3-Phenyllactic acid production by substrate feeding and pH-control in fed-batch fermentation of Lactobacillus sp. SK007

3-Phenyllactic acid (PLA), which is produced by some strains of lactic acid bacteria (LAB), is a known antimicrobial agent with a broad spectrum. Batch and fed-batch fermentation by the strain Lactobacillus sp. SK007 for PLA production have been reported. With batch fermentation without pH-control, PLA production yield was 2.42 g L⁻¹. When fed-batch fermentation by Lactobacillus sp. SK007 was conducted in 3 L initial volume with pH-control at 6.0 and intermittent feeding, which was developed after fermentation for 12 h and every 2 h with 120 mL 100 g L⁻¹ PPA phenylpyruvic acid (PPA) and 50 mL 500 g L⁻¹ glucose each time, PLA production yield reached 17.38 g L⁻¹. The final conversion ratio of PPA to PLA was 51.1%, and the PLA production rate was 0.241 g L⁻¹ h⁻¹. This indicated that PPA was the ideal substrate for PLA fermentation production, and fed-batch fermentation with intermittent PPA feeding and pH-control was an effective approach to improve PLA production yield.     

Biodegradability of injection molded bioplastic pots containing polylactic acid and poultry feather fiber

The biodegradability of three types of bioplastic pots was evaluated by measuring carbon dioxide produced from lab-scale compost reactors containing mixtures of pot fragments and compost inoculum held at 58 °C for 60 days. Biodegradability of pot type A (composed of 100% polylactic acid (PLA)) was very low (13 ± 3%) compared to literature values for other PLA materials. Near infrared spectroscopy (NIRS) results suggest that the PLA undergoes chemical structural changes during polymer extrusion and injection molding. These changes may be the basis of the low biodegradability value. Biodegradability of pot types B (containing 5% poultry feather, 80% PLA, 15% starch), and C (containing 50% poultry feather, 25% urea, 25% glycerol), were 53 ± 2% and 39 ± 3%, respectively. More than 85% of the total biodegradation of these bioplastics occurred within 38 days. NIRS results revealed that poultry feather was not degraded during composting.     

The effect of organic loading rate on foam initiation during mesophilic anaerobic digestion of municipal wastewater sludge

The impact of increasing organic load on anaerobic digestion foaming was studied at both full and bench scale. Organic loadings of 1.25, 2.5 and 5 kg VS m⁻³ were applied to bench-scale digesters. Foaming was monitored at a full scale digester operated in a comparable organic loading range over 15 months. The bench scale batch studies identified 2.5 kg VS m⁻³ as a critical threshold for foam initiation while 5 kg VS m⁻³ resulted in persistent foaming. Investigation of a full scale foaming event corroborated the laboratory observation that foaming may be initiated at a loading rate of ?2.5 kg VS m⁻³. Experimental findings on foam composition and differences in the quality characteristics between foaming and non-foaming sludges indicated that foam initiation derived from the combined effect of the liquid and gas phases inside a digester and that the solids/biomass ultimately stabilized foaming.     

Extraction,characterization and spontaneous emulsifying properties of pectin from sugar beet pulp

The effects of organic acid extractants on the yield and characteristics of pectin from sugar beet pulp were investigated with citric acid, malic acid and lactic acid at different pH (1.5 and 2.0) and time (1 h and 2 h). The results demonstrated that the yields of pectins were directly correlated with the decrease of pH and reaction time, and the optimum yield of 17.2% was obtained at pH 1.5 and 2 h. Furthermore, the acid type also affected the physicochemical characteristics of pectin, especially on the esterification degree (42–71), galacturonic acid content (60.2–77.8%), emulsion activity (35.2–40.1%) and emulsion stability (62.1–79.4%), and a relatively single pectin mainly consisted of homogalacturonan could be obtained under a suitable reaction condition, which was an excellent crude material for the production of emulsion activity.     

