Endophytic fungus Serendipita indica increased nutrition absorption and biomass accumulation in Cunninghamia lanceolata seedlings under low phosphate

Cunninghamia lanceolata is important forest tree species in southern China, and its successive plantations resulted in degradation of soil fertility in pure stands, causing decline in forest productivity. How to improve productivity in C. lanceolata pure stands is a tough task. Usage of mycorrhizal fungi might be a plausible access to the task. The objective is to study the possibility of the endophytic fungus Serendipita indica (named formerly as Piriformospora indica) in culture of C. lanceolata. Seeds were sowed in plastic pots with river sand. When seedlings had two true leaves, hyphae suspension solution of S. indica was added to near the roots of seedlings in each plastic pot. Such pots with seedlings were placed in a greenhouse and normal management was carried out for the seedlings. Symbiosis effects on root development, nutrition uptake and allocation, and biomass accumulation of C. lanceolata seedlings under low phosphate were investigated. The results showed that S. indica could symbiose with C. lanceolata. The symbiosis did not result in significant changes in root system architecture under low phosphate, but significantly increased nitrogen and phosphorus levels in leaves under low phosphate. Although the symbiosis did not significantly increased nitrogen allocation in leaves under low phosphate, it significantly increased phosphorus allocation in leaves. The interaction between S. indica and C. lanceolata resulted in increase in total biomass under low phosphate and changes in biomass allocation between shoots and roots. The results suggested that S. indica helps host plants to absorb more nutrients under low phosphate and to allocate more nitrogen and phosphate to leaves, promoting plant growth; the fungus might be used in pure stands of C. lanceolata because of its large-scaled axenic culture.     

Simultaneous use of sodium nitrate and urea as nitrogen sources improves biomass composition of Arthrospira platensis cultivated in a tubular photobioreactor

Arthrospira platensis is widely cultivated in open ponds for industrial purposes. However, high‐protein A. platensis biomass produced in photobioreactors (PBRs) is recommended for pharmaceutical and cosmetic formulations. A. platensis was cultivated in a 3.5 L tubular airlift PBR using both sodium nitrate and urea as nitrogen sources. Sodium nitrate was added from the start of the cultivation using a batch process. Urea was supplied daily at exponentially increasing feeding rate using a fed‐batch process. The simultaneous optimization of the independent variables, namely, total quantity of sodium nitrate (m_T1) and total quantity of urea (m_T2), led to an optimal condition of m_T1 = 15.0 mmol/L and m_T2 = 7.5 mmol/L. Maximum biomass concentration (5183 ± 94 mg/L) corresponding to the highest biomass productivity (683 ± 13 mg/L/day) was obtained under such condition. The addition protocol of both nitrogen sources resulted in high productivities of protein (6.2 ± 0.4 mg/L/day) as well as chlorophyll‐a (372.2 ± 7.7 mg/L/day). Such innovative process could be applied in the large‐scale production of A. platensis using tubular PBR for novel applications.     

碳酸盐碱度对钝顶螺旋藻生长的影响

研究了不同碳酸盐碱度浓度条件下,钝顶螺旋藻OD560值、藻液pH值及碳酸盐碱度的变化。结果显示:培养4d后,4mg/L和8mg/L组生长缓慢且呈现下降趋势,OD560值均低于对照组,具有极显著差异(P<0.01),16mg/L和32mg/L组与对照组相比,无显著差异,而64mg/L组具有显著差异(P<0.05)。第6~12d,4mg/L、8mg/L组和16mg/LOD560值均低于对照组,具有极显著差异(P<0.01),32mg/L组无显著差异,而64mg/L组在6~8d,具有显著差异(P<0.05),且在第10~12d,与其它实验组和对照组相比,表现出极显著差异性(P<0.01)。NaHCO3与Na2CO3组成的缓冲体系,其pH值调节功能优于单一使用NaHCO3的对照组。在充气状态下,实验期间各组的碱度始终保持动态平衡。     

Medium pH, carbon and nitrogen concentrations modulate the phosphate solubilization efficiency of Penicillium purpurogenum through organic acid production

