Effect of thermal acclimation on thermal preference,resistance and locomotor performance of hatchling soft-shelled turtle

The significant influence of thermal acclimation on physiological and behavioral performance has been documented in many ectothermic animals, but such studies are still limited in turtle species. We acclimated hatchling soft-shelled turtles Pelodiscus sinensis under three thermal conditions （10, 20 and 30~C） for 4 weeks, and then measured selected body temperature （Tsel）, critical thermal minimum （CTMin） and maximum （CTM~x）, and locomotor performance at different body temperatures. Thermal acclimation significantly affected thermal preference and resistance of P sinensis hatchlings. Hatchling turtles accli- mated to 10~C selected relatively lower body temperatures and were less resistant to high temperatures than those acclimated to 20~C and 30~C. The turtles＇ resistance to low temperatures increased with a decreasing acclimation temperature. The thermal re- sistance range （i.e. the difference between CTM~x and CTMin, TRR） was widest in turtles acclimated to 20~C, and narrowest in those acclimated to 10~C. The locomotor performance of turtles was affected by both body temperature and acclimation tem- perature. Hatchling turtles acclimated to relatively higher temperatures swam faster than did those acclimated to lower temperatures. Accordingly, hatchling turtles acclimated to a particular temperature may not enhance the performance at that temperature. Instead, hatchlings acclimated to relatively warm temperatures have a better performance, supporting the ＂hotter is better＂ hypothesis.     

Amino silicones finished fabrics for lipase immobilization: Fabrics finishing and catalytic performance of immobilized lipase

Finishing of silk fabric was achieved by using amino-functional polydimethylsiloxane (PDMS) and lipase from Candida sp. 99-125 was immobilized on the treated silk fabrics. Hydrophobic fabrics were obtained by dipping the native fabric in 0.125–0.25% (w/v) PDMS solution and dried at 70 °C. The direct adsorption on PDMS-treated fabric was verified to be a better strategy for lipase immobilization than that by covalent binding. Compared to unfinished fabrics, the hydrolytic activity of immobilized enzyme on the finished fabric was improved by 1.6 times. Moreover, the activity of immobilized enzymes on hydrophobic fabrics was significantly improved in different concentrations of strong polar solvents such as methanol and ethanol, and in common organic solvents with different octanol–water partition coefficients (Log P). Enzymatic activity and stability in 15% water content system (added water accounted for the total reaction mixtures, v/v) showed more than 30% improvement in each batch. The amino–silicone finished fabric surface was investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. The hydrophobic fabric immobilized enzyme could be recycled for more than 80 times with no significant decrease in esterification activity. PDMS-treated woven silk fabrics could be a potential support for lipase immobilization in catalytic esterification processes.     

Synthesis of functionalized polyethylenimine-grafted mesoporous silica spheres and the effect of side arms on lipase immobilization and application

In the present study, silicate mesoporous materials (MCM-41), MCM-41-grafted polyethylenimine (MCM-41@PEI), and succinated PEI containing amine, amide, and acid groups were successfully synthesized and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller analysis, and X-ray photoelectron spectroscopy. Thermomyces lanuginosa lipase (TLL) was then immobilized onto MCM-41 and polymer-grafted MCM-41 by physical adsorption. Besides, for enzyme immobilization via covalent bonding, glutaraldehyde (GLU), and hexamethylene diisocyanate (HMDI) were used as the bridges for binding the enzyme to supports. The best result was obtained with the immobilized lipase on MCM-41@PEI-GLU. In the study of the enzyme reusability, it was shown that about 83% of the initial activity could be retained after 12 cycles of uses. The immobilized lipase on the selected support was also applied for the synthesis of ethyl valerate. Following 24 h incubation in n-hexane and solvent free media, the esterification percentages were 79% and 67%, respectively.     

