Dead-end ultrafiltration concentration and IMS/ATP-bioluminescence detection of Escherichia coli O157:H7 in recreational water and produce wash

The purpose of this study was to develop a detection method for viable E. coli O157:H7 in fresh produce and recreational water. The method was evaluated using eight samples of produce wash and recreational water with or without spiked E. coli O157:H7 at ≤ 10² CFU·ml^− 1 and concentrated using dead-end ultrafiltration (DEUF) to produce primary and secondary retentates. Fifty-four matrix replicates of undiluted secondary retentates or dilutions (1:2 or 1:10 in buffer) were evaluated using an IMS/ATP bioluminescence assay (IMS/ATP). Combining primary and secondary DEUF yielded a 2-4 log₁₀ increase in E. coli O157:H7 concentrations in spiked samples and resulted in signal-to-noise ratios 2-219 fold higher than controls, depending on the sample type. DEUF increased the concentration of E. coli O157:H7 to within the detectable limits of IMS/ATP. The combined assay provided detection of viable E. coli O157:H7 in produce and recreational water. Accurate detection of microbial pathogens using DEUF and IMS/ATP could reduce disease outbreaks from contaminated water sources and food products.     

Quantification of bacterial adherence on different textile fabrics

This research studied the adherent behaviour of gram-negative Escherichia coli on different weft knitted textile fabrics made of cotton, polyester filaments and polyester (staple)-cotton blended yarn. We compared the bacterial adherence of 18-h-old E. coli cells on all the three types of fabrics under the same experimental conditions. The maximum adherence was found in cotton, followed by the polyester blend; the least adherence was in polyester fabrics. Scanning electron micrographs showed that surface morphology of fabrics also plays an important role during adherence. Cotton fabric, with a rough surface, attracted more bacterial cells compared to the smooth polyester surface. Comparing the FTIR spectra of different fabrics and E. coli it was found that both cotton and E. coli have abundant free hydroxyl groups that may interact strongly with each other and with other hydrophilic groups such as carboxyl, phosphate, and amides. This may be one of the reasons for the greater adherence on cotton as compared to hydrophobic polyester fabric. Finally, the effect of bacterial adherence on loss of strength in different fabrics was analysed. It was found that the maximum decrease in strength occurred in cotton fabrics and the least in polyester fabrics. The present study suggests a procedure for quantifying bacterial adherence on different textile fabrics. This technique can be used with different bacterial strains and varieties of fabrics for quantifying the adherent bacterial cells, and would be of great use in developing and comparing different antimicrobial finished products of the textile industry.     

Immobilization of Escherichia coli Cells by Use of the Antimicrobial Peptide Cecropin P1

An immobilization scheme for bacterial cells is described, in which the antimicrobial peptide cecropin P1 was used to trap Escherichia coli K-12 and O157:H7 cells on microtiter plate well surfaces. Cecropin P1 was covalently attached to the well surfaces, and E. coli cells were allowed to bind to the peptide-coated surface. The immobilized cells were detected colorimetrically with an anti-E. coli antibody-horseradish peroxidase conjugate. Binding curves were obtained in which the signal intensities were dependent upon the cell concentration and upon the amount of peptide attached to the well surface. After normalization for the amount of peptide coupled to the surface and the relative binding affinity of the antibody for each strain, the binding data were compared, which indicated that there was a strong preference for E. coli O157:H7 over E. coli K-12. The cells could be immobilized reproducibly at pH values ranging from 5 to 10 and at ionic strengths up to 0.50 M.     

GroEL/GroES chaperone and Lon protease regulate expression of the Vibrio fischeri lux operon in Escherichia coli

Chaperone GroEL/GroES and Lon protease were shown to play a role in regulating the expression of the Vibrio fischeri lux operon cloned in Escherichia coli cells. The E. coli groE mutant carrying a plasmid with the full-length V. fischeri lux regulon showed a decreased bioluminescence. The bioluminescence intensity was high in E. coli cells with mutant lonA and the same plasmid. Bioluminescence induction curves lacked the lag period characteristic of lon ⁺ strains. Regulatory luxR of V. fischeri was cloned in pGEX-KG to produce the hybrid gene GST-luxR. The product of its expression, GST-LuxR, was isolated together with GroEL and Lon upon affinity chromatography on a column with glutathione-agarose, suggesting complexation of LuxR with these proteins. It was assumed that GroEL/GroES is involved in LuxR folding, while Lon protease degrades LuxR before its folding into an active globule or after denaturation.     

