Aerodynamic performance of a hovering hawkmoth with flexible wings: a computational approach

Insect wings are deformable structures that change shape passively and dynamically owing to inertial and aerodynamic forces during flight. It is still unclear how the three-dimensional and passive change of wing kinematics owing to inherent wing flexibility contributes to unsteady aerodynamics and energetics in insect flapping flight. Here, we perform a systematic fluid-structure interaction based analysis on the aerodynamic performance of a hovering hawkmoth, Manduca, with an integrated computational model of a hovering insect with rigid and flexible wings. Aerodynamic performance of flapping wings with passive deformation or prescribed deformation is evaluated in terms of aerodynamic force, power and efficiency. Our results reveal that wing flexibility can increase downwash in wake and hence aerodynamic force: first, a dynamic wing bending is observed, which delays the breakdown of leading edge vortex near the wing tip, responsible for augmenting the aerodynamic force-production; second, a combination of the dynamic change of wing bending and twist favourably modifies the wing kinematics in the distal area, which leads to the aerodynamic force enhancement immediately before stroke reversal. Moreover, an increase in hovering efficiency of the flexible wing is achieved as a result of the wing twist. An extensive study of wing stiffness effect on aerodynamic performance is further conducted through a tuning of Young's modulus and thickness, indicating that insect wing structures may be optimized not only in terms of aerodynamic performance but also dependent on many factors, such as the wing strength, the circulation capability of wing veins and the control of wing movements.     

Investigation of Unsteady Aerodynamic Characteristics of a Seagull Wing in Level Flight

Unsteady aerodynamic characteristics of a seagull wing in level flight are investigated using a boundary element method.Anew no-penetration boundary condition is imposed on the surface of the wing by considering its deformation.The geometry andkinematics of the seagull wing are reproduced using the functions and data in the previously published literature.The proposedmethod is validated by comparing the computed results with the published data in the literature.The unsteady aerodynamicscharacteristics of the seagull wing are investigated by changing flapping frequency and advance ratio.It is found that the peakvalues of aerodynamic coefficients increase with the flapping frequency.The thrust and drag generations are complicatedfunctions of frequency and wing stroke motions.The lift is inversely proportional to the advance ratio.The effects of severalflapping modes on the lift and induced drag(or thrust)generation are also investigated.Among three single modes(flapping,folding and lead & lag),flapping generates the largest lift and can produce thrust alone.For three combined modes,both flapping/foldingand flapping/lead & lag can produce lift and thrust larger than the flapping-alone mode can.Folding is shown toincrease thrust when combined with flapping,whereas lead & lag has an effect of increasing the lift when also combined withflapping.When three modes are combined together,the bird can obtain the largest lift among the investigated modes.Eventhough the proposed method is limited to the inviscid flow assumption,it is believed that this method can be used to the designof flapping micro aerial vehicle.     

Numerical investigation of the aerodynamic characteristics of a hovering Coleopteran insect

The aerodynamic characteristics of the Coleopteran beetle species Epilachna quadricollis, a species with flexible hind wings and stiff elytra (fore wings), are investigated in terms of hovering flight. The flapping wing kinematics of the Coleopteran insect are modeled through experimental observations with a digital high-speed camera and curve fitting from an ideal harmonic kinematics model. This model numerically simulates flight by estimating a cross section of the wing as a two-dimensional elliptical plane. There is currently no detailed study on the role of the elytron or how the elytron-hind wing interaction affects aerodynamic performance. In the case of hovering flight, the relatively small vertical or horizontal forces generated by the elytron suggest that the elytron makes no significant contribution to aerodynamic force.     

