aminotransferase from Escherichia coli and its mutant enzyme at 2.5 A resolution

The structure of Escherichia coli aspartate aminotransferase complex with the inhibitor 2-methylaspartate, and that of the mutant enzyme in which an arginine was substituted for a lysine residue thereby forming a Schiff base with the coenzyme pyridoxal 5'-phosphate, were determined at 2.5 A resolution, by the molecular replacement method using the known structure of pig cytosolic aspartate aminotransferase. The enzyme catalyzes the reversible transamination between L-aspartate and alpha-ketoglutarate, and forms a dimeric structure of two identical subunits. Each subunit comprises two domains, a small and a large one. Although, in general, the overall and secondary structure of E. coli enzyme are similar to those of higher animals, some differences of enzymatic action between the enzyme from E. coli and those from higher animals could be explained on the basis of the X-ray structures and molecular mechanics calculation based on them.     

The three-dimensional structure of HLA-B27 at 2.1 A resolution suggests a general mechanism for tight peptide binding to MHC.

Cell surface complexes of class I MHC molecules and bound peptide antigens serve as specific recognition elements controlling the cytotoxic immune response. The 2.1 A structure of the human class I MHC molecule HLA-B27 provides a detailed composite image of a co-crystallized collection of HLA-B27-bound peptides, indicating that they share a common main-chain structure and length. It also permits direct visualization of the conservation of arginine as an "anchor" side chain at the second peptide position, which is bound in a potentially HLA-B27-specific pocket and may therefore have a role in the association of HLA-B27 with several diseases. Tight peptide binding to class I MHC molecules appears to result from the extensive contacts found at the ends of the cleft between peptide main-chain atoms and conserved MHC side chains, which also involve the peptide in stabilizing the three-dimensional fold of HLA-B27. The concentration of binding interactions at the peptide termini permits extensive sequence (and probably some length) variability in the center of the peptide, where it is exposed for T cell recognition.     

Refined structure of glutathione reductase at 1.54 A resolution

The crystal structure of human glutathione reductase has been established at 1.54 A resolution using a restrained least-squares refinement method. Based on 77,690 independent reflections of better than 10 A resolution, a final R-factor of 18.6% was obtained with a model obeying standard geometry within 0.025 A in bond lengths and 2.4 degrees in bond angles. The final 2Fo-Fc electron density map allows for the distinction of carbon, nitrogen and oxygen atoms with temperature factors below about 25 A2. Apart from 461 amino acid residues and the prosthetic group FAD, the model contains 524 solvent molecules, about 118 of which can be considered an integral part of the enzyme. The largest solvent cluster is at the dimer interface and contains 104 interconnected solvent molecules, part of which are organized in a warped sheet-like structure. The main-chain dihedral angles are well-concentrated in the allowed regions of the Ramachandran plot. The spread of dihedral angles in beta-pleated sheets is much larger than in alpha-helices and especially in alpha-helix cores, indicating the higher plasticity of beta-structures. The analysis revealed a large amount of 3(10)-helix. The side-chain conformations cluster at the staggered positions, and show well-defined preferences. Also, a mobility gradient is observed for side-chains. Non-polar and polar side-chains show average temperature factor increases per bond of 10% and 25%, respectively. A number of alternative conformations of internal side-chains, in particular serines and methionines, have been detected. The extended FAD molecule also shows a mobility gradient between the very rigid flavin (mean value of B) = 8.7 A2) and the more mobile adenine (mean value of B = 16.2 A2). The entire active center is particularly well ordered, with temperature factors around 10 A2. The dimer interface consists of a rigid contact area, which is well conserved in the Escherichia coli enzyme, and a flexible area that is not. Altogether, the buried surfaces at the crystal contacts are half as large as at the dimer interface, but less specific. The refined structure shows clearly that there are no buried cations compensating the charge of the pyrophosphate moiety of FAD. The flavin deviates slightly from standard geometry, which is possibly caused by the polypeptide environment. In contrast to an earlier interpretation, atom N5 of the flavin can accommodate a proton, and it is conceivable that this proton proceeds to the redox-active disulfide.(ABSTRACT TRUNCATED AT 400 WORDS)     

