Higher harmonic generation microscopy for developmental biology

Optical higher harmonic generation, including second harmonic generation and third harmonic generation, leaves no energy deposition to its interacted matters due to an energy-conservation characteristic, providing the "noninvasiveness" nature desirable for biological studies. Combined with its nonlinearity, higher harmonic generation microscopy provides excellent three-dimensional (3D) sectioning capability, offering new insights into the studies of embryonic morphological changes and complex developmental processes. By choosing a laser working in the biological penetration window, here we present a noninvasive in vivo light microscopy with sub-micron 3D resolution and millimeter penetration, utilizing endogenous higher harmonic generation signals in live specimens. Noninvasive imaging was performed in live zebrafish (Danio rerio) embryos. The complex developmental processes within > 1-mm-thick zebrafish embryos can be observed in vivo without any treatment. No optical damage was found even with high illumination after long-term observations and the examined embryos all developed normally at least to the larval stage. The excellent 3D resolution of the demonstrated technology allows us to capture the subtle developmental information on the cellular or sub-cellular levels occurring deep inside the live embryos and larvae. This technique can not only provide in vivo observation of the cytoarchitecture dynamics during embryogenesis with submicron resolution and millimeter penetration depth, but would also make strong impact in developmental and structural biology studies.     

Magnetic resonance imaging: present and future applications

Magnetic resonance (MR) imaging has created considerable excitement in the medical community, largely because of its great potential to diagnose and characterize many different disease processes. However, it is becoming increasingly evident that, because MR imaging is similar to computed tomography (CT) scanning in identifying structural disorders and because it is more costly and difficult to use, this highly useful technique must be judged against CT before it can become an accepted investigative tool. At present MR imaging has demonstrated diagnostic superiority over CT in a limited number of important, mostly neurologic, disorders and is complementary to CT in the diagnosis of certain other disorders. For most of the remaining organ systems its usefulness is not clear, but the lack of ionizing radiation and MR''s ability to produce images in any tomographic plane may eventually prove to be advantageous. The potential of MR imaging to display in-vivo spectra, multinuclear images and blood-flow data makes it an exciting investigative technique. At present, however, MR imaging units should be installed only in medical centres equipped with the clinical and basic research facilities that are essential to evaluate the ultimate role of this technique in the care of patients.     

Analytic 3D Imaging of Mammalian Nucleus at Nanoscale Using Coherent X-Rays and Optical Fluorescence Microscopy

Despite the notable progress that has been made with nano-bio imaging probes, quantitative nanoscale imaging of multistructured specimens such as mammalian cells remains challenging due to their inherent structural complexity. Here, we successfully performed three-dimensional (3D) imaging of mammalian nuclei by combining coherent x-ray diffraction microscopy, explicitly visualizing nuclear substructures at several tens of nanometer resolution, and optical fluorescence microscopy, cross confirming the substructures with immunostaining. This demonstrates the successful application of coherent x-rays to obtain the 3D ultrastructure of mammalian nuclei and establishes a solid route to nanoscale imaging of complex specimens.     

Analytic 3D Imaging of Mammalian Nucleus at Nanoscale Using Coherent X-Rays and Optical Fluorescence Microscopy

Despite the notable progress that has been made with nano-bio imaging probes, quantitative nanoscale imaging of multistructured specimens such as mammalian cells remains challenging due to their inherent structural complexity. Here, we successfully performed three-dimensional (3D) imaging of mammalian nuclei by combining coherent x-ray diffraction microscopy, explicitly visualizing nuclear substructures at several tens of nanometer resolution, and optical fluorescence microscopy, cross confirming the substructures with immunostaining. This demonstrates the successful application of coherent x-rays to obtain the 3D ultrastructure of mammalian nuclei and establishes a solid route to nanoscale imaging of complex specimens.     

