Immobilization and stabilization of microbial lipases by multipoint covalent attachment on aldehyde-resin affinity: Application of the biocatalysts in biodiesel synthesis

Microbial lipase preparations from Thermomyces lanuginosus (TLL) and Pseudomonas fluorescens (PFL) were immobilized by multipoint covalent attachment on Toyopearl AF-amino-650M resin and the most active and thermal stable derivatives used to catalyze the transesterification reaction of babassu and palm oils with ethanol in solvent-free media. For this, different activating agents, mainly glutaraldehyde, glycidol and epichlorohydrin were used and immobilization parameters were estimated based on the hydrolysis of olive oil emulsion and butyl butyrate synthesis. TLL immobilized on glyoxyl-resin allowed obtaining derivatives with the highest hydrolytic activity (HA_der) and thermal stability, between 27 and 31 times more stable than the soluble lipase. Although PFL derivatives were found to be less active and thermally stables, similar formation of butyl butyrate concentrations were found for both TLL and PFL derivatives. The highest conversion into biodiesel was found in the transesterification of palm oil catalyzed by both TLL and PFL glyoxyl-derivatives.     

Improvement of the stability and selectivity of Rhizomucor miehei lipase immobilized on silica nanoparticles: Selective hydrolysis of fish oil using immobilized preparations

We report the effect of random and oriented immobilization of Rhizomucor miehei lipase (RML) on its functional properties. For this purpose, silica nanoparticles (MCM-41 and SBA-15) were prepared, characterized and functionalized by glycidyloxypropyl trimethoxysilane. Direct immobilization of RML on these supports was performed via the variety of amino acid residues on the surface of RML which promotes random immobilization. To perform oriented immobilization, partial modification of epoxy functionalized supports was carried out by introducing iminodiacetic acid groups followed by addition of Cu²⁺. In this way, immobilization is mainly directed via the most accessible histidine group, followed by intramolecular reaction of the other nucleophilic residues of the enzyme and the remaining epoxy groups on the support. The results showed higher thermal stability for immobilized derivatives compared to the soluble enzyme. Co-solvent stability of the derivatives was also studied in presence of six polar organic solvents (DMSO, THF, acetonitrile, 1-propanol, 2-propanol and dioxane). Influence of the immobilization procedure on activity and selectivity of the immobilized preparations was studied in selective hydrolysis of fish oil. All the derivatives discriminate between cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and cis-4,7,10,13,16,19-docosahexaenoic acid (DHA) in favor of EPA. Remarkable improvement in selectivity was obtained using oriented immobilization of RML.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

Two step ethanolysis: A simple and efficient way to improve the enzymatic biodiesel synthesis catalyzed by an immobilized–stabilized lipase from Thermomyces lanuginosus

In this study the immobilization and stabilization of a lipase from Thermomyces lanuginosus (TLL) on aldehyde-Lewatit (Lew-TLL) are described. TLL immobilization was rapid and over 90% of lipase activity was recovered after the immobilization. Lew-TLL was 10-fold more thermo stable than the commercial TLL preparation, Lipozyme TL-IM. The stabilized Lew-TLL was used for the enzymatic transesterification of ethanol and soybean oil. The transesterification was carried out following different strategies. First, with 7.5:1 molar ratio of ethanol:soybean oil, 15% immobilized enzyme and 4% water at 30 °C. In the presence of n-hexane, the transesterification reached 100% conversion, while in solvent-free system the yield was 75%. Second, at stoichiometric molar ratio, the yield was 70% conversion after 10 h of reaction in both systems. After this, transesterification was carried out by three stepwise additions of ethanol with a yield of 80% conversion, while a two step ethanolysis produced 100% conversion after 10 h of reaction in both solvent and solvent-free systems.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Application of a Burkholderia cepacia lipase-immobilized silica monolith to batch and continuous biodiesel production with a stoichiometric mixture of methanol and crude Jatropha oil

Background

The enzymatic production of biodiesel through alcoholysis of triglycerides has become more attractive because it shows potential in overcoming the drawbacks of chemical processes. In this study, we investigate the production of biodiesel from crude, non-edible Jatropha oil and methanol to characterize Burkholderia cepacia lipase immobilized in an n-butyl-substituted hydrophobic silica monolith. We also evaluate the performance of a lipase-immobilized silica monolith bioreactor in the continuous production of biodiesel.

