Effect of chitosan on UASB treating POME during a transition from mesophilic to thermophilic conditions

The effects of chitosan addition on treatment of palm oil mill effluent were investigated using two lab-scale upflow anaerobic sludge bed (UASB) reactors: (1) with chitosan addition at the dosage of 2 mg chitosan per g volatile suspended solids on the first day of the operation (R1), (2) without chitosan addition (the control, R2). The reactors were inoculated with mesophilic anaerobic sludge which was acclimatized to a thermophilic condition with a stepwise temperature increase of 5 °C from 37 to 57 °C. The OLR ranged from 2.23 to 9.47 kg COD m⁻³ day⁻¹. The difference in biogas production rate increased from non-significant to 18% different. The effluent volatile suspended solids of R1 was 65 mg l⁻¹ lower than that of R2 on Day 123. 16S rRNA targeted denaturing gradient gel electrophoresis (DGGE) fingerprints of microbial community indicated that some methanogens in the genus Methanosaeta can be detected in R1 but not in R2.     

Anaerobic degradation of tetrachlorobisphenol-A in river sediment

This study investigated the anaerobic degradation of tetrachlorobisphenol-A (TCBPA) in sediment samples collected at three sites along the Erren River in southern Taiwan. TCBPA anaerobic degradation half-lives (t_1/2) in the sediment were 12.6, 16.9 and 21.7 d at concentrations of 50, 100, and 250 ??g g⁻¹, respectively. TCBPA (50 ??g g⁻¹) anaerobic degradation half-lives (t_1/2) in the sediment were 10.1, 11.8, 11.0, 11.6, 10.8, 9.1, 8.5, 18.2, 19.3, and 16.1 d by the addition of yeast extract (5 mg l⁻¹), cellulose (0.96 mg l⁻¹), sodium chloride (1%), brij 30 (130 mg l⁻¹), brij 35 (43 mg l⁻¹), rhamnolipid (55 ??M), surfactin (91 ??M), phthalic esters (2 mg l⁻¹), nonylphenol (2 mg l⁻¹), and heavy metals (2 mg l⁻¹), respectively. The degradation rate of TCBPA was enhanced by the addition of yeast extract, cellulose, sodium chloride, brij 30, brij 35, rhamnolipid, or surfactin. However, it was inhibited by the addition of phthalic esters, nonylphenol, or heavy metals. Also noted was the presence of dichlorobisphenol-A and bisphenol-A, two intermediate products resulting from the anaerobic degradation of TCBPA accumulated in the sediments.     

Influence of carbon source and inoculum type on anaerobic biomass adhesion on polyurethane foam in reactors fed with acid mine drainage

This paper analyzes the influence of carbon source and inoculum origin on the dynamics of biomass adhesion to an inert support in anaerobic reactors fed with acid mine drainage. Formic acid, lactic acid and ethanol were used as carbon sources. Two different inocula were evaluated: one taken from an UASB reactor and other from the sediment of a uranium mine. The values of average colonization rates and the maximum biomass concentration (C_max) were inversely proportional to the number of carbon atoms in each substrate. The highest C_max value (0.35 g TVS g⁻¹ foam) was observed with formic acid and anaerobic sludge as inoculum. Maximum colonization rates (v_max) were strongly influenced by the type of inoculum when ethanol and lactic acid were used. For both carbon sources, the use of mine sediment as inoculum resulted in a v_max of 0.013 g TVS g⁻¹ foam day⁻¹, whereas 0.024 g TVS g⁻¹ foam day⁻¹ was achieved with anaerobic sludge.     

