Lateral pressure profiles in cholesterol–DPPC bilayers

By means of atomistic molecular dynamics simulations, we study cholesterol–DPPC (dipalmitoyl phosphatidylcholine) bilayers of different composition, from pure DPPC bilayers to a 1:1 mixture of DPPC and cholesterol. The lateral pressure profiles through the bilayers are computed and separated into contributions from the different components. We find that the pressure inside the bilayer changes qualitatively for cholesterol concentrations of about 20% or higher. The pressure profile in the inside of the bilayer then turns from a rather flat shape into an alternating sequence of regions with large positive and negative lateral pressure. The changes in the lateral pressure profile are so characteristic that specific interaction between cholesterol and molecules such as membrane proteins mediated solely via the lateral pressure profile might become possible.     

Lipid composition and the lateral pressure profile in bilayers

The mechanisms by which variations in the lipid composition of cell membranes influence the function of membrane proteins are not yet well understood. In recent work, a nonlocal thermodynamic mechanism was suggested in which changes in lipid composition cause a redistribution of lateral pressures that in turn modulates protein conformational (or aggregation) equilibria. In the present study, results of statistical thermodynamic calculations of the equilibrium pressure profile and bilayer thickness are reported for a range of lipids and lipid mixtures. Large redistributions of lateral pressure are predicted to accompany variation in chain length, degree and position of chain unsaturation, head group repulsion, and incorporation of cholesterol and interfacially active solutes. Combinations of compositional changes are found that compensate with respect to bilayer thickness, thus eliminating effects of hydrophobic mismatch, while still effecting significant shifts of the pressure profile. It is also predicted that the effect on the pressure profile of addition of short alkanols can be reproduced with certain unnatural lipids. These results suggest possible roles of cholesterol, highly unsaturated fatty acids and small solutes in modulating membrane protein function and suggest unambiguous experimental tests of the pressure profile hypothesis. As a test of the methodology, calculated molecular areas and area elastic moduli are compared with experimental and simulation results.     

Computational investigation of pressure profiles in lipid bilayers with embedded proteins

The distribution of surface tension within a lipid bilayer, also referred to as the lateral pressure profile, has been the subject of theoretical scrutiny recently due to its potential to radically alter the function of biomedically important membrane proteins. Experimental measurements of the pressure profile are still hard to come by, leaving first-principles all-atom calculations of the profile as an important investigative tool. We describe and validate an efficient implementation of pressure profile calculations in the molecular dynamics package NAMD, capable of distinguishing between internal, bonded and nonbonded contributions as well as those of selected atom groups. The new implementation can also be used in conjunction with Ewald summation for long-range electrostatics, improving the accuracy and reproducibility of the calculated profiles. We then describe results of the calculation of a pressure profile for a simple protein–lipid system consisting of melittin embedded in a DMPC bilayer. While the lateral pressure in the protein–lipid system is nearly the same as that of the bilayer alone, partitioning of the lateral pressure by atom type revealed substantial perturbation of the pressure profile and surface tension in an asymmetric manner.     

Transmembrane Peptides Influence the Affinity of Sterols for Phospholipid Bilayers

