Enhanced hydrogen and 1,3‐propanediol production from glycerol by fermentation using mixed cultures

The conversion of glycerol into high value products, such as hydrogen gas and 1,3‐propanediol (PD), was examined using anaerobic fermentation with heat‐treated mixed cultures. Glycerol fermentation produced 0.28 mol‐H₂/mol‐glycerol (72 mL‐H₂/g‐COD) and 0.69 mol‐PD/mol‐glycerol. Glucose fermentation using the same mixed cultures produced more hydrogen gas (1.06 mol‐H₂/mol‐glucose) but no PD. Changing the source of inoculum affected gas production likely due to prior acclimation of bacteria to this type of substrate. Fermentation of the glycerol produced from biodiesel fuel production (70% glycerol content) produced 0.31 mol‐H₂/mol‐glycerol (43 mL H₂/g‐COD) and 0.59 mol‐PD/mol‐glycerol. These are the highest yields yet reported for both hydrogen and 1,3‐propanediol production from pure glycerol and the glycerol byproduct from biodiesel fuel production by fermentation using mixed cultures. These results demonstrate that production of biodiesel can be combined with production of hydrogen and 1,3‐propanediol for maximum utilization of resources and minimization of waste. Biotechnol. Bioeng. 2009; 104: 1098–1106. © 2009 Wiley Periodicals, Inc.     

Enhanced methane and hydrogen production from municipal solid waste and agro-industrial by-products co-digested with crude glycerol

The effects of crude glycerol on the performance of single-stage anaerobic reactors treating different types of organic waste were examined. A reactor treating the organic fraction of municipal solid waste produced 1400 mL CH₄/d before the addition of glycerol and 2094 mL CH₄/d after the addition of glycerol. An enhanced methane production rate was also observed when a 1:4 mixture of olive mill wastewater and slaughterhouse wastewater was supplemented with crude glycerol. Specifically, by adding 1% v/v crude glycerol to the feed, the methane production rate increased from 479 mL/d to 1210 mL/d. The extra glycerol-COD added to the feed did not have a negative effect on the reactor performance in either case. Supplementation of the feed with crude glycerol also had a significant positive effect on anaerobic fermentation reactors. Hydrogen yield was 26 mmole H₂/g VS added and 15 mmole H₂/g VS added in a reactor treating the organic fraction of municipal solid waste and a 1:4 mixture of olive mill and slaughterhouse wastewater. The addition of crude glycerol to the feed enhanced hydrogen yield at 2.9 mmole H₂/g glycerol added and 0.7 mmole H₂/g glycerol added.     

Mining genomic databases to identify novel hydrogen producers

The realization that fossil fuel reserves are limited and their adverse effect on the environment has forced us to look into alternative sources of energy. Hydrogen is a strong contender as a future fuel. Biological hydrogen production ranges from 0.37 to 3.3 moles H(2) per mole of glucose and, considering the high theoretical values of production (4.0 moles H(2) per mole of glucose), it is worth exploring approaches to increase hydrogen yields. Screening the untapped microbial population is a promising possibility. Sequence analysis and pathway alignment of hydrogen metabolism in complete and incomplete genomes has led to the identification of potential hydrogen producers.     

Energy recovery from lipid extracted,transesterified and glycerol codigested microalgae biomass

The production of methane (CH₄) via the anaerobic digestion of microalgae biomass residues from the biodiesel production process has the potential to meet some of the energy requirements of the primary biomass to fuel conversion process. This paper investigates the practical CH₄ yields achievable from the anaerobic conversion of the microalgae residues (as well as codigestion with glycerol) after biodiesel production using both the conventional and in situ transesterification methods. Results demonstrate that the type of lipid extraction solvent utilized in the conventional transesterification process could inhibit subsequent CH₄ production. On the basis of actual CH₄ production, a recoverable energy of 8.7–10.5 MJ kg^?1 of dry microalgae biomass residue was obtained using the lipid extracted and transesterified microalgae samples. On codigesting the microalgae residues with glycerol, a 4–7% increase in CH₄ production was observed.     

Binding of glycerol by microtubule protein.