Wing flexibility enhances load-lifting capacity in bumblebees

The effect of wing flexibility on aerodynamic force production has emerged as a central question in insect flight research. However, physical and computational models have yielded conflicting results regarding whether wing deformations enhance or diminish flight forces. By experimentally stiffening the wings of live bumblebees, we demonstrate that wing flexibility affects aerodynamic force production in a natural behavioural context. Bumblebee wings were artificially stiffened in vivo by applying a micro-splint to a single flexible vein joint, and the bees were subjected to load-lifting tests. Bees with stiffened wings showed an 8.6 per cent reduction in maximum vertical aerodynamic force production, which cannot be accounted for by changes in gross wing kinematics, as stroke amplitude and flapping frequency were unchanged. Our results reveal that flexible wing design and the resulting passive deformations enhance vertical force production and load-lifting capacity in bumblebees, locomotory traits with important ecological implications.     

Centripetal Acceleration Reaction: An Effective and Robust Mechanism for Flapping Flight in Insects

Despite intense study by physicists and biologists, we do not fully understand the unsteady aerodynamics that relate insect wing morphology and kinematics to lift generation. Here, we formulate a force partitioning method (FPM) and implement it within a computational fluid dynamic model to provide an unambiguous and physically insightful division of aerodynamic force into components associated with wing kinematics, vorticity, and viscosity. Application of the FPM to hawkmoth and fruit fly flight shows that the leading-edge vortex is the dominant mechanism for lift generation for both these insects and contributes between 72–85% of the net lift. However, there is another, previously unidentified mechanism, the centripetal acceleration reaction, which generates up to 17% of the net lift. The centripetal acceleration reaction is similar to the classical inviscid added-mass in that it depends only on the kinematics (i.e. accelerations) of the body, but is different in that it requires the satisfaction of the no-slip condition, and a combination of tangential motion and rotation of the wing surface. Furthermore, the classical added-mass force is identically zero for cyclic motion but this is not true of the centripetal acceleration reaction. Furthermore, unlike the lift due to vorticity, centripetal acceleration reaction lift is insensitive to Reynolds number and to environmental flow perturbations, making it an important contributor to insect flight stability and miniaturization. This force mechanism also has broad implications for flow-induced deformation and vibration, underwater locomotion and flows involving bubbles and droplets.     

Simulating avian wingbeat kinematics

Inverse dynamics methods are used to simulate avian wingbeats in varying flight conditions. A geometrically scalable multi-segment bird model is constructed, and optimisation techniques are employed to determine segment motions that generate desired aerodynamic force coefficients with minimal mechanical power output. The results show that wingbeat kinematics vary gradually with changes in cruise speed, which is consistent with experimental data. Optimised solutions for cruising flight of the pigeon suggest that upstroke wing retraction is used as a method of saving energy. Analysis of the aerodynamic force coefficient variation in high and low speed cruise leads to the proposal that a suitable gait metric should include both thrust and lift generation during each half-stroke.     

Biomechanics and physiology of gait selection in flying birds

Two wing-beat gaits, distinguished by the presence or absence of lift production during the upstroke, are currently used to describe avian flight. Vortex-visualization studies indicate that lift is produced only during the downstroke in the vortex-ring gait and that lift is produced continuously in the continuous-vortex gait. Tip-reversal and feathered upstrokes represent different forms of vortex-ring gait distinguished by wing kinematics. Useful aerodynamic forces may be produced during tip-reversal upstroke in slow flight and during a feathered upstroke in fast flight, but it is probable that downstroke forces are much greater in magnitude. Uncertainty about the function of these types of upstroke may be resolved when more data are available on wake structure in different flight speeds and modes. Inferring from wing kinematics and available data on wake structure, birds with long wings or wings of high aspect ratio use a vortex-ring gait with tip-reversal upstroke at slow speeds, a vortex-ring gait with a feathered upstroke at intermediate speeds, and a continuous-vortex gait at fast speeds. Birds with short wings or wings of low aspect ratio use a vortex-ring gait with a feathered upstroke at all speeds. Regardless of wing shape, species tend to use a vortex-ring gait for acceleration and a continuous-vortex gait for deceleration. Some correlations may exist between gait selection and the function of the muscular and respiratory system. However, overall variation in wing kinematics, muscle activity, and respiratory activity is continuous rather than categorical. To further our understanding of gait selection in flying birds, it is important to test whether upstroke function varies in a similar manner. Transitions between lifting and nonlifting upstrokes may be more subtle and gradual than implied by a binomial scheme of classification.     

