Alumina/silica supported K2CO3 as a catalyst for biodiesel synthesis from sunflower oil

The new type of catalyst for fatty acid methyl esters (FAME or biodiesel) synthesis with K₂CO₃ as active component on alumina/silica support was synthesized using sol–gel method. Corresponding catalyst (xerogel) was prepared by 12 h drying the wet gel in air at 300 °C, 600 °C or 1000 °C at atmospheric pressure. The catalysts activity in the methanolysis of sunflower oil was compared to the activity of the pure K₂CO₃. The effects of various reaction variables on the yield of FAME were investigated. It was found that the temperature of 120 °C and methanol to oil molar ratio of 15:1, are optimal conditions for FAME synthesis with synthesized catalyst. Repeated use of same amount of catalyst indicated that effect of potassium leaching obviously existed leading to decrease of catalyst activity.     

Biohydrogen production by immobilized Chlorella sp. using cycles of oxygenic photosynthesis and anaerobiosis

Hydrogen production was studied using immobilized green alga Chlorella sp. through a two-stage cyclic process where immobilized cells were first incubated in oxygenic photosynthesis followed by anaerobic incubation for H₂ production in the absence of sulfur. Chlorella sp. used in this study was capable of generating H₂ under immobilized state in agar. The externally added glucose enhanced H₂ production rates and total produced volume while shortened the lag time required for cell adaptation prior to H₂ evolution. The rate of hydrogen evolution was increased as temperature increased, and the maximum evolution rate under 30 mM glucose was 183 mL/h/L and 238 mL/h/L at 37 °C and 40 °C, respectively. In order to continue repeated cycles of H₂ production, at least two days of photosynthesis stage should be allowed for cells to recover H₂ production potential and cell viability before returning to H₂ production stage again.     

Interaction of Na2B12H11SH with dimyristoyl phosphatidylcholine liposomes

Previous investigations have revealed that the boron cluster compound Na₂B₁₂H₁₁SH (BSH) is very potent in causing major structural rearrangements of and leakage from phosphatidylcholine liposomes. This somewhat unexpected finding is interesting from a fundamental point of view and may also constitute the basis of future important pharmaceutical/medical applications of BSH. In order to further explore the BSH-lipid interaction, we have studied the effects caused by BSH on dimyristoyl phosphatidylcholine (DMPC) liposomes.Cryo-transmission electron microscopy showed that BSH induces aggregation, membrane rupture and increasing wall thickness of the liposomes. Differential scanning calorimetry revealed a BSH dependent shift of the gel to liquid crystalline phase transition temperature of DMPC. The zeta potential of the liposomes decreases with increasing BSH concentrations, and an apparent dissociation constant of 0.23 mM was found.BSH caused leakage of liposome-encapsulated carboxyfluorescein; leakage was higher at 23 °C (near the phase transition temperature) than at 15 °C and 37 °C. It induced lipid mixing only at very high concentrations.     

Debilitation in conidia of the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae and implication with respect to viability determinations and mycopesticide quality assessments

Germination of Beauveria bassiana (Bb) and Metarhizium anisopliae (Ma) conidia determined from a fast-rehydration (FR) protocol were compared to those obtained when dry conidia were subjected to slow rehydration (SR) by holding under high humidity conditions prior to aqueous suspension. Differences in viability estimates obtained using the FR vs. SR protocols increased markedly after conidia were exposed to various stress factors in storage (high a_w, temperature, and O₂ concentrations), with the SR protocol producing higher estimates of viability in all cases. After Bb conidia were stored under moist conditions for 21 days at 25 °C, the SR estimate of viability was >21% greater than the FR estimate. In jars flushed with different O₂ concentrations and stored at 50 °C for 34 days, proportional differences between protocols varied, depending on water activity, from 18-44% in jars flushed with 0% O₂ (100% N₂) to as high as 63-93% when treated with 21-22% O₂. For conidia stored over a broad range of moderate to high temperatures in the absence of O₂, SR-FR differences were ?9% at 25-40 °C but 30% at 50 °C. Germination of stressed Bb and Ma conidia increased substantially when incubation time on the germination substrate was increased from 24 to 72 h, whereas germination of non-stressed conidia showed little change. Conidia debilitated by stress were characterized by hypersensitivity to lethal imbibitional damage (damage that is mitigated by slow rehydration) and slow germination. Viability protocols that may provide more reliable assessments of overall mycopesticide quality are discussed.     