When microtubules are purified by polymerization and depolymerization in a buffer containing glycerol, some glycerol becomes bound to the microtubule protein and is not removable by gel filtration or by prolonged dialysis. Both 6s tubulin and larger aggregates containing tubulin and accessory proteins bind glycerol. The 6s fraction has associated with it about 5 moles of glycerol per mole of tubulin dimer; 3 moles are exchangeable upon polymerization-depolymerization and 2 moles are not. The aggregate fraction has associated with it about 22 moles of glycerol per mole of tubulin dimer; approximately 11 moles are exchangeable and 11 moles are not.     

l-Lactate Production from Biodiesel-Derived Crude Glycerol by Metabolically Engineered Enterococcus faecalis: Cytotoxic Evaluation of Biodiesel Waste and Development of a Glycerol-Inducible Gene Expression System

Biodiesel waste is a by-product of the biodiesel production process that contains a large amount of crude glycerol. To reuse the crude glycerol, a novel bioconversion process using Enterococcus faecalis was developed through physiological studies. The E. faecalis strain W11 could use biodiesel waste as a carbon source, although cell growth was significantly inhibited by the oil component in the biodiesel waste, which decreased the cellular NADH/NAD⁺ ratio and then induced oxidative stress to cells. When W11 was cultured with glycerol, the maximum culture density (optical density at 600 nm [OD₆₀₀]) under anaerobic conditions was decreased 8-fold by the oil component compared with that under aerobic conditions. Furthermore, W11 cultured with dihydroxyacetone (DHA) could show slight or no growth in the presence of the oil component with or without oxygen. These results indicated that the DHA kinase reaction in the glycerol metabolic pathway was sensitive to the oil component as an oxidant. The lactate dehydrogenase (Ldh) activity of W11 during anaerobic glycerol metabolism was 4.1-fold lower than that during aerobic glycerol metabolism, which was one of the causes of low l-lactate productivity. The E. faecalis pflB gene disruptant (Δpfl mutant) expressing the ldhL1_LP gene produced 300 mM l-lactate from glycerol/crude glycerol with a yield of >99% within 48 h and reached a maximum productivity of 18 mM h⁻¹ (1.6 g liter⁻¹ h⁻¹). Thus, our study demonstrates that metabolically engineered E. faecalis can convert crude glycerol to l-lactate at high conversion efficiency and provides critical information on the recycling process for biodiesel waste.     

Fermentative Metabolism of Chlamydomonas reinhardii: III. Photoassimilation of Acetate

The anaerobic photodissimilation of acetate by Chlamydomonas reinhardii F-60 adapted to a hydrogen metabolism was studied utilizing manometric and isotopic techniques. The rate of photoanaerobic (N₂) acetate uptake was approximately 20 μmoles per milligram chlorophyll per hour or one-half that of the photoaerobic (air) rate. Under N₂, cells produced 1.7 moles H₂ and 0.8 mole CO₂ per mole of acetate consumed. Gas production and acetate uptake were inhibited by monofluoroacetic acid (MFA), 3-(3′,4′-dichlorophenyl)-1,1-dimethylurea (DCMU) and by H₂. Acetate uptake was inhibited about 50% by 5% H₂ (95% N₂). H₂ in the presence of MFA or DCMU stimulated acetate uptake and the result was interpreted to indicate a transition from oxidative to reductive metabolism. Carbon-14 from both [1-¹⁴C]- and [2-¹⁴C]acetate was incorporated under N₂ or H₂ into CO₂, lipids, and carbohydrates. The methyl carbon of acetate accumulated principally (75-80%) in the lipid and carbohydrate fractions, whereas the carboxyl carbon contributed isotope primarily to CO₂ (56%) in N₂. The presence of H₂ caused a decrease in carbon lost from the cell as CO₂ and a greater proportion of the acetate was incorporated into lipid. The results support the occurrence of anaerobic and light-dependent citric acid and glyoxylate cycles which affect the conversion of acetate to CO₂ and H₂ prior to its conversion to cellular material.     

Fermentative H2 production from residual glycerol: a review

The fermentative production of H₂ from residual glycerol is an attractive alternative for clean energy production from a waste product. Selection of operational variables for microbial populations with an adequate diversity in order to improve H₂ yields is an issue faced during optimization of biological production of H₂. Operational and environmental factors affect both microbial diversity and the activity of specific enzymes. Therefore, these variables must be controlled to obtain the best H₂ yields. This review covers the main variables involved in the fermentative production of H₂ from crude glycerol and the biochemistry of the anaerobic digestion of glycerol, with a focus on the microbial diversity involved in this process.     