A comparative study of free and immobilized soybean and horseradish peroxidases for 4-chlorophenol removal: protective effects of immobilization

Horseradish peroxidase (HRP) and soybean peroxidase (SBP) were covalently immobilized onto aldehyde glass through their amine groups. The activity yield and the protein content for the immobilized SBP were higher than for the immobilized HRP. When free and immobilized peroxidases were tested for their ability to remove 4-chlorophenol from aqueous solutions, the removal percentages were higher with immobilized HRP than with free HRP, whereas immobilized SBP needs more enzyme to reach the same conversion than free enzyme. In the present paper the two immobilized derivatives are compared. It was found that at an immobilized enzyme concentration in the reactor of 15 mg l(-1), SBP removed 5% more of 4-chlorophenol than HRP, and that a shorter treatment was necessary. Since immobilized SBP was less susceptible to inactivation than HRP and provided higher 4-chlorophenol elimination, this derivative was chosen for further inactivation studies. The protective effect of the immobilization against the enzyme inactivation by hydrogen peroxide was demonstrated.     

Sequence- and structure-guided improvement of the catalytic performance of a GH11 family xylanase from Bacillus subtilis

Xylanases produce xylooligosaccharides from xylan and have thus attracted increasing attention for their usefulness in industrial applications. Previously, we demonstrated that the GH11 xylanase XynLC9 from Bacillus subtilis formed xylobiose and xylotriose as the major products with negligible production of xylose when digesting corncob-extracted xylan. Here, we aimed to improve the catalytic performance of XynLC9 via protein engineering. Based on the sequence and structural comparisons of XynLC9 with the xylanases Xyn2 from Trichoderma reesei and Xyn11A from Thermobifida fusca, we identified the N-terminal residues 5-YWQN-8 in XynLC9 as engineering hotspots and subjected this sequence to site saturation and iterative mutagenesis. The mutants W6F/Q7H and N8Y possessed a 2.6- and 1.8-fold higher catalytic activity than XynLC9, respectively, and both mutants were also more thermostable. Kinetic measurements suggested that W6F/Q7H and N8Y had lower substrate affinity, but a higher turnover rate (k_cat), which resulted in increased catalytic efficiency than WT XynLC9. Furthermore, the W6F/Q7H mutant displayed a 160% increase in the yield of xylooligosaccharides from corncob-extracted xylan. Molecular dynamics simulations revealed that the W6F/Q7H and N8Y mutations led to an enlarged volume and surface area of the active site cleft, which provided more space for substrate entry and product release and thus accelerated the catalytic activity of the enzyme. The molecular evolution approach adopted in this study provides the design of a library of sequences that captures functional diversity in a limited number of protein variants.     

枯草芽孢杆菌嘌呤核苷磷酸化酶酶学性质研究及在利巴韦林酶法合成中的应用

利用PCR技术从枯草芽孢杆菌基因组DNA中扩增出其编码嘌呤核苷磷酸化酶的两种基因deoD和punA,构建工程菌并采用金属螯合层析纯化PNP₇₀₂和PNP₈₁₆,酶学性质研究表明:二者具有一致的最适反应温度(60℃)和最适反应pH值(7~8),PNP₈₁₆磷酸解肌苷的催化效率(k_cat/K_m)比PNP₇₀₂高出11.12倍。底物特异性试验表明:PNP₇₀₂为高分子量的六聚体,而PNP₈₁₆为低分子量的三聚体。分别以纯化酶和工程菌菌体为酶源,以肌苷或鸟苷为核糖基供体,TCA(1,2,4-三氮唑-3-甲酰胺)为底物,酶法合成核苷类抗病毒药物利巴韦林,PNP₈₁₆和工程菌XL-Blue(pPNP₈₁₆)较PNP₇₀₂和工程菌XL-Blue(pPNP₇₀₂)具有更高的催化速度和底物转化率,表明来源于微生物的低分子量的三聚体PNP在核苷类药物和中间体微生物酶法合成中具有更高的应用价值。     

Molecular cloning of a thermo-alkaliphilic lipase from Bacillus subtilis DR8806: Expression and biochemical characterization

