Identification of the btuCED polypeptides and evidence for their role in vitamin B12 transport in Escherichia coli.

Passage of vitamin B12 across the outer and cytoplasmic membranes of Escherichia coli occurs in two steps, each involving independent transport systems. Since the vitamin accumulated in btuC or btuD mutants is readily released from the cell by chase or osmotic shock and does not undergo the usual metabolic conversions, the products of these genes might participate in transport across the cytoplasmic membrane. Mutations in btuC and btuD are complemented by recombinant plasmids carrying a 3,410-base-pair HindIII-HincII DNA fragment. Transposon Tn1000 mutagenesis and subcloning defined the location of these two genes and showed that they are separated by approximately 800 base pairs. The polypeptides elicited by this fragment and its derivatives were identified by using a maxicell system. The apparent molecular weight of the btuC product was approximately 26,000, that of the btuD product was 29,000. Both polypeptides were associated with the cell membrane. Transposon insertions in the region between btuC and btuD, as well as those in the two genes, conferred a deficiency in vitamin B12 utilization and transport when they were crossed onto the chromosome. This region, termed btuE, encoded a 22,000-Mr polypeptide and lesser amounts of a 20,000-Mr species. A portion of the BtuE protein was released from maxicells by osmotic shock or spheroplast formation. The relative production of BtuE and BtuD in response to plasmids carrying transposon insertions suggested that the three genes are arranged in an operon in the order btuC-btuE-btuD and that internal promoters exist since polarity was incomplete. Substantial elevation of transport activity was engendered by plasmids carrying the intact btu region, but not when any of the btu genes was disrupted. The btuCED region thus may encode a transport system for passage of vitamin B12 across the cytoplasmic membrane. This system bears similarities to periplasmic binding protein-dependent transport systems, although the putative periplasmic component is not required for its function.     

Two outer membrane transport systems for vitamin B12 in Salmonella typhimurium.

The involvement of an outer membrane transport component for vitamin B12 uptake in Salmonella typhimurium, analogous to the btuB product in Escherichia coli, was investigated. Mutants of S. typhimurium selected for resistance to bacteriophage BF23 carried mutations at the btuB locus (butBS) (formerly called bfe, at the analogous map position as the E. coli homolog) and were defective in high-affinity vitamin B12 uptake. The cloned E. coli btuB gene (btuBE) hybridized to S. typhimurium genomic DNA and restored vitamin B12 transport activity to S. typhimurium btuBS mutants. An Mr-60,000 protein in the S. typhimurium outer membrane was repressed by growth with vitamin B12 and was eliminated in a btuBS mutant. The btuBS product thus appears to play the same role in vitamin B12 transport by S. typhimurium as does the E. coli btuBE product. A second vitamin B12 transport system that is not present in E. coli was found by cloning a fragment of S. typhimurium DNA that complemented btuB mutants for vitamin B12 utilization. In addition to this plasmid with a 6-kilobase insert of S. typhimurium DNA, vitamin B12 utilization by E. coli btuB strains required the btuC and btuD products, necessary for transport across the cytoplasmic membrane, but not the btuE or tonB product. The plasmid conferred low levels of vitamin B12-binding and energy-dependent transport activity but not susceptibility to phage BF23 or utilization of dicyanocobinamide. The cloned S. typhimurium DNA encoding this new transport system did not hybridize to the btuBE gene or to E. coli chromosomal DNA and therefore does not carry the S. typhimurium btuBS locus. Increased production of an Mr -84,000 polypeptide associated with the outer membrane was seen. The new locus appears to be carried on the large plasmid in most S. typhimurium strains. Thus S. typhimurium possesses both high- and low-affinity systems for uptake of cobalamins across the outer membrane.     

Identification of the Periplasmic Cobalamin-Binding Protein BtuF of Escherichia coli