Phenotyping structural abnormalities in mouse embryos using high-resolution episcopic microscopy

The arrival of simple and reliable methods for 3D imaging of mouse embryos has opened the possibility of analysing normal and abnormal development in a far more systematic and comprehensive manner than has hitherto been possible. This will not only help to extend our understanding of normal tissue and organ development but, by applying the same approach to embryos from genetically modified mouse lines, such imaging studies could also transform our knowledge of gene function in embryogenesis and the aetiology of developmental disorders. The International Mouse Phenotyping Consortium is coordinating efforts to phenotype single gene knockouts covering the entire mouse genome, including characterising developmental defects for those knockout lines that prove to be embryonic lethal. Here, we present a pilot study of 34 such lines, utilising high-resolution episcopic microscopy (HREM) for comprehensive 2D and 3D imaging of homozygous null embryos and their wild-type littermates. We present a simple phenotyping protocol that has been developed to take advantage of the high-resolution images obtained by HREM and that can be used to score tissue and organ abnormalities in a reliable manner. Using this approach with embryos at embryonic day 14.5, we show the wide range of structural abnormalities that are likely to be detected in such studies and the variability in phenotypes between sibling homozygous null embryos.KEY WORDS: Phenotype screen, HREM, Imaging, 3D, Episcopic     

Fast, three-dimensional super-resolution imaging of live cells

We report super-resolution fluorescence imaging of live cells with high spatiotemporal resolution using stochastic optical reconstruction microscopy (STORM). By labeling proteins either directly or via SNAP tags with photoswitchable dyes, we obtained two-dimensional (2D) and 3D super-resolution images of living cells, using clathrin-coated pits and the transferrin cargo as model systems. Bright, fast-switching probes enabled us to achieve 2D imaging at spatial resolutions of ～25 nm and temporal resolutions as fast as 0.5 s. We also demonstrated live-cell 3D super-resolution imaging. We obtained 3D spatial resolution of ～30 nm in the lateral direction and ～50 nm in the axial direction at time resolutions as fast as 1-2 s with several independent snapshots. Using photoswitchable dyes with distinct emission wavelengths, we also demonstrated two-color 3D super-resolution imaging in live cells. These imaging capabilities open a new window for characterizing cellular structures in living cells at the ultrastructural level.     

Combined method of whole mount and block-face imaging: Acquisition of 3D data of gene expression pattern from conventional in situ hybridization

Visualization of spatiotemporal expression of a gene of interest is a fundamental technique for analyzing the involvements of genes in organ development. In situ hybridization (ISH) is one of the most popular methods for visualizing gene expression. When conventional ISH is performed on sections or whole-mount specimens, the gene expression pattern is represented in 2-dimensional (2D) microscopic images or in the surface view of the specimen. To obtain 3-dimensional (3D) data of gene expression from conventional ISH, the “serial section method” has traditionally been employed. However, this method requires an extensive amount of time and labor because it requires researchers to collect a tremendous number of sections, label all sections by ISH, and image them before 3D reconstruction. Here, we proposed a rapid and low-cost 3D imaging method that can create 3D gene expression patterns from conventional ISH-labeled specimens. Our method consists of a combination of whole-mount ISH and Correlative Microscopy and Blockface imaging (CoMBI). The whole-mount ISH-labeled specimens were sliced using a microtome or cryostat, and all block-faces were imaged and used to reconstruct 3D images by CoMBI. The 3D data acquired using our method showed sufficient quality to analyze the morphology and gene expression patterns in the developing mouse heart. In addition, 2D microscopic images of the sections can be obtained when needed. Correlating 2D microscopic images and 3D data can help annotate gene expression patterns and understand the anatomy of developing organs. These results indicated that our method can be useful in the field of developmental biology.     