Performance of Aspergillus niger B 03 β-xylosidase immobilized on polyamide membrane support

The dynamics of β-xylosidase biosynthesis from Aspergillus niger B 03 was investigated in laboratory bioreactor. Maximum xylosidase activity 5.5 U/ml was achieved after 80 h fermentation at medium pH 4.0. The isolated β-xylosidase was immobilized on polyamide membrane support and the basic characteristics of the immobilized enzyme were determined. Maximum immobilization and activity yield obtained was 30.0 and 6.8%, respectively. A shift in temperature optimum and pH optimum was observed for immobilized β-xylosidase compared to the free enzyme. Immobilized enzyme exhibited maximum activity at 45 °C and pH 4.5 while its free counterpart at 70 °C and pH 3.5, respectively. Thermal stability at 40 and 50 °C and storage stability of immobilized β-xylosidase were investigated at pH 5.0. Kinetic parameters K_m, V_max and K_i were determined for both enzyme forms. Free and immobilized β-xylosidase were tested for xylose production from birchwood xylan. The substrate was preliminarily depolymerized with xylanase to xylooligosaccharides and the amount of xylose obtained after their hydrolysis with free and immobilized β-xylosidase was determined by HPLC analysis. Continuous enzyme hydrolysis of birchwood xylan was performed with xylanase and free or immobilized β-xylosidase. The maximum extent of hydrolysis was 25 and 30% with free and immobilized enzyme, respectively. Immobilized preparation was also examined for reusability in 20 consecutive cycles at 40 °C.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Low molecular weight dextran: Immobilization of cells of Leuconostoc mesenteroides KIBGE HA1 on calcium alginate beads

Dextran is a long chain polymer of d-glucose produced by different bacterial strains including Leuconostoc, Streptococcus and Acetobacter. The bacterial cells from Leuconostoc mesenteroides KIBGE HA1 were immobilized on calcium alginate for dextran production. It was observed that dextran production increases as the temperature increases and after reaching maxima (30 °C) production started to decline. It was also observed that at 50 °C free cells stopped producing dextran, while immobilized cells continued to produce dextran even after 60 °C and still not exhausted. It was found that when 10 g% substrate (sucrose) was used, maximum dextran production was observed. Immobilized cells produced dextran upto 12 days while free cells stopped producing dextran only after 03 days. Molecular mass distribution of dextran produced by immobilized cells is low as compared to free cells.     

High level expression and characterization of a novel thermostable, organic solvent tolerant, 1,3-regioselective lipase from Geobacillus sp. strain ARM

The mature ARM lipase gene was cloned into the pTrcHis expression vector and over-expressed in Escherichia coli TOP10 host. The optimum lipase expression was obtained after 18 h post induction incubation with 1.0 mM IPTG, where the lipase activity was approximately 1623-fold higher than wild type. A rapid, high efficient, one-step purification of the His-tagged recombinant lipase was achieved using immobilized metal affinity chromatography with 63.2% recovery and purification factor of 14.6. The purified lipase was characterized as a high active (7092 U mg⁻¹), serine-hydrolase, thermostable, organic solvent tolerant, 1,3-specific lipase with a molecular weight of about 44 kDa. The enzyme was a monomer with disulfide bond(s) in its structure, but was not a metalloenzyme. ARM lipase was active in a broad range of temperature and pH with optimum lipolytic activity at pH 8.0 and 65 °C. The enzyme retained 50% residual activity at pH 6.0-7.0, 50 °C for more than 150 min.     