Current Prospects on Production of Microbial Lipid and Other Value-Added Products Using Crude Glycerol Obtained from Biodiesel Industries

Production of microbial lipids using crude glycerol from the biodiesel industry is reviewed in this paper. Approximately 10 wt.% of crude glycerol is obtained for every batch of biodiesel. The crude glycerol accumulated contains various impurities and hence cannot be used for any commercial applications without further purification. Its conversion via biological and chemical routes into valuable products has been studied by different researchers. Varieties of fungal, yeasts, and algal species have been used to produce microbial lipids from crude glycerol. However, research focus on screening a robust industrial oleaginous strain capable of doing this is still on-going. Due to its chemical similarity to vegetable oils, microbial lipids are considered a potential renewable feedstock for biodiesel production and for applications in food and pharmaceutical industries. Its conversion to polyols and subsequently to biobased polymers is also being explored. The rising price of vegetable oils, increasing energy demands, growing environmental concerns, and availability of crude glycerol as a cheap carbon substrate result in considerable potential for the application of these processes in the future.     

Heterotrophic growth and lipid production of Chlorella protothecoides on glycerol

During the production of biodiesel, a significant amount of glycerol is generated which currently has little commercial value. A study on the growth and lipid production of Chlorella protothecoides using glycerol as the carbon source was performed to demonstrate the utility of recycling crude glycerol created during biodiesel production. Glycerol was examined as both the sole carbon source and in combination with glucose. Algae cultures grown on only glycerol in shake flasks showed a specific growth rate and final lipid yield of 0.1/h and 0.31 g lipid/g substrate, respectively. The values were similar to those observed on pure glucose, 0.096/h and 0.24 g lipid/g substrate. When the media contained a mixture of glycerol and glucose, simultaneous uptake of the two substrates was observed. Due to the difference in rates of lipid storage, lipid production was 0.077 g lipid/(l h) during growth on glycerol, while growth on glucose had a productivity of 0.096 g lipid/(l h). During growth on the 9:1 mixture of both glucose and glycerol, lipid productivity was 0.098 g lipid/(l h). In order to simulate the use of waste glycerol from biodiesel production the experiments were repeated and similar growth rates, yields, and lipid productivities were achieved. Therefore, we have demonstrated the promise for simultaneous high growth rates and lipid yields of C. protothecoides heterotrophically grown on mixtures of glycerol.     

Influence of iron,phosphate and methyl viologen on glycerol fermentation of Clostridium butyricum

 The effect of methyl viologen addition, and iron and phosphate limitation on product distribution during glycerol fermentation of Clostridium butyricum DSM 5431 was investigated in continuous culture. Special attention was paid to the gaseous products H₂ and CO₂, which were measured on-line. In all three cases, an increased yield of 1,3-propanediol linked to a decreased hydrogen release was observed, indicating that a higher proportion of electrons was channelled from reduced ferredoxin towards NADH₂ production. The specific substrate consumption rates and the specific production rates revealed that this increase in propanediol yield was not obtained at the expense of glycolysis products but by an increased substrate conversion (overflow metabolism). The acetate/ butyrate ratio during glycerol fermentation was essentially influenced by the availability of iron. It was substantially increased when the culture turned from iron excess to iron-limited conditions. Therefore iron limitation proved to be a suitable means to achieve high 1,3-propanediol yields and to reduce butyrate formation. Received: 29 August 1995 / Accepted: 20 September 1995     

Optimization of a Novel Two-step Process Comprising Re-esterification and Transesterification in a Single Reactor for Biodiesel Production Using Waste Cooking Oil

Waste cooking oil (WCO) has attracted attention as a non-edible feedstock for biodiesel. Although an alkali catalyst has several advantages over an acid catalyst in biodiesel production, biodiesel conversion from WCO is only 5.2% when using an alkali catalyst (NaOH), owing to its high free fatty acid (FFA) content of 4.2%. In this study, a novel two-step process in a single reactor, comprised of re-esterification of the FFAs with crude glycerol, using a Tin (II) chloride (SnCl₂) catalyst, and subsequent transesterification with methanol, using an alkali catalyst, was adopted, and each step was optimized. This study revealed that the FFA content after re-esterification should be approximately 1.5%, not only to save glycerol and the catalyst involved in the re-esterification, but also to achieve high biodiesel conversion during the transesterification. An alkaline catalyst was successfully used to produce biodiesel in the second step, and a 92.8% conversion to biodiesel was achieved under the optimized conditions (0.6% catalyst relative to WCO, 0.2mL-methanol/WCO, 70ºC, 3 h). Overall, this novel two-step process achieved highly enhanced biodiesel conversion (4.0% to 92.8%) with significantly reduced reaction time (12 h to 4 h) and methanol requirements (15 mL/g-WCO to 0.2 mL/g-WCO).     

