Kinetics of hydrogen-dependent denitrification under varying pH and temperature conditions

It is important to determine the effect of changing environmental conditions on the microbial kinetics for design and modeling of biological treatment processes. In this research, the kinetics of nitrate and nitrite reduction by autotrophic hydrogen-dependent denitrifying bacteria and the possible role of acetogens were studied in two sequencing batch reactors (SBR) under varying pH and temperature conditions. A zero order kinetic model was proposed for nitrate and nitrite reduction and kinetic coefficients were obtained at two temperatures (25 +/- 1 and 12 +/- 1 degrees C), and pH ranging from 7 to 9.5. Nitrate and nitrite reduction was inhibited at pH of 7 at both temperatures of 12 +/- 1 and 25 +/- 1 degrees C. The optimum pH conditions for nitrate and nitrite reduction were 9.5 at 25 +/- 1 degrees C and 8.5 at 12 +/- 1 degrees C. Nitrate and nitrite reduction rates were compared, when they were used separately as the sole electron acceptor. It was shown that nitrite reduction rates consistently exceeded nitrate reduction rates, regardless of temperature and pH. The observed transitional accumulation of nitrite, when nitrate was used as an electron acceptor, indicated that nitrite reduction was slowed down by the presence of nitrate. No activity of acetogenic bacteria was observed in the hydrogenotrophic biomass and no residual acetate was detected, verifying that the kinetic parameters obtained were not influenced by heterotrophic denitrification and accurately represented autotrophic activity.     

Dynamic light scattering studies on hydrodynamic properties of fibrinogen-fibronectin complex.

A high molecular weight 'cryogel' was obtained as insoluble complexes by cold incubation at near-freezing temperatures from heparinized plasma of patients with rheumatoid arthritis. After the cryogel was solubilized at 37 degrees C, 1:1 complex of fibrinogen and fibronectin was purified at room temperature by affinity chromatography on a gelatin-Sepharose 4B. Hydrodynamic properties of the complex were investigated as a function of temperature and NaCl concentration using a dynamic light scattering. The diffusion coefficients of the complex at 20 degrees C decreased with increasing of NaCl concentration as free fibronectin. The complex appears to be a more compact form at low ionic concentration, which is associated with conformational changes of fibronectin. The diffusion coefficient of the complex at 20 degrees C in 0.05 M TrisHCl(pII7.4) containing 0.5 M NaCl was estimated as 8.5 x 10(-8) cm2s-1. The complex did not dissociate over the temperature range from 20 to 37 degrees C. The diffusion coefficients of the complex decreased significantly at 12 degrees C and 40 degrees C. The thermal denaturation of fibrinogen molecule in the complex was observed at 40 degrees C. The CONTIN analysis of the light scattering data showed that the complex associated to form higher aggregates at 15 degrees C, but not at near-freezing temperature. The equilibrium between the complex and higher aggregates appeared reversible.     

Dynamic light scattering investigations of human erythrocyte spectrin.

Dynamic light scattering measurements were performed on spectrin from human erythrocytes in 25 mM Tris buffer at pH 7.6 with 100 mM NaCl and 5 mM EDTA. Measurements were made on spectrin solutions prepared as dimers and tetramers over the temperature range from 23 to 41 degrees C, as a function of the square of the scattering vector (K2) over the range of 0.7 x 10(10) cm-2 less than or equal to K1 less than or equal to 20 x 10(10) cm-2. Analysis of the autocorrelation functions collected for these solutions revealed the presence of two predominant motional components over the entire range of K2. Plots of the diffusion coefficients (D20) of these components, with viscosity and temperature corrected to water at 20 degrees C, as a function of K2 indicated three rather distinct regions, flat regions at low and high K2 joined by a sloping intermediate region. At small K2 (less than or equal to 4 x 10(10) cm-2) the D20 values were (7.3 +/- 2.0) x 10(-8) cm2/s for the slow component and (20.3 +/- 2.0) x 10(-8) cm2/s for the fast component. At large K2 (greater than or equal to 10 x 10(10) cm-2) the values increased to (13.0 +/- 2.0) x 10(-8) cm2/s for the slow component and (39.4 +/- 2.0) x 10(-8) cm2/s for the fast component. In the intermediate K2 region, D20 is a linear function of K2 and appears as a transition between the low and high K2 regions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of temperature on emergence, survival and infectivity of cercariae of the marine trematode Renicola roscovita (Digenea: Renicolidae)