Simultaneous filtration and immobilization of cells from a flowing suspension using a bioreactor containing polyethylenimine coated cotton threads: Application in the continuous inversion of concentrated sucrose syrups

Polyethylenimine(PEI)-coated cotton threads were shown to have potential for reducing microbial load from a flowing suspension. Turbid cell suspensions perfused through the PEI column appeared as totally clear in the effluent. The adhesion efficiency of the matrix was found to depend on the concentration of PEI used to treat the threads. Threads coated with 2.5% PEI were found to show optimal retention of cells. A considerable amount of binding was seen over a broad range of ionic concentration (0–0.3 M) and pH (3.6–10.3). Under similar conditions control threads did not show any filtration capacity. Saccharomyces cerevisiae, Saccharomyces fragilis, Escherichia coli and an Acetobacter species could be effectively filtered using PEI-coated threads. This technique can find potential for the simultaneous filtration and immobilization of cells in a bioreactor to be used in continuous bioprocessing as exemplified for the inversion of sucrose syrups using baker's yeast. The bioreactor could continuously hydrolyse 60% (w/v) sucrose syrups with a productivity of 2.25 kg/day for over a month without loss in efficiency.     

Effects of surface treatment and process parameters on immobilization of recombinant yeast cells by adsorption to fibrous matrices

The effects of surface properties of Saccharomyces cerevisiae strains 468/pGAC9 and 468 on adhesion to polyethyleneimine (PEI) and/glutaraldehyde (GA) pre-treated cotton (CT), polyester (PE), polyester + cotton (PECT), nylon (NL), polyurethane foam (PUF), and cellulose re-enforced polyurethane (CPU) fibers were investigated. Process parameters (circulation velocity, pH, ionic strength, media composition and surfactants) were also examined. 80%, 90%, and 35% of the cells were adsorbed onto unmodified CT, PUF, and PE, respectively. PEI-GA pre-treated CT and alkali treated PE yielded 25% and 60% cell adhesion, respectively. Adsorption rate (K_a) ranged from 0.06 to 0.17 for CT and 0.06-0.16 for PE at varied pH. Adhesion increased by 15% in the presence of ethanol, low pH and ionic strength, and decreased by 23% in the presence of yeast extract and glucose. Shear flow and 1% Triton X-100 detached 62% and 36% nonviable cells from PE and CT, respectively, suggesting that cell immobilization in fibrous-bed bioreactors can be controlled to optimize cell density for long-term stability.     

A simple bacterial transformation method using magnesium- and calcium-aminoclays

An efficient and user-friendly bacterial transformation method by simple spreading cells with aminoclays was demonstrated. Compared to the reported transformation approaches using DNA adsorption or wrapping onto (in)organic fibers, the spontaneously generated clay-coated DNA suprastructures by mixing DNA with aminoclay resulted in transformants in both Gram-negative (Escherichia coli) and Gram-positive cells (Streptococcus mutans). Notably, the wild type S. mutans showed comparable transformation efficiency to that of the E. coli host for recombinant DNA cloning. This is a potentially promising result because other trials such as heat-shock, electroporation, and treatment with sepiolite for introducing DNA into the wild type S. mutans failed. Under defined conditions, the transformation efficiency of E. coli XL1-Blue and S. mutans exhibited ~ 2 × 10⁵ and ~ 6 × 10³ CFU/μg of plasmid DNA using magnesium-aminoclay. In contrast, transformation efficiency was higher in S. mutans than that in E. coli XL1-Blue for calcium-aminoclay. It was also confirmed that each plasmid transformed into E. coli and S. mutans was stably maintained and that they expressed the inserted gene encoding the green fluorescent protein during prolonged growth of up to 80 generations.     

A Stable Bioluminescent Construct of Escherichia coli O157:H7 for Hazard Assessments of Long-Term Survival in the Environment

A chromosomally lux-marked (Tn5 luxCDABE) strain of nontoxigenic Escherichia coli O157:H7 was constructed by transposon mutagenesis and shown to have retained the O157, H7, and intimin phenotypes. The survival characteristics of this strain in the experiments performed (soil at −5, −100, and −1,500 kPa matric potential and artificial groundwater) were indistinguishable from the wild-type strain. Evaluation of potential luminescence was found to be a rapid, cheap, and quantitative measure of viable E. coli O157:H7 Tn5 luxCDABE populations in environmental samples. In the survival studies, bioluminescence of the starved populations of E. coli O157:H7 Tn5 luxCDABE could be reactivated to the original levels of light emission, suggesting that these populations remain viable and potentially infective to humans. The attributes of the construct offer a cheap and low-risk substitute to the use of verocytotoxin-producing E. coli O157:H7 in long-term survival studies.     

