Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.     

Characterization of Paenibacillus curdlanolyticus Intracellular Xylanase Xyn10B Encoded by the xyn10B Gene

The Paenibacillus curdlanolyticus xyn10B gene encoding a family-10 xylanase was cloned and expressed in Escherichia coli, and the recombinant enzyme rXyn10B was characterized. Immunological analysis suggested that Xyn10B is an intracellular enzyme. rXyn10B hydrolyzed birch-wood xylan and xylooligosaccharides to produce mainly xylobiose, suggesting that it is an endoxylanase. Its properties were significantly different from those of some homologous enzymes.     

Characterization of a thermostable xylanase from an alkaliphilic Bacillus sp.

A xylanase gene (xyn10) from alkaliphilic Bacillus sp. N16-5 was cloned and expressed in Pichia pastoris. The deduced amino acid sequence has 85% identity with xylanase xyn10A from B. halodurans and contains two potential N-glycosylation sites. The glycosylated Xyn10 with MW 48 kDa can hydrolyze birchwood and oatspelt xylan. The enzyme had optimum activity at pH 7 and 70°C, with the specific activity of 92.5U/mg. The Xyn10 retained over 90% residual activity at 60°C for 30 min but lost all activity at 80°C over 15 min. Most tested ions showed no or slight inhibition effects on enzyme activity.     

Cloning,Sequencing, and Expression of the Gene Encoding a Cell-bound Multi-domain Xylanase from Clostridium josui,and Characterization of the Translated Product

The nucleotide sequence of the Clostridium josui FERM P-9684 xyn10A gene, encoding a xylanase Xyn10A, consists of 3,150 bp and encodes 1,050 amino acids with a molecular weight of 115,564. Xyn10A is a multidomain enzyme composed of an N-terminal signal peptide and six domains in the following order: two thermostabilizing domains, a family 10 xylanase domain, a family 9 carbohydrate-binding module (CBM), and two S-layer homologous (SLH) domains. Immunological analysis indicated the presence of Xyn10A in the culture supernatant of C. josui FERM P-9684 and on the cell surface. The full-length Xyn10A expressed in a recombinant Escherichia coli strain bound to ball-milled cellulose (BMC) and the cell wall fragments of C. josui, indicating that both the CBM and the SLH domains are fully functional in the recombinant enzyme. An 85-kDa xylanase species derived from Xyn10A by partial proteolysis at the C-terminal side, most likely at the internal region of the CBM, retained the ability to bind to BMC. This observation suggests that the catalytic domain or the thermostabilizing domains are responsible for binding of the enzyme to BMC. Xyn10A-II, the 100-kDa derivative of Xyn10A, was purified from the recombinant E. coli strain and characterized. The enzyme was highly active toward xylan but not toward p-nitrophenyl-β-D-xylopyranoside, p-nitrophenyl-β-D-cellobioside, or carboxymethylcellulose.     

Production in <Emphasis Type="Italic">Trichoderma reesei</Emphasis> of three xylanases from <Emphasis Type="Italic">Chaetomium thermophilum</Emphasis>: a recombinant thermoxylanase for biobleaching of kraft pulp

Three endoxylanase genes were cloned from the thermophilic fungus Chaetomium thermophilum CBS 730.95. All genes contained the typical consensus sequence of family 11 glycoside hydrolases. Genomic copies of Ct xyn11A, Ct xyn11B, and Ct xyn11C were expressed in the filamentous fungus T. reesei under the control of the strong T. reesei cel7A (cellobiohydrolase 1, cbh1) promoter. The molecular masses of the Ct Xyn11A, Ct Xyn11B, and Ct Xyn11C proteins on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were 27, 23, and 22 kDa, respectively. Ct Xyn11A was produced almost as efficiently as the homologous xylanase II from a corresponding single-copy transformant strain. Ct Xyn11B production level was approximately half of that of Ct Xyn11A. The amount of Ct Xyn11C was remarkably lower. Ct Xyn11A had the highest temperature optimum and stability of the recombinant xylanases and the highest activity at acid-neutral pH (pH 5–7). It was the most suitable for industrial bleaching of kraft pulp at high temperature.     

