Molecular Characterization of Plasmid pBM300 from Bacillus megaterium QM B1551

Strain QM B1551 of Bacillus megaterium contains seven compatible plasmids: two small rolling circle plasmids and five theta-replicating plasmids with cross-hybridizing replicons. To expand our understanding of these plasmids, the replicon region (6.7 kb) from pBM300 was cloned, sequenced, and functionally characterized. Sequence analysis showed that the replication protein (RepM300) was highly homologous to two other plasmid Rep proteins of the same strain but to no other known proteins. Furthermore, the location of the replication origin was within the RepM300 coding region, and the origin contained three 12-base direct repeats. Deletion analysis of the replicon confirmed the role of the Rep protein and showed that open reading frame 2 (ORF2) was required for stability. However, the protein encoded by ORF2 is entirely different from the replicon stability proteins encoded by the other two replicons. The entire plasmid was isolated from the plasmid array by integrating a spectinomycin resistance gene and transforming a plasmidless strain, PV361. Complete sequencing showed that pBM300 was 26,300 bp long, had a G+C content of 35.2%, and contained 20 ORFs, two of which encoded proteins that had no similarity to other proteins in the database. The proteins encoded by the plasmid ORFs had similarity to proteins for mobilization and transfer, an integrase, a rifampin resistance protein, a cell wall hydrolase, glutathione synthase, and a biotin carboxylase. The similarities were to several gram-positive genera and a few gram-negative genera and archaea. oriT and ssoT-like regions were detected near two mob genes. These results suggest that pBM300 is a mobilizable hybrid plasmid that confers increased metabolic and germination ability on its host. Its replicon also helps define a new plasmid family.     

Analysis of the replicon region and identification of an rRNA operon on pBM400 of Bacillus megaterium QM B1551

An 18 633 bp region containing the replicon from the approximately 53 kb pBM400 plasmid of Bacillus megaterium QM B1551 has been sequenced and characterized. This region contained a complete rRNA operon plus 10 other potential open reading frames (ORFs). The replicon consisted of an upstream promoter and three contiguous genes (repM400, orfB and orfC) that could encode putative proteins of 428, 251 and 289 amino acids respectively. A 1.6 kb minimal replicon was defined and contained most of repM400. OrfB was shown to be required for stability. Three 12 bp identical tandem repeats were located within the coding region of repM400, and their presence on another plasmid caused incompatibility with their own cognate replicon. Nonsense, frameshift and deletion mutations in repM400 prevented replication, but each mutation could be complemented in trans. RepM400 had no significant similarity to sequences in the GenBank database, whereas five other ORFs had some similarity to gene products from other plasmids and the Bacillus genome. An rRNA operon was located upstream of the replication region and is the first rRNA operon to be sequenced from B. megaterium. Its unusual location on non-essential plasmid DNA has implications for systematics and evolutionary biology.     

<Emphasis Type="Italic">Bacillus megaterium</Emphasis>—from simple soil bacterium to industrial protein production host

Bacillus megaterium has been industrially employed for more than 50 years, as it possesses some very useful and unusual enzymes and a high capacity for the production of exoenzymes. It is also a desirable cloning host for the production of intact proteins, as it does not possess external alkaline proteases and can stably maintain a variety of plasmid vectors. Genetic tools for this species include transducing phages and several hundred mutants covering the processes of biosynthesis, catabolism, division, sporulation, germination, antibiotic resistance, and recombination. The seven plasmids of B. megaterium strain QM B1551 contain several unusual metabolic genes that may be useful in bioremediation. Recently, several recombinant shuttle vectors carrying different strong inducible promoters and various combinations of affinity tags for simple protein purification have been constructed. Leader sequences-mediated export of affinity-tagged proteins into the growth medium was made possible. These plasmids are commercially available. For a broader application of B. megaterium in industry, sporulation and protease-deficient as well as UV-sensitive mutants were constructed. The genome sequence of two different strains, plasmidless DSM319 and QM B1551 carrying seven natural plasmids, is now available. These sequences allow for a systems biotechnology optimization of the production host B. megaterium. Altogether, a “toolbox” of hundreds of genetically characterized strains, genetic methods, vectors, hosts, and genomic sequences make B. megaterium an ideal organism for industrial, environmental, and experimental applications.     

Genetic analysis of the minimal replicon of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid

Using a combination of mutagenesis with the transposon and polymerase chain reaction subcloning, the essential elements of the replication region of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid have been identified. An open reading frame, coding for a protein with homology to Rep proteins from other Lactococcus plasmids, is essential. This protein is trans-acting and could not be replaced by the Rep protein from another Lactococcus plasmid. A second open reading frame immediately downstream from the first could be removed or inactivated with no apparent effect on plasmid replication. A region containing two 10 by direct repeats and three tandem repeats of a 22 by sequence, immediately upstream of the essential open reading frame, is also essential and probably includes the origin of replication. A 181-bp DNA fragment containing this region was sufficient to allow replication in Lactococcus if the trans-acting protein was provided on another replicon. Single-stranded replication intermediates could not be detected, suggesting that the citrate plasmid uses theta replication rather than rolling-circle replication.     