Refined structure of porcine pepsinogen at 1.8 A resolution

The molecular structure of porcine pepsinogen at 1.8 A resolution has been determined by a combination of molecular replacement and multiple isomorphous phasing techniques. The resulting structure was refined by restrained-parameter least-squares methods. The final R factor [formula: see text] is 0.164 for 32,264 reflections with I greater than or equal to sigma (I) in the resolution range of 8.0 to 1.8 A. The model consists of 2785 protein atoms in 370 residues, a phosphoryl group on Ser68 and 238 ordered water molecules. The resulting molecular stereochemistry is consistent with a well-refined crystal structure with co-ordinate accuracy in the range of 0.10 to 0.15 A for the well-ordered regions of the molecule (B less than 15 A2). For the enzyme portion of the zymogen, the root-mean-square difference in C alpha atom co-ordinates with the refined porcine pepsin structure is 0.90 A (284 common atoms) and with the C alpha atoms of penicillopepsin it is 1.63 A (275 common atoms). The additional 44 N-terminal amino acids of the prosegment (Leu1p to Leu44p, using the letter p after the residue number to distinguish the residues of the prosegment) adopt a relatively compact structure consisting of a long beta-strand followed by two approximately orthogonal alpha-helices and a short 3(10)-helix. Intimate contacts, both electrostatic and hydrophobic interactions, are made with residues in the pepsin active site. The N-terminal beta-strand, Leu1p to Leu6p, forms part of the six-stranded beta-sheet common to the aspartic proteinases. In the zymogen the first 13 residues of pepsin, Ile1 to Glu13, adopt a completely different conformation from that of the mature enzyme. The C alpha atom of Ile1 must move approximately 44 A in going from its position in the inactive zymogen to its observed position in active pepsin. Electrostatic interactions of Lys36pN and hydrogen-bonding interactions of Tyr37pOH, and Tyr90H with the two catalytic aspartate groups, Asp32 and Asp215, prevent substrate access to the active site of the zymogen. We have made a detailed comparison of the mammalian pepsinogen fold with the fungal aspartic proteinase fold of penicillopepsin, used for the molecular replacement solution. A structurally derived alignment of the two sequences is presented.     

Structure of ricin B-chain at 2.5 A resolution

The heterodimeric plant toxin ricin has been refined to 2.5 A resolution. The B-chain lectin (RTB) is described in detail. The protein has two major domains, each of which has a galactose binding site. RTB has no regular secondary structure but displays several omega loops. Each RTB domain is made of three copies of a primitive 40 residue folding unit, which pack around a pseudo threefold axis. In each domain, galactose binds in a shallow cleft formed by a three residue peptide kink on the bottom and an aromatic ring on the top. At the back of the cleft, an aspartate forms hydrogen bonds to the C3 and C4 hydroxyls of galactose, whereas a glutamine bonds to the C4 alcohol, helping to define specific epimer binding. In addition to analyzing the sugar binding mechanism, the assembly of subdomain units around the pseudo threefold axis of each domain is described. The subdomains contribute conserved Trp, Leu, and Ile residues to a compact central hydrophobic core. This tight threefold binding probably drives the peptide folding and stabilizes the protein structure.     

Crystal structure of human serum albumin at 2.5 A resolution.

A new triclinic crystal form of human serum albumin (HSA), derived either from pool plasma (pHSA) or from a Pichia pastoris expression system (rHSA), was obtained from polyethylene glycol 4000 solution. Three-dimensional structures of pHSA and rHSA were determined at 2.5 A resolution from the new triclinic crystal form by molecular replacement, using atomic coordinates derived from a multiple isomorphous replacement work with a known tetragonal crystal form. The structures of pHSA and rHSA are virtually identical, with an r.m. s. deviation of 0.24 A for all Calpha atoms. The two HSA molecules involved in the asymmetric unit are related by a strict local twofold symmetry such that the Calpha atoms of the two molecules can be superimposed with an r.m.s. deviation of 0.28 A in pHSA. Cys34 is the only cysteine with a free sulfhydryl group which does not participate in a disulfide linkage with any external ligand. Domains II and III both have a pocket formed mostly of hydrophobic and positively charged residues and in which a very wide range of compounds may be accommodated. Three tentative binding sites for long-chain fatty acids, each with different surroundings, are located at the surface of each domain.     

Crystal structure of human annexin I at 2.5 A resolution.

cDNA coding for N-terminally truncated human annexin I, a member of the family of Ca(2+)-dependent phospholipid binding proteins, has been cloned and expressed in Escherichia coli. The expressed protein is biologically active, and has been purified and crystallized in space group P2(1)2(1)2(1) with cell dimensions a = 139.36 A, b = 67.50 A, and c = 42.11 A. The crystal structure has been determined by molecular replacement at 3.0 A resolution using the annexin V core structure as the search model. The average backbone deviation between these two structures is 2.34 A. The structure has been refined to an R-factor of 17.7% at 2.5 A resolution. Six calcium sites have been identified in the annexin I structure. Each is located in the loop region of the helix-loop-helix motif. Two of the six calcium sites in annexin I are not occupied in the annexin V structure. The superpositions of the corresponding loop regions in the four domains show that the calcium binding loops in annexin I can be divided into two classes: type II and type III. Both classes are different from the well-known EF-hand motif (type I).