The structure of the human apolipoprotein C-II gene. Electron microscopic analysis of RNA:DNA hybrids, complete nucleotide sequence, and identification of 5' homologous sequences among apolipoprotein genes

Cloned human apo-C-II cDNA was used as a hybridization probe to identify the human apo-C-II gene in a genomic library constructed in our laboratory. The isolated apo-C-II DNA was studied both by electron microscopy and by direct sequence analysis. Ultrastructural morphological analysis of RNA-DNA hybrids revealed that the apo-C-II gene had complex structures because of regions of inverted complementary sequences in and around the gene forming stem-and-loop structures which interfere with the formation of stable RNA:DNA hybrids. Extensive morphological analysis revealed a minimum of 3 intervening sequences (IVS), and their lengths were measured. Direct sequence analysis of the cloned gene confirmed the presence of 3 IVS. There are 4 Alu type sequences in IVS-I. We sequenced 4340 nucleotides which include 545 nucleotides in the 5' flanking region, the entire gene which spans 3320 nucleotides, and 475 nucleotides in the 3' flanking region which also encompasses an additional Alu sequence. The 5' end of the gene was identified by primer extension and sequencing of the primer extended cDNA. Apo-C-II mRNA structure was deduced from the cDNA sequence, the primer extension experiments, and the genomic sequence. It is 494 nucleotides in length. Its sequence differs from previously published sequences in that there are 7 additional nucleotides before the polyadenylate tail. In the 5' flanking region, nucleotides -234 to -213 encompass a GC-rich region which exhibits high homology (greater than 70%) to the 5' flanking regions of the genes of all the apolipoproteins published to date, namely, apo-A-II (-497 to -471), apo-A-I (approximately -196 to -179), apo-E (-409 to -391), and apo-C-III (approximately -116 to -103). This highly conserved region might represent some evolutionarily conserved sequences from these related genes and/or might represent a region with regulatory function.     

Coding and 3' non-coding nucleotide sequence of chalcone synthase mRNA and assignment of amino acid sequence of the enzyme

The nucleotide sequence of an almost complete cDNA copy of chalcone synthase mRNA from cultured parsley cells (Petroselinum hortense) has been determined. The cDNA copy comprised the complete coding sequence for chalcone synthase, a short A-rich stretch of the 5' non-coding region and the complete 3' non-coding region including a poly(A) tail. The amino acid sequence deduced from the nucleotide sequence of the cDNA is consistent with a partial N-terminal sequence analysis, the total amino acid composition, the cyanogen bromide cleavage pattern, and the apparent mol. wt. of the subunit of the purified enzyme.     

3' end cDNA amplification using classic RACE

Having knowledge of the entire 3' sequence of a cDNA is often important because the non-coding terminal region can contain signals that regulate the stability or subcellular localization of the mRNA. Also, some messages use alternative genomic sites for cleavage and polyadenylation that can alter the above properties, or change the encoded protein. Full-length cDNAs can be obtained from complex mixtures of cellular mRNA using rapid amplification of cDNA ends (RACE) PCR as long as part of the mRNA sequence is known; adding non-specific tags to the ends of the cDNA allows the regions between the known parts of the sequence and the ends to be amplified. In 3' RACE, the poly(A) tail functions as a non-specific tag at the 3' end of the mRNA. cDNA ends can be obtained in 1-3 days using this protocol.     

The sequence of 967 amino acids at the carboxyl-end of rat thyroglobulin. Location and surroundings of two thyroxine-forming sites

The entire rat thyroglobulin mRNA sequence (about 8500 nucleotides) has been cloned in five recombinant plasmids containing overlapping cDNA inserts. The 3' end of the mRNA is precisely defined by the poly (A) tail found in the furthest 3' end clone. Evidence that most of the 5' end is cloned come from size considerations and from a primer extension experiment. At the 3' end of the mRNA only one long open reading frame is present in the sequence of 3018 nucleotides that has been established. In the deduced protein sequence we have localized two thyroxine-forming sites in a region containing a high concentration of tyrosine residues.     