Laboratory scale examination of the effects of overloading on the anaerobic digestion by glycerol

The anaerobic digestion of pure glycerol, which produces a baseline acetic acid to propionic acid ratio of 0.2, was studied in laboratory scale reactors (3 l working volume) at mesophilic temperature (37 °C) with 3000 mg chemical oxygen demand (COD) l⁻¹d⁻¹. During the experiment tVFA and C2-C6 VFA analysis and daily biogas yield measurement were carried out. Following 10 days of a 15% d⁻¹ increase in the organic loading rate (OLR) of 3.0-10.5 g COD l⁻¹d⁻¹, the concentration of propionic acid increased to 6200-8000 mg l⁻¹. Then the inoculum was divided into three parts feeding with 100% glycerol, 50% glycerol + 50% acetic acid, and 50% glycerol + 50% thick stillage, (presented in % of 2.60 g COD l⁻¹d⁻¹ OLR), respectively. The application of co-substrates reduced the recovery period by 5 days compared to feeding with pure glycerol. When the reactors were loaded with glycerol again (10% OLR raise per day) the previously applied co-substrates had a positive effect on the VFA composition and the biogas yield as well.     

Performance of a horizontal-flow anaerobic immobilized biomass (HAIB) reactor and dynamics of the microbial community during degradation of pentachlorophenol (PCP)

The anaerobic biological treatment of pentachlorophenol (PCP) and methanol as the main carbon source was investigated in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor at 30+/-1 degrees C, during a 220-day trial period. The reactor biomass was developed as an attached biofilm on polyurethane foam particles, with 24h of hydraulic retention time. The PCP concentrations, which ranged from 2.0 to 13.0 mg/L, were controlled by adding synthetic substrate. The HAIB reactor reduced 97% of COD and removed 99% of PCP. The microbial biofilm communities of the HAIB reactor amended with PCP, without previous acclimatization, were characterized by polymerase chain reaction (PCR) and amplified ribosomal DNA restriction analysis (ARDRA) with specific Archaea oligonucleotide primers. The ARDRA technique provided an adequate analysis of the community, revealing the profile of the selected population along the reactor. The biomass activities in the HAIB reactor at the end of the experiments indicated the development of PCP degraders and the maintenance of the population of methanogenic Archaea, ensuring the high efficiency of the system treating PCP with added methanol as the cosubstrate. The use of the simplified ARDRA method enabled us to monitor the microbial population with the addition of high concentrations of toxic compounds and highlighting a selection of microorganisms in the biofilm.     

Versatility of fluorene metabolite (phenol) in fluorene biodegradation by a sulfate reducing culture

Biodegradability of fluorene and the versatility of fluorene metabolite (i.e. phenol) in fluorene biodegradation by a sulfate-reducing enrichment culture were investigated. Batch experiments (with 5 mg l⁻¹ fluorene) were designed via the central composite design to examine the effects of sulfate (5-35 mM) and biomass (5-50 mg l⁻¹) concentrations (variables) on fluorene degradation (response). The experimental results revealed that fluorene removal was more influenced by the biomass concentration than the sulfate concentration. The optimal sulfate and biomass concentrations for fluorene biodegradation (90% removal) were found to be 14.4 mM and 37.8 mg l⁻¹, respectively. Under the optimal conditions, a set of biodegradation experiments were repeated to evaluate both the biodegradability of fluorene metabolite and the potential effect of phenol accumulation on fluorene degradation. The outcomes indicated a slow phenol degradation rate, i.e. 0.02 mg l⁻¹ d⁻¹. Moreover, a small reduction in the fluorene biodegradation efficiency was observed in the presence and accumulation of phenol. However, this sulfate reducing culture is a valuable resource for the simultaneous degradation of fluorene and phenol.     

Cultivation of shear stress sensitive microorganisms in disposable bag reactor systems

Technical scale (≥5 l) cultivations of shear stress sensitive microorganisms are often difficult to perform, as common bioreactors are usually designed to maximize the oxygen input into the culture medium. This is achieved by mechanical stirrers, causing high shear stress. Examples for shear stress sensitive microorganisms, for which no specific cultivation systems exist, are many anaerobic bacteria and fungi, such as basidiomycetes. In this work a disposable bag bioreactor developed for cultivation of mammalian cells was investigated to evaluate its potential to cultivate shear stress sensitive anaerobic Eubacterium ramulus and shear stress sensitive basidiomycetes Flammulina velutipes and Pleurotus sapidus. All cultivations were compared with conventional stainless steel stirred tank reactors (STR) cultivations. Good growth of all investigated microorganisms cultivated in the bag reactor was found. E. ramulus showed growth rates of μ = 0.56 h⁻¹ (bag) and μ = 0.53 h⁻¹ (STR). Differences concerning morphology, enzymatic activities and growth in fungal cultivations were observed. In the bag reactor growth in form of small, independent pellets was observed while STR cultivations showed intense aggregation. F. velutipes reached higher biomass concentrations (21.2 g l⁻¹ DCW vs. 16.8 g l⁻¹ DCW) and up to 2-fold higher peptidolytic activities in comparison to cell cultivation in stirred tank reactors.     

