Revealing the structural and functional diversity of plant cell walls

The extensive knowledge of the chemistry of isolated cell wall polymers, and that relating to the identification and partial annotation of gene families involved in their synthesis and modification, is not yet matched by a sophisticated understanding of the occurrence of the polymers within cell walls of the diverse cell types within a growing organ. Currently, the main sets of tools that are used to determine cell-type-specific configurations of cell wall polymers and aspects of cell wall microstructures are antibodies, carbohydrate-binding modules (CBMs) and microspectroscopies. As these tools are applied we see that cell wall polymers are extensively developmentally regulated and that there is a range of structurally distinct primary and secondary cell walls within organs and across species. The challenge now is to document cell wall structures in relation to diverse cell biological events and to integrate this knowledge with the emerging understanding of polymer functions.     

The role of Rab GTPases in cell wall metabolism

The synthesis and modification of the cell wall must involve the production of new cell wall polymers and enzymes. Their targeted secretion to the apoplast is one of many potential control points. Since Rab GTPases have been strongly implicated in the regulation of vesicle trafficking, a review of their involvement in cell wall metabolism should throw light on this possibility. Cell wall polymer biosynthesis occurs mainly in the Golgi apparatus, except for cellulose and callose, which are made at the plasma membrane by an enzyme complex that cycles through the endomembrane system and which may be regulated by this cycling. Several systems, including the growth of root hairs and pollen tubes, cell wall softening in fruit, and the development of root nodules, are now being dissected. In these systems, secretion of wall polymers and modifying enzymes has been documented, and Rab GTPases are highly expressed. Reverse genetic experiments have been used to interfere with these GTPases and this is revealing their importance in regulation of trafficking to the wall. The role of the RabA (or Rab11) GTPases is particularly exciting in this respect.     

Mechanical modeling and structural analysis of the primary plant cell wall

Plant cell growth is a fundamental process during plant development whose spatial and temporal dynamics are controlled by the cell wall. Modeling mechanical aspects of cell growth therefore requires the integration of structural cell wall details with quantitative biophysical parameters. Recent advances in microscopic techniques and mechanical modeling have made significant contributions to the field of cell wall biomechanics. Live observation of cellulose microfibrils at high z-resolution now enables determining the dynamic orientation of these polymers in the different wall layers of growing cells. Mechanical modeling approaches have been developed to operate at the scale of individual molecules and will thus be able to exploit the availability of the high-resolution structural data. The combination of these techniques has the potential to make a significant and quantitative contribution to our understanding of plant growth and development.     

Relationship of the major constituents of the Neurospora crassa cell wall to wild-type and colonial morphology

Mahadevan, P. R. (The Rockefeller Institute, New York, N.Y.), and E. L. Tatum. Relationship of the major constituents of the Neurospora crassa cell wall to wild-type and colonial morphology. J. Bacteriol. 90:1073-1081. 1965.-The relationship of cell wall to morphology in Neurospora crassa was studied by correlating the levels of structural polymers of the cell wall with wild-type and colonial morphology. The cell wall of N. crassa contains at least four major complexes: a peptide-polysaccharide complex; two glucose polymers, one of which was found to be a laminarinlike beta-1,3-glucan; and, lastly, chitin. The levels of one or more of these structural polymers are consistently altered in single-gene mutants with colonial growth, and in sorbose-induced colonial growth. The proportions of these polymers, particularly of the peptide-polysaccharide complex and the beta-1,3-glucan, appear to be important to morphology.     

Genetic dissection of plant cell-wall biosynthesis

The plant cell wall is a complex structure consisting of a variety of polymers including cellulose, xyloglucan, xylan and polygalacturonan. Biochemical and genetic analysis has made it possible to clone genes encoding cellulose synthases (CesA). A comparison of the predicted protein sequences in the Arabidopsis genome indicates that 30 divergent genes with similarity to CesAs exist. It is possible that these cellulose synthase-like (Csl) proteins do not contribute to cellulose synthesis, but rather to the synthesis of other wall polymers. A major challenge is, therefore, to assign biological function to these genes. In an effort to address this issue we have systematically identified T-DNA or transposon insertions in 17 Arabidopsis Csls. Phenotypic characterization of "knock-out" mutants includes the determination of spectroscopic profile differences in mutant cell walls from wild-type plants by Fourier-transform IR microscopy. A more precise characterization includes cell wall fractionation followed by neutral sugar composition analysis by anionic exchange chromatography.     