A thermo-alkaliphilic lipase from Bacillus subtilis DR8806 was functionally expressed as an N-terminal 6xHis-tagged recombinant enzyme in Escherichia coli BL21 using pET-28a(+) expression vector. Sequence analysis revealed an open reading frame of 639 bp encoding a 212-amino acid protein containing the well-conserved Ala-His-Ser-Met-Gly motif. One-step purification of the His-tagged recombinant lipase was achieved using Ni-NTA affinity chromatography with a specific activity of 1364 U/mg. The purified enzyme with an apparent molecular mass of 26.8 kDa demonstrated the maximum activity at 70 °C and pH 8.0 for hydrolysis of p-nitrophenylbutyrate as substrate. The enzyme activity was strongly inhibited by divalent ions of heavy metals such as Hg²⁺ and Cu²⁺, while retained over 90% of the original activity in the presence of several reagents including DTNB (5,5′-dithiobis-(2-nitrobenzoic acid)), SDS (sodium dodecyl sulfate), urea, DMF (dimethylformamide), DTT (dithiothreitol), glycerol and Triton X-100. While being considerably stable in organic solvents, imidazolium-based ionic liquids (ILs) had stimulatory effects on the activity of purified lipase. Remarkable stabilization of enzyme at alkaline pH and in ionic liquids as well as its thermostability/thermoactivity are among the most fundamental characteristics which offer great potential for various biotechnological applications including detergent formulation, bioremediation processes and biotransformation in non-aqueous media.     

Antimycoplasma properties and application in cell culture of surfactin, a lipopeptide antibiotic from Bacillus subtilis.

Surfactin, a cyclic lipopeptide antibiotic and biosurfactant produced by Bacillus subtilis, is well-known for its interactions with artificial and biomembrane systems (e.g., bacterial protoplasts or enveloped viruses). To assess the applicability of this antiviral and antibacterial drug, we determined the cytotoxicity of surfactin with a 50% cytotoxic concentration of 30 to 64 microM for a variety of human and animal cell lines in vitro. Concomitantly, we observed an improvement in proliferation rates and changes in the morphology of mycoplasma-contaminated mammalian cells after treatment with this drug. A single treatment over one passage led to complete removal of viable Mycoplasma hyorhinis cells from various adherent cell lines, and Mycoplasma orale was removed from nonadherent human T-lymphoid cell lines by double treatment. This effect was monitored by a DNA fluorescence test, an enzyme-linked immunosorbent assay, and two different PCR methods. Disintegration of the mycoplasma membranes as observed by electron microscopy indicated the mode of action of surfactin. Disintegration is obviously due to a physicochemical interaction of the membrane-active surfactant with the outer part of the lipid membrane bilayer, which causes permeability changes and at higher concentrations leads finally to disintegration of the mycoplasma membrane system by a detergent effect. The low cytotoxicity of surfactin for mammalian cells permits specific inactivation of mycoplasmas without significant deleterious effects on cell metabolism and the proliferation rate in cell culture. These results were used to develop a fast and simple method for complete and permanent inactivation of mycoplasmas in mammalian monolayer and suspension cell cultures.     

Isolation of a recombinant antibody from cell culture supernatant: continuous annular versus batch and expanded-bed chromatography

Annular chromatography represents a crossflow approach to chromatographic separations, that allows the continuous separation of multicomponent mixtures. The potential of the method for continuous bioseparation has been discussed for some time, however, we demonstrate for the first time the processing of a complex feed (cell culture supernatant) taken from an actual (bio)process. Moreover, while previously published applications of annular chromatography concentrated on noninteractive (gel filtration) or nonspecific (ion exchange) chromatography, we show the possibility of continuous annular affinity chromatography. In particular, a commercially available preparative continuous annular chromatography (P-CAC) system was used to purify a recombinant antibody (human IgG(1)-kappa) from CHO cell culture supernatants by (pseudo)affinity chromatography on hydroxyapatite (HA) and rProtein A. Methods developed using small (2 mL) batch columns could be directly transferred to the P-CAC, where they yielded similar results in terms of final product quality. Yields were between 87% and 92% in the case of HA and between 77% and 82% in the case of rProtein A chromatography. DNA removal was nearly quantitative in all cases. Concomitantly, the antibody fraction of the total protein content was raised by one order of magnitude in HA and by a factor of 50 by rProtein A chromatography. In addition, a novel HA material (particle diameter -120 microm) was investigated, which was compatible with expanded-bed applications. However, the final purity of the antibody thus obtained and also the yields (<70%) were less than satisfactory.     