Environmental and genotypic effects on the respiration associated with symbiotic nitrogen fixation in peas

Estimated values for the respiration associated with symbiotic nitrogen fixation in Pisum sativum L. were independent of irradiance, temperature, plant age, and CO₂ concentration, despite large variation in the total rates of C₂H₂ reduction and root + nodule respiration. Similar values were also found in Phaseolus vulgaris L., Vicia faba L. and Glycine max (L.) Merr. Among all combinations of four Pisum cultivars with four Rhizobium leguminosarum inoculants only the plant genotype significantly affected the fixation-linked respiration, although both plant and bacterial types significantly influenced the total rate of C₂H₂ reduction. On the basis of measured rates of H₂ evolution and C₂H₂ reduction, or total nitrogen gain in the same system, the least respiration per unit of ammonia produced symbiotically was estimated as 4.8 to 6.9 moles CO₂ (mole NH₃)⁻¹ in Laxton's Progress and the greatest as 9.3 to 13.3 moles CO₂ (mole NH₃)⁻¹ in an Indian cultivar, as compared to a theoretical minimum respiration requirement of 4.7 moles CO₂ (mole NH₃)⁻¹ in peas.     

Co-gasification of hardwood chips and crude glycerol in a pilot scale downdraft gasifier

Seeking appropriate approaches to utilize the crude glycerol produced in biodiesel production is very important for the economic viability and environmental impacts of biodiesel industry. Gasification may be one of options for addressing this issue. Co-gasification of hardwood chips blending with crude glycerol in various loading levels was undertaken in the study involving a pilot scale fixed-bed downdraft gasifier. The results indicated that crude glycerol loading levels affected the gasifier’s performance and the quality of syngas produced. When crude glycerol loading level increased, the CO, CH₄, and tar concentrations of the syngas also increased but particle concentration decreased. Though further testing is suggested, downdraft gasifiers could be run well with hardwood chips blending with liquid crude glycerol up to 20 (wt%). The syngas produced had relatively good quality for fueling internal combustion engines. This study provides a considerable way to utilize crude glycerol.     

Metabolic networks to generate pyruvate,PEP and ATP from glycerol in Pseudomonas fluorescens

Glycerol is a major by-product of the biodiesel industry. In this study we report on the metabolic networks involved in its transformation into pyruvate, phosphoenolpyruvate (PEP) and ATP. When the nutritionally-versatile Pseudomonas fluorescens was exposed to hydrogen peroxide (H₂O₂) in a mineral medium with glycerol as the sole carbon source, the microbe reconfigured its metabolism to generate adenosine triphosphate (ATP) primarily via substrate-level phosphorylation (SLP). This alternative ATP-producing stratagem resulted in the synthesis of copious amounts of PEP and pyruvate. The production of these metabolites was mediated via the enhanced activities of such enzymes as pyruvate carboxylase (PC) and phosphoenolpyruvate carboxylase (PEPC). The high energy PEP was subsequently converted into ATP with the aid of pyruvate phosphate dikinase (PPDK), phosphoenolpyruvate synthase (PEPS) and pyruvate kinase (PK) with the concomitant formation of pyruvate. The participation of the phospho-transfer enzymes like adenylate kinase (AK) and acetate kinase (ACK) ensured the efficiency of this O₂-independent energy-generating machinery. The increased activity of glycerol dehydrogenase (GDH) in the stressed bacteria provided the necessary precursors to fuel this process. This H₂O₂-induced anaerobic life-style fortuitously evokes metabolic networks to an effective pathway that can be harnessed into the synthesis of ATP, PEP and pyruvate. The bioconversion of glycerol to pyruvate will offer interesting economic benefit.     

Bio-hydrogen production by biodiesel-derived crude glycerol bioconversion: a techno-economic evaluation