Aims: To study phosphate solubilization in Penicillium purpurogenum as function of medium pH, and carbon and nitrogen concentrations. Methods and Results: Tricalcium phosphate (CP) solubilization efficiency of P. purpurogenum was evaluated at acid or alkaline pH using different C and N sources. Glucose‐ and (NH₄)₂SO₄‐based media showed the highest P solubilization values followed by fructose. P. purpurogenum solubilizing ability was higher in cultures grown at pH 6·5 than cultures at pH 8·5. Organic acids were detected in both alkaline and neutral media, but the relative percentages of each organic acid differed. Highest P release coincided with the highest organic acids production peak, especially gluconic acid. When P. purpurogenum grew in alkaline media, the nature and concentration of organic acids changed at different N and C concentrations. A factorial categorical experimental design showed that the highest P‐solubilizing activity, coinciding with the highest organic acid production, corresponded to the highest C concentration and lowest N concentration. Conclusions: The results described in the present study show that medium pH and carbon and nitrogen concentrations modulate the P solubilization efficiency of P. purpurogenum through the production of organic acids and particularly that of gluconic acid. In the P solubilization optimization studies, glucose and (NH₄)₂SO₄ as C and N sources allowed a higher solubilization efficiency at high pH. Significance and Impact of the Study: This organism is a potentially proficient soil inoculant, especially in P‐poor alkaline soils where other P solubilizers fail to release soluble P. Further work is necessary to elucidate whether these results can be extrapolated to natural soil ecosystems, where different pH values are present. Penicillium purpurogenum could be used to develop a bioprocess for the manufacture of phosphatic fertilizer with phosphate calcium minerals.     

Predictive modeling of biomass production by Spirulina platensis as function of nitrate and NaCl concentrations

Effects of nitrate (2.0, 2.5, and 3.0 g L^?1) and salt (0.5, 1.0, 1.5, 2.0 g L^?1) concentrations on biomass production by Spirulina platensis was examined in the Schlösser medium. The highest (p < 0.001) biomass yields and chlorophyll a content was observed at 2.5 g L^?1 nitrate and 1.5 g L^?1 NaCl as 3.495 g L^?1 and 29.92 mg L^?1, respectively. Increment rate of biomass production was especially found between 72 and 216 h. Modified Richards, Schnute, Logistic and Gompertz models was successfully predicted (r² > 0.96 and RSS ? 0.003) biomass production by S. platensis as function of nitrate and salt concentrations. Low residual sum of squares (RSS) and high regression coefficients (r²) indicated that used models were well fitted to the experiment data and it could be regarded as sufficient to describe biomass production of Spirulina sp. Biological variables i.e. production rate (μ) and lag time (λ) for S. platensis ranged 0.012–0.034 h^?1 and 2.43–5.85 h, respectively from biomass production were successfully predicted by modified Logistic model according to low RSS and F-testing value.     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Biotechnological application of homo- and heterotrinuclear iron(III) furoates for cultivation of iron-enriched Spirulina

New trinuclear iron(III) furoates with the general formula [Fe₃O(α-fur)₆(R-OH)₃]X, where α-fur C₄H₃OCOO, R = CH₃ (1), C₂H₅ (2), n-C₃H₇ (3), n-C₄H₉ (4), X = NO₃⁻ (1-4); [Fe₃O(α-Fur)₆(DMF)(CH₃OH)₂]NO₃ (5); [Fe₃O(α-Fur)₆(H₂O)(CH₃OH)₂]Cl (6); [Fe₂MO(α-Fur)₆(L)(H₂O)₂], where L = THF (7-9), DMF (10-12), M = Mn²⁺ (7, 10), Co²⁺ (8, 11), Ni²⁺ (9, 12) and [Fe₂MO(α-Fur)₆(3Cl-Py)₃], where M = Mn²⁺ (13), Co²⁺ (14), Ni²⁺ (15); have been prepared and investigated by Mössbauer and IR spectroscopy. The X-ray crystal structure for the 1·2CH₃OH complex indicates that it crystallizes in the monoclinic crystal system (P2₁/n) and has a structure typical of μ₃-O-bridged trinuclear iron(III) compounds. Coordination compounds 1, 4, 7, 8 can be used as regulators of the biochemical composition of cyanobacterium Spirulina platensis biomass. The supplementation of these compounds, in concentrations exceeding 5-10 mg/l, increases the content of iron, amino acids, peptides and carbohydrates in Spirulina.     