Crystal structure of 5-methylthioribose 1-phosphate isomerase product complex from Bacillus subtilis: implications for catalytic mechanism

The methionine salvage pathway (MSP) plays a crucial role in recycling a sulphahydryl derivative of the nucleoside. Recently, the genes and reactions in MSP from Bacillus subtilis have been identified, where 5-methylthioribose 1-phosphate isomerase (M1Pi) catalyzes a conversion of 5-methylthioribose 1-phosphate (MTR-1-P) to 5-methylthioribulose 1-phosphate (MTRu-1-P). Herein, we report the crystal structures of B. subtilis M1Pi (Bs-M1Pi) in complex with its product MTRu-1-P, and a sulfate at 2.4 and 2.7 A resolution, respectively. The electron density clearly shows the presence of each compound in the active site. The structural comparison with other homologous proteins explains how the substrate uptake of Bs-M1Pi may be induced by an open/closed transition of the active site. The highly conserved residues at the active site, namely, Cys160 and Asp240 are most likely to be involved in catalysis. The structural analysis sheds light on its catalytic mechanism of M1Pi.     

Continuous purification of antibodies from cell culture supernatant with aqueous two-phase systems: From concept to process

An aqueous two-phase extraction (ATPE) process based on a PEG/phosphate system was developed for the capture of human immunoglobulin G and successfully applied to a Chinese hamster ovary and a PER.C6® cell supernatant. A continuous ATPE process incorporating three different steps (extraction, back-extraction, and washing) was set up and validated in a pump mixer-settler battery. Most of the higher molecular weight cell supernatant impurities were removed during the extraction step, while most of the lower molecular weight impurities were removed during the subsequent steps. A global recovery yield of 80% and a final protein purity of more than 99% were obtained for the IgG purification from a CHO cell supernatant, representing a 155-fold reduction in the protein/IgG ratio. For the purification of IgG from a PER.C6® cell supernatant, a global recovery yield of 100%, and a host cell protein purity were attained, representing a 22-fold reduction in the host cell protein/IgG ratio. These results, thus, open promising perspectives for the application of the developed ATPE process as a platform for the capture of antibodies. In fact, this new process has shown the ability to successfully recover and purify different antibodies from distinct cell culture supernatants. This technology can also overcome some of the limitations encountered using the typical chromatographic processes, besides inherent advantages of scalability, process integration, capability of continuous operation, and economic feasibility.     

Identification of the catalytic nucleophile in Family 42 beta-galactosidases by intermediate trapping and peptide mapping: YesZ from Bacillus subtilis

The mechanism-based inhibitor 2,4-dinitrophenyl 2-deoxy-2-fluoro-beta-d-galactopyranoside (DNP2FGal) was used to inactivate the Family 42 beta-galactosidase (YesZ) from Bacillus subtilis via the trapping of a glycosyl-enzyme intermediate, thereby tagging the catalytic nucleophile in the active site. Proteolytic digestion of the inactivated enzyme and of a control sample of unlabeled enzyme, followed by comparative high-performance liquid chromatography and mass spectrometric analysis identified a labelled peptide of the sequence ETSPSYAASL. These data, combined with sequence alignments of this region with representative members of Family 42, unequivocally identify the catalytic nucleophile in this enzyme as Glu-295, thereby providing the first direct experimental proof of the identity of this residue within Family 42.     

Design of β‐galactosidase/silica biocatalysts: Impact of the enzyme properties and immobilization pathways on their catalytic performance

The use of heterogeneous biocatalysis in industrial applications is advantageous and the enzyme stability improvement is a continuous challenge. Therefore, we designed β‐galactosidase heterogeneous biocatalysts by immobilization, involving the support synthesis and enzyme selection (from Bacillus circulans, Kluyveromyces lactis, and Aspergillus oryzae). The underivatized, tailored, macro‐mesoporous silica exhibited high surface area, offered high enzyme immobilization yields and activity. Its chemical activation with glyoxyl groups bound the enzyme covalently, which suppressed lixiviation and conferred higher pH and thermal stability (120‐fold than for the soluble enzyme), without observable reduction of activity/stability due to the presence of silica. The best balance between the immobilization yield (68%), activity (48%), and stability was achieved for Bacillus circulans β‐galactosidase immobilized on glyoxyl‐activated silica, without using stabilizing agents or modifying the enzyme. The enzyme stabilization after immobilization in glyoxyl‐activated silica was similar to that observed in macroporous agarose‐glyoxyl support, with the reported microbiological and mechanical advantages of inorganic supports. The whey lactolysis at pH 6.0 and 25°C by using this catalyst (1 mg ml^?1, 290 UI g^?1) was still 90%, even after 10 cycles of 10 min, in batch process but it could be also implemented on continuous processes at industrial level with similar results.     