Results

The Jatropha oil used contained 18% free fatty acids, which is problematic in a base-catalyzed process. In the lipase-catalyzed reaction, the presence of free fatty acids made the reaction mixture homogeneous and allowed bioconversion to proceed to 90% biodiesel yield after a 12 hour reaction time. The optimal molar ratio of methanol to oil was 3.3 to 3.5 parts methanol to one part oil, with water content of 0.6% (w/w). Further experiments revealed that B. cepacia lipase immobilized in hydrophobic silicates was sufficiently tolerant to methanol, and glycerol adsorbed on the support disturbed the reaction to some extent in the present reaction system. The continuous production of biodiesel was performed at steady state using a lipase-immobilized silica monolith bioreactor loaded with 1.67 g of lipase. The yield of 95% was reached at a flow rate of 0.6 mL/h, although the performance of the continuous bioreactor was somewhat below that predicted from the batch reactor. The bioreactor was operated successfully for almost 50 days with 80% retention of the initial yield.

Conclusions

The presence of free fatty acids originally contained in Jatropha oil improved the reaction efficiency of the biodiesel production. A combination of B. cepacia lipase and its immobilization support, n-butyl-substituted silica monolith, was effective in the production of biodiesel. This procedure is easily applicable to the design of a continuous flow-through bioreactor system.     

Immobilization of glycerol dehydrogenase on magnetic silica nanoparticles for conversion of glycerol to value-added 1,3-dihydroxyacetone

Abstract

Glycerol dehydrogenase (GlyDH) which oxidizes glycerol to the value-added chemical, 1,3-dihydroxyacetone, is of interest due to the oversupply of glycerol as a by-product of the biodiesel industry. To exploit the enzymatic oxidation of glycerol industrially, silica coated magnetic Fe₃O₄ nanoparticles were prepared and then activated with an amino-silane reagent for covalent immobilization of GlyDH via a glutaraldehyde linkage. At the optimal glutaraldehyde concentration of 0.05% (v/v), an enzyme loading of up to 57.5 mg/g-nanoparticles was achieved with 81.1% of the original activity retained. Reaction kinetic analysis indicated that the immobilized GlyDH had almost the same Michaelis-Menten constants for both NAD⁺ and glycerol as the free GlyDH did. However, after immobilization the turnover number k_cat of the GlyDH decreased from 164 s^?1 to 113 s^?1, and the reaction was 1.3-fold less sensitive to inhibition by DHA, which could compensate the decrease in k_cat. The immobilized GlyDH was also less sensitive to changes in pH and temperature, and showed a 5.3-fold improvement in thermal stability at 50^°C. Furthermore, excellent reusability was observed such that 10 cycles of re-use only led to 9% loss of enzyme activity.     

Immobilization of Rhizopus oryzae lipase on magnetic Fe3O4-chitosan beads and its potential in phenolic acids ester synthesis

A novel and simple method was developed for the preparation of magnetic Fe₃O₄ nanoparticles by chemical co-precipitation method and subsequent coating with 3-aminopropyltrimethoxysilane (APTMS) through silanization process. Magnetic Fe₃O₄-chitosan particles were prepared by the suspension cross-linking and covalent technique to be used in the application of magnetic carrier technology. The synthesized immobilization supports were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Using glutaraldehyde as the coupling agent, the lipase from R. oryzae was successfully immobilized onto the functionalized magnetic Fe₃O₄-chitosan beads. The results showed that 86.60% of R. oryzae lipase was bound on the synthesized immobilization support. This immobilized lipase was successfully used for the esterification of phenolic acid which resulted in esterification of phenolic acid in isooctane solvent reaction system for 8 consecutive cycles (totally 384 h), 72.6% of its initial activity was retained, indicating a high stability in pharmaceutical and industrial applications.     