Degradation of apolipoprotein II mRNA occurs via endonucleolytic cleavage at 5'-AAU-3'/5'-UAA-3' elements in single-stranded loop domains of the 3'-noncoding region

Degradation intermediates of the estrogen-regulated apolipoprotein (apo) II mRNA were identified by S1 nuclease mapping and primer extension analysis. S1 mapping of poly(A)-RNA detected a series of mRNAs truncated at specific sites in the 3'-noncoding region. Many of these sites were also detected by primer extension analysis indicating that truncated molecules resulted from endonucleolytic cleavage in the 3'-noncoding region. Identical cleavage sites were seen with RNA from estrogen-treated animals or from animals withdrawn from hormone under conditions where apoII mRNA degraded in the slow (t1/2 = 13 h) or rapid (t1/2 = 1.5 h) decay mode. No differences were seen in poly(A) tail length or heterogeneity among these conditions. These results indicate that the estrogen-induced alteration in apoII mRNA turnover does not involve a new pathway of degradation, but, more likely, involves an increased targeting of the mRNA for degradation by a preexisting pathway. These data are consistent with a mechanism in which the initial step in apoII mRNA degradation is an endonucleolytic cleavage in the 3'-noncoding region without prior removal of the poly(A) tail. The endonucleolytic cleavage sites occurred predominantly at 5'-AAU-3' or 5'-UAA-3' trinucleotides found in single-stranded domains in a secondary structure model of the naked mRNA (Hwang, S-P. L., Eisenberg, M., Binder, R., Shelness, G. S., and Williams, D. L. (1989) J. Biol. Chem. 264, 8410-8418). The structure of the 3'-noncoding region in polyribosomal messenger ribonucleoprotein was examined by titrations of liver homogenates with dimethyl sulfate and cobra venom RNase. The results suggest that the typical cleavage site is a 5'-AAU-3' or 5'-UAA-3' trinucleotide in an accessible single-stranded loop domain. Single-stranded domains alone or accessible domains alone are not sufficient for cleavage. Similarly, 5'-AAU-3' or 5'-UAA-3' trinucleotides alone are not sufficient for cleavage. Localization of these trinucleotides to accessible single-stranded domains in the polyribosomal messenger ribonucleoprotein may provide the specificity for cleavage during targeted degradation.     

Cloning of the C alpha catalytic subunit of the bovine cAMP-dependent protein kinase.

The bovine C alpha type catalytic subunit of the cAMP-dependent protein kinase was cloned. A partial cDNA was isolated from a bovine heart cDNA library. This clone contained 120 bp of the coding sequence and the entire 3' untranslated region of 1431 bp. The complete coding region was cloned by PCR amplification from total bovine heart and skeletal muscle RNA. The sequence of the 3' oligonucleotide was taken from the partial cDNA clone whereas the 5' oligonucleotide was chosen by comparison of sequences of published C alpha subunits from other species. In the deduced amino acid sequence there is one deviation from the published bovine C alpha protein sequence, aspartic acid 286 is exchanged by an asparagine. The C alpha mRNA was found to be expressed differentially in various bovine tissues.     

基于模板切换的mRNA5'末端全长扩增方法

本文介绍一种称为CapFinder的技术,可用于克隆基因mRNA序列的5'末端非翻译区全长。该技术是利用某些反转录酶在反转录达到mRNA的5'末端帽结构时表现出很高的加尾活性(主要添加dC)这一特点,在反转录体系中加入一种带GGG的寡核苷酸序列,当反转录反应到达mRNA模板的5'末端帽结构时,切换到以该寡核酸为模板继续进行反转录反应,即可合成完整的cDNA一链,且在其3'末端还带有一段额外的寡核苷酸序列。用GGG寡核苷酸序列为上游引物和基因特异性的下游引物进行PCR即可扩增得到mRNA5'末端非翻译区的全长。利用该技术克隆了棉铃虫幼虫中肠Bt毒素受体E-钙粘素基因的5'末端非翻译区序列。     

Random priming PCR strategy to amplify and clone trace amounts of DNA

Here we report a new methodology to study trace amounts of DNA of unknown sequence using a two-step PCR strategy to amplify and clone target DNA. The first PCR is carried out with a partial random primer comprised of a specific 21-nucleotide 5' sequence, a random heptamer, and a 3' TGGC clamp. The second PCR is carried out with a single 19-nucleotide primer that matches the specific 5' sequence of the partial random primer. Using human and Mycoplasma genitalium DNA as examples, we demonstrated the efficiency of this approach by effectively cloning target DNA fragments from 1 pg DNA sample. The cloning sensitivity could reach 100 fg target DNA templates. Compared to the strategy of first adding adapter sequences to facilitate the PCR amplification of unknown sequences, this approach has the advantage of allowing for the amplification of DNA samples in both natural and denatured forms, which provides greater flexibility in sample preparation. This is an efficient strategy to retrieve sequences from trace DNA samples from various sources.     