Enzymatic processes involved in the incorporation of hydroxycinnamates into grass cell walls

Many plant species have one or more types of acylation of cell wall polymers. Grasses (Poaceae family) are unique with abundant acylation of specific cell wall polymers by hydroxycinnamates. The most common hydroxycinnamates found in a wide range of grasses are ferulates (trans-4-hydroxy-3-methoxycinnamate) and p-coumarates (trans-4-hydroxycinnamate). These two hydroxycinnamates are synthesized by the phenylpropanoid pathway. Though structurally related, they seem to have different functional roles within the cell wall. Ferulates have been shown to have a critical role in cross-linking cell wall components; forming links between structural polysaccharides and links between structural polysaccharides and lignin. They are incorporated into the cell wall by distinctly different mechanisms. Ferulic acid is incorporated into cell walls as ester linked substituents on arabinoxylans. The exact role p-coumarates play in plant cell walls is unknown, but it has been shown that p-coumaric acid is ester-linked to monolignols and shuttled out to the wall to become incorporated into newly forming lignin polymers. Both processes require the activity of specific hydroxycinnamoyl transferases utilizing CoA derivatives to drive the transferase reactions.     

Zelloberflächenstrukturen der Bacteria und Archaea

Cell wall types of Bacteria and Archaea The acaryote microorganisms are divided into the two domains Bacteria and Archaea. The third domain represent the Eukarya. There is no universal cell wall polymer found in all Bacteria and Archaea. Due to their morphology several cell wall types can be identified, but the chemical diversity of the individual polymers is considerably greater. Certain cell wall polymers are limited to one of the two domains of Bacteria or Archaea like the murein of the Bacteria or the pseudomurein of some methanogens. Peptidoglycans (murein, pseudomurein) do not occur in eukaryotes. On the other hand individual cell wall polymers possess similarities to polymers of other domains. The structural principle of the methanochondroitin is also implemented in the eukaryotic connective tissue. The cell wall polymers consist frequently of glycoconjugates in which the amino acid content (glycoproteins) or the glycan moiety (proteoglycan‐like polymers) predominate. Both components (carbohydrates, amino acids) can also occur in similar amounts (peptidoglycan). There exist also cell wall polymers, which consist only of glycans (slimes, methanochondroitin) or amino acids (proteins, poly‐γ‐D‐glutamyl polymers). Cell wall‐free species (Mycoplasma) also occur. The chemical composition of the cell surface polymers was one of the first phenotypic characteristics that supported the 16 sRNA concept of Carl Woese to assign acaryote organisms into the two domains Bacteria and Archaea. A common feature of all Archaea is the lack of muramic acid and an outer membrane. The later occurs in the gramnegative Bacteria. During the evolution of Bacteria and Archaea a great variety of chemically different cell wall polymers has been developed which allow the growth and interaction of Bacteria and Archaea in different habitats. In this paper, some important surface polymers of Bacteria and Archaea are presented according to their chemical composition.     

Adaptation and growth of tomato cells on the herbicide 2,6-dichlorobenzonitrile leads to production of unique cell walls virtually lacking a cellulose-xyloglucan network

Suspension-cultured cells of tomato (Lycopersicon esculentum VF 36) have been adapted to growth on high concentrations of 2,6-dichlorobenzonitrile, an herbicide which inhibits cellulose biosynthesis. The mechanism of adaptation appears to rest largely on the ability of these cells to divide and expand in the virtual absence of a cellulose-xyloglucan network. Walls of adapted cells growing on 2,6-dichlorobenzonitrile also differ from nonadapted cells by having reduced levels of hydroxyproline in protein, both in bound and salt-elutable form, and in having a much higher proportion of homogalacturonan and rhamnogalacturonan-like polymers. Most of these latter polymers are apparently cross-linked in the wall via phenolic-ester and/or phenolic ether linkages, and these polymers appear to represent the major load-bearing network in these unusual cell walls. The surprising finding that plant cells can survive in the virtual absence of a major load-bearing network in their primary cell walls indicates that plants possess remarkable flexibility for tolerating changes in wall composition.     