Automated reconstruction of three-dimensional neuronal morphology from laser scanning microscopy images

Experimental and theoretical studies demonstrate that both global dendritic branching topology and fine spine geometry are crucial determinants of neuronal function, its plasticity and pathology. Importantly, simulation studies indicate that the interaction between local and global morphologic properties is pivotal in determining dendritic information processing and the induction of synapse-specific plasticity. The ability to reconstruct and quantify dendritic processes at high resolution is therefore an essential prerequisite to understanding the structural determinants of neuronal function. Existing methods of digitizing 3D neuronal structure use interactive manual computer tracing from 2D microscopy images. This method is time-consuming, subjective and lacks precision. In particular, fine details of dendritic varicosities, continuous dendritic taper, and spine morphology cannot be captured by these systems. We describe a technique for automated reconstruction of 3D neuronal morphology from multiple stacks of tiled confocal and multiphoton laser scanning microscopy (CLSM and MPLSM) images. The system is capable of representing both global and local structural variations, including gross dendritic branching topology, dendritic varicosities, and fine spine morphology with sufficient resolution for accurate 3D morphometric analyses and realistic biophysical compartment modeling. Our system provides a much needed tool for automated digitization and reconstruction of 3D neuronal morphology that reliably captures detail on spatial scales spanning several orders of magnitude, that avoids the subjective errors that arise during manual tracing with existing digitization systems, and that runs on a standard desktop workstation.     

Volumetric computed tomography (VCT): a new technology for noninvasive, high-resolution monitoring of tumor angiogenesis

Volumetric computed tomography (VCT) is a technology in which area detectors are used for imaging large volumes of a subject with isotropic imaging resolution. We are experimenting with a prototype VCT scanner that uses flat-panel X-ray detectors and is designed for high-resolution three-dimensional (3D) imaging. Using this technique, we have demonstrated microangiography of xeno-transplanted skin squamous cell carcinomas in nude mice. VCT shows the vessel architecture of tumors and animals with greater detail and plasticity than has previously been achieved, and is superior to contrast-enhanced magnetic resonance (MR) angiography. VCT and MR images correlate well for larger tumor vessels, which are tracked from their origin on 3D reconstructions of VCT images. When compared with histology, small tumor vessels with a diameter as small as 50 microm were clearly visualized. Furthermore, imaging small vessel networks inside the tumor tissue improved discrimination of vital and necrotic regions. Thus, VCT substantially improves imaging of vascularization in tumors and offers a promising tool for preclinical studies of tumor angiogenesis and antiangiogenic therapies.     

Three-dimensional imaging by deconvolution microscopy

Deconvolution is a computational method used to reduce out-of-focus fluorescence in three-dimensional (3D) microscope images. It can be applied in principle to any type of microscope image but has most often been used to improve images from conventional fluorescence microscopes. Compared to other forms of 3D light microscopy, like confocal microscopy, the advantage of deconvolution microscopy is that it can be accomplished at very low light levels, thus enabling multiple focal-plane imaging of light-sensitive living specimens over long time periods. Here we discuss the principles of deconvolution microscopy, describe different computational approaches for deconvolution, and discuss interpretation of deconvolved images with a particular emphasis on what artifacts may arise.     

Fluorescence Microscopy Gets Faster and Clearer: Roles of Photochemistry and Selective Illumination

Significant advances in fluorescence microscopy tend be a balance between two competing qualities wherein improvements in resolution and low light detection are typically accompanied by losses in acquisition rate and signal-to-noise, respectively. These trade-offs are becoming less of a barrier to biomedical research as recent advances in optoelectronic microscopy and developments in fluorophore chemistry have enabled scientists to see beyond the diffraction barrier, image deeper into live specimens, and acquire images at unprecedented speed. Selective plane illumination microscopy has provided significant gains in the spatial and temporal acquisition of fluorescence specimens several mm in thickness. With commercial systems now available, this method promises to expand on recent advances in 2-photon deep-tissue imaging with improved speed and reduced photobleaching compared to laser scanning confocal microscopy. Superresolution microscopes are also available in several modalities and can be coupled with selective plane illumination techniques. The combination of methods to increase resolution, acquisition speed, and depth of collection are now being married to common microscope systems, enabling scientists to make significant advances in live cell and in situ imaging in real time. We show that light sheet microscopy provides significant advantages for imaging live zebrafish embryos compared to laser scanning confocal microscopy.     