Biocatalytically active silCoat-composites entrapping viable Escherichia coli

Application of whole cells in industrial processes requires high catalytic activity, manageability, and viability under technical conditions, which can in principle be accomplished by appropriate immobilization. Here, we report the identification of carrier material allowing exceptionally efficient adsorptive binding of Escherichia coli whole cells hosting catalytically active carbonyl reductase from Candida parapsilosis (CPCR2). With the immobilizates, composite formation with both hydrophobic and hydrophilized silicone was achieved, yielding advanced silCoat-material and HYsilCoat-material, respectively. HYsilCoat-whole cells were viable preparations with a cell loading up to 400 mg_{E. coli}?·?g^?1 _carrier and considerably lower leaching than native immobilizates. SilCoat-whole cells performed particularly well in neat substrate exhibiting distinctly increased catalytic activity.     

Assessment of Photodynamic Destruction of Escherichia coli O157:H7 and Listeria monocytogenes by Using ATP Bioluminescence

Antimicrobial photodynamic therapy was shown to be effective against a wide range of bacterial cells, as well as for fungi, yeasts, and viruses. It was shown previously that photodestruction of yeast cells treated with photosensitizers resulted in cell destruction and leakage of ATP. Three photosensitizers were used in this study: tetra(N-methyl-4-pyridyl)porphine tetratosylate salt (TMPyP), toluidine blue O (TBO), and methylene blue trihydrate (MB). A microdilution method was used to determine MICs of the photosensitizers against both Escherichia coli O157:H7 and Listeria monocytogenes. To evaluate the effects of photodestruction on E. coli and L. monocytogenes cells, a bioluminescence method for detection of ATP leakage and a colony-forming assay were used. All tested photosensitizers were effective for photodynamic destruction of both bacteria. The effectiveness of photosensitizers (in microgram-per-milliliter equivalents) decreased in the order TBO > MB > TMPyP for both organisms. The MICs were two- to fourfold higher for E. coli O157:H7 than for L. monocytogenes. The primary effects of all of the photosensitizers tested on live bacterial cells were a decrease in intracellular ATP and an increase in extracellular ATP, accompanied by elimination of viable cells from the sample. The time courses of photodestruction and intracellular ATP leakage were different for E. coli and L. monocytogenes. These results show that bioluminescent ATP-metry can be used for investigation of the first stages of bacterial photodestruction.

     

Purification of Lac repressor protein using polymer displacement and immobilization of the protein

Lac repressor protein was purified from E. coli BMH8117 harboring plasmid pWB1000 and E. coli K₁₂BMH 71-18 strains. Displacement of the protein with poly(ethyleneimine) (PEI) from phosphocellulose cation exchange column was shown to be an effective elution strategy. It resulted in better recoveries and sharper elution profiles than traditional salt elution without effecting the purity of the protein. The elution is assumed to proceed via displacement of bound protein by PEI when the polymer binds to the ion exchanger. The minor impurities in the protein solution were finally removed by chromatography on immobilized metal affinity column. The repressor protein undergoes distinct conformational changes upon addition of specific inducer isopropyl--D-thiogalactoside (IPTG), which is evidenced by changes in ultraviolet absorption spectrum. The protein was immobilized covalently to the Sepharose matrix. The intact biological activity of the protein after immobilization was shown by binding of genomic DNA and lac operator plasmid DNA from E. coli to the immobilized lac repressor.     

Effects of Common Forage Phenolic Acids on Escherichia coli O157:H7 Viability in Bovine Feces

Ruminant animals are carriers of Escherichia coli O157:H7, and the transmission of E. coli O157:H7 from cattle to the environment and to humans is a concern. It is unclear if diet can influence the survivability of E. coli O157:H7 in the gastrointestinal system or in feces in the environment. Feces from cattle fed bromegrass hay or corn silage diets were inoculated with E. coli O157:H7, and the survival of this pathogen was analyzed. When animals consumed bromegrass hay for <1 month, viable E. coli O157:H7 was not recovered after 28 days postinoculation, but when animals consumed the diet for >1 month, E. coli O157:H7 cells were recovered for >120 days. Viable E. coli O157:H7 cells in feces from animals fed corn silage were detected until day 45 and differed little with the time on the diet. To determine if forage phenolic acids affected the viability of E. coli O157:H7, feces from animals fed corn silage or cracked corn were amended with common forage phenolic acids. When 0.5% trans-cinnamic acid or 0.5% para-coumaric acid was added to feces from silage-fed animals, the E. coli O157:H7 death rate was increased significantly (17-fold and 23-fold, respectively) compared to that with no addition. In feces from animals fed cracked corn, E. coli O157:H7 death rates were increased significantly with the addition of 0.1% and 0.5% trans-cinnamic acid (7- and 13-fold), 0.1% and 0.5% p-coumaric acid (3- and 8-fold), and 0.5% ferulic acid (3-fold). These data suggest that phenolic acids common to forage plants can decrease viable counts of E. coli O157:H7 shed in feces.     

