Stabilization of enzyme immobilized in temperature-sensitive hydrogels

-Galactosidase was immobilized in a crosslinked poly(N-isopropylacrylamide-co-acrylamide) hydrogel which exhibits an LCST(lower critical solution temperature) behavior. The hydrogel collapses above the LCST, and expands below the LCST. The temperature-dependent phase transition was around 37 °C. The stability of immobilized enzyme was investigated at different temperatures which allow different degrees of collapse in the hydrogel matrix. It was hypothesized that the immobilzed enzyme is more stable in the collapsed matrix due to the physical restraint imposed on the enzyme entrapped.     

Drug loading into and drug release from pH- and temperature-responsive cylindrical hydrogels

Hydrogels that undergo deformation upon appropriate changes in pH or temperature have considerable promise as drug delivery vehicles. Drug uptake in swelling and nonswelling cylindrical hydrogels and drug release from these into a target fluid are investigated here. A mathematical model for hydrogel-solution composite, a composite of a distributed parameter system (cylindrical hydrogel) and a lumped parameter system (surrounding solution), is developed. The polymer network displacement in a swelling/deswelling hydrogel is described by a stress diffusion coupling model. The analytical solution for network displacement is used to predict solvent intake by swelling hydrogels, solvent efflux from deswelling hydrogels, and changes in pressure, porosity, and effective drug diffusivity. These in turn influence drug uptake during and after hydrogel swelling and drug release from hydrogel during and after deswelling. Numerical results illustrate benefits of hydrogel swelling for drug loading and merits of different modes of drug release. Drug uptake and drug release by temperature-responsive hydrogels are compared with those by hydrogels not subject to deformation.     

Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose

A novel biodegradable sodium carboxymethyl cellulose (NaCMC)-based hydrogel was synthesized by using fumaric acid (FA) as a crosslinking agent at various ratios. Hydrogels (CMCF) were characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Swelling behaviors of hydrogels were investigated in distilled water, various salt, and pH solutions. The FTIR results indicated the crosslinking between carboxyl groups of FA with hydroxyl group of NaCMC through ester formation. AFM analyses showed that roughness of hydrogel surface decreased with increasing crosslinker concentration. The swelling capacity decreased with an increase in charge of the metal cation (Al(3+)相似文献   

Supramolecular hydrogels formed from biodegradable ternary COS-g-PCL-b-MPEG copolymer with α-cyclodextrin and their drug release

On the basis of the synthesis of novel biodegradable amphiphilic MPEG-b-PCL-grafted chitooligosaccharide (COS-g-PCL-b-MPEG) copolymers, supramolecular hydrogels were fabricated rapidly via their inclusion complexation with α-cyclodextrin (α-CD) in aqueous solutions. The graft copolymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography (GPC), and fluorescence measurement, and the supramolecular structure of the resultant hydrogels was confirmed by X-ray diffraction measurements. Rheological studies of as-obtained hydrogels indicate that the physical properties could be modulated by controlling the concentration and the graft content of the graft copolymers as well as the molar feed ratio of the graft to α-CD. The in vitro release kinetics studies of bovine serum albumin (BSA) entrapped in the hydrogels show that the drug release profiles are dependent on the supramolecular hydrogel compositions.     

Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers

A biodegradable block copolymer (PCL-b-PLLA, M(n) = 1.72 x 10(4), M(w)/M(n) = 1.37) of poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA) with very low crystallinity was obtained by forming the inclusion complex between alpha-cyclodextrin molecules and PCL-b-PLLA followed by coalescence of the guest polymer chains. Films of the as-synthesized and coalesced copolymer samples, PCL and PLLA homopolymers of approximately the same chain lengths as the corresponding blocks of PCL-b-PLLA, and a physical blend of PCL/PLLA homopolymers with the same molar composition as PCL-b-PLLA were prepared by melt-compression molding between Teflon plates. Subsequently, the in vitro biodegradation behavior of these films was studied in phosphate buffer solution containing lipase from Rhizopus arrhizus, by means of ultraviolet spectra, attenuated total reflectance FTIR spectra, differential scanning calorimetry, wide-angle X-ray diffraction measurements, and weight loss analysis. PCL segments were found to degrade much faster than PLLA segments, both in the pure state and in copolymer or blend samples. Consistent with our expectation, suppression of the phase separation, as well as a decrease of crystallinity, in the coalesced copolymer sample led to a much faster enzymatic degradation than that of either as-synthesized copolymer or the PCL/PLLA physical blend sample, especially during the early stages of biodegradation. Thus the biodegradation behavior of biodegradable block copolymers, which is of decisive importance in drug delivery and controlled release systems, may be regulated by the novel and convenient means recently reported by us.(1)     