Light-dependent phosphate uptake of a submersed macrophyte Myriophyllum spicatum L.

The uptake kinetics of phosphate (Pi) by Myriophyllum spicatum was determined from adsorption and absorption under light and dark conditions. Pi uptake was light dependent and showed saturation following the Michaelis-Menten relation (in light: V = 16.91 × [Pi](1.335 + [Pi]), R² = 0.90, p < 0.001; in the dark: V = 5.13 × [Pi](0.351 + [Pi]), R² = 0.77, p < 0.001). Around 77% of the loss of Pi in the water column was absorbed into the tissue of M. spicatum, and only 23% was adsorbed on the surface of the plant shoots. Our study shows that M. spicatum shoots have a much higher affinity (in light: 3.9 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 3.7 μmol g⁻¹ dw h⁻¹ μM⁻¹) and V_max (maximum uptake rate, shoot light) for Pi uptake than many other aquatic macrophytes (in light: 0.002-0.23 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 0.002-0.19 μmol g⁻¹ dw h⁻¹ μM⁻¹), which may provide a competitive advantage over other macrophytes across a wide range of Pi concentrations.     

Influence of inorganic phosphate and organic buffers on cephalosporin production by Streptomyces clavuligerus

A high concentration of potassium phosphate (75–100 mM) stabilized pH and supported extensive growth of Streptomyces clavuligerus in a chemically defined medium; such a concentration also inhibited cephalosporin production. Although Tris buffer was found to have detrimental effects on growth and antibiotic production, 3-(N-morpholino)-propane sulfonate (MOPS) or 2-(N-morpholino)-ethane sulfonate (MES) buffer provided a nontoxic buffering system. In the presence of MOPS buffer, cephalosporin production was optimal at 25 mM phosphate, whereas higher concentrations of phosphate progressively inhibited antibiotic production up to 85% without modifying the pH pattern. MOPS buffer can be used to conduct fermentations at a relatively constant pH value in shake flasks.List of Non-Common Abbreviations MOPS 3-(N-morpholino)propane sulfonic acid - MES 2-(N-morpholino)ethane sulfonic acid     

Effect of pH on cellulase production and morphology of Trichoderma reesei and the application in cellulosic material hydrolysis

A low-cost of cellulase achieved through improving fermentation technology remains a key requirement for commercialization of cellulosic biofuels and biochemicals. pH plays a very important role in the process of cellulase synthesis by Trichoderma reesei. In this work, effects of pH on the production and production rates of three cellulase components (endoglucanase, exoglucanase, β-glucosidase) and mycelial morphology were studied. Production rates of the cellulase components were kept highest and the mycelial morphology was maintained at the optimal status by developing a phased pH control strategy in order to improve cellulase production. Cellulase production in terms of filter paper activity and β-glucosidase production in batch fermentation increased 17.6% and 22%. Saccharification efficiency of the enzyme obtained by pH control was evaluated by hydrolyzing pretreated corn cob. Saccharification yield increased significantly (up to 26.2%) compared with that without pH control. These results add new knowledge on approach for improving cellulase production.     

Cheese whey as a renewable substrate for microbial lipid and biomass production by Zygomycetes

Three Zygomycetes, Mortierella isabellina, Thamnidium elegans and Mucor sp., were tested for their ability of producing biomass and lipid‐containing γ‐linolenic acid (GLA) during their cultivation on cheese whey. M. isabellina consumed all of the available lactose and a significant amount of the available protein. On the contrary, the two other fungi seemed incapable of consuming lactose after protein exhaustion. In the second series of experiments, for M. isabellina a supplementary quantity of lactose was added into the medium in order to increase the C/N ratio and hence to increase the production of fat. In the case of T. elegans and Mucor sp., a supplementary quantity of ammonium sulfate was added in order to favor the consumption of lactose and the production of biomass. Indeed, enhancement of lipid production was observed for M. isabellina and biomass production for T. elegans and Mucor sp.. Fatty acid analysis of the microbial lipid showed a composition that presented non‐negligible changes in relation with the age of the culture and the C/N molar ratio of the medium. Further analysis of the fat showed that the quantity of neutral lipids was the more abundant. The fatty acid composition of neutral lipids resembled to that of total lipids. Phospholipids were the more unsaturated fraction for Mucor sp. and M. isabellina. GLA was synthesized in all trials but its concentration presented differences related with the utilized strains and the fermentation time. Growth of M. isabellina on lactose‐supplemented whey resulted in a maximum GLA production of 301 mg/L.     

