Optimisation of exopolysaccharide production by Gomphidius rutilus and its antioxidant activities in vitro

The production conditions of the Gomphidius rutilus exopolysaccharides (GREP) in submerged culture were optimised, and the antioxidant activities of GREP in vitro were evaluated. The optimal culture medium constituents were determined as follows: 30 g/L sucrose, 3.0 g/L soybean meal, 0.25 g/L MgSO₄, 1.5 g/L K₂HPO₄, 0.5 g/L KH₂PO₄, 0.03 g/L ZnSO₄, and 0.01 g/L FeSO₄. The optimum parameters for the liquid fermentation were as follows: temperature, 25 °C; cultivation time, 6 d; initial pH, 8.0; volume of medium, 150 mL; and rotary speed, 180 rpm. GREP content and dry cell weight in optimised conditions were 540.1 ± 15.9 mg/L and 8.2 ± 0.3 g/L, respectively. GREP content under the optimised conditions was 2.5 times than that under the basic culture medium and initial conditions. GREP demonstrated positive antioxidant potential on superoxide anion radical, 1,1-diphenyl-2-picrylhydrazyl, and hydroxyl radical scavenging, and reducing power.     

Composition of extracellular polymeric substances influences the autoaggregation capability of hydrogen-producing bacterium Ethanoligenens harbinense

Non-spore-forming Ethanoligenens, a novel genus of hydrogen-producing bacteria, is endowed with great application potential in biohydrogen production due to acidophilic and autoaggregating growth. In order to elucidate the mechanism of autoaggregation of Ethanoligenens harbinense, extracellular polymeric substances (EPS) from YUAN-3 had been extracted and analyzed. The EPS was mainly produced during the exponential phase and with protein, carbohydrate and DNA as its main components, with yields of 21.0 ± 0.8 mg/g-cell dry weight (CDW), 16.9 ± 0.8 mg/g-CDW and 3.5 ± 0.5 mg/g-CDW, respectively. Compared with the EPS composition of semi-autoaggregating hydrogen-producing bacteria W1 and non-autoaggregating hydrogen-producing bacteria B49, carbohydrate and protein played an important part in the autoaggregation of YUAN-3.     

Production of extracellular polysaccharide by Bacillus megaterium RB-05 using jute as substrate

Bacillus megaterium RB-05 was grown on glucose and on “tossa-daisee” (Corchorus olitorius)-derived jute, and production and composition of extracellular polysaccharide (EPS) were monitored. An EPS yield of 0.065 ± 0.013 and of 0.297 g ± 0.054 g⁻¹ substrate after 72 h was obtained for glucose and jute, respectively. EPS production in the presence of jute paralleled bacterial cellulase activity. High performance liquid chromatography (HPLC), matrix assisted LASER desorption/ionization-time of flight (MALDI-ToF) mass spectroscopy, and fourier transform infrared (FT-IR) spectroscopy demonstrated that the EPS synthesized in jute culture (JC) differed from that synthesized in glucose mineral salts medium (GMSM). While fucose was only a minor constituent (4.9 wt.%) of EPS from GMSM, it a major component (41.9 wt.%) of EPS synthesized in JC. This study establishes jute as an effective fermentation substrate for EPS production by a cellulase-producing bacterium.     

Continuous culture of the microalgae Schizochytrium limacinum on biodiesel-derived crude glycerol for producing docosahexaenoic acid