Synthesis and characterization of biodegradable cationic poly(propylene fumarate-co-ethylene glycol) copolymer hydrogels modified with agmatine for enhanced cell adhesion

We synthesized positively charged biodegradable hydrogels by cross-linking of agmatine-modified poly(ethylene glycol)-tethered fumarate (Agm-PEGF) and poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)) to investigate the effect of the guanidino groups of the agmatine on hydrogel swelling behavior and smooth muscle cell adhesion to the hydrogels. The weight swelling ratio of these hydrogels at pH 7.0 increased from 279 +/- 4 to 306 +/- 7% as the initial Agm-PEGF content increased from 0 to 200 mg/g of P(PF-co-EG), respectively. The diffusional exponents, n, during the initial phase of water uptake were independent of the initial Agm-PEGF content and were determined to be 0.66 +/- 0.08, 0.71 +/- 0.07, and 0.60 +/- 0.05 for respective initial Agm-PEGF contents of 0, 100, and 200 mg/g. The heat of fusion of water present in the hydrogels increased from 214 +/- 11 to 254 +/- 4 J/g as the initial Agm-PEGF content increased from 0 to 200 mg/g. The number of adherent smooth muscle cells increased dose-dependently from 15 +/- 6 to 75 +/- 7% of the initial seeding density as the initial Agm-PEGF content increased from 0 to 200 mg/g. These results suggest that the incorporation of the guanidino groups of agmatine into P(PF-co-EG) hydrogels increases the hydrogel free water content and the total water content of the hydrogels and also enhances cell adhesion to the hydrogels.     

Photocrosslinkable biodegradable responsive hydrogels as drug delivery systems

Recently, controlled release from biocompatible materials has received much attention for biomedical applications. Due to their biocompatibility and biodegradability, glucopyranosides such as dextran appear as promising polymeric materials if one is able to regulate their rheological properties and the encapsulation/release efficiency. In this work graft polymer hydrogels from dextran and N-isopropylacrylamide (NIPAAm) were prepared and characterized.Dextran molecules were modified with 2-isocyanatoethylmethacrylate (IEMA) in order to obtain a polymer with carbon double bonds. Urethane linkages resulted from the reaction between hydroxyl groups (OH) of the dextran and isocyanate groups (NCO) of the IEMA. The obtained polymer was then crosslinked by UV irradiation in the presence of the photoinitiating agent Irgacure 2959 by CIBA^®. The drug Ondansetron^® was entrapped in the final system and its release profile was determined at 25 and 37 °C.The characterization of the materials was accomplished by: ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy, elemental analysis, lower critical solution temperature (LCST) determination, swelling behaviour evaluation, determination of surface energy by contact angle measurement and drug delivery profile studies.     

Shortening the biosensor assay by use of enzyme-containing temperature-sensitive hydrogels

To shorten the biosensor assay time, a new technique, based on the increasing of mass transfer rate between the enzyme-containing membrane and the bulk solution as a result of phase transition of stimuli-sensitive matrix (swelling-shrinkage processes) under the action of an outer signal, is proposed. For a model system – glucose oxidase immobilized into thermosensitive poly-N-isopropylacrylamide gel – the total time of the assay procedure can be halved.     