Development of novel robust nanobiocatalyst for detergents formulations and the other applications of alkaline protease

Alkaline protease from alkaliphilic Bacillus sp. NPST-AK15 was immobilized onto functionalized and non-functionalized rattle-type magnetic core@mesoporous shell silica (RT-MCMSS) nanoparticles by physical adsorption and covalent attachment. However, the covalent attachment approach was superior for NPST-AK15 protease immobilization onto the activated RT-MCMSS-NH₂ nanoparticles and was used for further studies. In comparison to free protease, the immobilized enzyme exhibited a shift in the optimal temperature and pH from 60 to 65 °C and pH 10.5–11.0, respectively. While free protease was completely inactivated after treatment for 1 h at 60 °C, the immobilized enzyme maintained 66.5 % of its initial activity at similar conditions. The immobilized protease showed higher k _cat and K _m , than the soluble enzyme by about 1.3-, and 1.2-fold, respectively. In addition, the results revealed significant improvement of NPST-AK15 protease stability in variety of organic solvents, surfactants, and commercial laundry detergents, upon immobilization onto activated RT-MCMSS-NH₂ nanoparticles. Importantly, the immobilized protease maintained significant catalytic efficiency for ten consecutive reaction cycles, and was separated easily from the reaction mixture using an external magnetic field. To the best of our knowledge this is the first report about protease immobilization onto rattle-type magnetic core@mesoporous shell silica nanoparticles that also defied activity-stability tradeoff. The results clearly suggest that the developed immobilized enzyme system is a promising nanobiocatalyst for various bioprocess applications requiring a protease.     

Enzymatic synthesis of ethyl esters from waste oil using mixtures of lipases in a plug‐flow packed‐bed continuous reactor

This work describes the continuous synthesis of ethyl esters via enzymatic catalysis on a packed‐bed continuous reactor, using mixtures of immobilized lipases (combi‐lipases) of Candida antarctica (CALB), Thermomyces lanuginosus (TLL), and Rhizomucor miehei (RML). The influence of the addition of glass beads to the reactor bed, evaluation of the use of different solvents, and flow rate on reaction conditions was studied. All experiments were conducted using the best combination of lipases according to the fatty acid composition of the waste oil (combi‐lipase composition: 40% of TLL, 35% of CALB, and 25% of RML) and soybean oil (combi‐lipase composition: 22.5% of TLL, 50% of CALB, and 27.5% of RML). The best general reaction conditions were found to be using tert‐butanol as solvent, and the flow rate of 0.08 mL min^?1. The combi‐lipase reactors operating at steady state for over 30 days (720 h), kept conversion yields of ～50%, with average productivity of 1.94 g_{ethyl esters} h^?1, regardless of the type of oil in use. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:952–959, 2018     

Geranyl acetate synthesis catalyzed by Thermomyces lanuginosus lipase immobilized on electrospun polyacrylonitrile nanofiber membrane

Isolated Thermomyces lanuginosus lipase (TLL) was immobilized by different protocols on the polyacrylonitrile nanofibers membrane. The conditions for immobilization of TLL were optimized by investigating effect of protein concentration, time and temperature on the extent of immobilization. The effect of immobilization on the catalytic activity and stability of lipase was studied thoroughly. The immobilized TLL was used as biocatalyst for geranyl acetate synthesis with geraniol and vinyl acetate as substrates and their performance was compared with free enzyme. The TLL immobilized by physical adsorption shows higher transesterification and hydrolytic activities than that of covalently linked or native TLL. There was 32 and 9 fold increase in transesterification activity of TLL immobilized by adsorption and covalent bonding, while hydrolytic activity increases only by 3.6 and 1.8 fold respectively. The optimum conditions for immobilization in both the cases were immobilization time 90–150 min, temperature 45 °C and protein concentration of 2 mg/ml. The percentage conversion of ester was more than 90% and 66% in case of physically adsorbed and covalently bonded enzyme respectively as compared to native one. However, covalently immobilized TLL shows higher operational stability than native and physically adsorbed TLL.     