Nitrogen removal from wastewater in vertical flow constructed wetlands containing LWA/gravel layers and reed vegetation

The influence of light weight aggregates made of fly ash from sewage sludge thermal treatment (FASSTT LWA) on the nitrogen removal efficiency from artificial wastewater in constructed wetlands (CW) with vertical flow reed bed was investigated. Thirty lysimeters with six different double-layer bed constructions (upper layer of FASSTT LWA with thicknesses of: 0 cm, 12 cm, 25 cm, 50 cm, and 100 cm of the total depth of the lysimeter, above a lower gravel layer), either with or without reed plants were operated with wastewater hydraulic loading rate of 4.67 mm/d. During a six-month experiment, high efficiency of ammonia removal was observed. The influence of FASSTT LWA as a bed material and the presence of reed on CW treatment efficiency was determined. The highest total nitrogen removal efficiency, 59.5%, was obtained in the CW with double-layer lysimeters consisting of 25% FASSTT LWA (upper layer), and 75% gravel (lower layer), and planted with reed.     

The release of active substances from selected carbohydrate biopolymer membranes

As a biopolymer application to control release systems is increasing at present, flat matrices (transdermal systems) should be highlighted. They constitute one of the most friendly form of drug administration to the patient. The present results concern investigations on the active substance release (ibuprofen and salicylic acid) from film matrices made from biopolymers: polylactid acid (PLA), dibutyrylchitin (DBC) and chitosan (CH). The amount of released active substance was examined with UV-VIS spectrophotometer. The release process was conducted in the medium of pH = 5.6 as the transdermal systems are applied to human skin surface of pH value approximating 5.6. Swelling of polymer samples was confirmed in the buffer of pH = 5.6 as well.The paper comprises the analysis of obtained release results according to the proposed two stage complex diffusion model.     

Bioreactors configured with distributors and carriers enhance the performance of continuous dark hydrogen fermentation

Anaerobic granular sludge bed (AnGSB) bioreactors were supplemented with activated carbon carriers and combined with distributors (e.g., acrylic resin board, stainless steel net and plastic net) installed at different locations to investigate the effect of distributor/carrier on biohydrogen production efficiency. The results show that plastic net stimulated the substrate/microorganisms contact and sludge granulation, thereby leading to a much better H₂ production performance when compared with those obtained from traditional CSTR. The highest H₂ production rate (7.89 L/h/L) and yield (3.42 mol H₂/mol sucrose) were obtained when two pieces of plastic nets were installed at both 4 cm and 16 cm from the bottom of AnGSB without carrier addition and the bioreactor was operated at a HRT of 0.5 h. For the AnGSB installed with two pieces of plastic net distributors, addition of carriers led to significant improvement on the H₂ production efficiency at a longer HRT (1–4 h) when compared with the carrier-absent system.     

Magnetic chitosan composite particles: Evaluation of thorium and uranyl ion adsorption from aqueous solutions

Magnetic chitosan composite particles with 40 μm average size and 24 emu/g saturation magnetization obtained by an in situ procedure were evaluated as a new low-cost adsorbent for radioactive wastewater decontamination. Sorbent characterization by SEM, EDX, FTIR and magnetization measurements proved that the target ions were bound and their surface distribution was uniform. The 18 emu/g magnetization of the metal loaded particles was high enough to ensure their easy magnetic field separation and recovery. The parameters influencing the sorption process were optimized with respect to sorbent mass, target ion concentration and contact time. The material under study had superior adsorption capacity both for uranyl (666.67 mg/g) and thorium (312.50 mg/g) ions when compared to other low-cost adsorbents reported in literature. The adsorption process is spontaneous and endothermic. The material may be regenerated and re-used.     

Preparation and characterization of micelles of oligomeric chitosan linked to all-trans retinoic acid

New amphiphilic chitosan derivatives of all trans retinoic acid-chitosan (RA-chitosan) with different molar feeding ratios of all trans retinoic acid (ATRA) were synthesized. The degree of ATRA substitution ranged from 8.72% to 18.78%. The RA-chitosan formed micelles with an average size of 142.14-208.4 nm, and zeta potential of +27.25 to 34.48 mV. The critical association concentration (CAC) was found to range from 1.3 × 10⁻² to 2.13 × 10⁻² mg ml⁻¹. Upon evaluation, the RA-chitosan shows no significant cytotoxicity on Hela and HepG2 cells. Analysis of micelles loaded with ATRA revealed that the size of micelles decreased by increasing loaded drug content while zeta potential did not change. ATRA was released slowly over 3-day period, and drug content had no effect on the release rate. These phenomena make RA-chitosan micelles as a candidate for drug carrier.     