Bacteriophage-based biosorbents coupled with bioluminescent ATP assay for rapid concentration and detection of Escherichia coli

Wild type T4 bacteriophage and recombinant T4 bacteriophages displaying biotin binding peptide (BCCP) and cellulose binding module (CBM) on their heads were immobilized on nano-aluminum fiber-based filter (Disruptor™), streptavidin magnetic beads and microcrystalline cellulose, respectively. Infectivity of the immobilized phages was investigated by monitoring the phage-mediated growth inhibition of bioluminescent E. coli B and cell lysis using bioluminescent ATP assay. The results showed that phage immobilization resulted in a partial loss of infectivity as compared with the free phage. Nevertheless, the use of a biosorbent based on T4 bacteriophage immobilized on Disruptor™ filter coupled with a bioluminescent ATP assay allowed simultaneous concentration and detection of as low as 6 × 10³ cfu/mL of E. coli in the sample within 2 h with high accuracy (CV = 1-5% in log scale). Excess of interfering microflora at levels 60-fold greater than the target organism did not affect the results when bacteriophage was immobilized on the filter prior to concentration of bacterial cells.     

Production of thermophilic α-amylase using immobilized transformed Escherichia coli by addition of glycine

Efficient production of thermophilic α-amylase from Bacillus stearothermophilus was investigated using recombinant Escherichia coli HB101/pH1301 immobilized with κ-carrageenan by the addition of glycine. The effects of glycine, the concentrations of κ-carrageenan and KCI on the production of the enzyme as well as the stability of plasmid pHI301 were studied. In the absence of glycine, the enzyme was localized in the periplasmic space of the recombinant E. coli cells and a small amount of the enzyme was liberated in the culture broth. Although the addition of glycine was very effective for release of α-amylase from the periplasm of E. coli entrapped in gel beads, a majority of the enzyme accumulated in the gel matrix. (In this paper, production of the enzyme from recombinant cells to an ambient is expressed by the term “release”, while diffusion-out from gel beads is referred to by the term “liberate”.) Concentrations of KCI and immobilizing support significantly affected on the liberation of α-amylase to the culture broth. Mutants which produced smaller amounts of the enzyme emerged during a successive culture of recombinant E. coli, even under selective pressure, and they predominated in the later period of the passages. The population of plasmid-lost segregants increased with cultivation time. The stability of pHI301 for the free cells was increased by the addition of 2% KCI, which is a hardening agent for carrageenan. Although the viability of cells and α-amylase activity in the beads decreased with cultivation time during the successive culture of the immobilized recombinant E. coli, the plasmid stability was increased successfully by immobilization. Efficient long-term production of α-amylase was attained by an iterative re-activation-liberation procedure using the immobilized recombinant cells. Although the viable cell number, plasmid stability and enzyme activity liberated in the glycine solution decreased at an early period in the cultivation cycles, the process attained steady state regardless of the addition of an antibiotic.     

Assessments of Total and Viable Escherichia coli O157:H7 on Field and Laboratory Grown Lettuce

Leafy green produce has been associated with numerous outbreaks of foodborne illness caused by strains of Escherichia coli O157:H7. While the amounts of culturable E. coli O157:H7 rapidly decline after introduction onto lettuce in the field, it remains to be determined whether the reduction in cell numbers is due to losses in cell viability, cell injury and a subsequent inability to be detected by standard laboratory culturing methods, or a lack of adherence and hence rapid removal of the organism from the plants during application. To assess which of these options is most relevant for E. coli O157:H7 on leafy green produce, we developed and applied a propidium monoazide (PMA) real-time PCR assay to quantify viable (with PMA) and total (without PMA) E. coli O157:H7 cells on growth chamber and field-grown lettuce. E. coli O157:H7, suspended in 0.1% peptone, was inoculated onto 4-week-old lettuce plants at a level of approximately 10⁶ CFU/plant. In the growth chamber at low relative humidity (30%), culturable amounts of the nontoxigenic E. coli O157:H7 strain ATCC 700728 and the virulent strain EC4045 declined 100 to 1000-fold in 24 h. Fewer E. coli O157:H7 cells survived when applied onto plants in droplets with a pipette compared with a fine spray inoculation. Total cells for both strains were equivalent to inoculum levels for 7 days after application, and viable cell quantities determined by PMA real-time PCR were approximately 10⁴ greater than found by colony enumeration. Within 2 h after application onto plants in the field, the number of culturable E. coli ATCC 700728 was reduced by up to 1000-fold, whereas PCR-based assessments showed that total cell amounts were equivalent to inoculum levels. These findings show that shortly after inoculation onto plants, the majority of E. coli O157:H7 cells either die or are no longer culturable.     