Cell wall autolytic activities and distribution of cell wall glucanases in Zea mays L. seedlings

Exo- and endo-glucanases mediate specific degradation of cell wall (1,3)(1,4)-beta-D-glucans and these enzymes have been related to auxin-mediated growth and development of cereal coleoptiles. However, their distribution and functions have not been well established in other tissues. In this study the glucanase activities and cell wall autolytic activities of different maize organs were determined. Autolysis assays serve to evaluate the hydrolysis of cell wall polymers in situ by measuring the sugars released from the insoluble cell wall matrix resulting from the action of bound enzymes. Autolytic activities were observed in the cell walls of elongating young leaves, mesocotyl and roots of maize. Wall proteins extracted from all of these structures are enriched in several types of glucanases and other wall polysaccharide hydrolases. These enzymes therefore appear to have a widespread and fundamental role in wall metabolism in growing tissues.     

Is acid-induced extension in seed plants only protein-mediated?

Cell wall extensibility controls the rate of plant cell growth. It is determined by intrinsic mechanical properties of wall polymers and by wall proteins modifying these polymers and their interactions. Heat-inactivation of endogenous cell wall proteins inhibited acid-induced extension of onion epidermis peels transverse to the net cellulose alignment in the cell wall but not parallel to it. In the former case the acid-induced extension could be controlled by expansins and in the latter case by pectins restricting shear between microfibrils. Heat-inactivated cell walls stretched transversely to the net cellulose orientation extended faster at pH 5.7 and slower at pH 4.5 compared to native walls. Expansins seem to be inactive at pH 5.7, so that faster extension may result from heat-induced viscous flow of pectins and conformational changes in the cuticle of the epidermis. This stimulation of wall extension is not seen at pH 4.5 as it is outweighed by the inhibitory effect of expansin heat-inactivation. Thus, cell wall extension in higher plants might be controlled by a complex interplay between protein-dependent and protein-independent mechanisms, the result of which depends on pH and preferential orientation of main wall polymers.     

The structure of cell wall alpha-glucan from fission yeast

Morphology and structural integrity of fungal cells depend on cell wall polysaccharides. The chemical structure and biosynthesis of two types of these polysaccharides, chitin and (1-->3)-beta-glucan, have been studied extensively, whereas little is known about alpha-glucan. Here we describe the chemical structure of alpha-glucan isolated from wild-type and mutant cell walls of the fission yeast Schizosaccharomyces pombe. Wild-type alpha-glucan was found to consist of a single population of linear glucose polymers, approximately 260 residues in length. These glucose polymers were composed of two interconnected linear chains, each consisting of approximately 120 (1-->3)-linked alpha-d-glucose residues and some (1-->4)-linked alpha-D-glucose residues at the reducing end. By contrast, alpha-glucan of an alpha-glucan synthase mutant with an aberrant cell morphology and reduced alpha-glucan levels consisted of a single chain only. We propose that alpha-glucan biosynthesis involves an ordered series of events, whereby two alpha-glucan chains are coupled to create mature cell wall alpha-glucan. This mature form of cell wall alpha-glucan is essential for fission-yeast morphogenesis.     

Hydrolysis of diethyl diferulates by a tannase from Aspergillus oryzae

Diferulic acid forms cross-links in naturally occurring plant cell wall polymers such as arabinoxylans and pectins. We have used model ethyl esterified substrates to find enzymes able to break these cross-links. A tannase from Aspergillus oryzae exhibited esterase activity on several synthetic ethyl esterified diferulates. The efficiency of this esterase activity on most diferulates is low compared to that of a cinnamoyl esterase, FAEA, from Aspergillus niger. Of the diferulate substrates assayed, tannase was most efficient at hydrolysing the first ester bond of the 5–5- type of dimer. Importantly and unlike the cinnamoyl esterase, tannase from A. oryzae is able to hydrolyse both ester bonds from the 8–5-benzofuran dimer, thus forming the corresponding free acid product. These results suggest that tannases may contribute to plant cell wall degradation by cleaving some of the cross-links existing between cell wall polymers.     