Marine bivalves harbour a diversity of trematode parasites affecting population and community dynamics of their hosts. Although ecologically and economically important, factors influencing transmission between first (snail) and second (bivalve) intermediate hosts have rarely been studied in marine systems. In laboratory experiments, the effect of temperature (10, 15, 20, 25 degrees C) was investigated on (1) emergence from snails, (2) survival outside hosts and (3) infectivity in second intermediate hosts of cercariae of the trematode Renicola roscovita (Digenea: Renicolidae), a major parasite in North Sea bivalves. Emergence of cercariae peaked at 20 degrees C (2609 +/- 478 cercariae snail(-1) 120 h(-1)) and was considerably lower at 10 degrees C (80 +/- 79), 15 degrees C (747 +/- 384) and 25 degrees C (1141 +/- 334). Survival time decreased with increasing temperature, resulting in 50% mortality of the cercariae after 32.8 +/- 0.6 h (10 degrees C), 26.8 +/- 0.8 h (15 degrees C), 20.2 +/- 0.5 h (20 degrees C) and 16.6 +/- 0.3 h (25 degrees C ). Infectivity of R. roscovita cercariae in cockles Cerastoderma edule increased with increasing temperature and was highest at 25 degrees C (42.6 +/- 3.9%). However, mesocosm experiments with infected snails and cockle hosts in small aquaria, integrating cercarial emergence, survival and infectivity, showed highest infection of cockles at 20 degrees C (415 +/- 115 metacercariae host(-1)), indicating 20 degrees C to be the optimum temperature for transmission of this species. A field experiment showed metacercariae of R. roscovita to appear in C. edule with rising water temperature in April; highest infection rates were in August, when the water temperature reached 20 degrees C. Since another trematode species (Himasthla elongata; Digenea: Echinostomatidae) occurring at the experimental site showed a similar temporal pattern, trematode transmission to second intermediate bivalve hosts may peak during especially warm (> or = 20 degrees C) summers in the variable climate regime of the North Sea.     

Matrix bound phosphine formation and depletion in eutrophic lake sediment fermentation-simulation of different environmental factors

Closed anaerobic batch-fermentation of eutrophic lake sediment samples was performed under variation of four environmental fermentation factors (pH, temperature, water/sediment ratio and disturbance) to learn how the quantity of phosphine will change and if the quantity of phosphine can increase. The fermentation conditions where matrix bound phosphine (MBP) increased (doubled from 3193+/-520 to about 7982+/-1003 ng/kg) were: a pH of 8 and of 10 (as compared to 1, 2, 4, 6, 12), a temperature of 20 and 30 degrees C (as compared to 4 and 40 degrees C), a water/sediment ratio of 3:1 (as compared to 1:1, 2:1, 5:1) and a disturbance of 100 r/min (as compared to 0 r/min), respectively. Although, over the full time course of fermentation, the balance of phosphine production became negative again or did remain almost unchanged under most conditions. A pH of 1 or disturbance of 150 r/min was significant factors to decrease phosphine over the long term. Free phosphine had been detected but was of minor importance (in the order of 60.9+/-10.1 ng/m(3)). Overall, the fermentation conditions which had been most favorable for microbial life (moderate temperature (20 and 30 degrees C) and pH 8) were also most favorable for a positive phosphine balance. This is an indication, but no biochemical proof that a natural (biogenic, microbial, biochemical) NET PRODUCTION of phosphine or DE NOVO PRODUCTION of phosphine has occurred. MBP concentrations in lake sediments were discussed as to be strongly dependent on a balance of natural generation and depletion processes, dependent of the simulated parameters.     