In-situ formation of biodegradable hydrogels by stereocomplexation of PEG-(PLLA)8 and PEG-(PDLA)8 star block copolymers

Eight-arm poly(ethylene glycol)-poly(L-lactide), PEG-(PLLA)(8), and poly(ethylene glycol)-poly(D-lactide), PEG-(PDLA)(8), star block copolymers were synthesized by ring-opening polymerization of either L-lactide or D-lactide at room temperature in the presence of a single-site ethylzinc complex and 8-arm PEG (M(n) = 21.8 x 10(3) or 43.5 x 10(3)) as a catalyst and initiator, respectively. High lactide conversions (>95%) and well-defined copolymers with PLLA or PDLA blocks of the desired molecular weights were obtained. Star block copolymers were water-soluble when the number of lactyl units per poly(lactide) (PLA) block did not exceed 14 and 17 for PEG21800-(PLA)(8) and PEG43500-(PLA)(8), respectively. PEG-(PLA)(8) stereocomplexed hydrogels were prepared by mixing aqueous solutions with equimolar amounts of PEG-(PLLA)(8) and PEG-(PDLA)(8) in a polymer concentration range of 5-25 w/v % for PEG21800-(PLA)(8) star block copolymers and of 6-8 w/v % for PEG43500-(PLA)(8) star block copolymers. The gelation is driven by stereocomplexation of the PLLA and PDLA blocks, as confirmed by wide-angle X-ray scattering experiments. The stereocomplexed hydrogels were stable in a range from 10 to 70 degrees C, depending on their aqueous concentration and the PLA block length. Stereocomplexed hydrogels at 10 w/v % polymer concentration showed larger hydrophilic and hydrophobic domains as compared to 10 w/v % single enantiomer solutions, as determined by cryo-TEM. Correspondingly, dynamic light scattering showed that 1 w/v % solutions containing both PEG-(PLLA)(8) and PEG-(PDLA)(8) have larger "micelles" as compared to 1 w/v % single enantiomer solutions. With increasing polymer concentration and PLLA and PDLA block length, the storage modulus of the stereocomplexed hydrogels increases and the gelation time decreases. Stereocomplexed hydrogels with high storage moduli (up to 14 kPa) could be obtained at 37 degrees C in PBS. These stereocomplexed hydrogels are promising for use in biomedical applications, including drug delivery and tissue engineering, because they are biodegradable and the in-situ formation allows for easy immobilization of drugs and cells.     

Impact of silicone-based block copolymer surfactants on the surface and bulk microscopic organization of a biodegradable polymer,poly(epsilon-caprolactone)

Two amphiphilic AB block copolymers, containing a highly compatible poly(epsilon-caprolactone) (PCL) block connected to a poly(dimethylsiloxane) (PDMS) block having a low surface energy, are synthesized and characterized in terms of their dispersion in a presynthesized PCL matrix. X-ray photoelectron spectroscopy, contact angle measurements, atomic force microscopy, and optical microscopy are used to describe the evolution of the surface chemical composition, as well as the surface and bulk morphology of the PCL/copolymer blends as a function of the nature and weight surface free energy and the dispersion of the copolymers in the blends, leading to important modifications of the bulk and the surface morphology. These differences are interpreted in terms of the impact of the block copolymers on the semicrystalline polymer structure and related properties in the prospect of using the surfactants to improve the synthesis of PCL in supercritical CO(2).     

Use of protein-acrylamide copolymer hydrogels for measuring protein concentration and activity

We report the development and characterization of a polyacrylamide-based protein immobilization strategy for surface-bound protein assays, including concentration detection, binding affinity, and enzyme kinetics. Glutathione S-transferase (GST) fusion proteins have been labeled with an acrylic moiety and attached to acrylic-functionalized glass surfaces through copolymerization with acrylic monomer. The specific attachment of GST-green fluorescent protein (GFP) fusion protein was more than sevenfold greater than the nonspecific attachment of nonacrylic-labeled GST-GFP; 0.32 ng/mm(2) of surface-attached GST-GFP was detectable by direct measurement of GFP fluorescence and this lower detection limit was reduced to 0.080 ng/mm(2) using indirect antibody-based detection. The polyacrylamide-based surface attachment strategy was also used to measure the kinetics of substrate phosphorylation by the kinase c-Src. Michaelis-Menten kinetic constants for the reaction occurring in solution were K(m) = 2.7 +/- 1.0 microM and V(max) = 8.1 +/- 3.1 (arbitrary units). Kinetic values for the reaction utilizing surface-immobilized substrate were K(m) = 0.36 +/- 0.033 microM and V(max) = 9.7 +/- 0.63 and were found to be independent of the acrylamide concentration within the copolymer. Such a surface attachment strategy should be applicable to the proteomics field and addresses denaturation and dehydration problems associated with protein microarray development.     