Growth,biomass allocation,and autofragmentation responses to root and shoot competition in Myriophyllum spicatum as a function of sediment nutrient supply

Plant growth, biomass allocation and autofragmentation were investigated in response to root and shoot competition in the submersed macrophyte Myriophyllum spicatum L. growing in two sediment environments. Biomass accumulation and allocation were significantly affected by sediment fertility, with a higher total biomass observed in fertile sediment (average: 4.69 g per plant vs. 1.12 g per plant in infertile sediment). Root-to-shoot ratios were 0.34 and 0.06 in the infertile and fertile sediments, respectively, reflecting the high investment placed on roots under infertile conditions. In the presence of root, shoot, and full competition, whole plant biomass decreased by 18%, 12% and 24% in the infertile sediments, and 23%, 25% and 33% in the fertile sediments, respectively. Root weight ratios (RWRs) increased with root competition by 38% (P < 0.001) and 12% (P = 0.002), while leaf weight ratios (LWRs) decreased with shoot competition by 6% (P = 0.042) and 5% (P = 0.001) in the infertile and fertile sediments, respectively. A total of 406 autofragments were harvested in the fertile sediments, but none were obtained from the infertile sediments. In the control, autofragment number and biomass was 166% and 175% higher compared to the competition treatment. Root and shoot competition resulted in a 21% (P = 0.043) and 18% (P = 0.098) decrease in the autofragment biomass, respectively. These results indicated that M. spicatum responds to different sediment fertility by changing its allocation patterns. Moreover, both root and shoot competition influenced plant growth and autofragmentation, while sediment nutrient availability played an important role in M. spicatum autofragmentation.     

Regulation of the reconstituted chloroplast phosphate translocator by an H+ gradient

This report describes the influence of ΔpH on the transport of phosphate, triose phosphate and 3-phosphoglycerate catalyzed by the phosphate translocator in a reconstituted system. The H⁺ gradient across the liposome membrane is adjusted by the addition of external buffer solution and maintained for several minutes. The following results are obtained: (1) An inward directed H⁺ gradient leads to an increase of 3-phosphoglycerate transport and to a decrease of phosphate and triose phosphate transport. (2) An H⁺ gradient in the opposite direction results in a restriction of 3-phosphoglycerate influx whereas the influx of phosphate and triose phosphate is enhanced. (3) The magnitude of the pH effect depends on the internal substrate. Compared to the homoexchange mode, the effect of applied ΔpH is more pronounced in the heteroexchange mode. (4) Transport of phosphate and 3-phosphoglycerate is influenced by ΔpH in a different manner. In the case of phosphate and triose phosphate transport the observed effects are associated with changes in the apparent K_m values whereas in the case of 3-phosphoglycerate transport the application of a pH gradient is linked to a change of V_max. (5) In competition experiments with both substrates in the external medium, ΔpH influences the effect of phosphate as a competitive inhibitor of 3-phosphoglycerate transport whereas the effect of 3-phosphoglycerate on phosphate transport is not affected by a pH gradient. (6) The measured apparent K_m and V_max values under the influence of ΔpH can be used for the calculation of substrate fluxes across the envelope during illumination. It can be demonstrated that the increase of stromal pH in the light gives rise to a considerable change in the ratio of the substrates transported. Under conditions without pH gradient, the species transported out is mainly 3-phosphoglycerate and the species transported in is mainly triose phosphate. These fluxes are reversed when a pH gradient is applied (light conditions).     