On measuring the diffusional water permeability of human red blood cells and ghosts by nuclear magnetic resonance

The characteristics of water diffusional permeability (P) of human red blood cells were studied on isolated erythrocytes and ghosts by a doping nuclear magnetic resonance technique. In contrast to all previous investigations, systematic measurements were performed on blood samples obtained from a large group of donors. The mean values of P ranged from 2.2 X 10(-3) cm.s-1 at 5 degrees C to 8.1 X 10(-3) cm.s-1 at 42 degrees C. The reasons for some of the discrepancies in the permeability coefficients reported by various authors were found. In order to estimate the basal permeability, the maximal inhibition of water diffusion was induced by exposure of red blood cells to p-chloromercuribenzenesulfonate (PCMBS) under various conditions (concentration, duration, temperature). The lowest values of P were around 1.3 X 10(-3) cm.s-1 at 20 degrees C, 1.6 X 10(-3) cm.s-1 at 25 degrees C, 1.9 X 10(-3) cm.s-1 at 30 degrees C and 3.2 X 10(-3) cm.s-1 at 37 degrees C. The results reported here represent the largest series of determinations of water diffusional permeability of human red blood cells (without or with exposure to mercurials) available in the literature, and consequently the best estimates of the characteristics of this transport process. The values of P can be taken as references for the studies of water permeability in various cells or in pathological conditions.     

Fura-2 handling in a polarized epithelial barrier: the toad urinary bladder.

Toad bladders sacs were placed inside quartz cuvettes. When fura-2 AM was added to the mucosal compartment, low temperature (4 degrees C) almost completely blocked the transepithelial transfer of fluorescence observed at 20 degrees C (20 degrees C = 371 +/- 56, 4 degrees C = 29 +/- 29 fluorescence intensity in arbitrary units (FIAU), excitation at 340 nm, emission at 510 nm). Simultaneously, fluorescence accumulation inside the tissue was significantly higher (20 degrees C = 25 +/- 5, 4 degrees C = 91 +/- 24% increase on basal levels (%IBL)). When fura-2 AM was added to the serosal side, low temperature also reduced the serosal to mucosal transfer (20 degrees C = 149 +/- 36, 4 degrees C = 61 +/- 35 FIAU). Nevertheless, in this situation tissue accumulation, that was significantly higher that the one observed when fura-2 AM was added to the mucosal side, was reduced at low temperature (20 degrees C = 300 +/- 30, 4 degrees C = 48 +/- 7 %IBL). Spectral analysis of the mucosal and serosal compartments indicated that free fura-2 was transferred from the intracellular to the serosal compartment, but not to the mucosal one. These results indicate that fura-2 appears as a useful tool to evaluate the cellular distribution and traffic of polycyclic charged and non-charged molecules.     

Measuring the translational diffusion coefficients of small DNA molecules by capillary electrophoresis

The apparent translational diffusion coefficients of four 20 base pair (bp) DNA oligonucleotides with different sequences have been measured by capillary electrophoresis, using the stopped migration method. The diffusion coefficients of the four oligomers were equal within experimental error, and averaged (120 +/- 10) x 10(-8) cm(2) s(-1) in 40 mM Tris-acetate-EDTA buffer at 25 degrees C. Since this value is nearly identical to the translational diffusion coefficient determined for a different 20-bp oligomer using other methods, the stopped migration method can accurately measure the diffusion coefficients of small DNA oligomers. The apparent diffusion coefficient of a 118-bp DNA restriction fragment was also measured by the stopped migration method. However, the observed value was approximately 25% larger than expected from other measurements, possibly because the diffusion coefficients of larger DNA molecules are somewhat dependent on the ionic strength of the solution.     