Photocrosslinked hyaluronic acid hydrogels: natural,biodegradable tissue engineering scaffolds

Ideally, rationally designed tissue engineering scaffolds promote natural wound healing and regeneration. Therefore, we sought to synthesize a biomimetic hydrogel specifically designed to promote tissue repair and chose hyaluronic acid (HA; also called hyaluronan) as our initial material. Hyaluronic acid is a naturally occurring polymer associated with various cellular processes involved in wound healing, such as angiogenesis. Hyaluronic acid also presents unique advantages: it is easy to produce and modify, hydrophilic and nonadhesive, and naturally biodegradable. We prepared a range of glycidyl methacrylate-HA (GMHA) conjugates, which were subsequently photopolymerized to form crosslinked GMHA hydrogels. A range of hydrogel degradation rates was achieved as well as a corresponding, modest range of material properties (e.g., swelling, mesh size). Increased amounts of conjugated methacrylate groups corresponded with increased crosslink densities and decreased degradation rates and yet had an insignificant effect on human aortic endothelial cell cytocompatibility and proliferation. Rat subcutaneous implants of the GMHA hydrogels showed good biocompatibility, little inflammatory response, and similar levels of vascularization at the implant edge compared with those of fibrin positive controls. Therefore, these novel GMHA hydrogels are suitable for modification with adhesive peptide sequences (e.g., RGD) and use in a variety of wound-healing applications.     

Biocompatible wound dressings based on chemically degradable triblock copolymer hydrogels

The synthesis of a series of thermo-responsive ABA triblock copolymers in which the outer A blocks comprise poly(2-hydroxypropyl methacrylate) and the central B block is poly(2-(methacryloyloxy)ethyl phosphorylcholine) is achieved using atom transfer radical polymerization. These novel triblock copolymers form thermo-reversible physical gels with critical gelation temperatures and mechanical properties that are highly dependent on the copolymer composition and concentration. TEM studies on dried dilute copolymer solutions indicate the presence of colloidal aggregates, which is consistent with micellar gel structures. This hypothesis is consistent with the observation that incorporating a central disulfide bond within the B block leads to thermo-responsive gels that can be efficiently degraded using mild reductants such as dithiothreitol (DTT) over time scales of minutes at 37 degrees C. Moreover, the rate of gel dissolution increases at higher DTT/disulfide molar ratios. Finally, these copolymer gels are shown to be highly biocompatible. Only a modest reduction in proliferation was observed for monolayers of primary human dermal fibroblasts, with no evidence for cytotoxicity. Moreover, when placed directly on 3D tissue-engineered skin, these gels had no significant effect on cell viability. Thus, we suggest that these thermo-responsive biodegradable copolymer gels may have potential applications as wound dressings.     

Synthesis and characterization of a new polysaccharide-graft-polymethacrylate copolymer for three-dimensional hybrid hydrogels

Hybrid materials constituted by hydrophobic and hydrophilic biocompatible macromolecules are useful for biomedical applications. In this context, a well-known acrylic monomer (methyl methacrylate) was polymerized and grafted onto the polysaccharide dextran by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. The effects of concentrations of dextran, acrylic monomer, and ceric ions on the copolymerization yields were investigated in detail. The obtained polymers were studied by solubility measurements, Fourier transform infrared spectrometry, (13)C nuclear magnetic resonance spectroscopy, and viscosimetric analysis. Interestingly, we found conditions to form transparent and homogeneous thin films or 3D structures with hybrid properties. Indeed, the copolymer, but not dextran or PMMA, could be dissolved in water/THF (20/80 v/v). The thermomechanical properties of the resulting copolymer analyzed by differential scanning calorimetry and dynamic mechanical analysis showed the occurrence of a single glass-transition temperature and a marked difference with the two homopolymers. The cytocompatibility of the copolymer with human endothelial cells was evidenced by the normal cell adhesion, proliferation, and morphology after 5 days in culture on these gels. In conclusion, this type of copolymer with hybrid properties of two biocompatible macromolecules could be of great interest as a 3D scaffold or for coating in biomedical applications.     