Phase Separation of Plant Cell Wall Polysaccharides and Its Implications for Cell Wall Assembly

Concentrated binary mixtures of polymers in solution commonly exhibit immiscibility, resolving into two separate phases each of which is enriched in one polymer. The plant cell wall is a concentrated polymer assembly, and phase separation of the constituent polymers could make an important contribution to its structural organization and functional properties. However, to our knowledge, there have been no published reports of the phase behavior of cell wall polymers, and this phenomenon is not included in current cell wall models. We fractionated cell walls purified from the pericarp of unripe tomatoes (Lycopersicon esculentum) by extraction with cyclohexane diamine tetraacetic acid (CDTA), Na2CO3, and KOH and examined the behavior of concentrated mixtures. Several different combinations of fractions exhibited phase separation. Analysis of coexisting phases demonstrated the immiscibility of the esterified, relatively unbranched pectic polysaccharide extracted by CDTA and a highly branched, de-esterified pectic polysaccharide present in the 0.5 N KOH extract. Some evidence for phase separation of the CDTA extract and hemicellulosic polymers was also found. We believe that phase separation is likely to be a factor in the assembly of pectic polysaccharides in the cell wall and could, for example, provide the basis for explaining the formation of the middle lamella.     

Oligoglucuronide production in Mucor rouxii: evidence for a role for endohydrolases in hyphal extension.

Culture filtrates of Mucor rouxii contained oligomers of glucuronic acid which were labeled rapidly during pulses with D-[U-14C]glucose. These oligomers were probably derived by enzymatic lysis of acidic polymers in the cell wall. The kinetics of the incorporation of label into oligouronides and cell wall polymers suggested that lysis of the wall was required for active hyphal extension. Experiments with cycloheximide, which inhibited hyphal extension, suggested that wall lysis was also required for the subapical cell wall synthesis which probably occurred under these conditions.     

Cell wall teichoic acids: structural diversity, species specificity in the genus Nocardiopsis, and chemotaxonomic perspective

Data on the structures of cell wall teichoic acids, the anionic carbohydrate-containing polymers, found in many Gram-positive bacteria have been summarized and the polymers of the actinomycete genus Nocardiopsis have been considered from the taxonomic standpoint. The structures of these polymers or their combinations have been demonstrated to be indicative of each of seven Nocardiopsis species and two subspecies, verified by the DNA-DNA relatedness data, and to correlate well with the grouping of the organisms based on 16S rDNA sequences. As each of the intrageneric taxa discussed is definable by the composition of teichoic acids, the polymers are considered to be valuable taxonomic markers for the Nocardiopsis species and subspecies. The (13)C NMR spectra of the polymers, data on the products of their chemical degradation, and distinguishing constituents of whole cell walls derived from teichoic acids are discussed, which are useful for identification of certain polymers and members of the genus Nocardiopsis at the species and subspecies level in microbiological practice.     

Changes in Cell Wall Polysaccharides of Green Bean Pods during Development

The changes in cell wall polysaccharides and selected cell wall-modifying enzymes were studied during the development of green bean (Phaseolus vulgaris L.) pods. An overall increase of cell wall material on a dry-weight basis was observed during pod development. Major changes were detected in the pectic polymers. Young, exponentially growing cell walls contained large amounts of neutral, sugar-rich pectic polymers (rhamnogalacturonan), which were water insoluble and relatively tightly connected to the cell wall. During elongation, more galactose-rich pectic polymers were deposited into the cell wall. In addition, the level of branched rhamnogalacturonan remained constant, while the level of linear homogalacturonan steadily increased. During maturation of the pods, galactose-rich pectic polymers were degraded, while the accumulation of soluble homogalacturonan continued. During senescence there was an increase in the amount of ionically complexed pectins, mainly at the expense of freely soluble pectins. The most abundant of the enzymes tested for was pectin methylesterase. Peroxidase, beta-galactosidase, and alpha-arabinosidase were also detected in appreciable amounts. Polygalacturonase was detected only in very small amounts throughout development. The relationship between endogenous enzyme levels and the properties of cell wall polymers is discussed with respect to cell wall synthesis and degradation.     