Effects of incubation temperature on growth and production of exopolysaccharides by an antarctic sea ice bacterium grown in batch culture

The sea ice microbial community plays a key role in the productivity of the Southern Ocean. Exopolysaccharide (EPS) is a major component of the exopolymer secreted by many marine bacteria to enhance survival and is abundant in sea ice brine channels, but little is known about its function there. This study investigated the effects of temperature on EPS production in batch culture by CAM025, a marine bacterium isolated from sea ice sampled from the Southern Ocean. Previous studies have shown that CAM025 is a member of the genus Pseudoalteromonas and therefore belongs to a group found to be abundant in sea ice by culture-dependent and -independent techniques. Batch cultures were grown at -2 degrees C, 10 degrees C, and 20 degrees C, and cell number, optical density, pH, glucose concentration, and viscosity were monitored. The yield of EPS at -2 degrees C and 10 degrees C was 30 times higher than at 20 degrees C, which is the optimum growth temperature for many psychrotolerant strains. EPS may have a cryoprotective role in brine channels of sea ice, where extremes of high salinity and low temperature impose pressures on microbial growth and survival. The EPS produced at -2 degrees C and 10 degrees C had a higher uronic acid content than that produced at 20 degrees C. The availability of iron as a trace metal is of critical importance in the Southern Ocean, where it is known to limit primary production. EPS from strain CAM025 is polyanionic and may bind dissolved cations such at trace metals, and therefore the presence of bacterial EPS in the Antarctic marine environment may have important ecological implications.     

NMR imaging of the diffusion of water at 37 degrees C into Poly(2-hydroxyethyl methacrylate) containing aspirin or vitamin B(12)

The ingress of water into poly(2-hydroxyethyl methacrylate), PHEMA, loaded with either one of two model drugs, vitamin B(12) or aspirin, was studied at 37 degrees C using three-dimensional NMR imaging. PHEMA was loaded with 5 and 10 wt % of the drugs. From the imaging profiles, it was observed that incorporation of vitamin B(12) into PHEMA resulted in enhanced crack formation on sorption of water and the crack healing behind the diffusion front was slower than for PHEMA without added drug. This was accounted for by the anti-plasticization of PHEMA by vitamin B(12). Crack formation was inhibited in the PHEMA-aspirin systems because of the plasticizing effect of the aspirin on the PHEMA matrix. All of the polymers were found to absorb water according to an underlying Fickian diffusion mechanism. For PHEMA loaded with 5 wt % of aspirin or vitamin B(12), the best values of the water diffusion coefficients were both found to be 1.3 +/- 0.1 x 10(-11) m(2) s(-1) at 37 degrees C, while the values for the polymer loaded with 10 wt % of the drugs were slightly higher, 1.5 +/- 0.1 x 10(-11) m(2) s(-1).     

An NMR study of the temperature dependence of the coefficient of water self-diffusion through lipid bilayer membranes

The temperature dependence of the coefficient of water self-diffusion through plane-parallel lipid multilayers of the phospholipid dioleoylphosphatidylcholine oriented on a glass support has been studied in the temperature range of 20-60 degrees C by the method of NMR with magnetic field pulse gradient. The values of the coefficients of transbilayer water diffusion are by four orders of magnitude less than for bulky water and ten times less than the coefficients of lateral diffusion of the lipid under the same conditions. The temperature dependence of the coefficient of water diffusion is described by the Arrhenius law with an apparent activation energy of about 41 kJ/mol, which far exceeds the activation energy for the diffusion of bulky water (18 kJ/mol). The experimental data were analyzed using a "dissolving-diffusion" model, by simulating the passage of water through membrane channels, and by analyzing the exchange of water molecules in states with different modes of translation mobility, including pore channels and bilayer "defects". Each of the approaches used made it possible to take the significance of bilayer permeability for the apparent energy of activation of water diffusion into account and estimate the energies of activation of water diffusion in the hydrophobic moiety of the bilayer, which were found to be close to the values for bulky water. The coefficients of water diffusion in the system under examination and the coefficients of permeation of water through the bilayer were estimated, and the effect of bilayer "defects" on the coefficients of water diffusion along and across bilayers was studied.     

