Evolution of a B2 tagged sequence from a long-range repeat family in the genus Mus

A long-range repeat family of more than 50 kb repeat size is clustered in Chromosomes (Chr) 1 of Mus musculus and M. spretus. In M. musculus this long-range repeat family shows considerable variation of copy-number frequency and contains coding regions for at least two genes. In an intron of a gene, which is part of the repeat, a B2 small interspersed repetitive element (SINE) is inserted at identical positions. The B2 element is present in all copies of the long-range repeat family; it was presumably a component of the ancestral single-copy precursor sequence that gave rise by amplification to the repeat family. Copies of the long-range repeat family vary with respect to the number of TAAA tandem repeats in the A-rich 3 end region of the B2 element. As inferred from polymerase chain reaction (PCR) data, presence and frequency of repeat number variants in the (TAAA)_n block are strain and species specific. The B2 element and its flanking regions were sequenced from two copies of the long-range repeat family. Sequence divergence between the two copies (only non-CG base substitutions and deletions/insertions) was determined to be 2.6%. Based on the drift rate in human Alu elements and a correction for the higher drift rates in rodents, and estimate for the divergence time of 1.7 million years was calculated. Since the long-range repeat family is present in M. musculus and M. spretus, it must have evolved by amplification before the separation of the two species about 1–4 million years ago.     

Repeated DNA sequences found in the large spacer of Vicia faba rDNA

In the large spacer of the rDNA of Vicia faba, multiples of a 0.32 kilobasepair (kb) sequence reiterate to various degrees. We sequenced the repetitious region consisting of the repeating sequences and its flanking regions using two cloned plasmids, which contain V. faba rDNA segments encompassing the whole region of the large spacer. The repetitious region was found to consist of multiple complete copies and one truncated copy of a 325 bp repeat unit and to be flanked by direct repeat sequences of about 150 bp. The set of direct repeats located at either side of the repetitious region differed from each other with about 10% sequence heterogeneity. However, nucleotide sequences of the direct repeats were well conserved between the two clones examined. Southern blot hybridization indicated a widespread distribution within the whole V. faba genome of some related sequences with high homologies to the 325 bp repeat unit and to the direct repeats.     

Analysis of putative DNA amplification genes in the element AUD1 of Streptomyces lividans 66

The amplifiable AUD1 element of Streptomyces lividans 66 consists of two copies of a 4.7 kb sequence flanked by three copies of a 1 kb sequence. The DNA sequences of the three 1 kb repeats were determined. Two copies (left and middle repeats) were identical: (1009 by in length) and the right repeat was 1012 bp long and differed at 63 positions. The repeats code for open reading frames (ORFs) with typical Streptomyces codon usage, which would encode proteins of about 36 kD molecular weight. The sequences of these ORFs suggest that they specify DNA-binding proteins and potential palindromic binding sites are found adjacent to the genes. The putative amplification protein encoded by the right repeat was expressed in Escherichia coli.     

Differences in the organization and chromosomal allocation of satellite DNA between the European long tailed house miceMus domesticus andMus musculus

We compared the organization of satellite DNA (stDNA) and its chromosomal allocation inMus domesticus and inMus musculus. The two stDNAs show similar restriction fragment profiles after digestion (probed withM. domesticus stDNA) with some endonucleases of which restriction sequences are present in the 230–240 bp repetitive unit of theM. domesticus stDNA. In contrast, EcoRI digestion reveals thatM. musculus stDNA lacks most of the GAATTC restriction sites, particularly at the level of the half-monomer. The chromosome distribution of stDNA (revealed by anM. domesticus stDNA probe) shows different patterns in theM. domesticus andM. musculus karyotypes, with about 60% ofM. domesticus stDNA retained in theM. musculus genome. It is particularly noteworthy that the pericentromeric regions ofM. musculus chromosomes 1 and X are totally devoid ofM. domesticus stDNA sequences. In both groups, the differences in energy transfer between the stDNA-bound fluorochromes Hoechst 33258 and propidium iodide suggest that AT-rich repeated sequences have a much more clustered array in theM. domesticus stDNA, as if they are organized in tandem repeats longer than those ofM. musculus. Considering the data as a whole, it seems likely that the evolutionary paths of the two stDNAs diverged after the generation of the ancestral 230–240 bp stDNA repetitive unit through the amplification, in theM. domesticus genome, of a family repeat which included the EcoRI GAATTC restriction sequence.     

Interruption of a human nuclear sequence homologous to mitochondrial DNA by a member of the KpnI 1.8 kb family.