Cells of Escherichia coli take up vitamin B(12) (cyano-cobalamin [CN-Cbl]) and iron chelates by use of sequential active transport processes. Transport of CN-Cbl across the outer membrane and its accumulation in the periplasm is mediated by the TonB-dependent transporter BtuB. Transport across the cytoplasmic membrane (CM) requires the BtuC and BtuD proteins, which are most related in sequence to the transmembrane and ATP-binding cassette proteins of periplasmic permeases for iron-siderophore transport. Unlike the genetic organization of most periplasmic permeases, a candidate gene for a periplasmic Cbl-binding protein is not linked to the btuCED operon. The open reading frame termed yadT in the E. coli genomic sequence is related in sequence to the periplasmic binding proteins for iron-siderophore complexes and was previously implicated in CN-Cbl uptake in SALMONELLA: The E. coli yadT product, renamed BtuF, is shown here to participate in CN-Cbl uptake. BtuF protein, expressed with a C-terminal His(6) tag, was shown to be translocated to the periplasm concomitant with removal of a signal sequence. CN-Cbl-binding assays using radiolabeled substrate or isothermal titration calorimetry showed that purified BtuF binds CN-Cbl with a binding constant of around 15 nM. A null mutation in btuF, but not in the flanking genes pfs and yadS, strongly decreased CN-Cbl utilization and transport into the cytoplasm. The growth response to CN-Cbl of the btuF mutant was much stronger than the slight impairment previously described for btuC, btuD, or btuF mutants. Hence, null mutations in btuC and btuD were constructed and revealed that the btuC mutant had a strong impairment similar to that of the btuF mutant, whereas the btuD defect was less pronounced. All mutants with defective transport across the CM gave rise to frequent suppressor variants which were able to respond at lower levels of CN-Cbl but were still defective in transport across the CM. These results finally establish the identity of the periplasmic binding protein for Cbl uptake, which is one of few cases where the components of a periplasmic permease are genetically separated.     

Nucleotide sequences of the fecBCDE genes and locations of the proteins suggest a periplasmic-binding-protein-dependent transport mechanism for iron(III) dicitrate in Escherichia coli.

The fec region of the Escherichia coli chromosome determines a citrate-dependent iron(III) transport system. The nucleotide sequence of fec revealed five genes, fecABCDE, which are transcribed from fecA to fecE. The fecA gene encodes a previously described outer membrane receptor protein. The fecB gene product is formed as a precursor protein with a signal peptide of 21 amino acids; the mature form, with a molecular weight of 30,815, was previously found in the periplasm. The fecB genes of E. coli B and E. coli K-12 differed in 3 nucleotides, of which 2 gave rise to conservative amino acid exchanges. The fecC and fecD genes were found to encode very hydrophobic polypeptides with molecular weights of 35,367 and 34,148, respectively, both of which are localized in the cytoplasmic membrane. The fecE product was a rather hydrophilic but cytoplasmic membrane-bound protein of Mr 28,189 and contained regions of extensive homology to ATP-binding proteins. The number, structural characteristics, and locations of the FecBCDE proteins were typical for a periplasmic-binding-protein-dependent transport system. It is proposed that after FecA- and TonB-dependent transport of iron(III) dicitrate across the outer membrane, uptake through the cytoplasmic membrane follows the binding-protein-dependent transport mechanism. FecC and FecD exhibited homologies to each other, to the N- and C-terminal halves of FhuB of the iron(III) hydroxamate transport system, and to BtuC of the vitamin B12 transport system. FecB showed some homology to FhuD, suggesting that the latter may function in the same manner as a binding protein in iron(III) hydroxamate transport. The close homology between the proteins of the two iron transport systems and of the vitamin B12 transport system indicates a common evolution for all three systems.     

High-affinity L-arabinose transport operon. Nucleotide sequence and analysis of gene products

The nucleotide sequence of the "high-affinity" L-arabinose transport operon has been determined 3' from the regulatory region and found to contain three open reading frames designated araF, araG and araH. The first gene 3' to the regulatory region, araF, encodes the 23-residue signal peptide and the 306-residue mature form of the L-arabinose binding protein (33,200 Mr). The binding protein, which has been described elsewhere, is hydrophilic, soluble and found in the periplasm of Escherichia coli. This gene is followed by an intragenic space of 72 nucleotides, which contains a region of dyad symmetry 23 nucleotides long capable of forming an 11-member stem-loop. The second gene, designated araG, contains an open reading frame capable of encoding an equally hydrophilic protein containing 504 residues (55,000 Mr). Following a 14-nucleotide spacer, which does not appear to have any secondary structure, the third open reading frame, herein designated araH, is capable of encoding a hydrophobic protein containing 329 residues (34,000 Mr) that can only be envisioned as having an integral membrane location. 3' to araH there is a T-rich region containing a 24-nucleotide area of dyad symmetry centered 55 nucleotides from the termination codon. Analysis of the derived primary sequences of the araG and araH products indicates the nature and potential features of these components. The araG protein was found to possess internal homology between its amino and carboxyl-terminal halves, suggesting a common origin. The araG gene product has been shown to be homologous to the rbsA gene product, the hisP product, the ptsB product and the malK product, all of which presumably play similar roles in their respective transport systems. Putative ATP binding sites are observed within the regions of homology. The araH gene product has been shown to be homologous to the rbsC gene product, which is the first observed homology between two purported membrane proteins.     