A 31P-NMR study of structural and functional aspects of phosphate and phosphonate distribution in Tetrahymena

³¹P-NMR has been used to study the chemical nature of cytoplasmic components of live Tetrahymena in a non-invasive manner. The technique has further been used to characterize the physical behaviour of lipids extracted from this organism. In particular, we have shown the presence of large quantities of pyrophosphate and of tripolyphosphate in acid extracts of the organism. These are not detectable in the live cell due to the motionally rigid nature of the storage granules. We have characterized the distribution of phosphonic acids in the organism and followed the phase behaviour of the extracted cell lipids. Aqueous dispersions of extracted lipid show both bilayer and non-bilayer behaviour in the range of the growth temperature. The phosphonolipid in Tetrahymena appears to play a role similar to that of phosphatidylethanolamine in regulating the phase behaviour of the membrane. The high degree of unsaturation in the fatty acids of Tetrahymena is most likely responsible for the polymorphic phase behaviour observed near the growth temperature.     

Temperature-dependent phosphate solubilization by cold- and pH-tolerant species of Aspergillus isolated from Himalayan soil

Ten species of Aspergillus isolated from soil samples collected from different locations in the Indian Himalayan region have been studied for their growth requirements and tricalcium phosphate solubilization at different temperatures. The Aspergillus species could grow at low temperature and tolerated a wide range of pH. Phosphate solubilization by various Aspergillus species ranged between 374 μg/ml (A. candidus) to 1394 μg/ml (A. niger) at 28°C, 33 μg/ml (A. fumigatus) to 2354 μg/ml (A. niger) at 21°C, 93 μg/ml (A. fumigatus) to 1452 μg/ml (A. niger) at 14°C, and 21 μg/ml (A. wentii) to 83 μg/ml (A. niger) at 9°C. At 21 and 28°C, phosphate solubilization showed a decrease within 4 weeks of incubation, whereas at 9°C and 14°C, it continued further up to 6 weeks of incubation. In general, phosphate solubilization by different Aspergillus species was recorded at a maximum of 28°C or 21°C; biomass production was favored at 21°C or 14°C. Conversely, A. nidulans and A. sydowii exhibited maximum phosphate solubilization at 14°C and produced maximum biomass at 21°C. Data suggest that suboptimal conditions (higher or lower temperature) for fungal growth and biomass production were optimal for the production of metabolites involved in phosphate solubilization. Significant negative correlations were obtained between pH and phosphate solubilization for eight species at 28°C, for seven at 21°C, and for nine at 14°C. Extracellular phosphatase activity was exhibited only in case of A. niger, whreas intracellular phosphatase activity was detected in all species, the maximum being in A. niger. Statistically significant positive or negative correlations were obtained between phosphate solubilization and other parameters in most cases at different temperatures.     

Kinetics of Ca2+ and Sr2+ uptake by yeast. Effects of pH,cations and phosphate

The uptake of Ca²⁺ and Sr²⁺ by the yeast Saccharomyces cerevisiae is energy dependent, and shows a deviation from simple Michaelis-Menten kinetics. A model is discussed that takes into account the effect of the surface potential and the membrane potential on uptake kinetics.The rate of Ca²⁺ and Sr²⁺ uptake is influenced by the cell pH and by the medium pH. The inhibition of uptake at low concentrations of Ca²⁺ and Sr²⁺ at low pH may be explained by a decrease of the surface potential.The inhibition of Ca²⁺ and Sr²⁺ uptake by monovalent cations is independent of the divalent cation concentration. The inhibition shows saturation kinetics, and the concentration of monovalent cation at which half-maximal inhibition is observed, is equal to the affinity constant of this ion for the monovalent cation transport system. The inhibition of divalent cation uptake by monovalent cations appears to be related to depolarization of the cell membrane.Phosphate exerts a dual effect on uptake of divalent cations: and initial inhibition and a secondary stimulation. The inhibition shows saturation kinetics, and the inhibition constant is equal to the affinity constant of phosphate for its transport mechanism. The secondary stimulation can only partly be explained by a decrease of the cell pH, suggesting interaction of intracellular phosphate, or a phosphorylated compound, with the translocation mechanism.     