Study on the heterogeneous degradation of chitosan with H2O2 catalyzed by a new supermolecular assembly crystal: [C6H8N2]6H3[PW12O40]·2H2O

A new supermolecular assembly crystal, [C₆H₈N₂]₆H₃[PW₁₂O₄₀]·2H₂O (DMB-PWA), was synthesized with phosphotungstic acid (PWA) and 1,2-diaminobenzene (DMB) under hydrothermal conditions and was characterized by Fourier-transform infrared spectra (FTIR) and single-crystal X-ray diffraction analysis. DMB-PWA could effectively catalyze oxidative degradation of chitosan with H₂O₂ in the heterogeneous phase. The optimum degradation conditions were determined by orthogonal tests as follows: amount of chitosan 1.00 g, 30% (wt %); H₂O₂, 3.0 mL; dosage of catalyst, 0.06 g; reaction temperature, 85 °C; and reaction time, 30 min. The water-soluble chitosan with a viscosity-average molecular weight (M_v) of 4900 was obtained under the optimum degradation conditions and was characterized by FTIR, ultraviolet-visible diffuse reflection spectra (UV-vis DRS), and X-ray powder diffraction analysis.     

Comparative reactivity of triorganosilanes, HSi(OEt)3 and HSiEt3, with IrCl(CO)(PPh3)2. Formation of IrCl(H)2(CO)(PPh3)2 or Ir(H)2(SiEt3)(CO)(PPh3)2 depending on the substituents at Si

Reaction of HSi(OEt)₃ with IrCl(CO)(PPh₃)₂ (5:1 molar ratio) at room temperature for 1 h gives IrCl(H){Si(OEt)₃}(CO)(PPh₃)₂ (1), which is observed by the ¹H and ³¹P{¹H} NMR spectra of the reaction mixture. The same reaction, but in 20:1 molar ratio at 50 °C for 24 h produces IrCl(H)₂(CO)(PPh₃)₂ (2) rather than the expected product Ir(H)₂{Si(OEt)₃}(CO)(PPh₃)₂ (3) that was previously reported to be formed by this reaction. Accompanying formation of Si(OEt)₄, (EtO)₃SiOSi(OEt)₃, and (EtO)₂HSiOSi(OEt)₃ is observed. On the other hand, trialkylhydrosilane HSiEt₃ reacts with IrCl(CO)(PPh₃)₂ (10:1 molar ratio) at 80 °C for 84 h to give Ir(H)₂(SiEt₃)(CO)(PPh₃)₂ (4) in a high yield, accompanying with a release of ClSiEt₃.     

Establishment of automated culture system for murine induced pluripotent stem cells

Background

Cost-effective production of industrially important enzymes is a key for their successful exploitation on industrial scale. Keeping in view the extensive industrial applications of lignin peroxidase (LiP), this study was performed to purify and characterize the LiP from an indigenous strain of Trametes versicolor IBL-04. Xerogel matrix enzyme immobilization technique was applied to improve the kinetic and thermo-stability characteristics of LiP to fulfil the requirements of the modern enzyme consumer sector of biotechnology.

Results

A novel LiP was isolated from an indigenous T. versicolor IBL-04 strain. T. versicolor IBL-04 was cultured in solid state fermentation (SSF) medium of corn cobs and maximum LiP activity of 592?±?6 U/mL was recorded after five days of incubation under optimum culture conditions. The crude LiP was 3.3-fold purified with specific activity of 553 U/mg after passing through the DEAE-cellulose and Sephadex-G-100 chromatography columns. The purified LiP exhibited a relatively low molecular weight (30?kDa) homogenous single band on native and SDS-PAGE. The LiP was immobilized by entrapping in xerogel matrix of trimethoxysilane (TMOS) and proplytetramethoxysilane (PTMS) and maximum immobilization efficiency of 88.6% was achieved. The free and immobilized LiPs were characterized and the results showed that the free and immobilized LiPs had optimum pH 6 and 5 while optimum temperatures were 60°C and 80°C, respectively. Immobilization was found to enhance the activity and thermo-stability potential of LiP significantly and immobilized LiP remained stable over broad pH and temperature range as compare to free enzyme. Kinetic constants K _m and V _max were 70 and 56???M and 588 and 417 U/mg for the free and immobilized LiPs, respectively. Activity of this novel extra thermo-stable LiP was stimulated to variable extents by Cu²⁺, Mn²⁺ and Fe²⁺ whereas, Cystein, EDTA and Ag⁺ showed inhibitory effects.