Global biodiesel production is continuously increasing and it is proportionally accompanied by a huge amount of crude glycerol (CG) as by-product. Due to its crude nature, CG has very less commercial interest; although its pure counterpart has different industrial applications. Alternatively, CG is a very good carbon source and can be used as a feedstock for fermentative hydrogen production. Further, a move of this kind has dual benefits, namely it offers a sustainable method for disposal of biodiesel manufacturing waste as well as produces biofuels and contributes in greenhouse gas (GHG) reduction. Two-stage fermentation, comprising dark and photo-fermentation is one of the most promising options available for bio-hydrogen production. In the present study, techno-economic feasibility of such a two-stage process has been evaluated. The analysis has been made based on the recent advances in fermentative hydrogen production using CG as a feedstock. The study has been carried out with special reference to North American biodiesel market; and more specifically, data available for Canadian province, Québec City have been used. Based on our techno-economic analysis, higher production cost was found to be the major bottleneck in commercial production of fermentative hydrogen. However, certain achievable alternative options for reduction of process cost have been identified. Further, the process was found to be capable in reducing GHG emissions. Bioconversion of 1 kg of crude glycerol (70 % w/v) was found to reduce 7.66 kg CO₂ eq (equivalent) GHG emission, and the process also offers additional environmental benefits.     

Improved glycerol to ethanol conversion by <Emphasis Type="Italic">E. coli</Emphasis> using a metagenomic fragment isolated from an anaerobic reactor

Crude glycerol obtained as a by-product of biodiesel production is a reliable feedstock with the potential to be converted into reduced chemicals with high yields. It has been previously shown that ethanol is the primary product of glycerol fermentation by Escherichia coli. However, few efforts were made to enhance this conversion by means of the expression of heterologous genes with the potential to improve glycerol transport or metabolism. In this study, a fosmid-based metagenomic library constructed from an anaerobic reactor purge sludge was screened for genetic elements that promote the use and fermentation of crude glycerol by E. coli. One clone was selected based on its improved growth rate on this feedstock. The corresponding fosmid, named G1, was fully sequenced (41 kbp long) and the gene responsible for the observed phenotype was pinpointed by in vitro insertion mutagenesis. Ethanol production from both pure and crude glycerol was evaluated using the parental G1 clone harboring the ethanologenic plasmid pLOI297 or the industrial strain LY180 complemented with G1. In mineral salts media containing 50 % (v/v) pure glycerol, ethanol concentrations increased two-fold on average when G1 was present in the cells reaching up to 20 g/L after 24 h fermentation. Similar fermentation experiments were done using crude instead of pure glycerol. With an initial OD₆₂₀ of 8.0, final ethanol concentrations after 24 h were much higher reaching 67 and 75 g/L with LY180 cells carrying the control fosmid or the G1 fosmid, respectively. This translates into a specific ethanol production rate of 0.39 g h^?1 OD^?1 L^?1.     

Carbon and electron flow in Clostridium butyricum grown in chemostat culture on glucose-glycerol mixtures

Summary The metabolism of C. butyricum was manipulated, at neutral pH and in carbon limited chemostat cultures by changing the overall degree of reduction of the substrate, using mixtures of glucose and glycerol. Cultures grown on glucose alone produced only acids (acetate, butyrate and lactate). When the glycerol (in C moles)/glucose+glycerol (in C moles) ratio was progressively changed from 0 to 1 a corresponding increase of 1,3-propanediol production occured and an immediate and drastic decrease of the specific rate of acetate production was observed while the specific rate of butyrate production only decreased slightly. For glycerol (in C moles)/glucose+glycerol (in C moles) ratios higher than 0.5, the q_{NAD(P)H from Fd} and the CO₂/H₂ molar ratio increased sharply, the first becoming positive and the second higher than 1. This indicates a complete reversion of the electron flow: part of reduced ferredoxin produced by the phosphoroclastic cleavage of pyruvate to acetyl-CoA was diverted from H₂ formation toward NAD(P) reduction by the ferredoxin-NAD(P) reductase(s) in order to produce NAD(P)H. This change in the electron flow was associated to an increase in the specific rate and the yield of 1,3-propanediol production related to glycerol.     

A model for the effects of primary substrates on the kinetics of reductive dehalogenation