We reported that several DNA sequences homologous to mitochondrial DNA (mtDNA) are present in the human nuclear genome (Tsuzuki et al. (1983) Gene 25, 223-229). Detailed Southern blot analyses revealed that one of such sequences is interrupted by a repetitive sequence about 1.8 kb long, and that the insert is one member of the dispersed repeated DNA sequences of the KpnI 1.8 kb family. Nucleotide sequence analysis showed that the KpnI 1.8 kb DNA is flanked with imperfect 15-base pair (bp) direct repeats of mtDNA. This KpnI 1.8 kb DNA has an A-rich sequence at its 3'-end, and has a considerable homology with one of the published cDNA sequences homologous to one of the human KpnI families and also to one of the African green monkey KpnI families, KpnI-LS1. These structural features suggest that the KpnI 1.8 kb DNA is a movable element and is inserted within the mtDNA-like sequence by an RNA-mediated process.     

Analysis of the regions flanking the human insulin gene and sequence of an Alu family member.

The regions around the human insulin gene have been studied by heteroduplex, hybridization and sequence analysis. These studies indicated that there is a region of heterogeneous length located approximately 700 bp before the 5' end of the gene; and that the 19 kb of cloned DNA which includes the 1430 bp insulin gene as well as 5650 bp before and 11,500 bp after the gene is single copy sequence except for 500 bp located 6000 bp from the 3' end of the gene. This 500 bp segment contains a member of the Alu family of dispersed middle repetitive sequences as well as another less highly repeated homopolymeric segment. The sequence of this region was determined. This Alu repeat is bordered by 19 bp direct repeats and also contains an 83 bp sequence which is present twice. The regions flanking the human and rat I insulin genes were compared by heteroduplex analysis to localize homologous sequences in the flanking regions which could be involved in the regulation of insulin biosynthesis. The homology between the two genes is restricted to the region encoding preproinsulin and a short region of approximately 60 bp flanking the 5' side of the genes.     

The heterochromatin of grasshoppers from the Caledia captiva species complex. I. Sequence evolution and conservation in a highly repeated DNA family

The restriction enzyme TaqI digests 0.2% of the genomic DNA from the grasshopper Caledia captiva to a family of sequences 168 bp in length (length of consensus sequence). The sequence variation of this "Taq family" of repeat units was examined among four races from C. captiva to assay the pattern of evolution within this highly repeated DNA. The Taq-family repeats are located in C-banded heterochromatin on at least one member of each homologous pair of chromosomes; the locations range from centromeric to telomeric. Thirty-nine cloned repeats isolated from two population 1A individuals along with 11 clones from seven populations taken from three of the races demonstrated sequence variation at 72 positions. Pairwise comparisons of the cloned repeats, both within an individual and between different races, indicate that levels of intraspecific divergence, as measured by reproductive incompatibility, do not correlate with sequence divergence among the 168-bp repeats. A number of subsequences within the repeat remain unchanged among all 50 clones; the longest of these is 18 bp. That the same 18-bp subsequence is present in all clones examined is a finding that departs significantly (P less than 0.01) from what would be expected to occur at random. Two other cloned repeats, from a reproductively isolated race of C. captiva, have sequences that show 56% identity with this 18-bp conserved region. An analysis showed that the frequency of occurrence of an RsaI recognition site within the 168- bp repeat in the entire Taq family agreed with that found in the cloned sequences. These data, along with a partial sequence for the entire Taq family obtained by sequencing uncloned repeats, suggest that the consensus sequence from the cloned copies is representative of this highly repeated family and is not a biased sample resulting from the cloning procedure. The 18-bp conserved sequence is part of a 42-bp sequence that possesses dyad symmetry typical of protein-binding sites. We speculate that this may be significant in the evolution of the Taq family of sequences.      

Repetitive sequences in the genome ofAnemone blanda: Identification of tandem arrays and of dispersed repeats