Conclusions

The indigenously isolated white rot fungal strain T. versicolor IBL-04 showed tremendous potential for LiP synthesis in SSF of corncobs in high titters (592 U/mL) than other reported Trametes (Coriolus, Polyporus) species. The results obtained after dual phase characterization suggested xerogel matrix entrapment a promising tool for enzyme immobilization, hyper-activation and stabilization against high temperature and inactivating agents. The pH and temperature optima, extra thermo-stability features and kinetic characteristics of this novel LiP of T. versicolor IBL-04 make it a versatile enzyme for various industrial and biotechnological applications.     

Immobilization of rat erythrocytes for aflatoxicol production

Summary A modified procedure for preparing alginate gel was developed and used to entrap rat erythrocytes. The immobilized erythrocytes showed high enzyme activity for the reduction of aflatoxin B₁ to aflatoxicol. The production of aflatoxicol from aflatoxin B₁ by immobilized erythrocytes was studied for over 3 weeks and the half-life of such a preparation was shown to be about 10 days. The immobilized erythrocytes can be repeatedly used at 37° C for the batch-wise mode of aflatoxicol production without substantial loss of enzyme activity. Haemolysis of immobilized erythrocytes was not observed upon prolonged storage at 4° C. As compared with free erythrocytes, the immobilized erythrocytes were more temperature resistant at 40° C incubation.Part of this work was presented on ROC-Japan Seminar on Applied Microbiology and Enzymology held in Taipei, Republic of China, on March 8, 1984     

Synthesis and characterisation of palladium(II) iodo complexes containing water soluble phosphine ligands. Crystal structures of [PdI2(PTA-H)2][PtI3(PTA)]2 · 2H2O and trans-[PdI2(PTA)2]

The aqueous solution behaviour of the equilibrium related cis-[PdCl₂(PTA)₂] and [PdCl(PTA)₃]Cl complexes has been investigated in the presence of acid and iodide ions. Several of the resulting species were identified and a reaction scheme accounting for identified complexes is proposed. The crystal structures of trans-[PdI₂(PTA-H)₂][PdI₃(PTA)]₂ · 2H₂O (1) (PTA-H⁺ = protonated form of PTA) and trans-[PdI₂(PTA)₂] (2) are reported. The geometry around the Pd(II) metal centre in 1 (for both the cation and anion) and 2 is distorted square planar. The PTA ligands occupy a trans orientation in the cation of 1 and in complex 2. Compound 1 represents a rare example of a Pd(II) system wherein the cation:anion pair, in a 1:2 ratio, are both coordination complexes. It is the first d⁸ Ni-triad square planar complex containing only one PTA ligand and only the second platinum group metal complex. For the cation in 1, the bond distances and angles are Pd(1)-P(1) = 2.2864(16) Å, Pd(1)-I(1) = 2.6216(7) Å, P(1)-Pd(1)-P(1)′ = 180.00(7)° and P(1)-Pd(1)-I(1) = 87.62(4)°, while in the anion the bond distances are Pd(2)-P(2) = 2.2377(15) Å, Pd(2)-I(4) = 2.5961(13) Å, Pd(2)-I(2) = 2.6328(13) Å, Pd(2)-I(3) = 2.6513(8) Å, while the angles are P(2)-Pd(2)-I(4) = 90.00(5)°, P(2)-Pd(2)-I(2) = 89.69(5)°, I(4)-Pd(2)-I(2) = 179.57(2)°, P(2)-Pd(2)-I(3) = 175.19(4)°, I(4)-Pd(2)-I(3) = 90.29(4)° and I(2)-Pd(2)-I(3) = 90.05(4)°. Bond distances and angles of the coordination polyhedron in 2 are Pd-P = 2.327(3) Å, Pd-I = 2.5916(10) Å, P-Pd-I = 89.13(7)° and P-Pd-P = 180.00(13)°. The average effective- and Tolman cone angles for the two ligands, calculated from the crystallographic data, are 115° and 117° for PTA and PTA-H, respectively.     