Cholesterol is distributed unevenly between different cellular membrane compartments, and the cholesterol content increases from the inner bilayers toward the plasma membrane. It has been suggested that this cholesterol gradient is important in the sorting of transmembrane proteins. Cholesterol has also been to shown play an important role in lateral organization of eukaryotic cell membranes. In this study the aim was to determine how transmembrane proteins influence the lateral distribution of cholesterol in phospholipid bilayers. Insight into this can be obtained by studying how cholesterol interacts with bilayer membranes of different composition in the presence of designed peptides that mimic the transmembrane helices of proteins. For this purpose we developed an assay in which the partitioning of the fluorescent cholesterol analog CTL between LUVs and mβCD can be measured. Comparison of how cholesterol and CTL partitioning between mβCD and phospholipid bilayers with different composition suggests that CTL sensed changes in bilayer composition similarly as cholesterol. Therefore, the results obtained with CTL can be used to understand cholesterol distribution in lipid bilayers. The effect of WALP23 on CTL partitioning between DMPC bilayers and mβCD was measured. From the results it was clear that WALP23 increased both the order in the bilayers (as seen from CTL and DPH anisotropy) and the affinity of the sterol for the bilayer in a concentration dependent way. Although WALP23 also increased the order in DLPC and POPC bilayers the effects on CTL partitioning was much smaller with these lipids. This indicates that proteins have the largest effect on sterol interactions with phospholipids that have longer and saturated acyl chains. KALP23 did not significantly affect the acyl chain order in the phospholipid bilayers, and inclusion of KALP23 into DMPC bilayers slightly decreased CTL partitioning into the bilayer. This shows that transmembrane proteins can both decrease and increase the affinity of sterols for the lipid bilayers surrounding proteins. This is likely to affect the sterol distribution within the bilayer and thereby the lateral organization in biomembranes.     

The influence of membrane lateral pressures on simple geometric models of protein conformational equilibria

The function of many intrinsic membrane proteins requires a conformational transition that is often strongly influenced by the molecular composition of the bilayer in which the protein is embedded. Recently, a mechanism for this shift in conformational equilibrium was suggested, in which it is argued that a shift in distribution of lateral pressures of the bilayer resulting from a change in lipid composition alters the amount of mechanical work of the protein conformational transition, if the change in the cross-sectional area profile of the protein varies with depth within the bilayer. As there is little information on the change in shape of the transmembrane region of any protein, various simple geometric models are considered. For both a generic model, and more specific models that approximate likely cooperative rearrangements of alpha-helices in bundles, it is found that the conformational equilibrium depends on the first and second integral moments of the lateral pressure distribution. In addition to revealing the possible physical underpinnings of the well-known correlation between protein activity and the 'nonlamellar' tendency of bilayer lipids, this dependence on moments of the pressure profile allows for prediction of the relative effects of different lipid compositional changes even in the absence of information on specific protein shape changes. Effects of variation in acyl chain length, degree and position of cis-unsaturation, and addition of cholesterol and small interfacially-active solutes (n-alkanols) are compared.     

Effects of temperature and pressure on the lateral organization of model membranes with functionally reconstituted multidrug transporter LmrA

To contribute to the understanding of membrane protein function upon application of pressure, we investigated the influence of hydrostatic pressure on the conformational order and phase behavior of the multidrug transporter LmrA in biomembrane systems. To this end, the membrane protein was reconstituted into various lipid bilayer systems of different chain length, conformation, phase state and heterogeneity, including raft model mixtures as well as some natural lipid extracts. In the first step, we determined the temperature stability of the protein itself and verified its reconstitution into the lipid bilayer systems using CD spectroscopic and AFM measurements, respectively. Then, to yield information on the temperature and pressure dependent conformation and phase state of the lipid bilayer systems, generalized polarization values by the Laurdan fluorescence technique were determined, which report on the conformation and phase state of the lipid bilayer system. The temperature-dependent measurements were carried out in the temperature range 5-70 °C, and the pressure dependent measurements were performed in the range 1-200 MPa. The data show that the effect of the LmrA reconstitution on the conformation and phase state of the lipid matrix depends on the fluidity and hydrophobic matching conditions of the lipid system. The effect is most pronounced for fluid DMPC and DMPC with low cholesterol levels, but minor for longer-chain fluid phospholipids such as DOPC and model raft mixtures such as DOPC/DPPC/cholesterol. The latter have the additional advantage of using lipid sorting to avoid substantial hydrophobic mismatch. Notably, the most drastic effect was observed for the neutral/glycolipid natural lipid mixture. In this case, the impact of LmrA incorporation on the increase of the conformational order of the lipid membrane was most pronounced. As a consequence, the membrane reaches a mechanical stability which makes it very insensitive to application of pressures as high as 200 MPa. The results are correlated with the functional properties of LmrA in these various lipid environments and upon application of high hydrostatic pressure and are discussed in the context of other work on pressure effects on membrane protein systems.     