Crude glycerol is a major byproduct of the biodiesel industry; previous research has proved the feasibility of producing docosahexaenoic acid (DHA, 22:6 n − 3) through fermentation of the algae Schizochytrium limacinum on crude glycerol. The objective of this work is to investigate the cell growth kinetics, substrate utilization efficiency, and DHA production of the algae through a continuous culture. Steady-state biomass yield, biomass productivity, growth yield on glycerol, specific glycerol consumption rate, and fatty acid composition were investigated within the range of dilution rate (D) from 0.2 to 0.6 day⁻¹, and the range of feed crude glycerol concentration (S₀) from 15 to 120 g/L. The maximum specific growth rate was determined as 0.692 day⁻¹. The cells had a true growth yield of 0.283 g/g but with a relatively high maintenance coefficient (0.2216 day⁻¹). The highest biomass productivity of 3.88 g/L-day was obtained at D = 0.3 day⁻¹ and S₀ = 60 g/L, while the highest DHA productivity (0.52 g/L-day) was obtained at D = 0.3 day⁻¹ and S₀ = 90 g/L due to the higher DHA content at S₀ = 90 g/L. The biomass and DHA productivity of the continuous culture was comparable to those of batch culture, while lower than the fed-batch culture, mainly because of the lower DHA content obtained by the continuous culture. Overall, the results show that continuous culture is a powerful tool to investigate the cell growth kinetics and physiological behaviors of the algae growing on biodiesel-derived crude glycerol.     

Nutritional value of the cryptophyte Rhodomonas lens for Artemia sp.

Juvenile or adult Artemia sp. are often used as live prey for the rearing of early life stages of some crustacean, fish and cephalopod species. The improvements of both Artemia growth and its biochemical composition are key issues for the suitable use of Artemia biomass in these rearing processes. In this study we evaluated the growth and survival rates of Artemia fed with the cryptophyte Rhodomonas lens in comparison with different microalgal species commonly used in aquaculture: the prasinophyte Tetraselmis suecica, the prymnesiophyte Isochrysis galbana Parke, and the eustigmatophyte Nannochloropsis gaditana. Microalgae were cultured semi-continuously in nutrient saturated conditions and with a daily renewal rate of 30% of the volume of cultures, to obtain biomass of controlled and optimized composition. Considerable differences in Artemia growth were observed, as well as in the survival rate. At day 8 of rearing, Artemia fed R. lens had the highest length (4.9 ±0.6 mm, P < 0.001), followed by individuals fed T. suecica (4.2 ± 0.7 mm), I. galbana (3.6 ± 0.7 mm) and finally those fed N. gaditana (1.5 ± 0.2 mm). The survival rate of Artemia fed N. gaditana (18 ± 3%) was much lower (P < 0.001) than values found for the remaining groups (69 to 88%). The growth rate of Artemia obtained with R. lens was in general much higher than with other microalgal diets previously reported in the literature. The higher protein content of R. lens could explain the higher growth obtained with this species, but differences of Artemia growth with the different diets could not be explained solely on the basis of the gross composition of microalgae. Factors such as cell size and digestibility all seem to contribute to the results observed. Another trial was carried out to investigate differences in Artemia growth and on its biochemical composition when fed the best two diets: R. lens or T. suecica. The fatty acid (FA) and total amino acid (AA) composition of both microalgal species and the composition of Artemia were assessed as well. As found in the first experiment individuals fed R. lens (group ARHO) grew faster than those fed T. suecica (group ATET), attaining 3.6 ± 0.3 mm and 3.2 ± 0.4 mm (P < 0.001), respectively, after 5 days of rearing. The much higher AA content obtained in R. lens may be on the basis of the higher growth obtained with this species. Protein and carbohydrate levels in Artemia juveniles were very similar in both groups (64-68% of dry weight, and 8-10%, respectively). Lipid was slightly lower in ARHO (12%) than in ATET (15%, P < 0.01). Regarding the FA composition, juveniles from group ARHO contained higher levels of eicosapentaenoic acid (EPA, 6.2%) than juveniles from ATET (4.1%, P < 0.01), whereas docosahexaenoic acid (DHA) was only found in juveniles from ARHO (1.1%). Taking into account that the daily productivity of R. lens culture was higher than, or at least equal, the remaining microalgal species this cryptophyte is confirmed as an excellent diet to optimize the growth of Artemia, as well as to improve its biochemical composition.     