Continuous production of β-cyclodextrin from starch by highly stable cyclodextrin glycosyltransferase immobilized on chitosan

Cyclodextrin glycosyltransferase (CGTase) from Thermoanaerobacter sp. was covalently immobilized on glutaraldehyde-activated chitosan spheres and used in a packed bed reactor to investigate the continuous production of β-cyclodextrin (β-CD). The optimum temperatures were 75 °C and 85 °C at pH 6.0, respectively for free and immobilized CGTase, and the optimum pH (5.0) was the same for both at 60 °C. In the reactor, the effects of flow rate and substrate concentration in the β-CD production were evaluated. The optimum substrate concentration was 4% (w/v), maximizing the β-CD production (1.32 g/L) in a flow rate of 3 mL/min. In addition, the biocatalyst had good operational stability at 60 °C, maintaining 61% of its initial activity after 100 cycles of batch and 100% after 100 h of continuous use. These results suggest the possibility of using this immobilized biocatalyst in continuous production of CDs.     

Immobilization and stabilization of α-galactosidase on Sepabeads EC-EA and EC-HA

α-Galactosidase from tomato has been immobilized on Sepabead EC-EA and Sepabead EC-HA, which were activated with ethylendiamino and hexamethylenediamino groups, respectively. Two strategy was used for the covalent immobilization of α-galactosidase on the aminated Sepabeads: covalent immobilization of enzyme on glutaraldehyde activated support and cross-linking of the adsorbed enzymes on to the support with glutaraldehyde. By using these two methods, all the immobilized enzymes retained very high activity and the stability of the enzyme was also improved. The obtained results showed that, the most stable immobilized α-galactosidase was obtained with the second strategy. The immobilized enzymes were characterized with respect to free counterpart. Some parameters effecting to the enzyme activity and stability were also analyzed. The optimum temperature and pH were found as 60 °C and pH 5.5 for all immobilized enzymes, respectively. All the immobilized α-galactosidases were more thermostable than the free enzyme at 50 °C. The stabilities of the Sepabead EC-EA and EC-HA adsorbed enzymes treated with glutaraldehyde compared to the stability of the free enzyme were a factor of 6 for Sepabead EC-EA and 5.3 for Sepabead EC-HA. Both the free and immobilized enzymes were very stable between pH 3.0 and 6.0 and more than 85% of the initial activities were recovered. Under the identical storage conditions the free enzyme lost its initial activity more quickly than the immobilized enzymes at the same period of time. The immobilized α-galactosidase seems to fulfill the requirements for different industrial applications.     

Evidence for H2O2 as the product of reduction of oxygen by alternative oxidase in mitochondria from potato tubers

Oxygen consumption by alternative oxidase (AOX), present in mitochondria of many angiosperms, is known to be cyanide-resistant in contrast to cytochrome oxidase. Its activity in potato tuber (Solanum tuberosum L.) was induced following chilling treatment at 4 °C. About half of the total O₂ consumption of succinate oxidation in such mitochondria was found to be sensitive to SHAM, a known inhibitor of AOX activity. Addition of catalase to the reaction mixture of AOX during the reaction decreased the rate of SHAM-sensitive oxygen consumption by nearly half, and addition at the end of the reaction released nearly half of the consumed oxygen by AOX, both typical of catalase action on H₂O₂. These findings with catalase suggest that the product of reduction of AOX is H₂O₂ and not H₂O, as previously surmised. In potatoes subjected to chill stress (4 °C) for periods of 3, 5 and ?8 days the activity of AOX in mitochondria increased progressively with a corresponding increase in the AOX protein detected by immunoblot of the protein.     