Characterization of the mgl operon of Escherichia coli by transposon mutagenesis and molecular cloning

We used transposon insertion mutagenesis, molecular cloning, and a novel procedure for in vitro construction of polar and nonpolar insertion mutations to characterize the genetic organization and gene products of the beta-methylgalactoside (Mgl) transport system, which utilizes the galactose-binding protein. The data indicate that the mgl operon contained three genes, which were transcribed in the order mglB, mglA, and mglC. The first gene coded for the 31,000 Mr galactose-binding protein, which was synthesized as a 3,000-dalton-larger precursor form. The mglA product was a 50,000 Mr protein which was tightly associated with the membrane, and the mglC product was a 38,000 Mr protein which was apparently loosely associated with the membrane and was probably located on the internal face of the cytoplasmic membrane. Identification of gene products was facilitated by in vitro insertion of a fragment of Tn5 containing the gene conferring kanamycin resistance into a restriction site in the operon. The fragment proved to have a polar effect on the expression of promoter-distal genes only when inserted in one of the two possible orientations. The three identified gene products were necessary and apparently sufficient for transport activity, but only the binding protein was required for chemotaxis towards galactose. The transport system appeared to contain the minimum number of components for a binding protein-related system: a periplasmic recognition component, a transmembrane protein, and a peripheral membrane protein that may be involved in energy linkage.     

Point mutations in two conserved glycine residues within the integral membrane protein FhuB affect iron(II) hydroxamate transport

Summary A region of substantial homology, comprising 32 amino acids around a highly conserved glycine residue, is located near the C-terminal ends of the hydrophobic Fhu, Fec, Fep, Fat, and Btu transport proteins involved in the uptake of ferrisiderophores and vitamin B₁₂ into Escherichia coli and Vibrio anguillarum. Furthermore, a region similar in location and sequence containing an invariant glycine at an equivalent position was identified in the hydrophobic component of all other periplasmic binding protein-dependent (PBT) systems. In the FhuB protein, which is twice the size of the other PBT-related inner membrane proteins and which displays an internal homology, two conserved glycine residues are present. Alteration of Gly at positions 226 and 559 to Ala, Val, or Glu reduced iron(III) hydroxamate uptake, suggesting that this homologous region may play a general role in the mechanism of PBT-dependent transport.     

In vivo reconstitution of an active siderophore transport system by a binding protein derivative lacking a signal sequence

Transport of iron(III) hydroxamates across the inner membrane ofEscherichia coli depends on a binding protein-dependent transport system composed of the FhuB,C and D proteins. The FhuD protein, which is synthesized as a precursor and exported through the cytoplasmic membrane, represents the periplasmic binding protein of the system, accepting as substrates a number of hydroxamate siderophores and the antibiotic albomycin. A FhuD derivative, carrying an N-terminal His-tag sequence instead of its signal sequence and therefore not exported through the inner membrane, was purified from the cytoplasm. Functional activity, comparable to that of wild-type FhuD, was demonstrated for this His-tag-FhuD in vitro by protease protection experiments in the presence of different substrates, and in vivo by reconstitution of iron transport in afhuD mutant strain. The experimental data demonstrate that the primary sequence of the portion corresponding to the mature FhuD contains all the information required for proper folding of the polypeptide chain into a functional solute-binding protein. Moreover, purification of modified periplasmic proteins from the cytosol may be a useful approach for recovery of many polypeptides which are normally exported across the inner membrane and can cause toxicity problems when overproduced.     

Identification of a locus involved in the utilization of iron by Actinobacillus pleuropneumoniae

Abstract The cloned afu locus of Actinobacillus pleuropneumoniae restored the ability of an Escherichia coli K-12 mutant ( aroB ) to grow on iron-limited media. DNA sequence analysis of the fragment showed that there are three genes designated afuA, afuB and afuC (Actinobacillus ferric uptake) that encode products similar to the SfuABC proteins of Serratia marcescens , the HitABC proteins of Haemophilia influenzae , the FbpABC proteins of Neisseria gonorrhoeae and the YfuABC proteins of Yersinia enterocolitica . The three genes encode a periplasmic iron-binding protein (AfuA), a highly hydrophobic integral cytoplasmic membrane protein with two consensus permease motifs (AfuB) and one hydrophilic peripheral cytoplasmic membrane protein with Walker ATP-binding motifs (AfuC), respectively. This system has been shown to constitute a periplasmic binding protein-dependent iron transport system in these organisms. The afuABC operon is locating approximately 200 bp upstream of apxIC gene, but transcribed in opposite direction to the ApxI-toxin genes.     