Concentration-dependent, temperature-dependent non-Newtonian viscosity of lung surfactant dispersions

The bulk shear viscosities of aqueous dispersions of lavaged calf lung surfactant (LS) and its chloroform:methanol extract (CLSE) were measured as a function of concentration, shear rate and temperature. At 10-mg phospholipid per milliliter, dispersions of LS and vortexed CLSE in 0.15 M NaCl (saline) had low viscosities near 1 cp over a range of shear rates from 225 to 1125 s(-1). Lung surfactant viscosity increased with phospholipid concentration and became strongly non-Newtonian with higher values at low shear rates. At 37 degrees C and 40 mg/ml, LS and vortexed CLSE in saline had viscosities of 38 and 34 cp (77 s(-1)) and 12 and 7 cp (770 s(-1)), respectively. Viscosity values for LS and CLSE were dependent on temperature and, at fixed shear, were lower at 23 degrees C than at 37 or 10 degrees C. Hysteresis was also present in viscosity measurements depending on whether shear rate was successively increased or decreased during study. Addition of 5 mM Ca(2+) at 37 degrees C markedly reduced CLSE viscosity at all shear rates and decreased LS viscosity at low shear rates. Dispersion by sonication rather than vortexing increased the viscosity of CLSE at fixed shear, while synthetic phospholipids dispersed by either method had low, relatively Newtonian viscosities. The complex viscous behavior of dispersions of LS and CLSE in saline results from their heterogeneous aggregated microstructure of phospholipids and apoproteins. Viscosity is influenced not only by the aggregate surface area under shear, but also by phospholipid-apoprotein interactions and aggregate structure/deformability. Similar complexities likely affect the viscosities of biologically-derived exogenous surfactant preparations administered to patients in clinical surfactant therapy.     

Diffusional properties of methanogenic granular sludge: 1H NMR characterization

The diffusive properties of anaerobic methanogenic and sulfidogenic aggregates present in wastewater treatment bioreactors were studied using diffusion analysis by relaxation time-separated pulsed-field gradient nuclear magnetic resonance (NMR) spectroscopy and NMR imaging. NMR spectroscopy measurements were performed at 22 degrees C with 10 ml of granular sludge at a magnetic field strength of 0.5 T (20 MHz resonance frequency for protons). Self-diffusion coefficients of H(2)O in the investigated series of mesophilic aggregates were found to be 51 to 78% lower than the self-diffusion coefficient of free water. Interestingly, self-diffusion coefficients of H(2)O were independent of the aggregate size for the size fractions investigated. Diffusional transport occurred faster in aggregates growing under nutrient-rich conditions (e.g., the bottom of a reactor) or at high (55 degrees C) temperatures than in aggregates cultivated in nutrient-poor conditions or at low (10 degrees C) temperatures. Exposure of aggregates to 2.5% glutaraldehyde or heat (70 or 90 degrees C for 30 min) modified the diffusional transport up to 20%. In contrast, deactivation of aggregates by HgCl(2) did not affect the H(2)O self-diffusion coefficient in aggregates. Analysis of NMR images of a single aggregate shows that methanogenic aggregates possess a spin-spin relaxation time and self-diffusion coefficient distribution, which are due to both physical (porosity) and chemical (metal sulfide precipitates) factors.     