A novel hepatopancreatic phospholipase A2 from Hexaplex trunculus with digestive and toxic activities

A marine snail digestive phospholipase A₂ (mSDPL) was purified from delipidated hepatopancreas. Unlike known digestive phospholipases A₂, which are 14 kDa proteins, the purified mSDPL has a molecular mass of about 30 kDa. It has a specific activity of about 180 U/mg measured at 50 °C and pH 8.5 using phosphatidylcholine liposomes as a substrate in the presence of 4 mM NaTDC and 6 mM CaCl₂. The N-terminal amino-acid of the purified mSDPL does not share any homology with known phospholipases.Moreover, the mSDPL exhibits hemolytic activity in intact erythrocytes and can penetrate phospholipid monolayers at high surface pressure, comparable to snake venom PLA₂. These observations suggest that mSDPL could be toxic to mammal cells. However, mSDPL can be classified as a member of a new family of enzymes. It should be situated between the class of toxic phospholipase A₂ from venoms and another class of non toxic pancreatic phospholipase A₂ from mammals.     

Factors affecting emulsion stability and quality of oil recovered from enzyme-assisted aqueous extraction of soybeans

The objectives of the present study were to assess how the stability of the emulsion recovered from aqueous extraction processing of soybeans was affected by characteristics of the starting material and extraction and demulsification conditions. Adding endopeptidase Protex 6L during enzyme-assisted aqueous extraction processing (EAEP) of extruded soybean flakes was vital to obtaining emulsions that were easily demulsified with enzymes. Adding salt (up to 1.5 mM NaCl or MgCl₂) during extraction and storing extruded flakes before extraction at 4 and 30 °C for up to 3 months did not affect the stabilities of emulsions recovered from EAEP of soy flour, flakes and extruded flakes. After demulsification, highest free oil yield was obtained with EAEP of extruded flakes, followed by flour and then flakes. The same protease used for the extraction step was used to demulsify the EAEP cream emulsion from extruded full-fat soy flakes at concentrations ranging from 0.03% to 2.50% w/w, incubation times ranging from 2 to 90 min, and temperatures of 25, 50 or 65 °C. Highest free oil recoveries were achieved at high enzyme concentrations, mild temperatures, and short incubation times. Both the nature of enzyme (i.e., protease and phospholipase), added alone or as a cocktail, concentration of enzymes (0.5% vs. 2.5%) and incubation time (1 vs. 3 h), use during the extraction step, and nature of enzyme added for demulsifying affected free oil yield. The free oil recovered from EAEP of extruded flakes contained less phosphorus compared with conventional hexane-extracted oil. The present study identified conditions rendering the emulsion less stable, which is critical to increasing free oil yield recovered during EAEP of soybeans, an environmentally friendly alternative processing method to hexane extraction.     

Isolation of a thermostable variant of Lip2 lipase from Yarrowia lipolytica by directed evolution and deeper insight into the denaturation mechanisms involved

Lip2 lipase from Yarrowia lipolytica is a very promising lipase with many potential applications (e.g. resolution of racemic mixtures, production of fine chemicals). Unfortunately this potential is impeded by a very low thermostability for temperatures higher than 40 °C. Error-prone PCR and screening of the library in a high-performance yeast expression system (Y. lipolytica) enabled a thermostable variant to be identified. This variant presents only one mutation, the free cysteine 244 is changed into an alanine. At 60 °C, the half-life time of the purified variant was 127-fold increased compared to the WT enzyme (from 1.5 min to 3 h). Saturation mutagenesis experiment at position 244 demonstrated that the presence of a cysteine at this position was responsible for the thermal denaturation. It was demonstrated that WT Lip2 and the thermostable variant are both inactivated through aggregation mechanisms, but that the kinetics and the nature of the aggregation were different. For the WT enzyme, rapid intermolecular disulphide bridge interchanges triggered by the free cysteine 244 mediates aggregation. For the variant C244A, aggregation still occurred but much slower than for the WT lipase and was mainly driven by hydrophobic forces.