Novel injectable pH and temperature sensitive block copolymer hydrogel

A novel pH and temperature sensitive block copolymer was prepared by adding pH sensitive moiety to temperature sensitive block copolymer. This block copolymer solution showed a reversible sol-gel transition by a small pH change in the range of pH 7.4-8.0 and also by the temperature change in the region of body temperature. The very precise molecular weight control of block copolymer and the prudential tuning of hydrophilic-hydrophobic balance were needed to control the phase diagram. This block copolymer solution forms a gel at 37 degrees C, pH 7.4 (human body). When the block copolymer solution is at room temperature and pH 8.0 as a sol state, both the temperature and pH change are needed for the gelation. This material can be employed as injectable carriers for hydrophobic drugs and proteins, etc. Gelation inside the needle can be prevented by an increase in the temperature during injection, because it does not change into the gel form with only increasing temperature. This material can be used for even a long guide catheter into the body. The block copolymer hydrogel which shows the sol-gel transition by the small pH change from pH 8.0 to pH 7.4 has merits in the delivery system for protein and cells which show cytotoxicity in acidic (below pH 6.5) or basic (above pH 8.5) conditions. This block copolymer system could be used as a template technology for injectable delivery systems.     

Rheological characterization of polysaccharide-poly(ethylene glycol) star copolymer hydrogels

Binding interactions between low molecular weight heparin (LMWH) and heparin-binding peptides (HBP) have been applied as a strategy for the assembly of hydrogels that are capable of sequestering growth factors and delivering them in a controlled manner. In this work, the assembly of four-arm star poly(ethylene glycol) (PEG)-LMWH conjugate with PEG-HBP conjugates has been investigated. The interactions between LMWH and the heparin-binding regions of antithrombin III (ATIII) or the heparin interacting protein (HIP) have been characterized via heparin affinity chromatography and surface plasmon resonance (SPR); results indicate that the two peptides have slightly different affinities for heparin and LMWH, and bind LMWH with micromolar affinity. Solutions of the PEG-LMWH and of mixtures of the PEG-LMWH and PEG-HBP were characterized via both bulk rheology and laser tweezer microrheology. Interestingly, solutions of PEG-LMWH (2.5 wt % in PBS) form hydrogels in the absence of PEG-ATIII or PEG-HIP, with storage moduli, determined via bulk rheological measurements, in excess of the loss moduli over frequencies of 0.1-100 Hz. The addition of PEG-ATIII or PEG-HIP increases the moduli in direct proportion to the number of cross-links introduced. Characterization of the hydrogels via microrheology shows the gel microstructure is composed of polymer-rich fibrillar structures surrounded by polymer-depleted buffer. Potential applications of these hydrogels are discussed.     

Reversible hydrogels from self-assembling genetically engineered protein block copolymers

A series of triblock protein copolymers composed of a central water-soluble polyelectrolyte segment flanked by two coiled-coil domains was synthesized by genetic engineering methods. The copolymers self-assembled into reversible hydrogels in response to changes in temperature, pH, and the presence or absence of denaturating agent (guanidine hydrochloride, GdnHCl). Hydrogel formation was concentration-dependent, and the concentration needed for hydrogel formation correlated with the oligomerization state of the coiled-coil domains in the protein copolymers. The morphology of the hydrogels, as determined by scanning electron microscopy (SEM), indicated the presence of porous interconnected networks. The thermal stabilities and self-assembling properties of the protein copolymers were successfully controlled by manipulating the amino acid sequences of the coiled-coil domains. The stimuli responsiveness and reversibility of the hydrogel self-assembly suggest that these protein copolymers may have potential in biomedical applications.