Growth and annual production of the brown alga Laminaria japonica (Phaeophyta, Laminariales) introduced into the Uwa Sea in southern Japan

The brown alga Laminaria japonica is distributed from southern Hokkaido to the northeastern Honshu in Japan. Recently, aquaculture of L. japonica has expanded to the southern coast of Japan and to China along the East China Sea. In order to elucidate the growth, biomass and productivity of L. japonica in a subtropical area, we cultivated and examined it in the Uwa Sea, in southwestern Japan over a period of 2 years. The seawater temperature ranged from 13.8 to 26.8 °C in 2001/2002 and from 13.1 to 27.2 °C in 2002/2003. In 2001/2002, the maximum density, maximum mean length and maximum mean wet wt. of L. japonica were 59.7 ± 28.0 ind. 50 cm^− 1 (mean ± S.D.), 187.5 ± 82.7 cm (360 cm in the largest individual) and 130.1 ± 94.6 g wet wt., respectively. In 2002/2003, these values were 94.7 ± 22.2 ind. 50 cm^− 1, 159.3 ± 74.4 cm (300 cm in the largest individual) and 95.2 ± 69.5 g wet wt., respectively. Thus, the length and weight increased when the density was low (2001/2002), and the length and weight decreased when the density was high (2002/2003). The maximum biomass was estimated to be 7200 ± 3400 g wet wt. 50 cm^− 1 in 2001/2002 and 7300 ± 2000 g wet wt. 50 cm^− 1 in 2002/2003. Annual production was estimated to be 33.3 kg wet wt. m^− 1 year^− 1 in 2001/2002 and 34.0 kg wet wt. m^− 1 year^− 1 in 2002/2003. The present study indicates that the annual production of L. japonica per rope of 1 m at Uwajima Bay, the Uwa Sea corresponded to 1.1-2.2 m² of that of Hokkaido in their native area. Thus, the present study indicates that L. japonica is highly adaptable because it is able to keep a high level of productivity when grown in water with a high temperature.     

Simultaneous production of citric acid and invertase by Yarrowia lipolytica SUC+ transformants

Simultaneous production of citric acid (CA) and invertase by Yarrowia lipolytica A-101-B56-5 (SUC⁺ clone) growing from sucrose, mixture of glucose and fructose, glucose or glycerol was investigated. Among the tested substrates the highest concentration of CA was reached from glycerol (57.15 g/L) with high yield (Y_CA/S = 0.6 g/g). When sucrose was used, comparable amount of CA was secreted (45 g/L) with slightly higher yield (Y_CA/S = 0.643 g/g). In all cultures amount of isocitrate (ICA) was below 2% of total citrates. Considering invertase production, the best carbon source appeared to be sucrose (72 380 U/L). The highest yield of CA and invertase biosynthesis calculated for 1 g of biomass was obtained for cells growing from glycerol (9.9 g/g and 4325 U/g, respectively). Concentrates of extra- and intracellular invertase of the highest activity were obtained from sucrose as substrate (0.5 and 1.8 × 10⁶ U/L, respectively).     

Evaporative water loss and energy metabolic in two small mammals,voles (Eothenomys miletus) and mice (Apodemus chevrieri), in Hengduan mountains region

Evaporative water loss (EWL) and energy metabolism were measured at different temperatures in Eothenomys miletus and Apodemus chevrieri in dry air. The thermal neutral zone (TNZ) of E. miletus was 22.5–30 °C and that of A. chevrieri was 20–27.5 °C. Mean body temperatures of the two species were 35.75±0.5 and 36.54±0.61 °C. Basal metabolic rates (BMR) were 1.92±0.17 and 2.7±0.5 ml O₂/g h, respectively. Average minimum thermal conductance (C_m) were 0.23±0.08 and 0.25±0.06 ml O₂/g h °C. EWL in E. miletus and A. chevrieri increased with the increase in temperature; the maximal EWL at 35 °C was 4.78±0.6 mg H₂O/g h in E. miletus, and 5.92±0.43 mg H₂O/g h in A. chevrieri. Percentage of evaporative heat loss to total heat production (EHL/HP) increased with the increase in temperature; the maximal EHL/HP was 22.45% at 30 °C in E. miletus, and in A. chevrieri it was 19.96% at 27.5 °C. The results may reflect features of small rodents in the Hengduan mountains region: both E. miletus and A. chevrieri have high levels of BMR and high levels of total thermal conductance, compared with the predicted values based on their body masses, while their body temperatures are relatively low. EWL plays an important role in temperature regulation.     