Nucleotide sequences of the sfuA, sfuB, and sfuC genes of Serratia marcescens suggest a periplasmic-binding-protein-dependent iron transport mechanism.

The cloned sfu region of the Serratia marcescens chromosome confers the ability to grow on iron-limited media to an Escherichia coli K-12 strain that is unable to synthesize a siderophore. This DNA fragment was sequenced and found to contain three genes termed sfuA, sfuB, and sfuC, arranged and transcribed in that order. The sfuA gene encoded a periplasmic polypeptide with calculated molecular weights of 36,154 for the precursor and 33,490 for the mature protein. The sfuB gene product was a very hydrophobic protein with a molecular weight of 56,589. The sfuC gene was found to encode a rather polar but membrane-bound protein with a molecular weight of 36,671 which exhibited strong homology to consensus sequences of nucleotide-binding proteins. The number, structural characteristics, and locations of the SfuABC proteins were typical of a periplasmic-binding-protein-dependent transport mechanism. How Fe3+ is solubilized and taken up across the outer membrane remains an enigma.     

Phosphorylation of the Periplasmic Binding Protein in Two Transport Systems for Arginine Incorporation in Escherichia coli K-12 Is Unrelated to the Function of the Transport System

In Escherichia coli K-12, the accumulation of arginine is mediated by two distinct periplasmic binding protein-dependent transport systems, one common to arginine and ornithine (AO system) and one for lysine, arginine, and ornithine (LAO system). Each of these systems includes a specific periplasmic binding protein, the AO-binding protein for the AO system and the LAO-binding protein for the LAO system. The two systems include a common inner membrane transport protein which is able to hydrolyze ATP and also phosphorylate the two periplasmic binding proteins. Previously, a mutant resistant to the toxic effects of canavanine, with low levels of transport activities and reduced levels of phosphorylation of the two periplasmic binding proteins, was isolated and characterized (R. T. F. Celis, J. Biol. Chem. 265:1787–1793, 1990). The gene encoding the transport ATPase enzyme (argK) has been cloned and sequenced. The gene possesses an open reading frame with the capacity to encode 268 amino acids (mass of 29.370 Da). The amino acid sequence of the protein includes two short sequence motifs which constitute a well-defined nucleotide-binding fold (Walker sequences A and B) present in the ATP-binding subunits of many transporters. We report here the isolation of canavanine-sensitive derivatives of the previously characterized mutant. We describe the properties of these suppressor mutations in which the transport of arginine, ornithine, and lysine has been restored. In these mutants, the phosphorylation of the AO- and LAO-binding proteins remains at a low level. This information indicates that whereas hydrolysis of ATP by the transport ATPase is an obligatory requirement for the accumulation of these amino acids in E. coli K-12, the phosphorylation of the periplasmic binding protein is not related to the function of the transport system.     

Nucleotide binding by membrane components of bacterial periplasmic binding protein-dependent transport systems.

Bacterial periplasmic binding protein-dependent transport systems require the function of a specific substrate-binding protein, located in the periplasm, and several membrane-bound components. We present evidence for a nucleotide-binding site on one of the membrane components from each of three independent transport systems, the hisP, malK and oppD proteins of the histidine, maltose and oligopeptide permeases, respectively. The amino acid sequence of the oppD protein has been determined and this protein is shown to share extensive homology with the hisP and malK proteins. Three lines of evidence lead us to propose the existence of a nucleotide-binding site on each of these proteins. A consensus nucleotide-binding sequence can be identified in the same relative position in each of the three proteins. The oppD protein binds to a Cibacron Blue affinity column and can be eluted by ATP but not by CTP or NADH. The oppD protein is labelled specifically by the nucleotide affinity analogue 5'-p-fluorosulphonylbenzoyladenosine. The identification of a nucleotide-binding site provides strong evidence that transport by periplasmic binding protein-dependent systems is energized directly by the hydrolysis of ATP or a closely related nucleotide. The hisP, malK and oppD proteins are thus responsible for energy-coupling to their respective transport systems.     

Cloning and expression of the gene for the vitamin B12 receptor protein in the outer membrane of Escherichia coli.