Biogeochemical processes in the algal-bacterial mats of the Urinskii alkaline hot spring

The structure and production characteristics of microbial communities from the Urinskii alkaline hot spring (Buryat Republic, Russia) have been investigated. A distinctive characteristic of this hot spring is the lack of sulfide in the issuing water. The water temperature near the spring vents ranged from 69 to 38.5 degrees C and pH values ranged from 8.8 to 9.2. The total mineralization of water was less than 0.1 g/liter. Temperature has a profound effect on the species composition and biogeochemical processes occurring in the algal-bacterial mats of the Urinskii hot spring. The maximum diversity of the phototrophic community was observed at the temperatures 40 and 46 degrees C. A total of 12 species of cyanobacteria, 4 species of diatoms, and one species of thermophilic anoxygenic phototrophic bacteria, Chloroflexus aurantiacus, have been isolated from mat samples. At temperatures above 40 degrees C, the filamentous cyanobacterium Phormidium laminosum was predominant; its cell number and biomass concentration were 95.1 and 63.9%, respectively. At lower temperatures, the biomass concentrations of the cyanobacterium Oscillatoria limosa and diatoms increased (50.2 and 36.4%, respectively). The cyanobacterium Mastigocladus laminosus, which is normally found in neutral or slightly acidic hydrothermal systems, was detected in microbial communities. As the diatom concentration increases, so does the dry matter concentration in mats, while the content of organic matter decreases. The concentrations of proteins and carbohydrates reached their maximum levels at 45-50 degrees C. The maximum average rate of oxygenic photosynthesis (2.1 g C/m2 day), chlorophyll a content (343.4 mg/m2), and cell number of phototrophic microorganisms were observed at temperatures from 45 to 50 degrees C. The peak mass of bacterial mats (56.75 g/m2) occurred at a temperature of 65-60 degrees C. The maximum biomass concentration of phototrophs (414.63 x 10(-6) g/ml) and the peak rate of anoxygenic photosynthesis [0.42 g C/(m2 day)] were observed at a temperature of 35-40 degrees C.     

Effect of high temperature and water stress on in vitro germination and growth in isolates of the entomopathogenic fungus Beauveria bassiana (Bals.) Vuillemin

In non-irrigated agricultural fields in tropical zones, high temperature and water stress prevail during the main cropping season. Natural epizootics of Beauveria bassiana on lepidopteran pests occur during winter. Application of B. bassiana during hot months when pest populations are at their climax may prove an effective management strategy. Therefore, 29 isolates of B. bassiana were tested for their ability to germinate and grow in temperature and water availability conditions prevailing during the pest season in these fields. The effect of temperature cycles with 8 h duration of high temperature fluctuating with 16 h duration of lower temperature (similar to field conditions); low water availability; and a combination of these two stress conditions was studied. Germination and growth assays were done at fluctuating temperature cycles of 32, 35, 38, and 42+/-1 degrees C (8 h)/25+/-1 degrees C (16 h) and in media with water stress created by 10, 20, 30, and 40% polyethylene glycol (PEG 6000). Assays set at a continuous temperature of 25+/-1 degrees C with no PEG in the medium served as controls. Stress was assessed as percentage germination or as growth relative to control. Isolates showing 90% growth relative to the control at temperature cycles including high temperatures of 35 and 38+/-1 degrees C were identified. One isolate (ARSEF 2860) had a thermal threshold above 43 degrees C. At 25 degrees C, all but one isolate of B. bassiana showed >90% growth relative to the control in 10% PEG (-0.45 MPa). Some isolates were found with >90% growth relative to control in medium having 30% PEG with water availability (1.33 MPa), nearly equivalent to that in soils which induce permanent wilting point of plants. When isolates that showed >90% growth relative to the control at both stress conditions, were stressed simultaneously, a decrease in growth was observed. Growth was reduced by approximately 20% at 35+/-1 degrees C (8 h)/25+/-1 degrees C (16 h) and 10% PEG and was affected to a greater degree in combinations of harsher stress conditions. The isolate ARSEF 2860 with a thermal threshold of >43 degrees C showed approximately 80% relative growth at a combined stress of 38+/-1 degrees C (8 h)/25+/-1 degrees C (16 h) and 10% PEG. These findings will aid the selection of isolates for use in field trials in hot or dry agricultural climates.     