A modified blade element theory for estimation of forces generated by a beetle-mimicking flapping wing system

We present an unsteady blade element theory (BET) model to estimate the aerodynamic forces produced by a freely flying beetle and a beetle-mimicking flapping wing system. Added mass and rotational forces are included to accommodate the unsteady force. In addition to the aerodynamic forces needed to accurately estimate the time history of the forces, the inertial forces of the wings are also calculated. All of the force components are considered based on the full three-dimensional (3D) motion of the wing. The result obtained by the present BET model is validated with the data which were presented in a reference paper. The difference between the averages of the estimated forces (lift and drag) and the measured forces in the reference is about 5.7%. The BET model is also used to estimate the force produced by a freely flying beetle and a beetle-mimicking flapping wing system. The wing kinematics used in the BET calculation of a real beetle and the flapping wing system are captured using high-speed cameras. The results show that the average estimated vertical force of the beetle is reasonably close to the weight of the beetle, and the average estimated thrust of the beetle-mimicking flapping wing system is in good agreement with the measured value. Our results show that the unsteady lift and drag coefficients measured by Dickinson et al are still useful for relatively higher Reynolds number cases, and the proposed BET can be a good way to estimate the force produced by a flapping wing system.     

Two-and Three-Dimensional Simulations of Beetle Hind Wing Flapping during Free Forward Flight

Aerodynamic characteristic of the beetle, Trypoxylus dichotomus, which has a pair of elytra (forewings) and hind wings, is numerically investigated. Based on the experimental results of wing kinematics, two-dimensional (2D) and three-dimensional (3D) computational fluid dynamic simulations were carried out to reveal aerodynamic performance of the hind wing. The roles of the spiral Leading Edge Vortex (LEV) and the spanwise flow were clarified by comparing 2D and 3D simulations. Mainly due to pitching down of chord line during downstroke in highly inclined stroke plane, relatively high averaged thrust was produced in the free forward flight of the beetle. The effects of the local corrugation and the camber variation were also investigated for the beetle's hind wings. Our results show that the camber variation plays a significant role in improving both lift and thrust in the flapping. On the other hand, the local corrugation pattern has no significant effect on the aerodynamic force due to large angle of attack during flapping.     

Time-Varying Wing-Twist Improves Aerodynamic Efficiency of Forward Flight in Butterflies

Insect wings can undergo significant chordwise (camber) as well as spanwise (twist) deformation during flapping flight but the effect of these deformations is not well understood. The shape and size of butterfly wings leads to particularly large wing deformations, making them an ideal test case for investigation of these effects. Here we use computational models derived from experiments on free-flying butterflies to understand the effect of time-varying twist and camber on the aerodynamic performance of these insects. High-speed videogrammetry is used to capture the wing kinematics, including deformation, of a Painted Lady butterfly (Vanessa cardui) in untethered, forward flight. These experimental results are then analyzed computationally using a high-fidelity, three-dimensional, unsteady Navier-Stokes flow solver. For comparison to this case, a set of non-deforming, flat-plate wing (FPW) models of wing motion are synthesized and subjected to the same analysis along with a wing model that matches the time-varying wing-twist observed for the butterfly, but has no deformation in camber. The simulations show that the observed butterfly wing (OBW) outperforms all the flat-plate wings in terms of usable force production as well as the ratio of lift to power by at least 29% and 46%, respectively. This increase in efficiency of lift production is at least three-fold greater than reported for other insects. Interestingly, we also find that the twist-only-wing (TOW) model recovers much of the performance of the OBW, demonstrating that wing-twist, and not camber is key to forward flight in these insects. The implications of this on the design of flapping wing micro-aerial vehicles are discussed.     