Performance evaluation and phylogenetic characterization of anaerobic fluidized bed reactors using ground tire and pet as support materials for biohydrogen production

This study evaluated two different support materials (ground tire and polyethylene terephthalate [PET]) for biohydrogen production in an anaerobic fluidized bed reactor (AFBR) treating synthetic wastewater containing glucose (4000 mg L⁻¹). The AFBR, which contained either ground tire (R1) or PET (R2) as support materials, were inoculated with thermally pretreated anaerobic sludge and operated at a temperature of 30 °C. The AFBR were operated with a range of hydraulic retention times (HRT) between 1 and 8 h. The reactor R1 operating with a HRT of 2 h showed better performance than reactor R2, reaching a maximum hydrogen yield of 2.25 mol H₂ mol⁻¹ glucose with 1.3 mg of biomass (as the total volatile solids) attached to each gram of ground tire. Subsequent 16S rRNA gene sequencing and phylogenetic analysis of particle samples revealed that reactor R1 favored the presence of hydrogen-producing bacteria such as Clostridium, Bacillus, and Enterobacter.     

Biosorption and biodegradation of pentachlorophenol (PCP) in an upflow anaerobic sludge blanket (UASB) reactor

In order to understand the fate of PCP in upflow anaerobic sludge blanket reactor (UASB) more completely, the sorption and biodegradation of pentachlorophenol (PCP) by anaerobic sludge granules were investigated. The anaerobic granular sludge degrading PCP was formed in UASB reactor, which was seeded with anaerobic sludge acclimated by chlorophenols. At the hydraulic retention time (HRT) of 20–22 h, and PCP loading rate of 200–220 mg l⁻¹ d⁻¹, UASB reactor exhibited good performance in treating wastewater which containing 170–180 mg l⁻¹ PCP and the PCP removal rate of 99.5% was achieved. Sequential appearance of tetra-, tri-, di-, and mono-chlorophenol was observed in the reactor effluent after 20 mg l⁻¹ PCP introduction. Sorption and desorption of PCP on the anaerobic sludge granules were all fitted to the Freundlich isotherm equation. Sorption of PCP was partly irreversible. The Freundlich equation could describe the behavior of PCP amount sorbed by granular sludge in anaerobic reactor reasonably well. The results demonstrated that the main mechanism leading to removal of PCP on anaerobic granular sludge was biodegradation, not sorption or volatization.     

Denitrifying sulfide removal and carbon methanogenesis in a mesophilic, methanogenic culture

The inhibitory effects of 90-189 mg l⁻¹ of sulfide and 25-75 mg-N l⁻¹ of nitrate on methanogenesis were investigated in a mixed methanogenic culture using butyrate as carbon source. In the initial phase of 90 mg l⁻¹ S²⁻ test, autotrophic denitrification of nitrate occurred with sulfide as the electron donor. Then the sulfate-reducing strains converted the produced sulfur back to sulfide via heterotrophic oxidation pathway. Methanogenesis was not markedly inhibited when 90 mg l⁻¹ of sulfide was dosed alone. When 25-75 mg-N l⁻¹ of nitrate was presented, initiation of methanogenesis was seriously delayed. Nitrogen oxides (NO_x), the intermediates for nitrate reduction via denitrification pathway, inhibited methanogenesis. The 90 mg l⁻¹ of sulfide favored heterotrophic dissimilatory nitrate reduction to ammonia (DNRA) pathway for nitrate reduction. Possible ways of maximizing methane production from an organic carbon-rich wastewater with high levels of sulfide and nitrate were discussed.     