Effect of sperm diluents on the acrosome reaction in canine sperm

In this study we investigated the influence of sperm diluting media and temperature on the incidence of the acrosome reaction in dog sperm. Ejaculates were collected from 5 dogs, diluted with six different media and then incubated at 37 degrees C and 20 degrees C. Fluorescein isothiocynate conjugated peanut agglutinin (FITC-PNA) and ethidium homodimer as a vital stain were used in combination to determine the acrosomal status of viable spermatozoa, the technique was validated using electron microscopy. The outer acrosomal membrane of dog spermatozoa was shown to be the specific binding site for FITC-PNA. After 6 h of incubation, ejaculates diluted in media with a high Ca2+ concentration showed a significantly higher percentage (means +/- SD) of acrosome reacted spermatozoa [64 +/- 7 and 58 +/- 9 in sperm capacitation medium with (SP-TALP-1) and without BSA (SP-TALP-2), respectively] than those diluted in media with a low Ca2+ concentration [36 +/- 5, 39 +/- 4, 18 +/- 2 and 20 +/- 4 in Canine Capacitation Medium (CCM), Egg Yolk Tris dog semen extender (EXT-1), Modified Egg Yolk Tris extender (EXT-2) and Modified CCM (MCCM), respectively]. The increase in the percentage of acrosome reaction (AR) was slower at 20 degrees C than at 37 degrees C. In addition, the percentage of viable acrosome reacted spermatozoa increased significantly from 19 +/- 5 and 22 +/- 3 in non-bound sperm to 27 +/- 4 and 30 +/- 6 in zona pellucida bound sperm (diluted in EXT-2 and MCCM, respectively). We conclude that the composition of the spermatozoa diluent has a marked effect on the incidence of the acrosome reaction. Therefore, both the media used to dilute dog sperm and the temperature at which the spermatozoa are handled are important factors to consider when processing spermatozoa for artificial insemination, IVF procedures or preservation.     

Comparison of temperature effects on soil respiration and bacterial and fungal growth rates

Temperature is an important factor regulating microbial activity and shaping the soil microbial community. Little is known, however, on how temperature affects the most important groups of the soil microorganisms, the bacteria and the fungi, in situ. We have therefore measured the instantaneous total activity (respiration rate), bacterial activity (growth rate as thymidine incorporation rate) and fungal activity (growth rate as acetate-in-ergosterol incorporation rate) in soil at different temperatures (0-45 degrees C). Two soils were compared: one was an agricultural soil low in organic matter and with high pH, and the other was a forest humus soil with high organic matter content and low pH. Fungal and bacterial growth rates had optimum temperatures around 25-30 degrees C, while at higher temperatures lower values were found. This decrease was more drastic for fungi than for bacteria, resulting in an increase in the ratio of bacterial to fungal growth rate at higher temperatures. A tendency towards the opposite effect was observed at low temperatures, indicating that fungi were more adapted to low-temperature conditions than bacteria. The temperature dependence of all three activities was well modelled by the square root (Ratkowsky) model below the optimum temperature for fungal and bacterial growth. The respiration rate increased over almost the whole temperature range, showing the highest value at around 45 degrees C. Thus, at temperatures above 30 degrees C there was an uncoupling between the instantaneous respiration rate and bacterial and fungal activity. At these high temperatures, the respiration rate closely followed the Arrhenius temperature relationship.     

Macromolecular diffusion of biological polymers measured by confocal fluorescence recovery after photobleaching.