On the Estimation of Time Dependent Lift of a European Starling (Sturnus vulgaris) during Flapping Flight

We study the role of unsteady lift in the context of flapping wing bird flight. Both aerodynamicists and biologists have attempted to address this subject, yet it seems that the contribution of unsteady lift still holds many open questions. The current study deals with the estimation of unsteady aerodynamic forces on a freely flying bird through analysis of wingbeat kinematics and near wake flow measurements using time resolved particle image velocimetry. The aerodynamic forces are obtained through two approaches, the unsteady thin airfoil theory and using the momentum equation for viscous flows. The unsteady lift is comprised of circulatory and non-circulatory components. Both approaches are presented over the duration of wingbeat cycles. Using long-time sampling data, several wingbeat cycles have been analyzed in order to cover both the downstroke and upstroke phases. It appears that the unsteady lift varies over the wingbeat cycle emphasizing its contribution to the total lift and its role in power estimations. It is suggested that the circulatory lift component cannot assumed to be negligible and should be considered when estimating lift or power of birds in flapping motion.     

Kinematic plasticity during flight in fruit bats: individual variability in response to loading

All bats experience daily and seasonal fluctuation in body mass. An increase in mass requires changes in flight kinematics to produce the extra lift necessary to compensate for increased weight. How bats modify their kinematics to increase lift, however, is not well understood. In this study, we investigated the effect of a 20% increase in mass on flight kinematics for Cynopterus brachyotis, the lesser dog-faced fruit bat. We reconstructed the 3D wing kinematics and how they changed with the additional mass. Bats showed a marked change in wing kinematics in response to loading, but changes varied among individuals. Each bat adjusted a different combination of kinematic parameters to increase lift, indicating that aerodynamic force generation can be modulated in multiple ways. Two main kinematic strategies were distinguished: bats either changed the motion of the wings by primarily increasing wingbeat frequency, or changed the configuration of the wings by increasing wing area and camber. The complex, individual-dependent response to increased loading in our bats points to an underappreciated aspect of locomotor control, in which the inherent complexity of the biomechanical system allows for kinematic plasticity. The kinematic plasticity and functional redundancy observed in bat flight can have evolutionary consequences, such as an increase potential for morphological and kinematic diversification due to weakened locomotor trade-offs.     

Structural dynamics and aerodynamics measurements of biologically inspired flexible flapping wings

Flapping wing flight as seen in hummingbirds and insects poses an interesting unsteady aerodynamic problem: coupling of wing kinematics, structural dynamics and aerodynamics. There have been numerous studies on the kinematics and aerodynamics in both experimental and computational cases with both natural and artificial wings. These studies tend to ignore wing flexibility; however, observation in nature affirms that passive wing deformation is predominant and may be crucial to the aerodynamic performance. This paper presents a multidisciplinary experimental endeavor in correlating a flapping micro air vehicle wing's aeroelasticity and thrust production, by quantifying and comparing overall thrust, structural deformation and airflow of six pairs of hummingbird-shaped membrane wings of different properties. The results show that for a specific spatial distribution of flexibility, there is an effective frequency range in thrust production. The wing deformation at the thrust-productive frequencies indicates the importance of flexibility: both bending and twisting motion can interact with aerodynamic loads to enhance wing performance under certain conditions, such as the deformation phase and amplitude. By measuring structural deformations under the same aerodynamic conditions, beneficial effects of passive wing deformation can be observed from the visualized airflow and averaged thrust. The measurements and their presentation enable observation and understanding of the required structural properties for a thrust effective flapping wing. The intended passive responses of the different wings follow a particular pattern in correlation to their aerodynamic performance. Consequently, both the experimental technique and data analysis method can lead to further studies to determine the design principles for micro air vehicle flapping wings.     