Distribution of Bacillus megaterium QM B1551 plasmids among other B. megaterium strains and Bacillus species

Bacillus megaterium QM B1551 contains seven plasmids. Two are small rolling circle plasmids and five are theta-replicating plasmids with cross-hybridizing replicons that define a new family of very homologous yet compatible theta replicons. Previous sequencing of several of the plasmids has shown genes with high similarity to those on the genomes and plasmids of other Gram-positive bacteria. To test the possible distribution of these plasmids, nine other B. megaterium strains and 20 other Bacillus or related species were tested for the presence of similar replicons, and specific flanking DNA by both hybridization and PCR. The theta replicons were widespread among the B. megaterium strains, and two had one or more of the rolling circle plasmids, but none of the plasmid replicon regions were observed in the other Bacillus or related species. It appears from the data that even though some plasmids carry genes suggesting horizontal transfer, their replicons seem to be unique to B. megaterium, or rarely present in related species.     

Complete Sequence of Plasmid pMP1 from the Marine Environmental Vibrio vulnificus and Location of Its Replication Origin

A novel cryptic plasmid, pMP1, from an environmental Vibrio vulnificus MP-4 isolated from Mai Po Nature Reserve in Hong Kong, has been characterized. The 7.6-kb plasmid had guanine–cytosine content of 40.03% and encoded four open reading frames (ORFs) with >100 amino acids. The predicted protein of ORF1 contained 478 amino acids showing 29% identity and 50% similarity over 309 amino acids to the integrase of Vibrio cholerae phage VP2. ORF2 encoded a putative protein of 596 amino acids, which were 23% identity and 42% similarity over 455 amino acids to the tail tape measure protein TP901 of Chromohalobacter salexigens phage. ORF3 and ORF4 encoded putative proteins of 103 and 287 amino acids, respectively, but showed no homologies to any known proteins. Further experiments indicated that a 3.2-kb fragment from EcoRI digestion could self-replicate. Analysis indicated that a sequence upstream of ORF4 had the features characteristic of theta-type replicons: AT-rich region, six potential direct repeats (iterons) spaced approximately two DNA helical turn apart (about 23 bp), two copies of 9 bp dnaA boxes, three Dam methylation sites, and five inverted repeats. Complementation experiments confirmed that the protein encoded by ORF4 was required for plasmid replication. We propose that ORF4 encode a new type of Rep protein and pMP1 is a new type of theta plasmid.     

DNA sequence analysis of a putative primary replicon from a cryptic plasmid pNM214 of a hydrocarbon utilizing marine <Emphasis Type="Italic">Bacillus</Emphasis> strain NM21

Marine Bacillus strain NM21 isolated from hydrocarbon-contaminated site at Naval Harbour, Mumbai grows on high-speed diesel as a source of carbon and energy. This bacterium harbours four plasmids in it. The smallest plasmid, pNM214 was digested with EcoRI enzyme and cloned in pUC19 vector. The clone Om4 containing largest insert of >3.5 kb was sequenced by primer walking. DNA sequence analysis showed this fragment to be homologous to replication initiation protein (rep) gene and dso (double strand origin) of different plasmids from Bacillus subtilis and Bacillus pumilus species. The putative rep gene sequence of pNM214 showed 74.3–91.6% DNA identity to B. subtilis plasmids (pTA1015, pTA1060 and pTA1040) and 86.3% to 88.9% DNA identity to B. pumilus plasmids (pPL7065, pPL10 and pSH1452). The translated amino acid sequence of rep shows that it contains all the three conserved motifs present in the Rep protein of pC194 family of plasmids. DNA sequence comparison of putative dso of pNM214 with other bacillus plasmids belonging to pC194 group shows that it contains highly conserved nick site sequence 5′-TCTTTTCTTATCTTGATA-3′ and surrounding inverted repeats. Thus, it indicates that pNM214 to be a rolling circle replicating plasmid belonging to the pC194 group. The presence of rep and dso like sequences in the sequenced EcoRI fragment indicate that the cloned fragment contain putative primary replicon of pNM214.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Molecular characterization of the replicon of the Pediococcus pentosaceus 43200 pediocin A plasmid pMD136