Response of Paracoccidioides brasiliensis Pb01 to stressor agents and cell wall osmoregulators

In its attempt to survive, the fungal cell can change the cell wall composition and/or structure in response to environmental stress. The molecules involved in these compensatory mechanisms are a possible target for the development of effective antifungal agents. In the thermodimorphic fungus Paracoccidioides brasiliensis Pb01, the main polymers that compose the cell wall are chitin and glucans. These polymers form a primary barrier that is responsible for the structural integrity and formation of the cell wall. In this study the behaviour of P. brasiliensis was evaluated under incubation with cell wall stressor agents such as Calcofluor White (CFW), Congo Red (CR), Sodium Dodecyl Sulphate (SDS), NaCl, KCl, and Sorbitol. Use of concentrations at which the fungus is visually sensitive to those agents helped to explain some of the adaptive mechanisms used by P. brasiliensis in response to cell wall stress. Our results show that 1,3-β-D-glucan synthase (PbFKS1), glucosamine-6-phosphate synthase (PbGFA1) and β-1,3-glucanosyltransferase (PbGEL3)as well as 1,3-β-D-glucan and N-acetylglucosamine (GlcNAc) residues in the cell wall are involved in compensatory mechanisms against cell wall damage.     

Immunogold localization of xyloglucan and rhamnogalacturonan I in the cell walls of suspension-cultured sycamore cells

Plant cell walls serve several functions: they impart rigidity to the plant, provide a physical and chemical barrier between the cell and its environment, and regulate the size and shape of each cell. Chemical studies have provided information on the biochemical composition of the plant cell walls as well as detailed knowledge of individual cell wall molecules. In contrast, very little is known about the distribution of specific cell wall components around individual cells and throughout tissues. To address this problem, we have produced polyclonal antibodies against two cell wall matrix components; rhamnogalacturonan I (RG-I), a pectic polysaccharide, and xyloglucan (XG), a hemicellulose. By using the antibiodies as specific markers we have been able to localize these polymers on thin sections of suspension-cultured sycamore cells (Acer pseudoplatanus). Our results reveal that each molecule has a unique distribution. XG is localized throughout the entire wall and middle lamella. RG-I is restricted to the middle lamella and is especially evident in the junctions between cells. These observations indicate that plant cell walls may have more distinct chemical (and functional?) domains than previously envisaged.     

Biomechanics of plant growth

Growth of turgid cells, defined as an irreversible increase in cell volume and surface area, can be regarded as a physical process governed by the mechanical properties of the cell wall and the osmotic properties of the protoplast. Irreversible cell expansion is produced by creating a driving force for water uptake by decreasing the turgor through stress relaxation in the cell wall. This mechano-hydraulic process thus depends on and can be controlled by the mechanical properties of the wall, which in turn are subject to modification by wall loosening and wall stiffening reactions. The biochemical mechanisms of these changes in mechanical wall properties and their regulation by internal signals (e.g., hormones) or external signals (e.g., light, drought stress) are at present incompletely understood and subject to intensive research. These signals act on walls that have the properties of composite materials in which the molecular structure and spatial organization of polymers rather than the distribution of mechanical stresses dictate the allometry of cell and organ growth and thus cell and organ shape. The significance of cell wall architecture for allometric growth can be demonstrated by disturbing the oriented deposition of wall polymers with microtubule-interfering drugs such as colchicine. Elongating organs (e.g., cylindrical stems or coleoptiles) composed of different tissues with different mechanical properties exhibit longitudinal tissue tensions resulting in the transfer of wall stress from inner to peripheral cell layers that adopt control over organ growth. For physically analyzing the growth process leading to seed germination, the same mechanical and hydraulic parameters as in normal growth are principally appropriate. However, for covering the influences of the tissues that restrain embryo expansion (seed coat, endosperm), an additional force and a water permeability term must be considered.