Degradation of Carbazole by Microbial Cells Immobilized in Magnetic Gellan Gum Gel Beads

Polycyclic aromatic heterocycles, such as carbazole, are environmental contaminants suspected of posing human health risks. In this study, we investigated the degradation of carbazole by immobilized Sphingomonas sp. strain XLDN2-5 cells. Four kinds of polymers were evaluated as immobilization supports for Sphingomonas sp. strain XLDN2-5. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, Fe₃O₄ nanoparticles were prepared by a coprecipitation method, and the average particle size was about 20 nm with 49.65-electromagnetic-unit (emu) g⁻¹ saturation magnetization. When the mixture of gellan gel and the Fe₃O₄ nanoparticles served as an immobilization support, the magnetically immobilized cells were prepared by an ionotropic method. The biodegradation experiments were carried out by employing free cells, nonmagnetically immobilized cells, and magnetically immobilized cells in aqueous phase. The results showed that the magnetically immobilized cells presented higher carbazole biodegradation activity than nonmagnetically immobilized cells and free cells. The highest biodegradation activity was obtained when the concentration of Fe₃O₄ nanoparticles was 9 mg ml⁻¹ and the saturation magnetization of magnetically immobilized cells was 11.08 emu g⁻¹. Additionally, the recycling experiments demonstrated that the degradation activity of magnetically immobilized cells increased gradually during the eight recycles. These results support developing efficient biocatalysts using magnetically immobilized cells and provide a promising technique for improving biocatalysts used in the biodegradation of not only carbazole, but also other hazardous organic compounds.     

Evaluation of biodiesel production using lipase immobilized on magnetic silica nanocomposite particles of various structures

Nonporous and mesoporous silica-coated magnetite cluster nanocomposites particles were fabricated with various silica structures in order to develop a desired carrier for the lipase immobilization and subsequent biodiesel production. Lipase from Pseudomonas cepacia was covalently bound to the amino-functionalized particles using glutaraldehyde as a coupling agent. The hybrid systems that were obtained exhibited high stability and easy recovery regardless of the silica structure, following the application of an external magnetic field. The immobilized lipases were then used as the recoverable biocatalyst in a transesterification reaction to convert the soybean oil to biodiesel with methanol. Enzyme immobilization led to higher stabilities and conversion values as compared to what was obtained by the free enzyme. Furthermore, the silica structure had a significant effect on stability and catalytic performance of immobilized enzymes. In examining the reusability of the biocatalysts, the immobilized lipases still retained approximately 55% of their initial conversion capability following 5 times of reuse.     

Immobilization of Rhizomucor miehei lipase onto montmorillonite K-10 and polyvinyl alcohol gel

Abstract

Immobilization of enzymes from different sources on various supports in designed systems increases enzymes’ stability by protecting the active site of it from undesired effect of reaction environment. Also, immobilization decreases the cost of separation and facilities the reuse of the enzymes. Therefore, the design of new immobilization enzyme preparations has been an inevitable area of modern biotechnology. Herein, Rhizomucor miehei lipase (RML) was immobilized on montmorillonite K-10 (MMT-RML) by adsorption and in polyvinyl alcohol (PVA-RML) by entrapment to obtain a more stable and active lipase preparation. The free and immobilized lipase preparations were characterized for p-nitrophenyl palmitate hydrolysis. The apparent Michaelis–Menten (K_mapp) constant was almost the same for the free RML and PVA-RML, whereas the corresponding value was 17.7-fold lower for MMT-RML. PVA-RML and MMT-RML have shown a 1.1 and 23.8 folds higher catalytic efficiency, respectively, than that of the free RML. The half-lives of PVA-RML and MMT-RML were found to be 7.4 and 3.4 times longer than the free RML at 35?°C, respectively. PVA-RML and MMT-RML maintained 65% and 87% of their initial activities after four reuses. These results showed that the catalytic performance of RML has improved significantly by immobilization.     