Fusion of the OsmC domain from esterase EstO confers thermolability to the cold-active xylanase Xyn8 from <Emphasis Type="Italic">Pseudoalteromonas arctica</Emphasis>

The OsmC-region (osmotically induced protein family) of the two-domain esterase EstO from the psychrotolerant bacterium Pseudoalteromonas arctica has been shown to increase thermolability. In an attempt to test if these properties can be conferred to another enzyme, we genetically fused osmC to the 3′-region of the family 8 xylanase encoding gene xyn8 from P. arctica. The chimeric open reading frame xyn8-OsmC was cloned and the chimeric protein was purified after heterologous expression in Escherichia coli. Xyn8 and Xyn8-OsmC showed cold-adapted properties (more than 60% activity at 0°C) using birchwood xylan as the preferred substrate. Maximal catalytic activity is slightly shifted from 15°C (Xyn8) to 20°C for Xyn8-OsmC. Thermostability of Xyn8-OsmC is significantly changed in comparison to wild-type Xyn8. The OsmC-fusion variant showed an apparent decrease in thermostability between 40 and 45°C, while both proteins are highly instable at 50°C.     

Construction ofEscherichia coli-Clostridium acetobutylicum shuttle vectors and transformation ofClostridium acetobutylicum strains

Summary SeveralE. coli-C. acetobutylicum shuttle vectors were constructed and used to transform twoC. acetobutylicum strains ATCC 824 and NCIMB 8052. Other than pSYL2, none of these vectors were able to transform ATCC 824 due to the presence of a restriction system. However, all of them could transform NCIMB 8052 with efficiencies of 8×10²–6×10³ transformants per g DNA.     

Differential induction of β-galactosidase and phospho-β-galactosidase activities in the fermentation of whey permeate by Clostridium acetobutylicum

Summary Strains of Clostridium acetobutylicum were tested for the presence of -galactosidase and phospho--galactosidase activities when grown on lactose. All strains, except C. acetobutylicum ATCC 824, showed both enzyme activities. Only phospho--galactosidase activity was detected with C. acetobutylicum ATCC 824. C. acetobutylicum strains P262 and ATCC 824 showed no detectable -galactosidase or phospho--galactosidase activities when grown on glucose. In the fermentation of whey permeate C. acetobutylicum P262 showed an early induction of phospho--galactosidase associated with the acidogenic phase. The -galactosidase activity peaked at a later stage of the fermentation (22 h) coinciding with the solvent production phase. Similar induction of phospho--galactosidase at the early stages (13 h) of fermentation of whey permeate by C. acetobutylicum ATCC 824 was also shown. No -galactosidase activity was detected during the entire course of fermentation by strain ATCC 824.     

Cloning and Characterization of the Xyn11A Gene from <Emphasis Type="Italic">Lentinula edodes</Emphasis>

Hemicellulose represents a rich source of biomass that can be converted into useful chemical feedstocks. One of the main components of hemicellulose is xylan, a polymer of xylose residues. Xylanase enzymes that hydrolyze xylan are therefore of great commercial interest. We have cloned a gene (xyn11A) that encodes a 283-amino acid xylanase enzyme from the fungus Lentinula edodes. The enzyme has a pI of 4.6 and belongs to the highly conserved glycosyl hydrolase family 11. The xylanase gene was cloned into a Pichia pastoris expression vector that secretes active enzyme into both solid and liquid media. The optimal reaction conditions were at pH 4.5 and 50°C. The enzyme had a K_m of 1.5 mg/ml and a V_max of 2.1 mmol/min/mg. Xyn11A produced primarily xylobiose, xylotriose, and xylotetraose from a birchwood xylan substrate. This is the first report on the cloning of a hemicellulase gene from L. edodes.     

Thermostable carbohydrate binding module increases the thermostability and substrate-binding capacity of Trichoderma reesei xylanase 2

To improve the thermostability of Trichoderma reesei xylanase 2 (Xyn2), the thermostabilizing domain (A2) from Thermotoga maritima XynA were engineered into the N-terminal region of the Xyn2 protein. The xyn2 and hybrid genes were successfully expressed in Pichia pastoris using the strong methanol inducible alcohol oxidase 1 (AOX1) promoter and the secretion signal sequence from S. cerevisiae (α-factor). The transformants expressed the hybrid gene produced clearly increased both the thermostability and substrate-binding capacity compared to the corresponding strains expressed the native Xyn2 gene. The activity of the hybrid enzyme was highest at 65 °C that was 10 °C higher than the native Xyn2. The hybrid enzyme was stable at 60 °C and retained more than 85% of its activity after 30-min incubation at this temperature. The hybrid enzyme was highly specific toward xylan and analysis of the products from birchwood xylan degradation confirmed that the enzyme was an endo-xylanase with xylobiose and xylotriose as the main degradation products. These attributes should make it an attractive applicant for various applications. Our results also suggested that the N-terminal domain A2 is responsible for both the thermostability and substrate-binding capacity of T. maritima XynA.     