Effect of Tween 80 on the production of curdlan by Alcaligenes faecalis ATCC 31749

This study aims to investigate the effects of Tween 80 on curdlan production, cell growth, and glucosyltransferase activity. The addition of Tween 80 to the culture medium increased curdlan production. However, curdlan production did not increase further when excessive Tween 80 (>0.3% Tween 80) was added to the culture medium. The addition of Tween 80 to the culture medium did not affect cell growth. The glucosyltransferase activity involved in the curdlan synthesis increased with the increase of Tween 80 concentration. The glucosyltransferase activity did not increase further when excessive Tween 80 (>0.3% Tween 80) was added to the culture medium. Maximum curdlan was observed at day 5 and then levelled off. The biomass continued to increase until the end of the experimental period (6 d). Maximum glucosyltransferase activity was also observed at day 5 and decreased thereafter. The results indicate that the enhanced curdlan production by Tween 80 is highly correlated with glucosyltransferase activity.     

Amylopectin aggregation as a function of starch phosphate content studied by size exclusion chromatography and on-line refractive index and light scattering

Starches with a natural 65-fold span in covalently bound phosphate content were prepared from five different crops including sorghum, cassava, three potato varieties and an exotic ginger plant, Curcuma zedoaria, with extreme starch phosphate content. These starches were subjected to size exclusion chromatography with refractive index detection (SEC/RI). A simple and rapid method for starch solubilisation was used. The conditions during solubilisation (2 M NaOH) and separation (10 mM NaOH, 50°C) were such as enabling >94% recovery of the starch without detectable degradation. The aggregation properties of the starch was investigated using on line refractive index/multi angle laser light scattering (RI/MALLS) detection. Three major regions in the SEC profile were identified, consisting of large amylopectin aggregates, amylopectin particles with radius of gyration (R_g) of approx 200 nm (400 nm blocklets) and amylose. A procedure for correction of light scattering signals spread over the SEC profile as a result of aggregate tailing was developed. The significance of the relative amounts of these three molecular species on standard starch pasting parameters, as measured by a Rapid Visco Analyzer (RVA), was investigated. Starches with a high amount of amylopectin aggregates showed high peak viscosities. Moreover, very high amounts of starch bound phosphate or amylose appears to suppress the content of large aggregates resulting in low viscosity.     

Optimized production of Pichia guilliermondii biomass with zinc accumulation by fermentation

Zinc is an essential nutrient that plays an important role in several biological processes of living organisms. When bound to an organic substrate, Zn is more efficiently absorbed by organisms, has a high biological activity and a low toxicity. Due to its ability to incorporate metals, yeast biomass has been used frequently as a delivery vehicle for many mineral supplements. This study describes the screening of strains of yeast for production of biomass enriched with Zn by submerged fermentation. Five strains of yeasts, belonging to the genera Saccharomyces, Kluyveromyces and Pichia, were evaluated. The highest Zn concentration was 6820 mg/kg of dry weight biomass, using Pichia guilliermondii Wickerham LPB 063 after 120 h of cultivation in a medium with 0.5 g/L ZnSO₄. Process conditions were optimized using statistical experimental design methodology. Four parameters were identified in the 2⁸⁻⁴ fractional factorial design as having a significant effect on Zn accumulation: ZnSO₄ and Fe₂(SO₄)₃ concentrations, time of addition of the ZnSO₄ solution and concentration of soybean molasses. In the 3² experimental design, the influence of ZnSO₄ and Fe₂(SO₄)₃ concentrations were studied more closely. The highest Zn concentration (75,090 mg/kg dry weight) in the biomass was reached using the conditions: ZnSO₄, 10.0 g/L; Fe₂(SO₄)₃, 0.1 g/L in Erlenmeyer flasks. A batch liquid fermentation was carried out in a 2 L bioreactor for production of P. guilliermondii Wickerham LPB 063 containing organically bound Zn. The concentration of organically bound Zn after 144 h of fermentation was of 96,030 mg/kg, with a biomass production of 30 g/L. The maximum specific growth rate obtained (μ_max) was 0.0077/h, while the maximum productivity of biomass was at 0.1511 g/L/h.