Lipase from Thermomyces lanuginosus: Uses and prospects as an industrial biocatalyst

The lipase from Thermomyces laguginosus (formerly Humicola laguginosa) (TLL) is a basophilic and noticeably thermostable enzyme, commercially available in both soluble and immobilized form. Although initially oriented toward the food industry, the enzyme has found applications in many different industrial areas, from biodiesel production to fine chemicals (mainly in enantio and regioselective or specific processes). This review intends to show some of the most relevant aspects of the use of this interesting enzyme. After checking the enzyme features, some of the most efficient methods of TLL immobilization will be commented. Finally, the main uses of the enzyme will be revised, with special emphasis in the modification of fats and oils, production of biodiesel, resolution of racemic mixtures, enantioselective hydrolysis of prochiral esters and regioselective process involving sugar preparations. In many instances, TLL has been compared to other lipases, the advantages or disadvantages of the enzyme will be discussed.     

Rhus vernicifera Laccase Immobilization on Magnetic Nanoparticles to Improve Stability and Its Potential Application in Bisphenol A Degradation

In the present study, Rhus vernicifera laccase (RvLac) was immobilized through covalent methods on the magnetic nanoparticles. Fe₂O₃ and Fe₃O₄ nanoparticles activated by 3-aminopropyltriethoxysilane followed with glutaraldehyde showed maximum immobilization yields and relative activity up to 81.4 and 84.3% at optimum incubation and pH of 18 h and 5.8, respectively. The maximum RvLac loading of 156 mg/g of support was recorded on Fe₂O₃ nanoparticles. A higher optimum pH and temperature of 4.0 and 45 °C were noted for immobilized enzyme compared to values of 3.5 and 40 °C for free form, respectively. Immobilized RvLac exhibited better relative activity profiles at various pH and temperature ranges. The immobilized enzyme showed up to 16-fold improvement in the thermal stability, when incubated at 60 °C, and retained up to 82.9% of residual activity after ten cycles of reuses. Immobilized RvLac exhibited up to 1.9-fold higher bisphenol A degradation efficiency potential over free enzyme. Previous reports have demonstrated the immobilization of RvLac on non-magnetic supports. This study has demonstrated that immobilization of RvLac on magnetic nanoparticles is very efficient especially for achieving high loading, better pH and temperature profiles, and thermal- and solvents-stability, high reusability, and higher degradation of bisphenol A.     

Immobilization and characterization of horseradish peroxidase into chitosan and chitosan/PEG nanoparticles: A comparative study

Chitosan (CS) is considered a suitable biomaterial for enzyme immobilization. CS combination with polyethylene glycol (PEG) can improve the biocompatibility and the properties of the immobilized system. Thus, the present work investigated the effect of the PEG in the horseradish peroxidase (HRP) immobilization into chitosan nanoparticles from the morphological, physicochemical, and biochemical perspectives. CS and CS/PEG nanoparticles were obtained by ionotropic gelation and provided immobilization efficiencies (IE) of 65.8 % and 51.7 % and activity recovery (AR) of 76.4 % and 60.4 %, respectively. The particles were characterized by DLS, ZP, SEM, FTIR, TGA and DSC analysis. Chitosan nanoparticles showed size around 135 nm and increased to 229 nm after PEG addition and HRP immobilization. All particles showed positive surface charges (20−28 mV). Characterizations suggest nanoparticles formation and effective immobilization process. Similar values for optimum temperature and pH for immobilized HRP into both nanoparticles were found (45 °C, 7.0). V_max value decreased by 5.07 to 3.82 and 4.11 mM/min and K_M increased by 17.78 to 18.28 and 19.92 mM for free and immobilized HRP into chitosan and chitosan/PEG nanoparticles, respectively. Another biochemical parameters (K_cat, K_e, and K_α) evaluated showed a slight reduction for the immobilized enzyme in both nanoparticles compared to the free enzyme.     