The pediocin A-encoding plasmid of Pediococcus pentosaceus 43200, pMD136, was characterized by restriction enzyme analysis. Analysis of its replicon was facilitated by the construction of a probe vector consisting of the Escherichia coli plasmid pSP72 and the cat gene from Staphylococcus aureus plasmid pC194. The replication region of pMD136 was localized on a 1.6-kb EcoRI/BglII fragment. Sequencing analysis revealed a non-coding region, repA, spanning the first 440 bp, followed by an open reading frame, repB, encoding a putative protein of 390 amino acids. The non-coding region contained two sets of 6-bp and two sets of 22-bp direct repeats and two sets of inverted repeats upstream of the open reading frame. Strong homology of the isolated replicon was found to theta-type replicons of Lactococcus lactis plasmids. Segregational stability assay suggested at least two regions as potentially involved in the stabilization of pMD136. The plasmid's strong homology to other theta-type replicons and its relatively high stability suggest that pMD136 belongs to the widespread family of theta-replication plasmids.     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

Cloning and Characterization of theoriRegion of pSW1200 ofErwinia stewartii:Similarity with Plasmid P1

Theoriregion of anErwinia stewartiiplasmid, pSW1200 (106 kb), has been cloned and sequenced. This region consists of a gene encoding a protein which has 91% similarity and 73% identity with the RepA protein of bacteriophage P1. Theoriregion also consists of eight copies of 19-bp iterons which are highly homologous to the iterons of P1. Similar to plasmid P1, pSW1200 replicon has a copy number of approximately 1. On the other hand, the copy number increases about ninefold if three of the iterons located downstream fromrepAgene are deleted. We also demonstrate that pGEM-5Z consisting of a copy of P1 iteron is incompatible with a pSW1200 derivative, pSW1201, suggesting that pSW1200 and P1 DNA are incompatible and both belong to the IncY group.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

The Replicon of the Cryptic Plasmid pSBO1 Isolated from Streptococcus bovis JB1

The cryptic plasmid pSBO1 (3904 bp) was isolated from Streptococcus bovis JB1. pSBO1 contained an open reading frame (ORF) that is homologous to sequences encoding the replication protein (Rep) in pEFC1 (isolated from Enterococcus faecalis), pSK639 (Staphylococcus epidermidis), pLA103 (Lactobacillus acidophilus), and pUCL287 (Tetragenococcus halophila). In addition, four 22-bp direct repeats (DRs) were located upstream of the putative replication gene (rep) of pSBO1. Recombinant plasmids (pSBE10 and pSBE11) containing the DRs and putative rep of pSBO1 replicated in S. bovis 12-U-1 and no8 strains. This result indicates that the putative rep encoded Rep and that the replicon of pSBO1 contained the DRs and the rep. Gel shift assays showed that the Rep of pSBO1 bound the 22-bp DRs. Received: 14 September 2000 / Accepted: 28 November 2000     

Plasmids for efficient single-copy gene cloning into gdh2 and trpC of Bacillus megaterium DSM319 and QM B1551

We constructed integrative plasmids to place xylA-lacZ indicator gene fusions into two different loci of the Bacillus megaterium chromosome, gdh2 and trpC, in lac mutants of strains DSM 319 and QM B1551, which differ markedly. Single-crossover integration was achieved in all cases while double crossovers occurred only in gdh2 of DSM 319 and QM B1551 and in trpC of QM B1551. Neither of the loci affected regulation of the xylA-lacZ fusions. These results confirm the suitability of the two gene loci for single-copy cloning. Received: 28 October 1996 / Received revision: 29 December 1996 / Accepted: 4 January 1997     

Construction of a new food-grade expression system for <Emphasis Type="Italic">Bacillus subtilis</Emphasis> based on theta replication plasmids and auxotrophic complementation

A new food-grade expression system was constructed for Bacillus subtilis based on replicative food-grade expression plasmids and auxotrophic complementation. The food-grade B. subtilis host FG01 was created by knockout of the dal locus from the chromosome of B. subtilis 168. Two food-grade expression plasmids pXFGT03 and pXFGT05 were constructed by combining a novel theta-type Bacillus replicon with the B. subtilis endogenous gene dal and P43 promoter; while pXFGT05 was derived from pXFGT03 by deletion of two open reading frames (ORFs) from the original replicon. Upon transformation of FG01 with pXFGT03 or pXFGT05, the host phenotype was complemented on Luria–Bertani agar plates by the plasmid-coded dal gene, which served as a food-grade selection marker for recombinants. Results showed that deletion of the two ORFs had no impact on plasmid replication. A reporter gene bgaB was cloned into pXFGT03 and pXFGT05, respectively, under control of the P43 promoter, and it was successfully expressed in this food-grade expression system. Segregational stabilities of two recombinant plasmids were investigated, and they were fully stable.