Fluorescence recovery after photobleaching with an unmodified confocal laser scanning microscope (confocal FRAP) was used to determine the diffusion properties of network forming biological macromolecules such as aggrecan. The technique was validated using fluorescein isothiocyanate (FITC)-labeled dextrans and proteins (molecular mass 4-2000 kDa) at 25 degrees C and with fluorescent microspheres (207 nm diameter) over a temperature range of 5-50 degrees C. Lateral diffusion coefficients (D) were independent of the focus position, and the degree and extent of bleach. The free diffusion coefficient (Do) of FITC-aggrecan determined by confocal FRAP was 4.25 +/- 0.6 x 10(-8) cm2 s-1, which is compatible with dynamic laser light scattering measurements. It appeared to be independent of concentration below 2.0 mg/ml, but at higher concentrations (2-20 mg/ml) the self-diffusion coefficient followed the function D = Do(e)(-Bc). The concentration at which the self-diffusion coefficient began to fall corresponded to the concentration predicted for domain overlap. Multimolecular aggregates of aggrecan ( approximately 30 monomers) had a much lower free diffusion coefficient (Do = 6.6 +/- 1.0 x 10(-9) cm2 s-1) but showed a decrease in mobility with concentration of a form similar to that of the monomer. The method provides a technique for investigating the macromolecular organization in glycan-rich networks at concentrations close to those found physiologically.     

不同含水量和温度下贮存中球孢白僵菌分生孢子活力与内贮营养的衰变

将球孢白僵菌(Beauveriabassiana)BBSG8702的未干燥孢子粉(含水量58.9±1.6%)和真空冷冻干燥孢子粉(含水量7.4±0.9%)置于4℃和20℃下贮存1个月,每隔5d取样测定活孢率和孢子内贮总糖和蛋白含量,发现含水量和贮存温度交互影响孢子的活力以及内贮总糖和蛋白质的代谢水平,各组合中的活孢率一般与内贮总糖和蛋白质代谢水平均存在显著或极显著相关性.在1个月的贮存期间,4℃下冻干粉总糖含量下降13.4%,蛋白质含量下降39.2%,清水中的萌发率下降32.0%,营养液中的萌发率仅下降6.7%,而未干燥孢子粉的相同指标分别下降42.4%、66.3%、96.4%和99%;在20℃下,冻干粉的上述指标分别下降了14.1%、38.2%、55.8%和 10.4%,而未干燥孢子粉则分别下降了 43.2%、65.4%、99.4%和98.4%. 显然,含水量影响活孢率和内贮营养衰变的幅度,而温度影响衰变的速度,但内贮营养的耗尽并不立即引起孢子失活,在供给外源营养之后孢子仍能萌发.将含水量降至4.0±0.9%的冻干粉贮存1年,4℃下活孢率由初始的99.0%下降至90.2%,而20℃下贮存的前165d活孢率下降较为缓慢,但此后急剧下降,至第240d时几乎全部失活.模拟分析表明,低含水量冻干粉在4℃和20℃下贮存的半衰期(即活孢率减少一半所需的时间)分别为1006d和197d.这些结果说明,白僵菌纯孢粉的含水量     

Control of local heat gain by vasomotor response of the hand

Finger blood flow (BF) was measured by venous occlusion plethysmography using mercury-in-Silastic strain gauges during immersion of one hand in hot water (raised by steps of 2 degrees C every 10 min from 35 to 43 degrees C), the other being a control (kept immersed in water at 35 degrees C). The measurements were made in three different thermal states on separate days: 1) cool-25 degrees C, 40% rh, esophageal temperature (Tes) = 36.64 +/- 0.10 degrees C; 2) warm-35 degrees C, 40% rh, Tes = 36.71 +/- 0.11 degrees C; and 3) hot-35 degrees C, 80% rh with the legs immersed in water at 42 degrees C, Tes = 37.26 +/- 0.11 degrees C. When water temperature was raised at 42 degrees C, Tes = 37.26 +/- 0.11 When water temperature was raised to 39-41 degrees C in the warm state, finger BF in the hand heated locally (BFw) decreased. When water temperature was raised to 43 degrees C, however, BFw returned to the control value. In the hot state, Tes rose steadily, reaching 37.90 +/- 0.12 degrees C at the end of the 50-min sessions. BF in the control finger also increased gradually during the session. BFw showed a tendency to decrease when water temperature was raised to 39 degrees C, but the change was not greater than that observed in the warm state. In the cool state, no such reduction in BFw was observed when water temperature was raised to 39-41 degrees C. On the contrary, BFw increased at water temperatures of 41-43 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS)