Regioselective Enzymatic Hydrolysis of 3′,5′-DI-O-Acetylthymidine and Observation of a Surface Effect Due to Polystyrene

The selective enzymatic hydrolysis of 3′,5′-di-O-acetylthyidine (1) was studied. The lipases from porcine pancreas and Aspergillus niger, and pig liver esterase, all catalysed selective hydrolysis of the 5′O-acetyl group, but the lipase from Candida cylindracea catalysed selective hydrolysis of the 3′-O-acetyl group. Highest selectivity, leading to essentially pure 3′-O-acetylthymidine, was achieved using porcine pancreatic lipase in dilute solution at pH 7.5. Provision of an artificial interface in the form of polystyrene beads led to a significant increase in the rate of hydrolysis, accompanied by a marked fall in selectivity. Other changes in the hydrolysis conditions, such as raising the concentration of substrate or adding cosolvent, also led to a fall in selectivity.     

Lactones 29 . Enzymatic resolution of racemic γ-lactones

Studies on the application of commercially available enzymes to resolution of the racemic unsaturated γ-lactones: 5-(3-methylbutylidene)-4-methyl-tetrahydrofuran-2-one (1a) and 5-(3,3-dimethylbutylidene)-4-methyl-tetrahydrofuran-2-one (2a) are presented. Lipase PS, Rhizopus niveus lipase, Rhizopus arrhizus lipase, porcine pancreas lipase and hog liver esterase transformed substrates into their respective γ-keto acids with good efficiency (50-75%). Three of them hydrolysed the studied lactones with moderate enantioselectivity. Enantiomeric excesses determined by GC for the unreacted lactones were in the range of 20-60%. Lipase PS preferentially hydrolysed the (+) enantiomers of lactones 1a and 2a whereas R. niveus lipase hydrolysed the (-) enantiomers, respectively.     

Activities in Crude Porcine Pancreatic Lipase: Enantioselectivity in Hydrolysis of the Diacetate of 2-Phenylpropane-1,3-Diol

The hydrolysis of a prochiral diacetate by porcine pancreatic lipase is catalysed by the purified enzyme, not by an enzyme present in the crude enzyme but absent from the purified enzyme, as previously reported.     

Mathematical Modelling of Lipase Catalysed Resolution of O-Acetyl and O-Formyl Derivatives of Secondary Alcohols

Lipase catalysed transesterification of O-acetyl and O-formyl derivatives of several sterically hindered secondary alcohols with n-butanol is studied. The reaction is mathematically modelled and the rate constants in the model are evaluated by transient parameter estimation procedure. Several models are considered for predicting the enantiomeric excess (ee) of the product and compared with experimental observations. It is found that the maximum ee depends only on the rate constants of the two competing reactions and not on the order of reaction. A second order model is found to predict the observed behaviour well. When the data is fitted to an equilibrium type of model developed by Chen et al. (1987), it is found that the rate of forward reaction is several orders of magnitude larger than the rate of reverse reaction. The effect of acetyl and formyl groups on the reactivity and selectivity are also discussed.     

Lipase-Catalyzed Regioselective Acylation and Deacylation of Glucose Derivatives

In the development of an efficient synthesis of 1-O-decanoyl-2,3,4,6-tetra-O-acetyl-β-D-glucose (β-2) several lipase-based approaches have been explored. Among five immobilized Upases tested, the lipase from Candida antarctica proved particularly efficient for catalyzing selective hydrolysis in the 1-position of 1,2,3,4,6-penta-O-acetyl-β-D-glucose (β-1). Using triethylamine as catalyst, the hydrolysis product 2,3,4,6-tetra-O-acetyl-D-glucose (3) can be esterified with decanoyl chloride to form β-2 selectively, thereby providing an efficient chemo-enzymatic synthesis starting from readily available raw materials. Attempts to produce β-2 from β-1 by lipase-catalyzed interesterification or to esterify 3 with decanoic acid using a lipase as catalyst were unsuccessful. The latter finding was explained by the hemiacetal OH group of glucose being unable to act as nucleophile in the lysis of the lipase acyl-enzyme intermediate. Furthermore, β-2 was found to bee a too bulky substrate to fit into the active site of any of the lipases tested.     

Lipase-Catalyzed Resolution of Isopropylidene Glycerol: Effect of Co-Solvents on Enantioselectivity

The resolution of 1,2-O-isopropylidene glycerol via enzyme catalyzed hydrolysis of the corresponding benzoic ester was investigated. Using lipase PS from Pseudomonas cepacia, we determined the influence of organic co-solvents on the activity and enantioselectivity of the enzyme. The performance of the lipase was correlated to the nature (logP, ε,μ and the percentage of the organic media. The highest enzymatic activity was found in solvents completely miscible or completely immiscible in water. The enzyme stereoselectivity was inversely related to the logP of the solvent.     