Light-sheet based fluorescence microscopy: the dark side of the sample finally revealed

Light-sheet based fluorescence microscopy (LSM) is an optical technique that becomes more and more popular for multi-view imaging of in vivo sample in its physiological environment. LSM combines the advantages of the direct optical sectioning to the ones of optical tomography by angular scanning. In fact, a thin light-sheet illuminates laterally a section of the sample, thus limiting the effects of photobleaching and phototoxicity only to the plane of interest. The spatial resolution can be improved by combining multiple views obtained along different angle into a single data, leading to a 3D isotropic rendering of the sample. Such an approach provides several advantages in comparison to conventional 3D microscopic techniques: confocal and multiphoton microscopies. It makes LSM an optical tool suited for imaging specimens with a subcellular resolution even inside an embryo and with temporal resolution adapted for real-time monitoring of biological processes.     

Study of water migration by micro MR imaging

Magnetic Resonance (MR) microscopy is a noninvasive tool that enables high resolution imaging of water concentration in non-magnetic materials. In this study, water migration in a dense porous material (dental cement) was monitored by 1D MR microscopy. The measured concentration profiles were later analyzed via three different migration models: an imbibition model, a diffusion model and a combined model. From the best fit to the experimental data, model parameters were obtained.     

Electron cryo-microscopy of vitrified biological specimens: towards high spatial and temporal resolution

A decade after the development of electron cryo-microscopy for vitrified specimens, its advantages and limitations are analysed. Indeed, recent work carried out by different laboratories strengthens the idea that electron cryo-microscopy might soon be an alternative method to X-ray crystallography and NMR techniques for determining the structure of biological assemblies with both high spatial and temporal resolutions. High pressure freezing allows vitrification of larger volumes of biological suspensions. Thick vitrified objects can be cryosectioned. Electron cryo-microscopy of the sections gives images having a resolution better than 2 nm. Although the high resolution imaging mode under low dose conditions is not yet fully understood, microscopes are being developed to provide better and better images. Image averaging is being facilitated by the development of both crystallization and computer methods. Thus, we can expect that electron microscopy will soon become a potential technique for structural determination at atomic resolution. Finally, much effort is being devoted to improving the temporal resolution of electron cryo-microscopy. Soon, we may be able to observe molecules during their biological activity.     

A semi-automated approach towards generating three-dimensional mesh of the heart using a hybrid MRI/histology database

Both the forward and inverse problems of electrocardiography rely on the precise modelling of the anatomic and electrical properties of the thoracic tissues. This, in turn, requires good knowledge of the electrical anisotropy as well as conductivity inhomogeneity of the heart, lungs and the rest of the thorax. Cardiac electrical anisotropy is related to its microstructure (fibre length, density and orientation). We hereby present detailed three-dimensional (3D) meshes of the thorax and heart, using image data from contiguous 2D magnetic resonance (MR) imaging slices as well as a realistic 3D cardiac fibre orientation model that derives its data from high-resolution ex vivo human heart MR images and from histology specimens of heart tissue. Using specific software, we integrated the 3D thorax and heart meshes in one that addresses the related modelling requirements for the solution of the forward and inverse problems of electrocardiography.     

Advantages of intermediate X-ray energies in Zernike phase contrast X-ray microscopy

Understanding the hierarchical organizations of molecules and organelles within the interior of large eukaryotic cells is a challenge of fundamental interest in cell biology. Light microscopy is a powerful tool for observations of the dynamics of live cells, its resolution attainable is limited and insufficient. While electron microscopy can produce images with astonishing resolution and clarity of ultra-thin (< 1 μm thick) sections of biological specimens, many questions involve the three-dimensional organization of a cell or the interconnectivity of cells. X-ray microscopy offers superior imaging resolution compared to light microscopy, and unique capability of nondestructive three-dimensional imaging of hydrated unstained biological cells, complementary to existing light and electron microscopy.     