Injection of air into the headspace improves fermentation of phosphoric acid pretreated sugarcane bagasse by Escherichia coli MM170

Microaeration (injecting air into the headspace) improved the fermentation of hemicellulose hydrolysates obtained from the phosphoric acid pretreatment of sugarcane bagasse at 170 °C for 10 min. In addition, with 10% slurries of phosphoric acid pretreated bagasse (180 °C, 10 min), air injection into the headspace promoted xylose utilization and increased ethanol yields from 0.16 to 0.20 g ethanol/g bagasse dry weight using a liquefaction plus simultaneous saccharification and co-fermentation process (L+SScF). This process was scaled up to 80 L using slurries of acid pretreated bagasse (96 h incubation; 0.6 L of air/min into the headspace) with ethanol yields of 312-347 L (82-92 gal) per tonne (dry matter), corresponding to 0.25 and 0.27 g/g bagasse (dry weight). Injection of small amounts of air into the headspace may provide a convenient alternative to subsurface sparging that avoids problems of foaming, sparger hygiene, flotation of particulates, and phase separation.     

Anaerobic digestion of source-segregated domestic food waste: Performance assessment by mass and energy balance

An anaerobic digester receiving food waste collected mainly from domestic kitchens was monitored over a period of 426 days. During this time information was gathered on the waste input material, the biogas production, and the digestate characteristics. A mass balance accounted for over 90% of the material entering the plant leaving as gaseous or digestate products. A comprehensive energy balance for the same period showed that for each tonne of input material the potential recoverable energy was 405 kWh. Biogas production in the digester was stable at 642 m³ tonne⁻¹ VS added with a methane content of around 62%. The nitrogen in the food waste input was on average 8.9 kg tonne⁻¹. This led to a high ammonia concentration in the digester which may have been responsible for the accumulation of volatile fatty acids that was also observed.     

Suppression of estrus in cats with melatonin implants

The objective of this study was to assess the efficacy of a subcutaneous melatonin implant to suppress estrus in queens (felis catus). The hypothesis was that this implant would temporarily and reversibly suppress estrus in queens without producing any clinically detectable side effects. Fourteen adult queens were maintained in cages under artificial illumination (14 h light:10 h dark) for 45 d and then randomly assigned to one of two treatments. At interestrus, queens received a single subcutaneous melatonin implant (18 mg; Melovine [CEVA Sante Animal, Libourne, France]; MEL: n = 9), or a single subcutaneous placebo implant without melatonin (0 mg; PLA; n = 5). At the next estrus, all queens received a second MEL (n = 9) or PLA (n = 5) implant. Blood samples were taken when queens displayed estrous signs and during interestrus to measure estradiol (E₂) and progesterone (P₄), respectively, by radioimmunoassay. There were no significant differences in duration of the interestrus interval in PLA cats, regardless of whether the implants were placed during interestrus or estrus (6.0 ± 9.7 d vs. 6.0 ± 9.7 d, respectively; least square means [LSM] ± SEM). However, when MEL implants were placed during interestrus, the duration of interestrus was approximately twice as long as that occurring when MEL implants were placed during estrus (113.3 ± 6.1 d vs. 61.1 ± 6.8 d, respectively; P < 0.01). Serum E₂ and P₄ concentrations were similar in queens with PLA and MEL implants and in queens that received implants in estrus and interestrus. In conclusion, a subcutaneous MEL implant effectively and reversibly suppressed estrus in queens for approximately 2 to 4 mo with no clinically detectable side effects.     

Co-extraction of egg white proteins using ion-exchange chromatography from ovomucin-removed egg whites

Efficient isolation of egg white components is desired due to its potential uses. Existing methods mainly targeted on one specific protein; an attempt has been made in the study to co-extract all the valuable egg white components in a continuous process. Ovomucin was first isolated by our newly developed two-step method; the resultant supernatant obtained after ovomucin isolation was used as the starting material for ion-exchange chromatography. Anion-exchange chromatography of 100 mM supernatant yielded a flow-through fraction and three other fractions representing ovotransferrin, ovalbumin and flavoproteins. The flow-through fraction was further separated into ovoinhibitor, lysozyme, ovotransferrin and an unidentified fraction which represents 4% of total egg white proteins. Chromatographic separation of 500 mM supernatant resulted in fractions representing lysozyme, ovotransferrin and ovalbumin. This co-extraction protocol represents a global recovery of 71.0% proteins.     

Isolation, characterization and evolution of a new thermophilic Bacillus licheniformis for lactic acid production in mineral salts medium

The high fermentation cost of lactic acid is a barrier for polylactic acid (PLA) to compete with the petrochemical derived plastics. In order to lower the cost of lactic acid, the industry needs a microorganism that can ferment various sugars at high temperature (50 °C) and at the same time using low cost mineral salts (MS) medium. One such bacterium, BL1, was isolated at 50 °C and identified as Bacillus licheniformis. BL1 can ferment glucose to optically pure l-lactate with a maximum specific productivity of 7.8 g/h l in LB medium and 0.7 g/h l in MS medium at 50 °C. BL1 can also consume 10% and 15% glucose in 20 and 48 h, respectively. After serial transfer of BL1 and BL2 in different concentrations of xylose and MS medium respectively, the final mutant BL3 could efficiently ferment glucose and xylose with specific productivity of 1.9 g/h l and 1.2 g/h l in strict MS medium.     

Efficient production of polylactic acid and its copolymers by metabolically engineered Escherichia coli

Polylactic acid (PLA) is one of the promising biodegradable polymers, which has been produced in a rather complicated two-step process by first producing lactic acid by fermentation followed by ring opening polymerization of lactide, a cyclic dimer of lactic acid. Recently, we reported the production of PLA and its copolymers by direct fermentation of metabolically engineered Escherichia coli equipped with the evolved propionate CoA-transferase and polyhydroxyalkanoate (PHA) synthase using glucose as a carbon source. When employing these initially constructed E. coli strains, however, it was necessary to use an inducer for the expression of the engineered genes and to feed succinate for proper cell growth. Here we report further metabolic engineering of E. coli strain to overcome these problems for more efficient production of PLA and its copolymers. This allowed efficient production of PLA and its copolymers without adding inducer and succinate. The finally constructed recombinant E. coli JLXF5 strain was able to produce P(3HB-co-39.6 mol% LA) having the molecular weight of 141,000 Da to 20 g l⁻¹ with a polymer content of 43 wt% in a chemically defined medium by the pH-stat fed-batch culture.     

Eucomis zambesiaca baker: Factors affecting in vitro bulblet induction

Eucomis species having considerable horticultural potential are used in African traditional medicine to treat various ailments. The effects of environmental and physiological parameters on the initiation and growth of bulblets using leaf explants were investigated. These included the effect of temperature (10, 15, 20, 25 and 30 °C), photoperiod (8 h light, 16 h light, continuous light and continuous dark), carbohydrates (sucrose, fructose and glucose) at different concentrations and combinations as well as various plant growth regulators; gibberellic acid (GA₃), indole-3-butyric acid (IBA), napthaleneacetic acid (NAA), N⁶-benzyladenine (BA), zeatin and others. Liquid shake and liquid static cultures versus solid cultures were investigated. Maximum number of bulblets per leaf explant was obtained at 20 °C, with an average of 3 bulbs per leaf explants and a bulblet mass of 57 mg. An 8 h light cycle produced 1.38 bulbs per leaf explant, at a mass of 42 mg. Fructose at 3% produced an average of 1.18 bulbs per leaf explant, 3.39 mm wide and weighing 56.6 mg. Of the plant growth regulators, 4.90 µM IBA was found to be the optimum treatment for bulblet induction, with an average bulb diameter of 4.36 mm and a mean bulblet mass of 79.07 mg. Liquid shake cultures exhibited poor growth while bulblet, leaf and root growth was improved in liquid static cultures. Successful micropropagation from leaf explants established that leaf explants can be used as an alternative explant source to bulbs. This protocol allows for the fast and economic mass propagation of Eucomis plants.     

Lipase-catalyzed enantioselective synthesis of (R,R)-lactide from alkyl lactate to produce PDLA (poly D-lactic acid) and stereocomplex PLA (poly lactic acid)

R-lactide, a pivotal monomer for the production of poly (D-lactic acid) (PDLA) or stereocomplex poly (lactic acid) (PLA) was synthesized from alkyl (R)-lactate through a lipase-catalyzed reaction without racemization. From among several types of lipase, only lipase B from Candida antarctica (Novozym 435; CAL-B) was effective in the reaction that synthesized (R,R)-lactide. Enantiopure (R,R)-lactide, which consisted of over 99% enantiomeric excess, was synthesized from methyl (R)-lactate through CAL-B catalysis. Removal of the methanol by-product was critical to obtain a high level of lactide conversion. The (R,R)-lactide yield was 56% in a reaction containing 100 mg of Novozym 435, 10 mM methyl (R)-lactate and 1500 mg of molecular sieve 5 A in methyl tert-butyl ether (MTBE). The important monomer (R,R)-lactide that is required for the production of the widely recognized bio-plastic PDLA and the PLA stereocomplex can be obtained using this novel synthetic method.     

Equine spermatozoa stored in the epididymis for up to 96 h at 4 °C can be successfully cryopreserved and maintain their fertilization capacity

After injury or death of a valuable male, recovery of epididymal spermatozoa may be the last chance to ensure preservation of its genetic material. The objective of this research was to study the effect of sperm storage, at 4 °C up to 96 h, in the epididymides obtained from castrated horses and its effect on different functional sperm parameters. Aims were to study the effect of (1) sperm storage on viability and chromatin condensation; (2) pre-incubation of recovered epididymal sperm in the freezing extender, prior cryopreservation, on viability and chromatin condensation; and (3) freezing–thawing on viability, chromatin condensation, ROS generation, protein tyrosine phosphorylation and heterologous fertilization rate (ICSI and IVF using bovine oocytes) of sperm recovered from the epididymis up to 96 h post castration. The average volume (720 ± 159 μL) and the concentration (6.5 ± 0.4 × 10⁹ spermatozoa/mL) of sperm recovered from the epididymis were not affected by storage. Sperm viability after refrigeration at 4 °C for up to72 h was similar (P < 0.01). The effect of sperm dilution in the freezing media showed similar values up to 48 h, while viability was preserved up to 72 h (P < 0.01). Cryopreserved spermatozoa show similar viability between different storage times. Chromatin condensation was not affected by storage time; however, incubation for 30 min in freezing medium and freezing–thawing process induced an increase in the chromatin decondensation. ROS generation was not affected by storage up to 96 h. Epididymal storage did not affect sperm protein tyrosine phosphorylation patterns; although the pattern of phosphorylation changed to strong staining of the equatorial segment when the sperm where capacitated in sperm–TALP. Finally, successful and similar pronuclear formation (analyzed by ICSI) and in vitro penetration (evaluated with bovine zone free oocyte) was observed using cryopreserved sperm obtained from prolong epididymal storage at 4 °C. In conclusion, cryopreservation of epididymal stallion sperm stored for up to 72 h in the epididymis at 4 °C, maintain both viability and ability to fertilize in vitro.     

An evaluation of the potential of Acacia dealbata as raw material for bioethanol production

In this work, the potential of Acacia dealbata as raw material for ethanol production was evaluated, as well as its composition with regard to cellulose, hemicelluloses, lignin, extractives and ash. The tree samples were subjected to several dilute acid pretreatments using a combined severity parameter ranging from 0.7 to 3.7. The highest ethanol concentration obtained was 10.31 g ethanol/L within 24 h by using a separate hydrolysis and fermentation of the water insoluble fraction after pretreatment at 180 °C with 0.8% of sulfuric acid for 15 min. With simultaneous saccharification and fermentation, results obtained for the washed solids of water insoluble fraction were better than those obtained with the whole slurry.     

Host species diversity and post-blood feeding carbohydrate availability enhance survival of females and fecundity in Aedes albopictus (Diptera: Culicidae)

Aedes albopictus mosquito is an opportunistic blood feeder and has a broad host range. The feeding behavior and habits of this mosquito are liable to increase the transmission potential of arboviruses. The survival and fecundity in A. albopictus fed on different hosts and post-blood meal provision of sugar were investigated in a laboratory-reared colony. Adult survival of caged female A. albopictus that were fed on blood of two different hosts (double meal) was higher than the females fed only on one host (single meal) (mean survival: 70.2 ± 9.6 vs. 55.5 ± 5.5%, respectively) when held in the laboratory for 72 h after blood feeding. Mean survival of females provided 10% sucrose solution (in water) after a single or double blood meal was higher (90.5 ± 6.4% and 89.3 ± 6.5%, respectively) than in the respective groups receiving water only following blood feeding (double meal: 49.0 ± 9.6%; single meal: 45.3 ± 10.9%). Females receiving a double meal were more fecund on average (89.0 ± 6.6 eggs) than females provided a single meal (82.3 ± 8.2 eggs).