Temperature dependent (37-15°C) anaerobic digestion of a trichloroethylene-contaminated wastewater

The impact of a trichloroethylene (TCE) contaminated wastewater on the microbial community structure of an anaerobic granular biomass at 15 °C compared to 37 °C was investigated. Four expanded granular sludge bed (EGSB) bioreactors (R1-R4) were employed in pairs at 37 and 15 °C. The influents of one of each pair were supplemented with increasing concentrations of TCE (max. 60 mg l⁻¹). At 37 °C, stable operation was maintained with 88% COD removal and >99% TCE removal at maximum influent TCE concentrations. R3 performance decreased at influent TCE concentration of 60 mg l⁻¹, although TCE removal rates of >97% were recorded. Archaeal community analysis via clone library and quantitative polymerase chain reaction (qPCR) analysis, and bacterial community analysis via denaturing gradient gel electrophoresis (DGGE), indicated that temperature resulted in a greater change in community structure than the presence of TCE, and clones related to cold adaptation of biomass were identified at 15 °C.     

Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500

The acid biocoagulants produced from non-sterile lactic acid fermentation by Lactobacillus casei TISTR 1500 were used to settle colloidal protein, mainly casein, at the isoelectric point in dairy effluent prior to secondary treatment. High concentration of azo dye (Ponceau 4R) in the dairy wastewater and the stress of starvation decreased the efficiencies of the micro-aerobic SBR. Consequently, low casein recovery obtained and organic removal suffered a decline. The number of lactic acid bacteria (LAB) also declined from log 7.4 to log 5.30 in the system fed with 400 mg L⁻¹ of the dye containing wastewater. The recovery of the system, however, showed that 25,000 mg COD L⁻¹ influent with 200 mg L⁻¹ of the dye maintained the growth of LAB in the range of log 7.74–8.12, with lactic and acetic production (2597 and 197 mg L⁻¹) and 83% protein removal. The results in this study suggested that the inhibitory effects were compensated with high organic content feeding.     

Sulfide enhances methanogenesis in nitrate-containing methanogenic cultures

The effects of sulfide on nitrate reduction and methanogenesis using butyrate as a carbon source were investigated in a mixed mesophilic, methanogenic culture. In the sulfide-free medium, 25-75 mg l⁻¹ nitrate markedly inhibited the efficiencies of acetogenesis and methanogenesis processes. Adding 25 mg-S l⁻¹ increased methane production in nitrate-amended medium. Low sulfide levels shifted the nitrate reduction pathway from denitrification to dissimilatory nitrate reduction to ammonia (DNRA), thereby reducing the amounts of toxic nitric oxide and nitrous oxide produced that inhibit methanogenesis. The dose of 25 mg l⁻¹ sulfide was oxidized completely, during which heterotrophic DNRA predominated. The oxidized forms of sulfide reformed, limiting induction of the heterotrophic denitrification pathway. The actions of heterotrophic and autotrophic DNRA bacteria, denitrifiers, sulfate-reducing bacteria and methanogens mitigate nitrate toxicity during methanogenesis in an anaerobic process.     

An in vitro propagation protocol of two submerged macrophytes for lake revegetation in east China

Thirty-six programs have been set up to revegetate the degraded lake wetlands in east China since 2002. Most projects however faced deficiency of submerged macrophyte propagules. To solve the problem, alternative seedling sources must be found besides traditional field collection. This paper deals with an in vitro propagation protocol for two popularly used submerged macrophytes, Myriophyllum spicatum L. and Potamogeton crispus L. Full strength Murashige and Skoog-based liquid media (MS) plus 3% sucrose in addition to 0–2.0 mg l⁻¹ 6-benzylaminopurine (BA) and 0–1.0 mg l⁻¹ indoleacetic acid (IAA) were tried for shoot regeneration. Meanwhile, full, half or quarter strength MS in addition to 0, 0.1 or 0.2 mg l⁻¹ naphthaleneacetic acid (NAA) were tested for root induction, respectively. Results indicated that both species had the ability of regeneration from stem fragments in MS without further regulators. However, the addition of 2.0 mg l⁻¹ BA with 0.2 or 1.0 mg l⁻¹ IAA in MS drastically stimulated the regeneration efficiency of M. spicatum, while the addition of 2.0 mg l⁻¹ BA with 0.2 or 0.5 mg l⁻¹ IAA in MS significantly stimulated that of P. crispus. For root induction, full strength MS in combination with 0.1or 0.2 mg l⁻¹ NAA was preferred by M. spicatum, and the same MS without or with 0.1 mg l⁻¹ NAA was preferred by P. crispus. Seedlings of each species produced from tissue culture room had a 100% survival rate on clay, sandy loam or their mixture (1:1) in an artificial pond, and phenotypic plasticity was exhibited when the nutrient levels varied among the three types of sediments. This acclimation of seedlings helped develop the shoot and root systems, which ensured seedling quality and facilitated the transplantation. Our study has established an effective protocol to produce high quality seedlings for lake revegetation programs at a larger scale. Since the two species we tested represent different regeneration performances in nature but shared similar in vitro propagation conditions, this study has indicated a potentially wide use of the common media for preparing seedlings of other submerged macrophytes.     