Reconstruction of 3-Dimensional Histology Volume and its Application to Study Mouse Mammary Glands

Histology volume reconstruction facilitates the study of 3D shape and volume change of an organ at the level of macrostructures made up of cells. It can also be used to investigate and validate novel techniques and algorithms in volumetric medical imaging and therapies. Creating 3D high-resolution atlases of different organs^1,2,3 is another application of histology volume reconstruction. This provides a resource for investigating tissue structures and the spatial relationship between various cellular features. We present an image registration approach for histology volume reconstruction, which uses a set of optical blockface images. The reconstructed histology volume represents a reliable shape of the processed specimen with no propagated post-processing registration error. The Hematoxylin and Eosin (H&E) stained sections of two mouse mammary glands were registered to their corresponding blockface images using boundary points extracted from the edges of the specimen in histology and blockface images. The accuracy of the registration was visually evaluated. The alignment of the macrostructures of the mammary glands was also visually assessed at high resolution.This study delineates the different steps of this image registration pipeline, ranging from excision of the mammary gland through to 3D histology volume reconstruction. While 2D histology images reveal the structural differences between pairs of sections, 3D histology volume provides the ability to visualize the differences in shape and volume of the mammary glands.     

Structural Information, Resolution, and Noise in High-Resolution Atomic Force Microscopy Topographs

AFM has developed into a powerful tool in structural biology, providing topographs of proteins under close-to-native conditions and featuring an outstanding signal/noise ratio. However, the imaging mechanism exhibits particularities: fast and slow scan axis represent two independent image acquisition axes. Additionally, unknown tip geometry and tip-sample interaction render the contrast transfer function nondefinable. Hence, the interpretation of AFM topographs remained difficult. How can noise and distortions present in AFM images be quantified? How does the number of molecule topographs merged influence the structural information provided by averages? What is the resolution of topographs? Here, we find that in high-resolution AFM topographs, many molecule images are only slightly disturbed by noise, distortions, and tip-sample interactions. To identify these high-quality particles, we propose a selection criterion based on the internal symmetry of the imaged protein. We introduce a novel feature-based resolution analysis and show that AFM topographs of different proteins contain structural information beginning at different resolution thresholds: 10 Å (AqpZ), 12 Å (AQP0), 13 Å (AQP2), and 20 Å (light-harvesting-complex-2). Importantly, we highlight that the best single-molecule images are more accurate molecular representations than ensemble averages, because averaging downsizes the z-dimension and “blurs” structural details.Abbreviations: 2D, two-dimensional; 3D, three-dimensional; ACV, auto-correlation value; AFM, atomic force microscopy; AQP0, aquaporin-0; AQP2, aquaporin-2; AqpZ, aquaporin-Z; bR, bacteriorhodopsin; CCV, cross-correlation value; CTF, contrast transfer function; DPR, differential phase residual; EM, electron microscopy; FRC, Fourier ring correlation; FSC, Fourier shell correlation; IS, internal symmetry; LH2, light-harvesting-complex 2; RMSD, root mean-square deviation; SD, standard deviation; SNR, signal/noise ratio; SSNR, spectral signal/noise ratio     

Applications of a bilateral denoising filter in biological electron microscopy

Due to the sensitivity of biological sample to the radiation damage, the low dose imaging conditions used for electron microscopy result in extremely noisy images. The processes of digitization, image alignment, and 3D reconstruction also introduce additional sources of noise in the final 3D structure. In this paper, we investigate the effectiveness of a bilateral denoising filter in various biological electron microscopy applications. In contrast to the conventional low pass filters, which inevitably smooth out both noise and structural features simultaneously, we found that bilateral filter holds a distinct advantage in being capable of effectively suppressing noise without blurring the high resolution details. In as much, we have applied this technique to individual micrographs, entire 3D reconstructions, segmented proteins, and tomographic reconstructions.     

4Pi-confocal imaging in fixed biological specimens.

By combining the wavefronts produced by two high-aperture lenses, two-photon 4Pi-confocal microscopy allows three-dimensional imaging of transparent biological specimens with axial resolution in the 100-140-nm range. We reveal the imaging properties of a two-photon 4Pi-confocal microscope as applied to a fixed cell. We demonstrate that a fast, linear point deconvolution suffices to achieve axially superresolved 3D images in the cytoskeleton. Furthermore, we describe stringent algorithms for alignment and control of the two lenses. We also show how to compensate for the effects of a potential refractive index mismatch of the mounting medium with respect to the immersion system.