Colonization of Aspergillus japonicus on synthetic materials and application to the production of fructooligosaccharides

The ability of Aspergillus japonicus ATCC 20236 to colonize different synthetic materials (polyurethane foam, stainless steel sponge, vegetal fiber, pumice stones, zeolites, and foam glass) and to produce fructooligosaccharides (FOS) from sucrose (165 g/L) is described. Cells were immobilized in situ by absorption, through direct contact with the carrier particles at the beginning of fermentation. Vegetal fiber was the best immobilization carrier as A. japonicus grew well on it (1.25 g/g carrier), producing 116.3 g/L FOS (56.3 g/L 1-kestose, 46.9 g/L 1-nystose, and 13.1 g/L 1-β-fructofuranosyl nystose) with 69% yield (78% based only in the consumed sucrose amount), giving also elevated activity of the β-fructofuranosidase enzyme (42.9 U/mL). In addition, no loss of material integrity, over a 2 day-period, was found. The fungus also immobilized well on stainless steel sponge (1.13 g/g carrier), but in lesser extents on polyurethane foam, zeolites, and pumice stones (0.48, 0.19, and 0.13 g/g carrier, respectively), while on foam glass no cell adhesion was observed. When compared with the FOS and β-fructofuranosidase production by free A. japonicus, the results achieved using cells immobilized on vegetal fiber were closely similar. It was thus concluded that A. japonicus immobilized on vegetal fiber is a potential alternative for high production of FOS at industrial scale.     

Optimization of exopolysaccharide welan gum production by Alcaligenes sp. CGMCC2428 with Tween-40 using response surface methodology

The effect of additives on welan gum production produced by fermentation with Alcaligenes sp. CGMCC2428 was studied. Tween-40 was the best additive for improving welan gum production and welan gum displayed better rheological properties than that obtained by control fermentation without additives. Response surface methodology was employed to optimize the culture conditions for welan gum production in the shake flask culture, including Tween-40 concentration, pH and culture temperature. The optimal conditions were determined as follows: Tween-40 concentration 0.94 g/l, pH 6.9 and temperature 29.6 °C. The corresponding experimental concentration of welan gum was 23.62 ± 0.60 g/l, which was agreed closely with the predicted value (23.48 g/l). Validation experiments were also carried out to prove the adequacy and the accuracy of the model obtained. The welan gum fermentation in a 7.5 l bioreactor reached 24.90 ± 0.68 g/l.     

High-level expression of glutaryl-7-aminocephalosporanic acid acylase from Pseudomonas diminuta NK703 in Escherichia coli by combined optimization strategies

In this work, a glutaryl-7-aminocephalosporanic acid acylase (GLA) coding gene was cloned from Pseudomonas diminuta NK703 which was screened from oilfield. The concerted effects of the expression system, inducing condition and culture medium on the expression of NK703 GLA in E. coli were firstly investigated. The best combination was the recombinant E. coli strain of pET-28a + GLA/BL21(DE3) with 2.0% (w/v) lactose inducing in YT medium at 25 °C. Then, by optimizing the components of culture medium, a synthetic medium with dextrin and a feeding medium with glycerol as the carbon sources were developed to further enhance the GLA yield and improve the GLA solubility. In the end, the NK703 GLA activity increased about 50-fold, reached 14,470 ± 465 U/L, and the GLA productivity and the proportion of soluble GLA to the total soluble protein attained 206.0 ± 9.033 U L⁻¹ h⁻¹ and 60.13%, respectively. Scaling up the GLA production in 3.7 L fermenter under the optimized conditions identified in shake flask, the GLA activity also reached 12,406 ± 521 U/L, which was the highest report at fermenter level.     