Biocatalytic, Enantioselective Preparations of (R)- and (S)-Ethyl 4-Chloro-3-Hydroxybutanoate, a Useful Chiral Synthon

The synthesis of optically active ethyl 4-chloro-3-X-butanoate derivatives la-d (X = OH, a; OCOCH₃, b; OCOC₃H₇, c; OCH₂C₆H₅, d) was realized using various biocatalytic approaches such as microbiological reduction of ethyl 4-chloro-3-oxobutanoate 2 with lactic acid bacteria, hydrolysis of lb-d by the hydrolytic enzymes PLE and BChE and the transesterification of la catalyzed by a lipase from Pseudomonas fluorescens (PFL).     

Ionic liquid anchored substrate for enzyme catalysed kinetic resolution

A hydroxyl group appended task specific ionic liquid was designed and synthesised. The ionic liquid was used as a vehicle for the substrate of our interest for lipase catalysed kinetic resolution. The ionic liquid anchored ibuprofen underwent Candida antarctica lipase catalysed hydrolysis yielding the S-enantiomer. The strategy facilitated easy post-resolution isolation of the enantiomers and also carries the prospect of recyclability.     

Carotenol fatty acid esters: easy substrates for digestive enzymes?

To study the specificity of gastric lipases on carotenoid mono- and diesters, an enzymatic assay was applied. Digestions were carried out in phosphate buffer at pH 7.4 and 37 °C. As substrates we employed oleoresins from marigold (Tagetes erecta L.; lutein diesters), red paprika (Capsicum annuum L., mainly capsanthin diesters), papaya (Carica papaya L.; β-cryptoxanthin esters), and loquat (Eriobotrya japonica Lindl.; β-cryptoxanthin esters) as well as retinyl palmitate. These were reacted with porcine pancreatic lipase, porcine pancreatin, porcine cholesterol esterase, and human pancreatic lipase. As reference enzyme a yeast lipase from Candida rugosa was applied. A high turnover could be observed with porcine pancreatic lipase and porcine cholesterol esterase, indicating cholesterol esterase to be a plausible candidate for generation of free carotenoids in the gut. Human pancreatic lipase accepted only retinyl palmitate as substrate, carotenoid mono- and diesters were not hydrolyzed. The assay permits an approach for calculation of enzymatic activities towards carotenoid esters as substrates for the first time, which is based on the amount of enzyme formulation, present in the assay (U/mg solid). Furthermore, these studies provide deeper insight into carotenoid ester bioaccessibility.     

Quantum mechanical study of Burkholderia cepacia lipase enantioselectivity

Quantum mechanical, semiempirical (AM1) and ab initio (6-31G*) study of the Burkholderia cepacia lipase (BCL) catalysed reactions of the secondary alcohol esterification and its ester hydrolysis is presented. We have selected BCL for our study because of numerous experimental results available, but also because of its broad selectivity and stability that makes it interesting for industrial use. Previously we developed models for predicting lipase stereo-selectivity towards primary and secondary alcohols according to their structural parameters. In this work we show that not all of the experimentally determined binding modes are catalytically competent and that additional molecular modelling should be accomplished in order to find good starting points to study chemical reactions. The binding modes from which chemical modification of a substrate is possible are the most relevant for understanding enzyme selectivity and for the rational enzyme engineering.

We also investigated the influence of the tetrahedral atom type, C and P, upon the energy barriers in the proton transfer reactions from the catalytic histidine (His286) to either the catalytic serine (Ser87) or the alcohol oxygen of the substrate.     

Different phyllosilicates as supports for lipase immobilisation

The aim of this work was to determine the enzymatic activities resulting from the adsorption of Rhizomucor miehei lipase (RML) and Candida cylindracea lipase (CCL) onto three different phyllosilicates (sepiolite, palygorskite and montmorillonite), comparing the resultant activities with those obtained following similar immobilisation technique on a widely used resin (Duolite A-568). Due to the different adsorption mechanisms produced, different derivatives with higher hydrolytic activities can be obtained. Comparing the clays tested, the results showed that, in comparison with the laminar silicate (montmorillonite sample) and Duolite A-568 (spherical particles), fibrous materials (palygorskite and sepiolite) resulted in derivatives with higher hydrolytic activities in the hydrolysis of different ethyl esters. Moreover, according to the data obtained with the electrophoresis, the selectivity of immobilisation for RML in the case of fibrous silicates was optimal. As a conclusion, and according to the activities and selectivities measured, at least two out of the four studied materials (sepiolite and palygorskite) would be useful as supports for immobilisation for proteins of relatively low molecular weight (such as RML) for further use in biotransformations, while for C. cylindracea the immobilisation onto duolite rendered a derivative specially active in the hydrolysis of ethyl formiate (esterasic activity).     