Shiga toxins induce autophagic cell death in intestinal epithelial cells via the endoplasmic reticulum stress pathway

Shiga toxins (Stxs) are a family of cytotoxic proteins that lead to the development of bloody diarrhea, hemolytic-uremic syndrome, and central nervous system complications caused by bacteria such as S. dysenteriae, E. coli O157:H7 and E. coli O104:H4. Increasing evidence indicates that macroautophagy (autophagy) is a key factor in the cell death induced by Stxs. However, the associated mechanisms are not yet clear. This study showed that Stx2 induces autophagic cell death in Caco-2 cells, a cultured line model of human enterocytes. Inhibition of autophagy using pharmacological inhibitors, such as 3-methyladenine and bafilomycin A₁, or silencing of the autophagy genes ATG12 or BECN1 decreased the Stx2-induced death in Caco-2 cells. Furthermore, there were numerous instances of dilated endoplasmic reticulum (ER) in the Stx2-treated Caco-2 cells, and repression of ER stress due to the depletion of viable candidates of DDIT3 and NUPR1. These processes led to Stx2-induced autophagy and cell death. Finally, the data showed that the pseudokinase TRIB3-mediated DDIT3 expression and AKT1 dephosphorylation upon ER stress were triggered by Stx2. Thus, the data indicate that Stx2 causes autophagic cell death via the ER stress pathway in intestinal epithelial cells.     

Escherichia coli lipopolysaccharide induces alveolar epithelial cell stiffening

IntroductionApplication of lipopolysaccharide (LPS) is a widely employed model to mimic acute respiratory distress syndrome (ARDS). Available data regarding LPS-induced biomechanical changes on pulmonary epithelial cells are limited only to P. aeruginosa LPS. Considering that LPS from different bacteria could promote a specific mechanical response in epithelial cells, we aim to assess the effect of E. coli LPS, widely employed as a model of ARDS, in the biomechanics of alveolar epithelial cells.MethodsYoung’s modulus (E) of alveolar epithelial cells (A549) was measured by atomic force microscopy every 5 min throughout 60 min of experiment after treatment with LPS from E. coli (100 μg/mL). The percentage of cells presenting actin stress fibers (F-actin staining) was also evaluated. Control cells were treated with culture medium and the values obtained were compared with LPS-treated cells for each time-point.ResultsApplication of LPS induced significant increase in E after 20 min (77%) till 60 min (104%) in comparison to controls. Increase in lung epithelial cell stiffness induced by LPS was associated with a higher number of cells presenting cytoskeletal remodeling.ConclusionsThe observed effects of E. coli LPS on alveolar epithelial cells suggest that this widely-used LPS is able to promote a quick formation of actin stress fibers and stiffening cells, thereby facilitating the disruption of the pulmonary epithelial barrier.     

Enhancing isomaltulose production by recombinant Escherichia coli producing sucrose isomerase: culture medium optimization containing agricultural wastes and cell immobilization

Isomaltulose is a structural isomer of sucrose commercially used in food industries. In this work, recombinant Escherichia coli producing sucrose isomerase (SIase) was used to convert sucrose into isomaltulose. To develop an economical industrial medium, untreated cane molasses (10.63 g l^?1), yeast extract (25.93 g l^?1), and corn steep liquor (10.45 g l^?1) were used as main culture compositions for SIase production. The relatively high SIase activity (14.50 ± 0.11 U mg DCW^?1) was obtained by the recombinant cells. To the best of our knowledge, this is the first investigation on SIase production by engineered E. coli using untreated cane molasses. The recombinant E. coli cells expressing the SIase gene were immobilized in calcium alginate gel in order to improve the efficiency of recycling. The immobilization was most effective with 2 % (w/v) sodium alginate and 3 % (w/v) calcium chloride. The optimal initial biomass for immobilization was 20 % (w/v, wet wt.), with a hardening time of 8 h for cell immobilization. The immobilized E. coli cells exhibited good stability for 30 batches with the productivity of 0.45 g isomaltulose g pellet^?1 h^?1. A continuous isomaltulose formation process using a column reactor remained stable for 40 days with 83 ± 2 % isomaltulose yield, which would be beneficial for economical production of isomaltulose.