Hydrocarbon degradation and bioemulsifier production by thermophilic Geobacillus pallidus strains

Geobacillus pallidus XS2 and XS3 were isolated from oil contaminated soil samples in Yumen oilfield, China, and were able to produce bioemulsifiers on different hydrocarbons. Biodegradation assays exhibited that approximately 70% of PAH (250 mg/L) or 85% of crude oil (500 mg/L) was removed by the thermophilic bacteria after 20 days. The bioemulsifiers of the two strains were isolated and obtained a productive yield of 4.24 ± 0.08 and 3.82 ± 0.11 g/L, respectively. GPC analysis revealed that the number-average molecular weights (M_n) of the two bioemulsifiers were 271,785 Da and 526,369 Da, with PDI values of 1.104 and 1.027, respectively. Chemical composition studies exhibited that the bioemulsifier XS2 consisted of carbohydrates (68.6%), lipids (22.7%) and proteins (8.7%) while the bioemulsifier XS3 was composed by carbohydrates (41.1%), lipids (47.6%) and proteins (11.3%). Emulsification assays approved the effectiveness of bioemulsifiers over a wide range of temperature, pH and salinity.     

Quantitative analysis for the effect of plant oil and fatty acid on Tuber melanosporum culture by uniform design combined with partial least squares regression

Uniform design and partial least squares regression were adopted to quantitatively analyze the effects of plant oil and fatty acid as well as their addition amount and addition time on the performance of Tuber melanosporum submerged fermentation. The regression models showed the optimal scheme was the addition of 1.2 mL soybean oil on day 9, which was validated by experiment. The maximal biomass of 25.89 ± 1.01 g/L and extracellular polysaccharides (EPS) production of 6.51 ± 0.68 g/L were obtained, which were enhanced by 18.5% and 86%, respectively. Palmitic acid was identified to be the key component to stimulate the cell growth and EPS biosynthesis, and stearic acid was beneficial for the production of intracellular polysaccharides. Not only the biomass but also EPS production obtained in this work are the highest reported in the batch fermentation of truffle.     

Differential responses of the floating-leaved aquatic plant Nymphoides peltata to gradual versus rapid increases in water levels

We compared the growth responses of the floating-leaved species Nymphoides peltata to gradual and rapid rising water levels under two nutrient concentrations (1 g and 12 g of slow released fertilizer (N-P-K: 16-8-12) per container filled with 8 kg washed sand), and predicted the population expansion after these floods. The results showed that the capacity for petiole elongation was dependent on leaf age, and only leaves that were no more than five days old had the capability to reach the water surface when the water level increased rapidly from 50 cm to 300 cm. Plants subjected to a gradual rising water level tracked the increase in water depth whose petioles elongated at 3.96 ± 1.70 cm per day and 4.80 ± 0.16 cm per day under low and high nutrient concentrations respectively throughout the experiment period. When water levels were rapidly raised, leaf petioles elongated rapidly at 25.48 ± 1.51 cm per day and 26.64 ± 2.24 cm per day under low and high nutrient concentrations respectively during the first ten days. Plants under a constant water level maintained highest mean leaf recruitment (mean 3.0 ± 0.33 leaves and 24.4 ± 5.87 leaves every ten days under low and high nutrient concentrations, respectively). Therefore, more young leaves existed in the canopy ensuring that when the water level increases, young leaves can rapidly emerge after submergence. Gradual water level rise did not significantly affect biomass and ramet production (4.75 ± 1.41 g and 5.50 ± 1.22 ramets in low nutrient; 48.49 ± 21.45 g and 35.67 ± 11.78 ramets in high nutrient), but rapid water level rise negatively affected ramet production in both nutrient concentrations (3.00 ± 1.26 ramets and 11.25 ± 4.19 ramets in low and high nutrients, respectively). The results indicated that continual leaf recruitment and rapid petiole elongation were both important ways in which N. peltata adapted to increasing water levels. Extreme flooding may be a disturbance factor that affects plant growth and the population expansion of N. peltata, while small gradual water level rise should not harm this species.     