A kinetic model that describes substrate interactions during reductive dehalogenation reactions is developed. This model describes how the concentrations of primary electron-donor and -acceptor substrates affect the rates of reductive dehalogenation reactions. A basic model, which considers only exogenous electron-donor and -acceptor substrates, illustrates the fundamental interactions that affect reductive dehalogenation reaction kinetics. Because this basic model cannot accurately describe important phenomena, such as reductive dehalogenation that occurs in the absence of exogenous electron donors, it is expanded to include an endogenous electron donor and additional electron acceptor reactions. This general model more accurately reflects the behavior that has been observed for reductive dehalogenation reactions. Under most conditions, primary electron-donor substrates stimulate the reductive dehalogenation rate, while primary electron acceptors reduce the reaction rate. The effects of primary substrates are incorporated into the kinetic parameters for a Monod-like rate expression. The apparent maximum rate of reductive dehalogenation (q _{m, ap} ) and the apparent half-saturation concentration (K _ap ) increase as the electron donor concentration increases. The electron-acceptor concentration does not affect q _{m, ap} , but K _ap is directly proportional to its concentration.Definitions for model parameters RX halogenated aliphatic substrate - E-M ⁿ reduced dehalogenase - E-M ⁿ⁺² oxidized dehalogenase - [E-M ⁿ ] steady-state concentration of the reduced dehalogenase (moles of reduced dehalogenase per unit volume) - [E-M ⁿ⁺²] steady-state concentration of the oxidized dehalogenase (moles of reduced dehalogenase per unit volume) - DH₂ primary exogenous electron-donor substrate - A primary exogenous electron-acceptor substrate - A2 second primary exogenous electron-acceptor substrate - X biomass concentration (biomass per unit volume) - f fraction of biomass that is comprised of the dehalogenase (moles of dehalogenase per unit biomass) - stoichiometric coefficient for the reductive dehalogenation reaction (moles of dehalogenase oxidized per mole of halogenated substrate reduced) - stoichiometric coefficient for oxidation of the primary electron donor (moles of dehalogenase reduced per mole of donor oxidized) - stoichiometric coefficient for oxidation of the endogenous electron donor (moles of dehalogenase reduced per unit biomass oxidized) - stoichiometric coefficient for reduction of the primary electron acceptor (moles of dehalogenase oxidized per mole of acceptor reduced) - stoichiometric coefficient for reduction of the second electron acceptor (moles of dehalogenase oxidized per mole of acceptor reduced) - r _RX rate of the reductive dehalogenation reaction (moles of halogenated substrate reduced per unit volume per unit time) - r _d1 rate of oxidation of the primary exogenous electron donor (moles of donor oxidized per unit volume per unit time) - r _d2 rate of oxidation of the endogenous electron donor (biomass oxidized per unit volume per unit time) - r _a1 rate of reduction of the primary exogenous electron acceptor (moles of acceptor reduced per unit volume per unit time) - r _a2 rate of reduction of the second primary electron acceptor (moles of acceptor reduced per unit volume per unit time) - k _RX mixed second-order rate coefficient for the reductive dehalogenation reaction (volume per mole dehalogenase per unit time) - k _d1 mixed-second-order rate coefficient for oxidation of the primary electron donor (volume per mole dehalogenase per unit time) - k _d2 mixed-second-order rate coefficient for oxidation of the endogenous electron donor (volume per mole dehalogenase per unit time) - b first-order biomass decay coefficient (biomass oxidized per unit biomass per unit time) - k _a1 mixed-second-order rate coefficient for reduction of the primary electron acceptor (volume per mole dehalogenase per unit time) - k _a2 mixed-second-order rate coefficient for reduction of the second primary electron acceptor (volume per mole dehalogenase per unit time) - q _m,ap apparent maximum specific rate of reductive dehalogenation (moles of RX per unit biomass per unit time) - K _ap apparent half-saturation concentration for the halogenated aliphatic substrate (moles of RX per unit volume) - k _ap apparent pseudo-first-order rate coefficient for reductive dehalogenation (volume per unit biomass per unit time)     

Hydrogenase mediated nitrite reduction in chlorella

The assay of the hydrogenase of glucose-grown cells of Chlorella pyrenoidosa, strain 7-11-05 by means of nitrite reduction with molecular hydrogen is described. The hydrogenase of Chlorella shows maximum activity immediately after equilibration in the hydrogen atmosphere. The hydrogenase mediated reduction of nitrite to ammonia requires the presence of CO₂. However, at pH 6.4. when the reaction proceeds optimally, there is apparently sufficient retention of metabolic CO₂ to support the reaction, which goes to completion, at near maximum rates.

Reduction of nitrite in the hydrogenase system when CO₂ is present results in the uptake of 3 moles of H₂ per mole of nitrite and ammonia is the product. When CO₂ is absent or limiting, ammonia is also formed from nitrite but with the uptake of less than the stoichiometric amount of H₂. It is concluded that CO₂ is essential for the uptake of H₂, and that in the absence of CO₂ internal hydrogen donors support nitrite reduction.

The possibility that CO₂ exerts a catalytic effect in all reductions mediated by hydrogenase in algae is considered, and a further hypothesis, that hydrogenase arises from that portion of the photosynthetic machinery which also shows a catalytic requirement for CO₂, is proposed.