Effect of radioprotective agents in sporulation medium on Bacillus subtilis spore resistance to hydrogen peroxide, wet heat and germicidal and environmentally relevant UV radiation

Aims: To determine the effects of cysteine, cystine, proline and thioproline as sporulation medium supplements on Bacillus subtilis spore resistance to hydrogen peroxide (H₂O₂), wet heat, and germicidal 254 nm and simulated environmental UV radiation. Methods and Results: Bacillus subtilis spores were prepared in a chemically defined liquid medium, with and without supplementation of cysteine, cystine, proline or thioproline. Spores produced with thioproline, cysteine or cystine were more resistant to environmentally relevant UV radiation at 280–400 and 320–400 nm, while proline supplementation had no effect. Spores prepared with cysteine, cystine or thioproline were also more resistant to H₂O₂ but not to wet heat or 254‐nm UV radiation. The increases in spore resistance attributed to the sporulation supplements were eliminated if spores were chemically decoated. Conclusions: Supplementation of sporulation medium with cysteine, cystine or thioproline increases spore resistance to solar UV radiation reaching the Earth’s surface and to H₂O₂. These effects were eliminated if the spores were decoated, indicating that alterations in coat proteins by different sporulation conditions can affect spore resistance to some agents. Significance and Impact of the Study: This study provides further evidence that the composition of the sporulation medium can have significant effects on B. subtilis spore resistance to UV radiation and H₂O₂. This knowledge provides further insight into factors influencing spore resistance and inactivation.     

A novel esterase from Bacillus subtilis (RRL 1789): purification and characterization of the enzyme

An esterase (EC 3.1.1.1) produced by an isolated strain of Bacillus subtilis RRL 1789 exhibited moderate to high enantioselectivity in the kinetic resolution of several substrates like aryl carbinols, hydroxy esters, and halo esters. The enzyme named as B. subtilis esterase (BSE), was purified to >95% purity with a specific activity of 944 U/mg protein and 12% overall yield. The purified enzyme is approximately 52 kDa monomer, maximally activity at 37 degrees C and pH 8.0 and fairly stable up to 55 degrees C. The enzyme does not exhibit the phenomenon of interfacial activation with tributyrin and p-nitrophenyl butyrate beyond the saturation concentration. The enzyme showed preference for triacyglycerols and esters of p-nitrophenol with short chain fatty acid. Presence of Ca2+ ions increases the activity of enzyme by approximately 20% but its presence does not have any influence on the thermostability of the enzyme. The enzyme is not a metalloprotein and belongs to the family of serine proteases. The N-terminal amino acid sequence of BSE determined, as Met-Thr-Pro-Glu-Iso-Val-Thr-Thr-Glu-Tyr-Gly- revealed similarity with the N-terminal amino acid sequence of p-nitrobenzylesterase of B. subtilis.     

Selection and genetic analysis of permethrin resistance in Amblyseius fallacis (Garman) (Acari: Phytoseiidae) from Ontario apple orchards

Gravid female phytoseiid mites, Amblyseius fallacis (Garman), were selected for resistance to permethrin using a table-top Petri dish (PD) technique. After 55 selections, the LC₅₀ of the R population increased 964-fold to 12 241 p.p.m. (PD) and 3.6-fold to 167 p.p.m. by a slide-dip (SD) method. A genetic analysis was conducted to examine the mode of inheritance by a series of single-pair reciprocal interstrain crosses and backcrosses of female F₁ progeny. Concentration-mortality regressions (PD) for parental populations showed a 69.4-fold difference between R and S strains. Regressions for F₁ females resulting from both interstrain crosses were intermediate between parental strains and not significantly different, showing no obvious maternal effect. Resistance in the R strain was not completely dominant or recessive and the estimated dominance, D, for the F₁ females from combined data of both reciprocal crosses was-0.18, for the female R x male S cross it was 0.24 and for the female S x male R cross it was-0.01. We concluded that more than one gene was responsible for the resistance in the selected R strain. No incompatibility was observed in any reciprocal interstrain crosses or backcrosses between the S strain and R strain.