Improvement of activity and stability of Rhizomucor miehei lipase by immobilization on nanoporous aluminium oxide and potassium sulfate microcrystals and their applications in the synthesis of aroma esters

In this study, Rhizomucor miehei lipase (RML) was immobilized on the hexagonally-ordered nanoporous aluminium oxide membranes (RML-Al₂O₃-NP) by adsorption and as protein-coated microcrystals (RML-PCMCs) by simultaneously precipitating RML on micron-sized potassium sulfate crystals (K₂SO₄) in pre-chilled acetone. The hydrolytic activities of immobilized lipase preparations were investigated in terms of p-nitrophenyl palmitate hydrolysis and their esterification activities were examined for the synthesis of some aroma esters such as butyl acetate, isoamyl acetate, hexyl acetate, heptyl acetate, and geranyl acetate. The immobilization yields were 33.8 and 25.1%, respectively for RML immobilized on Al₂O₃-NP membranes and potassium sulfate crystals. The catalytic efficiency ratios of RML-Al₂O₃-NP and RML-PCMCs were 2.3- and 3.9-fold higher than that of the free lipase, respectively in terms of hydrolytic activity. The free lipase was stabilized as 4.1- and 10.5-fold, respectively at 40 and 50?°C when immobilized on Al₂O₃-NP. The corresponding stabilization factors were 4.6- and 12.8-fold higher for RML-PCMCs. RML-Al₂O₃-NP and RML-PCMCs maintained 84 and 86% of their initial hydrolytic activities, respectively after 10 reuses. Of the synthesized aroma esters, the highest yield was obtained for the geranyl acetate. After 4?h reaction time, no geraniol was detected in the preparative-scale (196?g/L) synthesis of geranyl acetate for both the immobilized lipases when the initial geraniol amount, vinyl acetate amount, RML-PCMCs amount, and reaction temperature values were 1?mmol, 3?mmol, 100?mg (or 300?mg RML-Al₂O₃-NP), and 50?°C, respectively. These results show that the immobilization of R. miehei lipase by adsorption on nanoporous aluminium oxide and as protein-coated microcrystals leads to the obtention of highly stable, catalytically more active, and reusable lipase preparations.     

Biodiesel production from pomace oil by using lipase immobilized onto olive pomace

In the present work, microbial lipase from Thermomyces lanuginosus was immobilized by covalent binding onto olive pomace. Immobilized support material used to produce biodiesel with pomace oil and methanol. The properties of the support and immobilized derivative were evaluated by scanning electron microscopy (SEM). The maximum immobilization of T. lanuginosus was obtained as 18.67 mg/g support and the highest specific activity was 10.31 U/mg protein. The properties of immobilized lipase were studied. The effects of protein concentration, pH and buffer concentration on the immobilization and lipase activity were investigated. Biodiesel production using the immobilized lipase was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 93% at 25 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

Immobilization and characterization of human carbonic anhydrase I on amine functionalized magnetic nanoparticles

In this study, we synthesized magnetic nanoparticles (MNPs) by co-precipitation method. After that, silica coating with tetraethyl orthosilicate (TEOS) (SMNPs), amine functionalization of silica coated MNPs (ASMNPs) by using 3-aminopropyltriethoxysilane (APTES) were performed, respectively. After activation with glutaraldehyde (GA) of ASMNPs, human carbonic anhydrase (hCA I) was immobilized on ASMNPs. The characterization of nanoparticles was performed by transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The immobilization conditions such as GA concentration, activation time of support with GA, enzyme amount, enzyme immobilization time were optimized. In addition of that, optimum conditions for activity, kinetic parameters (K_m, V_max, k_cat, kcat/K_m), thermal stability, storage stability and reusability of immobilized enzyme were determined.The immobilized enzyme activity was optimum at pH 8.0 and 25 °C. The K_m value of the immobilized enzyme (1.02 mM) was higher than the free hCA I (0.48 mM). After 40 days incubation at 4 °C and 25 °C, the immobilized hCA I sustained 89% and 85% of its activity, respectively. Also, it sustained 61% of its initial activity after 13 cycles. Such results revealed good potential of immobilized enzyme for various applications.