Optimization of culture conditions for production of yeast biomass using bamboo wastewater by response surface methodology

Response surface methodology (RSM) was applied to optimize culture conditions for the growth of Candida utilis with bamboo wastewater. A significant influence of initial pH, fermentation time and yeast extract on biomass of C. utilis was evaluated by Plackett–Burman design (PBD). These factors were further optimized using a central composite design (CCD) and RSM. A combination of initial pH 6.1, fermentation time 69 h and yeast extract 1.17 g/L was optimum for maximum biomass of C. utilis. A 1.7-fold enhancement of biomass of C. utilis was gained after optimization in shake-flask cultivation. The biomass of C. utilis reached 19.17 g/L in 3 L fermentor.     

Cryopreservation of sperm of an indigenous endangered fish species Nandus nandus (Hamilton, 1822) for ex-situ conservation

This study dealt with the development of cryopreservation protocol for Nandus nandus, which entailed a number of experiments. Sperm was collected by sacrificing males. The collected sperm was suspended in extenders. Activation of sperm motility was evaluated in different osmolalities of NaCl. Motility of sperm decreased as the osmolality of the extender increased and was completely inhibited at almost 319 mOsmol/kg. To evaluate the toxicity of cryoprotectant, sperm was incubated with DMSO, methanol and ethanol at 5%, 10% and 15% concentrations, respectively, for 5–35 min. Five and ten percent of cryoprotectants produced better motility during 5 and 10 min incubation. Sperm incubated with 15% cryoprotectant seemed to be toxic and this concentration was excluded in the subsequent trials. Three extenders, namely, Alsever’s solution, egg-yolk citrate and urea egg-yolk and three cryoprotectants, DMSO, methanol and ethanol were employed to preserve the sperm. Alsever’s solution with 10% DMSO showed best performance producing 90.0 ± 1.8% and 75.0 ± 2.5% equilibration and post-thaw motility followed by that of 82.5 ± 4.2% and 62.5 ± 5.5% with Alsever’s solution plus methanol, respectively. Between two diluents, sperm preserved with Alsever’s solution plus DMSO produced highest fertilization (76.7 ± 3.3%) and hatching (43.8 ± 7.9%) while fresh sperm yielded 83.3 ± 6.7% and 64.0 ± 10.4% fertilization and hatching, respectively. The protocol developed through the study can be applied for long-term conservation of genetic materials of the endangered fish N. nandus and the cryopreserved sperm can be used in artificial breeding for generating new individuals.     

Continuous hydrogen and butyric acid fermentation by immobilized Clostridium tyrobutyricum ATCC 25755: Effects of the glucose concentration and hydraulic retention time

The effects of the hydraulic retention time (HRT = 8, 10, 12 or 16.7 h) and glucose concentration (30, 40 or 50 g/L) on the production of hydrogen and butyrate by an immobilized Clostridium tyrobutyricum culture, grown under continuous culturing conditions, were evaluated. With 30 g/L glucose, the higher HRTs tested led to greater butyrate concentrations in the culture, i.e., 9.3 g/L versus 12.9 g/L with HRTs of 8 h and 16.7 h, respectively. In contrast, higher biogas and hydrogen production rates were generally seen when the HRT was lower. Experiments with different glucose concentrations saw a significant amount of glucose washed out when 50 g/L was used, the highest being 22.7 g/L when the HRT was 16.7 h. This study found the best conditions for the continuous production of hydrogen and butyric acid by C. tyrobutyricum to be with an HRT of 12 h and a glucose concentration of 50 g/L, respectively.     