Molecular and Biochemical Characterization of Two Xylanase-Encoding Genes from Cellulomonas pachnodae

Two xylanase-encoding genes, named xyn11A and xyn10B, were isolated from a genomic library of Cellulomonas pachnodae by expression in Escherichia coli. The deduced polypeptide, Xyn11A, consists of 335 amino acids with a calculated molecular mass of 34,383 Da. Different domains could be identified in the Xyn11A protein on the basis of homology searches. Xyn11A contains a catalytic domain belonging to family 11 glycosyl hydrolases and a C-terminal xylan binding domain, which are separated from the catalytic domain by a typical linker sequence. Binding studies with native Xyn11A and a truncated derivative of Xyn11A, lacking the putative binding domain, confirmed the function of the two domains. The second xylanase, designated Xyn10B, consists of 1,183 amino acids with a calculated molecular mass of 124,136 Da. Xyn10B also appears to be a modular protein, but typical linker sequences that separate the different domains were not identified. It comprises a N-terminal signal peptide followed by a stretch of amino acids that shows homology to thermostabilizing domains. Downstream of the latter domain, a catalytic domain specific for family 10 glycosyl hydrolases was identified. A truncated derivative of Xyn10B bound tightly to Avicel, which was in accordance with the identified cellulose binding domain at the C terminus of Xyn10B on the basis of homology. C. pachnodae, a (hemi)cellulolytic bacterium that was isolated from the hindgut of herbivorous Pachnoda marginata larvae, secretes at least two xylanases in the culture fluid. Although both Xyn11A and Xyn10B had the highest homology to xylanases from Cellulomonas fimi, distinct differences in the molecular organizations of the xylanases from the two Cellulomonas species were identified.     

Thermostable xylanases, Xyn10A and Xyn11A, from the actinomycete Nonomuraea flexuosa: isolation of the genes and characterization of recombinant Xyn11A polypeptides produced in Trichoderma reesei

Two endoxylanases, Nf Xyn11A and Nf Xyn10A, were cloned from a Nonomuraea flexuosa (previously Actinomadura flexuosa) DSM43186 genomic expression library in Escherichia coli. The coding sequences of xyn11A and xyn10A consist of 344 and 492 amino acids, respectively. The catalytic domains belong to family 11 and family 10 of glycoside hydrolases. The C-termini share strong amino acid sequence similarity to carbohydrate-binding module (CBM) families CBM2 and CBM13, respectively. Native Nf Xyn11A, and recombinant Xyn11A expressed in the filamentous fungus Trichoderma reesei, were purified from cultivation media and characterized. The molecular masses of the full-length enzymes determined by mass spectrometry were 32.9 kDa and 33.4 kDa, the recombinant enzyme having higher molecular mass due to glycosylation. In addition, shorter polypeptides with molecular masses of 23.8 kDa and 22.0 kDa were characterized from the T. reesei culture medium, both lacking the C-terminal CBM and the 22.0 kDa polypeptide also lacking most of the linker region. The recombinant polypeptides were similar to each other in terms of specific activity, pH and temperature dependence. However, the 23.8 kDa and 22.0 kDa polypeptides were more thermostable at 80°C than the full-length enzyme. All polypeptide forms were effective in pretreatment of softwood kraft pulp at 80°C.     

A novel trifunctional,family GH10 enzyme from Acidothermus cellulolyticus 11B,exhibiting endo-xylanase,arabinofuranosidase and acetyl xylan esterase activities

A novel, family GH10 enzyme, Xyn10B from Acidothermus cellulolyticus 11B was cloned and expressed in Escherichia coli. This enzyme was purified to homogeneity by binding to regenerated amorphous cellulose. It had higher binding on Avicel as compared to insoluble xylan due to the presence of cellulose-binding domains, CBM3 and CBM2. This enzyme was optimally active at 70 °C and pH 6.0. It was stable up to 70 °C while the CD spectroscopy analysis showed thermal unfolding at 80 °C. Xyn10B was found to be a trifunctional enzyme having endo-xylanase, arabinofuranosidase and acetyl xylan esterase activities. Its activities against beechwood xylan, p-Nitrophenyl arabinofuranoside and p-Nitrophenyl acetate were found to be 126,480, 10,350 and 17,250 U μmol⁻¹, respectively. Xyn10B was highly active producing xylobiose and xylose as the major end products, as well as debranching the substrates by removing arabinose and acetyl side chains. Due to its specific characteristics, this enzyme seems to be of importance for industrial applications such as pretreatment of poultry cereals, bio-bleaching of wood pulp and degradation of plant biomass.