The acetates of p-nitrophenyl alpha-L-arabinofuranoside--regioselective preparation by action of lipases

All possible di-O-acetates and mono-O-acetates of p-nitrophenyl alpha-L-arabinofuranoside were prepared by chemoenzymatic way using lipases. The 2,3-di-O-acetate was obtained in 90% yield by deacetylation of the primary acetyl group of per-O-acetylated p-nitrophenyl alpha-L-arabinofuranoside by Candida cylindracea lipase (CCL) or Candida rugosa lipase (LAY). The 2,5- and 3,5-di-O-acetates were obtained by acetylation of p-nitrophenyl alpha-L-arabinofuranoside by Pseudomonas cepacia lipase (LPS-30) in organic solvents. The 5-O-acetate was regioselectively synthesised in 95% yield by acetylation of p-nitrophenyl alpha-L-arabinofuranoside catalysed by porcine pancreas lipase. Finally, the 2- and 3-O-acetates of p-nitrophenyl alpha-L-arabinofuranoside were obtained in two steps. The enzymatic di-O-acetylation of p-nitrophenyl alpha-L-arabinofuranoside by LPS-30 was followed by enzymatic hydrolysis of the primary acetyl group by CCL or LAY.     

Enzymatic resolution of (R, S)-Naproxen in water-saturated ionic liquid

A water-saturated ionic liquid has been exploited for resolution of (R, S)-Naproxen by lipase-catalyzed hydrolysis to enhance the conversion and facilitate product recovery. From the enantioselectivity and activity of lipase, water-saturated [bmim]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) was selected as the best reaction medium. To prevent the dissolution of lipase in the ionic liquid, a weakly polar, amorphous multiporous silica YWG-C₆H₅ was used as a support for immobilization. The production of (S)-Naproxen was initially performed in a batch reactor containing 20 mL of substrate solution. After 72 h reaction, 98.2% enantiomeric excess of the (S)-Naproxen was obtained with 28.3% hydrolysis conversion. The unconventional solvent properties of ionic liquids have been exploited in reaction medium recycling, product recovery and water recruiting schemes. In a repetitive batch reaction system, the immobilized lipase could be repeatedly used for 5 times with only a slight reduction in reaction conversion.     

Overexpression of Serratia marcescens lipase in Escherichia coli for efficient bioresolution of racemic ketoprofen

Lipase from Serratia marcescens ECU1010 was cloned and overexpressed in E. coli. After optimization, the maximum lipase activities reached 5000–6000 U/l and this recombinant lipase could enantioselectively hydrolyze (S)-ketoprofen esters into (S)-ketoprofen. Among six alkyl esters of racemic ketoprofen investigated, this lipase showed the best enantioselectivity for the kinetic resolution of ketoprofen ethyl ester, with an ee_p (enantiomeric excess of product) of 91.6% and E-value of 63 obtained at 48.2% conversion. Twelve nonionic surfactants were tested for enhancing the enantioselectivity of this lipase in the bioresolution of ketoprofen ethyl ester. A very high E-value of 1084 was achieved, with an optical purity of >99% ee_p and a yield of 42.6% in the presence of 3% Brij 92V. Further studies showed that the selectivity of the lipase was improved with the increase of Brij 92V concentration. The substrate (ketoprofen ethyl ester) does not inhibit the lipase activity, while the product (S)-ketoprofen inhibits the lipase activity to some extent. These results indicate that the S. marcescens lipase is very useful for biocatalytic production of chiral profens such as (S)-ketoprofen.     

Supplementation of watermelon peels as an enhancer of lipase and esterase production by Yarrowia lipolytica in solid-state fermentation and their potential use as biocatalysts in poly(ethylene terephthalate) (PET) depolymerization reactions

Abstract

Yarrowia lipolytica is a yeast that presents high biotechnological potential due to its ability to produce many metabolites, among them lipases and esterases, which are important industrial biocatalysts. Since Brazil is an agroindustrial country, it generates an enormous diversity of residues or byproducts that can be used as a platform for biomolecules production. This work aims to evaluate lipase and esterase production by Y. lipolytica via solid-state fermentation using soybean bran and soybean bran supplemented with watermelon peels in different contents, and subsequent use of the enzyme extracts for poly(ethylene terephthalate) (PET) hydrolysis. Supplementation of watermelon peels in the lowest content led to an improvement of lipase activity in almost 31%, reaching 75.22?U g^?1. Esterase productivity was 1.5-fold higher when 20?wt% of watermelon peels were added to the media culture. Timecourse evaluation of enzymes production showed a maximum lipase activity in 14?h and similar esterase activity in 14 and 20?h of fermentation. Proteases production were also intensified in supplemented samples. Enzymes produced with 5?wt% watermelon peels supplementation led to higher terephthalic acid concentration (up to 42.02?µmol L^?1) during PET depolymerization. Results suggest a great potential of enzyme production in low cost fermentative media to act as biocatalysts in PET hydrolysis reactions.     