Design and Demonstration of Insect Mimicking Foldable Artificial Wing Using Four-Bar Linkage Systems

In this work, we develop an artificial foldable wing that mimics the hind wing of a beetle （Allomyrina dichotoma）. In real flight, the beetle unfolds forewings and hind wings, and maintains the unfolded configuration unless it is exhausted. The artificial wing has to be able to maintain a fully unfolded configuration while flapping at a desirable flapping frequency. The artificial foldable hind wing developed in this work is based on two four-bar linkages which adapt the behaviors of the beetle＇s hind wing. The four-bar-linkages are designed to mimic rotational motion of the wing base and the vein folding/unfolding motion of the beetle＇s hind wing. The behavior of the artificial wings, which are installed in a flapping-wing system, is observed using a high-speed camera. The observation shows that the wing could maintain a fully unfolded configuration during flapping motion. A series of thrust measurements are also conducted to estimate the force generated by the flapping-wing system with foldable artificial wings. Although the artificial foldable wings give added burden to the flapping-wing system because of its weight, the thrust measurement results show that the flapping-wing system could still generate reasonable thrust.     

Aerodynamic Interactions Between Wing and Body of a Model Insect in Forward Flight and Maneuvers

The aerodynamic interactions between the body and the wings of a model insect in forward flight and maneuvers are studied using the method of numerically solving the Navier-Stokes equations over moving overset grids. Three cases are considered, including a complete insect, wing pair only and body only. By comparing the results of these cases, the interaction effect between the body and the wing pair can be identified. The changes in the force and moment coefficients of the wing pair due to the presence of the body are less than 4.5% of the mean vertical force coefficient of the model insect; the changes in the aerodynamic force coefficients of the body due to the presence of the wings are less than 5.0% of the mean vertical force coefficient of the model insect. The results of this paper indicate that in studying the aerodynamics and flight dynamics of a flapping insect in forward flight or maneuver, separately computing (or measuring) the aerodynamic forces and moments on the wing pair and on the body could be a good approximation.     

On mathematical modelling of insect flight dynamics in the context of micro air vehicles

We discuss some aspects of mathematical modelling relevant to the dynamics of insect flight in the context of insect-like flapping-wing micro air vehicles (MAVs). MAVs are small flying vehicles developed to reconno?tre in confined spaces. This requires power-efficient, highly-manoeuvrable, low-speed flight with stable hover. All of these attributes are present in insect flight and hence the focus on reproducing the functionality of insect flight by engineering means. Empirical research on insect flight dynamics is limited by experimental difficulties. Force and moment measurements require tethering the animal whose behaviour may then differ from free flight. The measurements are made when the insect actively tries to control its flight, so that its open-loop dynamics cannot be observed. Finally, investigation of the sensory-motor system responsible for flight is even more challenging. Despite these difficulties, much empirical progress has been made recently. Further progress, especially in the context of MAVs, can be achieved by the complementary information derived from appropriate mathematical modelling. The focus here is on a means of computing the data not easily available from experiments and also on making mathematical predictions to suggest new experiments. We consider two aspects of mathematical modelling for insect flight dynamics. The first one is theoretical (computational), as opposed to empirical, generation of the aerodynamic data required for the six-degrees-of-freedom equations of motion. For this purpose we first explain insect wing kinematics and the salient features of the corresponding flow. In this context, we show that aerodynamic modelling is a feasible option for certain flight regimes, focusing on a successful example of modelling hover. Such modelling progresses from the first principles of fluid mechanics, but relies on simplifications justified by the known flow phenomenology and/or geometric and kinematic symmetries. This is relevant to six types of fundamental manoeuvres, which we define as those flight conditions for which only one component of the translational and rotational body velocities is nonzero and constant. The second aspect of mathematical modelling for insect flight dynamics addressed here deals with the periodic character of the aerodynamic force and moment production. This leads to consideration of the types of solutions of nonlinear equations forced by nonlinear oscillations. In particular, the mechanism of synchronization seems relevant and should be investigated further.     