Effects of CO2 concentration on growth of filamentous algae and Littorella uniflora in a Danish softwater lake

An experiment was conducted from May to November in Lake Hampen, Denmark, to study the effect of higher CO₂ concentration on the biomass of filamentous algae. Three enclosures (1.5 m diameter) were enriched with free CO₂ to ∼10 times atmospheric equilibrium (∼170 μM) and three enclosures were kept at atmospheric equilibrium (∼17 μM). The isoetid Littorella uniflora dominated the vegetation in the enclosures. Low concentrations of nitrate and phosphate in the water were observed, especially in the summer months. During the summer, a high biomass of filamentous algae (dominated by Zygnema sp.) developed in both types of enclosures (18–58 g dry wt. m⁻² in July and August), but the biomass of algae was significantly higher (1.9–38 times) in the CO₂ enriched enclosures than in enclosures with low CO₂ concentration. L. uniflora biomass, especially leaf biomass, also showed a significant positive response to increased CO₂ concentration (75.0 ± 10.4 and 133.3 ± 42.5 g dry wt. m⁻² at low and high CO₂ concentrations, respectively) even though the massive filamentous algal growth decreased the light intensity. Both filamentous algae (in August) and L. uniflora showed lower tissue concentrations of N and P at high CO₂ concentration.     

Removal and recovery of uranium from aqueous solutions by Ca-alginate immobilized Trichoderma harzianum

The ability of Ca-alginate immobilized Trichoderma harzianum has been explored for removal and recovery of uranium from aqueous streams. Ca-alginate as polymeric support was selected after screening different matrices. Immobilization of Trichoderma harzianum to Ca-alginate improved the stability as well as uranium biosorption capacity of biosorbent at 28 ± 2 °C and 200 rpm. The suitability of packed bed column operations was illustrated by obtaining break through curves at different bed heights, flow rates and inlet uranium concentrations. The adsorption column containing 1.5 g dry weight of immobilized material has purified 8.5 L of bacterial leach liquor (58 mg/L U) before break through occurred and the biosorbent became saturated after 25 L of influent. Sorbed uranium was recovered in 200 ml of 0.1 N HCl resulting in 98.1–99.3% elution by 0.1 N HCl, which regenerated the biosorbent facilitating the sorption–desorption cycles for better economic feasibility without any significant alteration in sorption capacity/elution efficiency.     

Induced production of chitinase to enhance entomotoxicity of Bacillus thuringiensis employing starch industry wastewater as a substrate

Induced production of chitinase during bioconversion of starch industry wastewater (SIW) to Bacillus thuringiensis var. kurstaki HD-1 (Btk) based biopesticides was studied in shake flask as well as in computer-controlled fermentors. SIW was fortified with different concentrations (0%; 0.05%; 0.1%; 0.2%; 0.3% w/v) of colloidal chitin and its consequences were ascertained in terms of Btk growth (total cell count and viable spore count), chitinase, protease and amylase activities and entomotoxicity. At optimum concentration of 0.2% w/v colloidal chitin, the entomotoxicity of fermented broth and suspended pellet was enhanced from 12.4 × 10⁹ (without chitin) to 14.4 × 10⁹ SBU/L and from 18.2 × 10⁹ (without chitin) to 25.1 × 10⁹ SBU/L, respectively. Further, experiments were conducted for Btk growth in a computer-controlled 15 L bioreactor using SIW as a raw material with (0.2% w/v chitin, to induce chitinase) and without fortification of colloidal chitin. It was found that the total cell count, spore count, delta-endotoxin concentration (alkaline solubilised insecticidal crystal proteins), amylase and protease activities were reduced whereas the entomotoxicity and chitinase activity was increased with chitin fortification. The chitinase activity attained a maximum value at 24 h (15 mU/ml) and entomotoxicity of suspended pellet reached highest (26.7 × 10⁹ SBU/L) at 36 h of fermentation with chitin supplementation of SIW. In control (without chitin), the highest value of entomotoxicity of suspended pellet (20.5 × 10⁹ SBU/L) reached at 48 h of fermentation. A quantitative synergistic action of delta-endotoxin concentration, spore concentration and chitinase activity on the entomotoxicity against spruce budworm larvae was observed.