Fatty acid preference of mycelium-bound lipase from a locally isolated strain of <Emphasis Type="Italic">Geotrichum candidum</Emphasis>

Mycelium-bound lipase (MBL) was prepared using a strain of Geotrichum candidum isolated from local soil. At the time of maximum lipase activity (54 h), the mycelia to which the lipase was bound were harvested by filtration and centrifugation. Dry MBL was prepared by lyophilizing the mycelia obtained. The yield of MBL was 3.66 g/l with a protein content of 44.11 mg/g. The lipase activity and specific lipase activity were 22.59 and 510 U/g protein, respectively. The moisture content of the MBL was 3.85%. The activity of free (extracellular) lipase in the culture supernatant (after removal of mycelia) was less than 0.2 U/ml. The MBL showed selectivity for oleic acid over palmitic acid during hydrolysis of palm olein, indicating that the lipase from G. candidum displayed high substrate selectivity for unsaturated fatty acid containing a cis-9 double bond, even in crude form. This unique specificity of MBL could be a direct, simple and inexpensive way in the fats and oil industry for the selective hydrolysis or transesterification of cis-9 fatty acid residues in natural triacylglycerols.     

Lipase-induced hydrolysis of castor oil: effect of various metals

The ability of an extracellular lipase from Pseudomonas aeruginosa KKA-5 to commence hydrolysis of castor oil in the presence of various metal chlorides, was investigated. Apart from CaCl₂ (commonly used for castor oil hydrolysis), AlCl₃ (group IIIB), CrCl₃ (group VIA) and MgCl₂ (group IIA) displayed enhanced hydrolysis capability. Specifically, our statistics show that with respect to time, when Cr³⁺ was used, hydrolysis of castor oil was four times faster than that of calcium, and 1.6 times faster with regards to Al³⁺. The chlorides of group VIII and alkali metals had no effect on hydrolysis. Group IV metal chlorides did not enhance lipase activity and inhibited castor oil hydrolysis. The effect of metal ions from other groups on lipase activity is also reported. Received 14 August 1998/ Accepted in revised form 22 October 1998     

Castor-bean acid lipase catalysed hydrolysis of triacylglycerols does not involve C-2 → C-1,3 transacylation

The hydrolysis of a series of triacylglycerol analogs catalysed by castor-bean acid lipase was studied at 30° and pH 4.20. Iso-propyl esters underwent lipolysis, thus refuting the mechanistic proposition that hydrolysis at C-2 in triacylglycerols occurs via a slow transfer of the acyl moiety from C-2 to either C-1 or C-3, followed by enzymic hydrolytic action.     

A simple method to determine the enantiomeric ratio in enantioselective biocatalysis

The enantiomeric ratio (E) is commonly used to characterize the enantioselectivity in enzyme-catalyzed kinetic resolution. In this paper this parameter is directly derived from the enantiomeric excess of substrate and product. This is formally more correct than using Chen's equation after calculating the degree of conversion from both ee values using the relation of Sih and Wu. New expressions and useful graphs have been generated for reversible and irreversible uni-uni reactions. The theoretical predictions have been verified experimentally for various reactions. Values for E and the thermodynamic equilibrium constant,K_EQ, were obtained for a ( -dehalogenase-catalyzed dehalogenation, a hydrolysis reaction by porcine pancreatic lipase, and for C. Cylindracea lipase-catalyzed esterification and transesterification. In view of the current developments in the field of chiral analysis, this method is an easily available tool in the quantitative treatment of enzyme-catalyzed resolution of enantiomers.     

The Effect of Substrate Hydrophobicity on the Kinetic Behaviour of Immobilized Candida rugosa Lipase

Candida rugosa lipase (EC 3.1.1.3.) was immobilized in a hydrophilic polyurethane foam and used in the hydrolysis of olive oil, in H-hexane. The results obtained were compared with those from a previous study, in which the same lipase preparation was used in the esterification of ethanol with butyric acid.

The initial rate of hydrolysis increased exponentially with increasing olive oil concentration. In contrast, for the esterification reaction, Michaelis-Menten kinetics with inhibition by both substrates, had been observed.

The effect of medium viscosity, stirring conditions and size of immobilization particles could not explain the observed kinetics of the hydrolytic reaction. However, a direct relationship was observed between the log P values of the reaction medium and the initial rate of hydrolysis, i.e., activation of the immobilized Candida rugosa lipase appears to be promoted by a high hydrophobicity of the reaction medium.

In the case of the esterification reaction, no similar correlation was found.