     

Characterization of Xyn10A, a highly active xylanase from the human gut bacterium Bacteroides xylanisolvens XB1A

A xylanase gene xyn10A was isolated from the human gut bacterium Bacteroides xylanisolvens XB1A and the gene product was characterized. Xyn10A is a 40-kDa xylanase composed of a glycoside hydrolase family 10 catalytic domain with a signal peptide. A recombinant His-tagged Xyn10A was produced in Escherichia coli and purified. It was active on oat spelt and birchwood xylans and on wheat arabinoxylans. It cleaved xylotetraose, xylopentaose, and xylohexaose but not xylobiose, clearly indicating that Xyn10A is a xylanase. Surprisingly, it showed a low activity against carboxymethylcellulose but no activity at all against aryl-cellobioside and cellooligosaccharides. The enzyme exhibited K _m and V _max of 1.6 mg ml⁻¹ and 118 μmol min⁻¹ mg⁻¹ on oat spelt xylan, and its optimal temperature and pH for activity were 37°C and pH 6.0, respectively. Its catalytic properties (k _cat/K _m = 3,300 ml mg⁻¹ min⁻¹) suggested that Xyn10A is one of the most active GH10 xylanase described to date. Phylogenetic analyses showed that Xyn10A was closely related to other GH10 xylanases from human Bacteroides. The xyn10A gene was expressed in B. xylanisolvens XB1A cultured with glucose, xylose or xylans, and the protein was associated with the cells. Xyn10A is the first family 10 xylanase characterized from B. xylanisolvens XB1A.     

Direct cloning of genes encoding novel xylanases from the human gut

The aim of this study was to identify a novel 1,4-beta-xylanase gene from the mixed genome DNA of human fecal bacteria without bacterial cultivation. Total DNA was isolated from a population of bacteria extracted from fecal microbiota. Using PCR, the gene fragments encoding 5 different family 10 xylanases (xyn10A, xyn10B, xyn10C, xyn10D, and xyn10E) were found. Amino acid sequences deduced from these genes were highly homologous with those of xylanases from anaerobic intestinal bacteria such as Bacteroides spp. and Prevotella spp. Self-organizing map (SOM) analysis revealed that xynA10 was classified into Bacteroidetes. To confirm that one of these genes encodes an active enzyme, a full-length xyn10A gene was obtained using nested primers specific to the internal fragments and random primers. The xyn10A gene encoding the xylanase Xyn10A consists of 1146 bp and encodes a protein of 382 amino acids and a molecular weight of 43,552. Xyn10A was a single module novel xylanase. Xyn10A was purified from a recombinant Escherichia coli strain and characterized. This enzyme was optimally active at 40 degrees C and stable up to 50 degrees C at pH 6.5 and over the pH range 4.0-11.0 at 25 degrees C. In addition, 2 ORFs (ORF1 and ORF2) were identified upstream of xyn10A. These results suggested that many unidentified xylanolytic bacteria exist in the human gut and may contribute to the breakdown of xylan which contains dietary fiber.     

Improvement of xylose utilization in Clostridium acetobutylicum via expression of the talA gene encoding transaldolase from Escherichia coli

Clostridium acetobutylicum ATCC 824 was metabolically engineered for improved xylose utilization. The gene talA, which encodes transaldolase from Escherichia coli K-12, was cloned and overexpressed in C. acetobutylicum ATCC 824. Compared with C. acetobutylicum ATCC 824 (824-WT), the transformant bearing the E. coli talA gene (824-TAL) showed improved ability on xylose utilization and solvents production using xylose as the sole carbon source. During the fermentation of xylose and glucose mixtures with three xylose/glucose ratios (approximately 1:2, 1:1 and 2:1), the rate of xylose consumption and final solvents titers of 824-TAL were all higher than those of 824-WT, despite glucose repression on xylose uptake still existing. These results suggest that the insufficiency of transaldolase in the pentose phosphate pathway (PPP) of C. acetobutylicum is one of the bottlenecks for xylose metabolism and therefore, overexpressing the gene encoding transaldolase is able to improve xylose utilization and solvent production.