The transport of cyanocobalamin (vitamin B12) in cells of Escherichia coli is dependent on a receptor protein (BtuB protein) located in the outer membrane. A 9.1-kilobase pair BamHI fragment carrying the btuB gene was cloned from a specialized transducing phage into multicopy plasmids. Insertions of transposon Tn1000 which prevented production of the receptor localized btuB to a 2-kilobase pair region. Further subcloning allowed isolation of this region as a 2.3-kilobase pair Sau3A fragment. The BtuB+ plasmids were shown by maxicell analysis to encode a polypeptide with a molecular weight of 66,000 in the outer membrane. This polypeptide was missing in cells with Tn1000 insertions in btuB and was reduced in amount upon growth of plasmid-bearing cells in repressing concentrations of vitamin B12. Several Tn1000 insertions outside the 5' end of the coding region exhibited reduced production of receptor. A deletion at the 3' end of btuB resulted in formation of an altered receptor. Amplified production of this polypeptide was associated with increased levels of binding of the receptor's ligands (vitamin B12 and phage BF23), increased rates of vitamin B12 uptake, and altered susceptibility to the group E colicins. Deficiency in various major outer membrane proteins did not affect production of the btuB product, and the amplified levels of this protein partially reversed the tolerance to E colicins seen in these mutants.     

Characteristics of the gene for a spermidine and putrescine transport system that maps at 15 min on the Escherichia coli chromosome

The nucleotide sequence of the gene for the spermidine and putrescine transport system that maps at 15 min on the Escherichia coli chromosome was determined. It contained four open reading frames encoding A, B, C, and D proteins. By making several subclones, we showed that expression of all the four proteins was necessary for maximal spermidine and putrescine transport activity. A single transport system was involved in the transport of both spermidine and putrescine. The A protein (Mr 43K) was found to be associated with membranes, as shown by Western blot analysis of the cell fractions. In addition, it had consensus amino acid sequences for the nucleotide binding site. B (Mr 31K) and C (Mr 29K) proteins consisted of six putative transmembrane spanning segments linked by hydrophilic segments of variable length as shown by cell localization of the proteins synthesized in maxicells and by hydropathy profiles. D protein (Mr 39K) was inferred to be a polyamine binding protein existing in a periplasmic fraction from the results of Western blot analysis of the cell fractions and from measurements of polyamine binding to the protein. These results indicate that the spermidine and putrescine transport system can be defined as a bacterial periplasmic transport system.     

Vitamin B12 transport in Escherichia coli K12 does not require the btuE gene of the btuCED operon

Summary Transport of vitamin B₁₂ across the cytoplamic membrane ofEscherichia coli requires the products ofbtuC andbtuD, two genes in thebtuCED operon. The role ofbtuE, the central gene of this operon, was examined. Deletions withinbtuE were constructed by removal of internal restriction fragments and were crossed onto the chromosome by allelic replacement. In-frame deletions that removed 20% or 82% of thebtuE coding region did not affect expression of the distalbtuD gene. These nonpolar deletions had little effect on vitamin B₁₂ binding (whole cells or periplasmic fraction) and transport. They did not affect the utilization of vitamin B₁₂ or other cobalamins for methionine biosynthesis, even in strains with decreased outer membrane transport of vitamin B₁₂. ThebtuE mutations did not impair adenosyl-cobalamin dependent catabolism of ethanolamine or repression ofbtuB expression. Thus, despite its genetic location in the transport operon, thebtuE product plays no essential role in vitamin B₁₂ transport.     

Active transport of maltose in membrane vesicles obtained from Escherichia coli cells producing tethered maltose-binding protein.

Attempts to reconstitute periplasmic binding protein-dependent transport activity in membrane vesicles have often resulted in systems with poor and rather inconsistent activity, possibly because of the need to add a large excess of purified binding protein to the vesicles. We circumvented this difficulty by using a mutant which produces a precursor maltose-binding protein that is translocated across the cytoplasmic membrane but is not cleaved by the signal peptidase (J. D. Fikes and P. J. Bassford, Jr., J. Bacteriol. 169:2352-2359, 1987). The protein remains tethered to the cytoplasmic membrane, presumably through the hydrophobic signal sequence, and we show here that the spheroplasts and membrane vesicles prepared from this mutant catalyze active maltose transport without the addition of purified maltose-binding protein. In vesicles, the transport requires electron donors, such as ascorbate and phenazine methosulfate or D-lactate. However, inhibition by dicyclohexylcarbodiimide and stimulation of transport by the inculsion of ADP or ATP in the intravesicular space suggest that ATP (or compounds derived from it) is involved in the energization of the transport. The transport activity of intact cells can be recovered without much inactivation in the vesicles, and their high activity and ease of preparation will be useful in studies of the mechanism of the binding protein-dependent transport process.