Role of sterol type on lateral pressure profiles of lipid membranes affecting membrane protein functionality: Comparison between cholesterol, desmosterol, 7-dehydrocholesterol and ketosterol

Lateral pressure profiles have been suggested to play a significant role in many cellular membrane processes by affecting, for example, the activation of membrane proteins through changes in their conformational state. This may be the case if the lateral pressure profile is altered due to changes in molecular composition surrounding the protein. In this work, we elucidate the effect of varying sterol type on the lateral pressure profile, an issue of topical interest due to lipid rafts and their putative role for membrane protein functionality. We find that the lateral pressure profile is altered when cholesterol is replaced by either desmosterol, 7-dehydrocholesterol, or ketosterol. The observed changes in the lateral pressure profile are notable and important since desmosterol and 7-dehydrocholesterol are the immediate precursors of cholesterol along its biosynthetic pathway. The results show that the lateral pressure profile and the resulting elastic behavior of lipid membranes are sensitive to the sterol type, and support a mechanism where changes in protein conformational state are facilitated by changes in the lateral pressure profile. From a structural point of view, the results provide compelling evidence that despite seemingly minor differences, sterols are characterized by structural specificity.     

Effect of acyl chain structure and bilayer phase state on binding and penetration of a supported lipid bilayer by HPA3

The effect of acyl chain structure and bilayer phase state on binding and penetration by the peptide HPA3 was studied using dual polarisation interferometry. This peptide is an analogue of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1) which has been shown to have antimicrobial and cell-penetrating properties. The binding of HPA3 to zwitterionic 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1-palmitolyl-2-oleyl-sn-glycero-3-phosphocholine (POPC) and negatively charged membranes composed of DMPC and 1,2-dimyristoyl-sn-glycero-3-(phosphor-rac-(1-glycerol)) (DMPG) or POPC and 1-palmitolyl-2-oleyl-sn-glycero-3-(phosphor-rac-(1-glycerol)) (POPG) was determined using dual polarisation interferometry (DPI). Mass and birefringence were measured in real time, enabling the creation of birefringence–mass plots for detailed analysis of the changes in lipid bilayer order during the peptide-binding process. HPA3 bound to all four lipids and the binding progressed as a single phase for the saturated gel phase bilayers DMPC and DMPC–DMPG. However, the binding process involved two or more phases, with penetration of the unsaturated fluid phase POPC and POPC–POPG bilayers. Structural changes in the saturated bilayer were partially reversible whereas binding to the unsaturated bilayer resulted in irreversible changes in membrane structure. These results demonstrate that more disordered unsaturated bilayers are more susceptible to further disorganisation and have a lower capacity to recover from peptide-induced structural changes than saturated ordered bilayers. In addition, this study further establishes DPI as powerful tool for analysis of multiphase peptide-insertion processes associated with complex structural changes in the liquid-crystalline membrane.     

Lipid bilayer pressure profiles and mechanosensitive channel gating

The function of membrane proteins often depends on the proteins' interaction with their lipid environment, spectacularly so in the case of mechanosensitive channels, which are gated through tension mediated by the surrounding lipids. Lipid bilayer tension is distributed quite inhomogeneously, but neither the scale at which relevant variation takes place nor the effect of varying lipid composition or tension has yet been investigated in atomic detail. We calculated lateral pressure profile distributions in lipid bilayers of various composition from all-atom molecular dynamics simulations totaling 110.5 ns in length. Reproducible pressure profile features at the 1 A length scale were determined. Lipids with phosphatidylcholine headgroups were found to shift the lateral pressure out of the hydrophobic core and into the headgroup region by an amount that is independent of area per lipid. POPE bilayers simulated at areas smaller than optimal exerted dramatically higher lateral pressure in a narrow region at the start of the aliphatic chain. Stretching of POPC bilayers increased tension predominantly in the same region. A simple geometric analysis for the gating of the mechanosensitive channel MscL suggests that pressure profiles affect its gating through the second moment of the profile in a tension-independent manner.     