Evaluation of the microbial diversity in a horizontal-flow anaerobic immobilized biomass reactor treating linear alkylbenzene sulfonate

The purpose of this work was to assess the degradation of linear alkylbenzene sulfonate (LAS) in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor. The reactor was filled with polyurethane foam where the sludge from a sanitary sewage treatment was immobilized. The hydraulic detention time (HDT) used in the experiments was of 12 h. The reactor was fed with synthetic substrate (410 mg l⁻¹ of meat extract, 115 mg l⁻¹ of starch, 80 mg l⁻¹ of saccharose, 320 mg l⁻¹ of sodium bicarbonate and 5 ml l⁻¹ of salt solution) in the following stages of operation: SI—synthetic substrate, SII—synthetic substrate with 7 mg l⁻¹ of LAS, SIII—synthetic substrate with 14 mg l⁻¹ of LAS and SIV—synthetic substrate containing yeast extract (substituting meat extract) and 14 mg l⁻¹ of LAS, without starch. At the end of the experiment (313 days) a degradation of ∼35% of LAS was achieved. The higher the concentration of LAS, the greater the amount of foam for its adsorption. This is necessary because the isotherm of LAS adsorption in the foam is linear for the studied concentrations (2 to 50 mg l⁻¹). Microscopic analyses of the biofilm revealed diverse microbial morphologies, while Denaturing Gradient Gel Eletrophoresis (DGGE) profiling showed variations in the population of total bacteria and sulphate-reducing bacteria (SRB). The 16S rRNA gene sequencing and phylogenetic analyses revealed that the members of the order Clostridiales were the major components of the bacterial community in the last reactor operation step.     

Biomass production and nitrogen and phosphorus removal by the green alga Neochloris oleoabundans in simulated wastewater and secondary municipal wastewater effluent

Biomass productivity of 350 mg DCW L⁻¹ day⁻¹ with a final biomass concentration of 3.15 g DCW L⁻¹ was obtained with Neochloris oleoabundans grown in artificial wastewater at sodium nitrate and phosphate concentrations of 140 and 47 mg L⁻¹, respectively, with undetectable levels of residual N and P in effluents. In secondary municipal wastewater effluents enriched with 70 mg N L⁻¹, the alga achieved a final biomass concentration of 2.1 g DCW L⁻¹ and a biomass productivity of 233.3 mg DCW L⁻¹ day⁻¹. While N removal was very sensitive to N:P ratio, P removal was independent of N:P ratio in the tested range. These results indicate that N. oleoabundans could potentially be employed for combined biofuel production and wastewater treatment.     