A universal primer mixture for sequence determination at the 3' ends of cDNAs

We have devised a universal primer which can be used to sequence the 3'-ends of cloned cDNAs containing a polyA tail. The primer consists of an equimolar mixture of three primers: 20 T nucleotides followed by either an A, C, or G nucleotide (5'----3'). With this primer mixture and the dideoxynucleotide chain termination method, we determined the 3'-terminal sequence of human beta-actin cDNA in an Okayama-Berg vector, in four parallel sets of reactions containing either a single primer (T20G, T20C, or T20A) or an equimolar mixture of all three primers. Priming with both T20A and the triple mixture gave clearly readable results that agree with the known sequence of the human beta-actin gene, and we have applied this method successfully to several other cDNAs in the Okayama-Berg expression vector. Use of this universal primer mixture facilitates determination of sequences at the 3'-ends of cDNAs while by-passing the polyA tail region.     

Isolation and nucleotide sequence of a full-length cDNA coding for aldolase B from human liver.

Two recombinant clones, pA2 and pA3, containing cDNA sequences for human aldolase B have been isolated from a full length human liver cDNA library. The larger one, pA3, has been subcloned in M13 phage and completely sequenced with the chain terminator method. The sequence covers 1,600 nucleotides including the whole coding region (1,050 nucleotides), 67 nucleotides from the 5' non-coding region and the whole 3' non-coding region, 440 nucleotides long, down to the poly-A tail. Comparison with rabbit aldolase A and with a partial sequence of rat aldolase B, shows a homology of about 76% for aldolase A and of about 94% for aldolase B, which indicates that the sequenced cDNA codes for the liver isoenzyme. This is the first complete sequence reported for human aldolase B. The pA3 clone strongly hybridizes to 18S mRNA from human adult liver as expected from the size of the isolated cDNA.     

稻瘟病菌(Magnaporthe grisea)诱导的水稻早期反应基因ER1的5' 端cDNA片段克隆及序列分析

研究高等生物基因表达与调控的一个重要方面是分离基因的编码区及其上游的调控序列（ＤｅＶｅｅｒ等１９９７）,这需要获得一个基因的ｃＤＮＡ全长及从植物基因组获取全基因。在前文（周建明等１９９９）中曾经分离了稻瘟病菌侵染诱导的水稻早期反应基因ＥＲ１的ｃＤＮＡ片段,但是运用ｍＲＮＡ差异显示技术分离的ｃＤＮＡ片段往往只有近ｍＲＮＡ３’端的一部分,难以反映基因的结构及功能特点,因此,必须进一步分离其５’端的部分才有可能比较全面地了解此基因的特点。ＲＡＣＥ（ｒａｐｉｄａｍｐｌｉｆｉｃａｔｉｏｎｏｆｃＤＮＡｅｎ…     

Construction of chimeric plasmids containing histone H5 cDNA from hen erythrocyte. DNA sequence of a fragment derived from the 5' region of H5 mRNA.

We report that construction and characterization of chicken erythrocyte histone H5 cDNA recombinant plasmids. cDNA was synthesized from poly(A)+ polysomal RNA enriched in H5 mRNA and inserted into the PstI site of pBR322. Several clones containing H5 cDNA sequences were obtained and one of them (p541), expressing H5 antigenic determinants, was sequenced. The DNA insert of p541 contains 118 nucleotides from the 5' non-translated region of H5 mRNA and sequences coding for up to residue 46 of the N-terminus of the arginine (position 15) H5 variant. There is a strikingly high number of repeated sequences both in the leader and coding region; among these, the octanucleotide 5' GCG GCG GC 3' is found five times along the sequence. Although the H5 mRNA 5' leader is GC-rich (66%), there is an AT-rich region, about 16 nucleotides long, which shares strong homology with the leaders of sea urchin histone H1 mRNAs.     

Complete nucleotide sequence of ovine alpha-lactalbumin mRNA

The nucleotide sequence of ovine alpha-lactalbumin mRNA has been determined by chemical sequencing of two cDNA recombinant plasmids and a primer extension product. Ovine alpha-lactalbumin mRNA contains 723 nucleotides (excluding the poly(A) tail), with a 5' non-coding region of 26 nucleotides, followed by the 426 nucleotides of the coding region which determines a sequence signal of 19 amino acid residues and the 123 amino acid residues of mature alpha-lactalbumin. The coding region is followed by a 3' untranslated sequence of 271 nucleotides. The derived amino acid sequence of ovine pre-alpha-lactalbumin differs from that of its bovine counterpart by 8 amino acid substitutions, all but one originating from single mutations. Comparison of sequences of guinea pig, rat and human alpha-lactalbumin mRNAs with their ovine and bovine counterparts has revealed that these molecules have rapidly evolved. The highest degree of conservation was observed in the region coding for the mature protein and corresponds essentially to sequences which interact with UDP-galactosyltransferase and Ca2+ ions.