The membrane insertion of helical antimicrobial peptides from the N-terminus of Helicobacter pylori ribosomal protein L1

The interaction of two helical antimicrobial peptides, HPA3 and HPA3P with planar supported lipid membranes was quantitatively analysed using two complementary optical biosensors. The peptides are analogues of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1). The binding of these two peptide analogues to zwitterionic dimyristoyl-phosphatidylcholine (DMPC) and negatively charged membranes composed of DMPC/dimyristoylphosphatidylglycerol (DMPG) (4:1) was determined using surface plasmon resonance (SPR) and dual polarisation interferometry (DPI). Using SPR analysis, it was shown that the proline substitution in HPA3P resulted in much lower binding for both zwitterionic and anionic membranes than HPA3. Structural changes in the planar DMPC and DMPC/DMPG (4:1) bilayers induced by the binding of both Hp(2-20) analogues were then resolved in real-time with DPI. The overall process of peptide-induced changes in membrane structure was analysed by the real-time changes in bound peptide mass as a function of bilayer birefringence. The insertion of both HPA3 and HPA3P into the supported lipid bilayers resulted in a decrease in birefringence with increasing amounts of bound peptide which reflects a decrease in the order of the bilayer. The binding of HPA3 to each membrane was associated with a higher level of bound peptide and greater membrane lipid disordering and a faster and higher degree of insertion into the membrane than HPA3P. Furthermore, the binding of both HPA3 and HPA3P to negatively charged DMPC/DMPG bilayers also leads to a greater disruption of the lipid ordering. These results demonstrate the geometrical changes in the membrane upon peptide insertion and the extent of membrane structural changes can be obtained quantitatively. Moreover, monitoring the effect of peptides on a structurally characterised bilayer has provided further insight into the role of membrane structure changes in the molecular basis of peptide selectivity and activity and may assist in defining the mode of antimicrobial action.     

Solid-State H NMR Shows Equivalence of Dehydration and Osmotic Pressures in Lipid Membrane Deformation

Lipid bilayers represent a fascinating class of biomaterials whose properties are altered by changes in pressure or temperature. Functions of cellular membranes can be affected by nonspecific lipid-protein interactions that depend on bilayer material properties. Here we address the changes in lipid bilayer structure induced by external pressure. Solid-state ²H NMR spectroscopy of phospholipid bilayers under osmotic stress allows structural fluctuations and deformation of membranes to be investigated. We highlight the results from NMR experiments utilizing pressure-based force techniques that control membrane structure and tension. Our ²H NMR results using both dehydration pressure (low water activity) and osmotic pressure (poly(ethylene glycol) as osmolyte) show that the segmental order parameters (S_CD) of DMPC approach very large values of ≈0.35 in the liquid-crystalline state. The two stresses are thermodynamically equivalent, because the change in chemical potential when transferring water from the interlamellar space to the bulk water phase corresponds to the induced pressure. This theoretical equivalence is experimentally revealed by considering the solid-state ²H NMR spectrometer as a virtual osmometer. Moreover, we extend this approach to include the correspondence between osmotic pressure and hydrostatic pressure. Our results establish the magnitude of the pressures that lead to significant bilayer deformation including changes in area per lipid and volumetric bilayer thickness. We find that appreciable bilayer structural changes occur with osmotic pressures in the range of 10−100 atm or lower. This research demonstrates the applicability of solid-state ²H NMR spectroscopy together with bilayer stress techniques for investigating the mechanism of pressure sensitivity of membrane proteins.     