A tandemly repetitive sequence family (AbS1) and a repetitive sequence (Hd) forming part of a larger dispersed element (dorf-1) ofAnemone blanda were characterised. TheAbS1 satellite sequence family is located in all 4,6-diamidino-2-phenylindole (DAPI) positive intercalary heterochromatic bands and in the DAPI positive heterochromatic terminal region of chromosome 3, while the dispersedHd homologous sequences are preferentially associated with euchromatic chromosome regions. The major component of theAbS1 satellite isAbS1-H1 with a basic repeat unit of 1640 bp; a minor fraction (AbS1-H5) consists of 320 bp units. A subsection of theAbS1-H1 repeat unit exhibits homologies to the 25S rRNA gene of flowering plants suggesting that the 1.64 kb satellite was generated by amplification of a precursor satellite and/or single copy sequence together with an rDNA fragment. The rDNA homologous region is considered to evolve at a rate similar to pseudogenes and thus the age of this satellite DNA fraction can be roughly estimated as about 27 million years.The dispersed repeated sequenceHd (about 1300 bp) is associated with the 8 kb elementdorf-1. A. blanda dorf-1 constitutes about 0.2% of the genome (3×10⁴ copies), is bounded by identical long terminal repeats, and exhibits partial homology to theLilium gypsy-type elementdell, but has yet to be confirmed as a retrotransposon. In contrast to theAbS1 satellite sequence family,Hd homologous sequences were found not only inA. apennina, the closest relative ofA. blanda, but also inA. nemorosa andA. ranunculoides indicating that a progenitor sequence ofdorf-1 was present in a common ancestor before speciation ocurred.     

Varied truncation and clustering characterize some short repeats identified in micronucleus-specific DNA of Tetrahymena thermophila

There are over 6000 internally eliminated DNA sequences (IESs) in the Tetrahymena genome that are deleted in a programmed fashion during the development of a polyploid, somatic macronucleus from a diploid germline micronucleus. Recently, based on several results, a homology and small RNA-based mechanism has been proposed for the efficient elimination of IES elements. Since the RNAi machinery is proposed to be intimately involved in silencing potentially harmful repeats such as transposons and viruses, characterization of repeats and the conditions for their developmental elimination from the somatic genome is warranted. Three short (500–600 bp) repeat families, members of which had been experimentally identified in IESs, that is, in micronucleus-specific DNA, are examined here using the Tetrahymena genome database. Members of all three families display varied degrees of truncation and are represented in macronuclear sequences. A 200 bp segment of one of the families can appear in the genome on its own, or as part of a 600 bp repeat detected experimentally, or in association with an unrelated 1 kb sequence to form a 1.2 kb repeat that is also frequently truncated. The 1 kb sequence contains a 300 bp section similar to a repeat associated with a non-long terminal repeat-like element and is often found accompanied by several more copies of this shorter repeat. These observations indicate that transposition may have had a role in the evolution of the short repeat families.     

A comparative analysis of the composition and organization of two subtelomeric repeat families in <Emphasis Type="Italic">Aegilops speltoides</Emphasis>Tausch. and related species

The structural organization and evolution of two tandemly repeated families, Spelt1 and Spelt52, located in the subtelomeric regions of Aegilops speltoides chromosomes were studied. The Spelt1 family of sequences with a monomer length of 178 bp was characterized by cloning and sequence analysis of polymerase chain reaction (PCR) products. Members of the Spelt1 family revealed sequence similarities exceeding 95\%. This conservation has remained despite divergence of species in Aegilops section Sitopsis and after independent multiple amplification events in the genome of Ae. speltoides. Sequences representing the Spelt52 family were cloned, sequenced and compared with other sequences in databases. The Spelt52 repeat family contains monomers of two types, Spelt52.1 and Spelt52.2. The two monomers share a homologous stretch of 280 bp and have two regions without sequence similarity of 96 bp and 110 bp, respectively. PCR analysis was conducted to 15 lines in Ae. speltoidesTausch., Ae. longissimaSchw.&Mushc.,Ae. sharonensisEig.,Ae. bicornis(Forssk)Jaub.&Sp., andAe. searsii Feld.&Kis. using primers to the homologous and non- homologous regions of Spelt52 family. Intraspecies and interspecies differences in the occurrence and abundance of combinations of Spelt52.1 and Spelt52.2 monomers were detected. The use of primers to telomeric and subtelomeric repeats followed by Southern hybridization, cloning, and sequence analysis demonstrated that Spelt1 and Spelt52 are localized close to each other and to telomeric repeats. The efficiency of a PCR approach for the analysis of telomeric/subtelomeric junction regions of chromosomes is discussed.     

A genome-specific repeat sequence from kiwifruit (Actinidia deliciosa var. deliciosa)

Summary Six members of a family of moderately repetitive DNA sequences from kiwifruit (Actinidia deliciosa var. deliciosa) have been cloned and characterized. The repeat family is composed of elements that have a unit length of 463 bp, are highly methylated, occur in tandem arrays of at least 50 kb in length, and constitute about 0.5% of the kiwifruit genome. Individual elements diverge in nucleotide sequence by up to 5%, which suggests that the repeat sequence is evolving rapidly. Homologous sequences were found in A. deliciosa var. chlorocarpa. The repeat sequence was not found under low stringency hybridization conditions in the diploid A. chinensis, the species most closely related to the hexaploid kiwifruit, or in eight other Actinidia species. However, homologous repeats were detected in a tetraploid species, A. chrysantha. The results provide the first molecular evidence to suggest that kiwifruit may be an allopolyploid species.     