Flight physiology of migrating Urania fulgens (Uraniidae) moths: kinematics and aerodynamics of natural free flight

Summary Air speeds and wing kinematics were determined for the Neotropical moth Urania fulgens in natural migratory flight over Lake Gatun, Republic of Panama. Morphological parameters are presented for the same insects filmed in free flight. A quasi-steady aerodynamic analysis was used to show that unsteady mechanisms of lift generation are probably not necessary to produce the forces necessary for fast forward flight. Mechanical power requirements of forward flight were estimated from the biomechanical and morphological data. Over an airspeed range of 1.5 to 4.5 m/s, the mechanical power required to fly is predicted to increase dramatically with forward speed. A comparison of estimated metabolic rates with endogenous lipid reserves suggests that U. fulgens feeds extensively on flower nectar during migration from Central into South America.     

Measurement of Force Produced by an Insect-Mimicking Flapping-Wing System

We present a new version of a compact insect-mimicking flapping-wing system driven by a small motor, and suggest two testing approaches to measure the thrust or lift generated by a flapping-wing system. Flapping performance tests show the proposed flapping-wing system, which is powered by an onboard battery (lithium, 3.7 V, 180 mAh), could flap at flapping frequency of 25 Hz, and produce an average thrust or lift of about 3 g. In a wired-flight test under constrained conditions, the flapping-wing system could fly at an average forward velocity of 700 mm·s^?1. For measuring the average thrust or lift produced by the flapping-wing system, we propose two testing approaches of wired-flight test and swing test with the aid of a high-speed camera and they are compared with a load cell measurement. The average thrust or lift values from the two proposed approaches agree well with the average thrust or lift values measured by a load cell.     

Vortexlet models of flapping flexible wings show tuning for force production and control

Insect wings are compliant structures that experience deformations during flight. Such deformations have recently been shown to substantially affect induced flows, with appreciable consequences to flight forces. However, there are open questions related to the aerodynamic mechanisms underlying the performance benefits of wing deformation, as well as the extent to which such deformations are determined by the boundary conditions governing wing actuation together with mechanical properties of the wing itself. Here we explore aerodynamic performance parameters of compliant wings under periodic oscillations, subject to changes in phase between wing elevation and pitch, and magnitude and spatial pattern of wing flexural stiffness. We use a combination of computational structural mechanics models and a 2D computational fluid dynamics approach to ask how aerodynamic force production and control potential are affected by pitch/elevation phase and variations in wing flexural stiffness. Our results show that lift and thrust forces are highly sensitive to flexural stiffness distributions, with performance optima that lie in different phase regions. These results suggest a control strategy for both flying animals and engineering applications of micro-air vehicles.     

Comparison of Aerodynamic Forces and Moments Calculated by Three-dimensional Unsteady Blade Element Theory and Computational Fluid Dynamics

In previous work,we modified blade element theory by implementing three-dimensional wing kinematics and modeled the unsteady aerodynamic effects by adding the added mass and rotational forces.This method is referred to as Unsteady Blade Element Theory (UBET).A comparison between UBET and Computational Fluid Dynamics (CFD) for flapping wings with high flapping frequencies (＞30 Hz) could not be found in literature survey.In this paper,UBET that considers the movement of pressure center in pitching-moment estimation was validated using the CFD method.We investigated three three-dimensional (3D) wing kinematics that produce negative,zero,and positive aerodynamic pitching moments.For all cases,the instantaneous aerodynamic forces and pitching moments estimated via UBET and CFD showed similar trends.The differences in average vertical forces and pitching moments about the center of gravity were about 10％ and 12％,respectively.Therefore,UBET is proven to reasonably estimate the aerodynamic forces and pitching moment for flight dynamic study of FW-MAV.However,the differences in average wing drags and pitching moments about the feather axis were more than 20％.Since study of aerodynamic power requires reasonable estimation of wing drag and pitching moment about the feather axis,UBET needs further improvement for higher accuracy.