Anaerobic biodegradation of pentachlorophenol in a fixed-film reactor inoculated with polluted sediment from Santos–São Vicente Estuary,Brazil

This paper discusses the results of pentachlorophenol (PCP) anaerobic biodegradation in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor operated under methanogenic and halophylic conditions. The system was inoculated with autochthonous microorganisms taken from a site in the Santos-São Vicente Estuary (state of São Paulo, Brazil) severely contaminated with PCP, phenolic compounds, polychlorinated biphenyls, polycyclic aromatic hydrocarbons, and heavy metals. The inoculum was previously enriched for methanogenesis activity by changing glucose concentrations and under halophylic condition. PCP was added to the HAIB reactor as sodium salt (NaPCP) at an initial concentration of 5 mg l^?1 and increased to 13, 15, and 21 mg l^?1. Organic matter removal efficiency ranged from 77 to 100%. PCP removal efficiency was 100%. Denaturing gradient gel electrophoresis profile showed changes in the structure of Bacteria domain, which was associated with NaPCP and glucose amendments. The diversity of Archaea remained unaltered during the different phases. Scanning electron microscope examinations showed that cells morphologically resembling Methanosarcina and Methanosaeta predominated in the biofilm. These cells were detected by fluorescence in situ hybridization with the Methanosarcinales (MSMX860) specific probe. The results are of great importance in planning the estuary’s restoration by using anaerobic technology and autochthonous microorganisms for bioremediation.     

Saline adaptation of granules in mesophilic UASB reactors

We exposed mesophilic up-flow anaerobic sludge blanket (UASB) reactors to high concentrations of NaCl to elucidate the saline adaptation capacity of their granular sludge. We operated 10 lab-scale UASB reactors at 37 °C and added NaCl to the influent either abruptly or gradually. With abrupt addition, NaCl concentrations were increased from 0 g L⁻¹ to 20, 30, 35, 40, 45, or 50 g L⁻¹. With gradual addition, the NaCl concentrations were gradually increased from 0 to 64 g L⁻¹ or 0 to 40 g L⁻¹. We successfully saline-adapted the granules up to 32 g NaCl L⁻¹, while maintaining high reactor performance, suggesting that 32 g NaCl L⁻¹ is a practical level for system operation. In the UASB reactors gradually exposed to 32 g L⁻¹ NaCl, methane production decreased by only 13%. We also learned that combining abrupt and gradual salinity increases could shorten the adaptation period. Thus we were able to shorten the adaptation period to only 30 days by increasing the salinity abruptly to 20 g L⁻¹, followed by gradual adaptation to 30 g NaCl L⁻¹.     

Performance of a pilot-scale sewage treatment: an up-flow anaerobic sludge blanket (UASB) and a down-flow hanging sponge (DHS) reactors combined system by sulfur-redox reaction process under low-temperature conditions

Performance of a wastewater treatment system utilizing a sulfur-redox reaction of microbes was investigated using a pilot-scale reactor that was fed with actual sewage. The system consisted of an up-flow anaerobic sludge blanket (UASB) reactor and a down-flow hanging sponge (DHS) reactor with a recirculation line. Consequently, the total COD_Cr (465 ± 147 mg L⁻¹; total BOD of 207 ± 68 mg L⁻¹) at the influent was reduced (70 ± 14 mg L⁻¹; total BOD of 9 ± 2 mg L⁻¹) at the DHS effluent under the conditions of an overall hydraulic retention time of 12 h, a recirculation ratio of 2, and a low-sewage temperature of 7.0 ± 2.8 °C. A microbial analysis revealed that sulfate-reducing bacteria contributed to the degradation of organic matter in the UASB reactor even in low temperatures. The utilized sulfur-redox reaction is applicable for low-strength wastewater treatment under low-temperature conditions.     

Biological kinetics evaluation of anaerobic stabilization pond treatment of palm oil mill effluent

Biological kinetic (bio-kinetic) study of the anaerobic stabilization pond treatment of palm oil mill effluent (POME) was carried out in a laboratory anaerobic bench scale reactor (ABSR). The reactor was operated at different feed flow-rates of 0.63, 0.76, 0.95, 1.27, 1.9 and 3.8 l of raw POME for a day. Chemical oxygen demand (COD) as influent substrates was selected for bio-kinetic study. The investigation showed that the growth yield (Y_G), specific biomass decay (b), maximum specific biomass growth rate (μ_max), saturation constant (K_s) and critical retention time (Θ_c) were in the range of 0.990 g VSS/g COD_removed day, 0.024 day⁻¹, 0.524 day⁻¹, 203.433 g COD l⁻¹ and 1.908 day, respectively.