Direct repeats surrounding the ribosomal RNA genes of Physarum polycephalum

Sequence homology was found between the external transcribed spacer and the terminal non-transcribed spacer of Physarum polycephalum rDNA. The homologous sequences were located 2kb upstream from the 19s rRNA gene and 0.3kb downstream from 26S rRNA gene, respectively, and were arranged in a direct repeat manner. Sequence analyses showed that the direct repeats consisted of two parts: one was sequences of about 130bp which showed over 90% sequence homology with each other. The other consisted mainly of many tandem repeats of a 50 to 52bp unit. The direct repeat-rRNA genes-direct repeat unit was found to be flanked by short direct repetitious sequences. Based on these findings, the significance of the direct repeat is discussed in terms of evolution of rDNA.     

Identification ofTnr3, aSuppressor-Mutator/Enhancer-like transposable element from rice

We isolated members of the retroposon family p-SINE1 in rice and found that one member contained an insertion. A 3-bp sequence at the insertion site within p-SINE1 appeared duplicated. The insertion sequence, 1536 bp in length, carried imperfect inverted repeats of about 13 bp at its termini which begin with 5′-CACTA--- -3′; these repeats are similar to those found in members of theEn/Spm transposable element family. These results indicate that the insertion sequence is a transposable element belonging to theEn/Spm family and is thus namedTnr3 (transposable element inrice no.3). In fact,Tnr3 carried long subterminal regions containing direct and inverted repeats of short DNA sequences of 15 bp, another characteristic of theEN/Spm family. The subterminal repeat sequences inTnr3 are, however, of two kinds, although they share homology with each other.Tnr3 and its relatives were present in multiple copies in rice. Considering the length ofTnr3, it cannot represent an autonomous type element, but is a non-autonomous element probably derived by deletion from an autonomous transposon.     

Size Of Gene Specific Inverted Repeat - Dependent Gene Deletion In Saccharomyces cerevisiae

We describe here an approach for rapidly producing scar-free and precise gene deletions in S. cerevisiae with high efficiency. Preparation of the disruption gene cassette in this approach was simply performed by overlap extension-PCR of an invert repeat of a partial or complete sequence of the targeted gene with URA3. Integration of the prepared disruption gene cassette to the designated position of a target gene leads to the formation of a mutagenesis cassette within the yeast genome, which consists of a URA3 gene flanked by the targeted gene and its inverted repeat between two short identical direct repeats. The inherent instability of the inverted sequences in close proximity facilitates the self-excision of the entire mutagenesis cassette deposited in the genome and promotes homologous recombination resulting in a seamless deletion via a single transformation. This rapid assembly circumvents the difficulty during preparation of disruption gene cassettes composed of two inverted repeats of the URA3, which requires the engineering of unique restriction sites for subsequent digestion and T4 DNA ligation in vitro. We further identified that the excision of the entire mutagenesis cassette flanked by two DRs in the transformed S. cerevisiae is dependent on the length of the inverted repeat of which a minimum of 800 bp is required for effective gene deletion. The deletion efficiency improves with the increase of the inverted repeat till 1.2 kb. Finally, the use of gene-specific inverted repeats of target genes enables simultaneous gene deletions. The procedure has the potential for application on other yeast strains to achieve precise and efficient removal of gene sequences.     

Ca lectin gene insertion has the structural features of a transposable element

The single gene Le1, coding for soybean seed lectin, was compared to le1, a naturally occurring mutant allele containing a 3.4 kb insertion within its coding region. Le1 is devoid of introns and produces a 1.0 kb mRNA. It codes for a signal sequence of 32 amino acids and a mature protein of 253 amino acids. With the exception of six single-base substitutions, the coding and flanking sequences in le1 are identical with those in the uninterrupted gene. The insertion termini are imperfect inverted repeats flanked by a 3 bp duplication of lectin target DNA. Inverted repeats within the lectin gene are located symmetrically with respect to the insertion site and are homologous to a region of the insertion termini. These molecular traits conform with the structural aspects of transposable elements in other organisms and imply some degree of site specificity.