Solid-state ²H NMR shows equivalence of dehydration and osmotic pressures in lipid membrane deformation

Lipid bilayers represent a fascinating class of biomaterials whose properties are altered by changes in pressure or temperature. Functions of cellular membranes can be affected by nonspecific lipid-protein interactions that depend on bilayer material properties. Here we address the changes in lipid bilayer structure induced by external pressure. Solid-state 2H NMR spectroscopy of phospholipid bilayers under osmotic stress allows structural fluctuations and deformation of membranes to be investigated. We highlight the results from NMR experiments utilizing pressure-based force techniques that control membrane structure and tension. Our 2H NMR results using both dehydration pressure (low water activity) and osmotic pressure (poly(ethylene glycol) as osmolyte) show that the segmental order parameters (S(CD)) of DMPC approach very large values of ≈ 0.35 in the liquid-crystalline state. The two stresses are thermodynamically equivalent, because the change in chemical potential when transferring water from the interlamellar space to the bulk water phase corresponds to the induced pressure. This theoretical equivalence is experimentally revealed by considering the solid-state 2H NMR spectrometer as a virtual osmometer. Moreover, we extend this approach to include the correspondence between osmotic pressure and hydrostatic pressure. Our results establish the magnitude of the pressures that lead to significant bilayer deformation including changes in area per lipid and volumetric bilayer thickness. We find that appreciable bilayer structural changes occur with osmotic pressures in the range of 10-100 atm or lower. This research demonstrates the applicability of solid-state 2H NMR spectroscopy together with bilayer stress techniques for investigating the mechanism of pressure sensitivity of membrane proteins.     

Tuning ion channel mechanosensitivity by asymmetry of the transbilayer pressure profile

Mechanical stimuli acting on the cellular membrane are linked to intracellular signaling events and downstream effectors via different mechanoreceptors. Mechanosensitive (MS) ion channels are the fastest known primary mechano-electrical transducers, which convert mechanical stimuli into meaningful intracellular signals on a submillisecond time scale. Much of our understanding of the biophysical principles that underlie and regulate conversion of mechanical force into conformational changes in MS channels comes from studies based on MS channel reconstitution into lipid bilayers. The bilayer reconstitution methods have enabled researchers to investigate the structure-function relationship in MS channels and probe their specific interactions with their membrane lipid environment. This brief review focuses on close interactions between MS channels and the lipid bilayer and emphasizes the central role that the transbilayer pressure profile plays in mechanosensitivity and gating of these fascinating membrane proteins.     

Effects of polypeptide-phospholipid interactions on bilayer reorganizations Raman spectroscopic study of the binding of polymyxin B to dimyristoylphosphatidic acid and dimyristoylphosphatidylcholine dispersions

The interactions of the antibiotic polymixin B, a polycationic cyclic polypeptide containing a branched acyl side chain, with dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidic acid (DMPA) bilayers were investigated by Raman spectroscopy for a wide range of lipid/polypeptide mole fractions. Temperature profiles, constructed from peak height intensity ratios derived from the lipid methylene C-H stretching and acyl chain C-C stretching mode regions, reflected changes originating from lateral chain packing effects and intrachain trans / gauche rotamer formation, respectively. For DMPC/polymyxin B bilayers the temperature dependent curves indicate a broadening of the gel-liquid crystalline phase transition accompanied by an approx. 3 C deg. increase in the phase transition temperature from 22.8°C for the pure bilayer to 26°C for the polypeptide complex. For a 10:1 lipid/polypeptide mole ratio the temperature profile derived from the C-C mode spectral parameters displays a second order/disorder transition, at approx. 35.5°C, associated with the melting behavior of approximately three bilayer lipids immobilized by the antibiotic's charged cyclic headgroup and hydrophobic side chain. For the 10:1 mole ratio DMPA/polypeptide liposomes, the temperature profiles indicate three order/disorder transitions at 46, 36 and 24°C. Pure DMPA bilayers display a sharp lamellar-micellar phase transition at 51°C.     

Protein shape change has a major effect on the gating energy of a mechanosensitive channel

Increasing experimental evidence has shown that membrane protein functionality depends on molecular composition of cell membranes. However, the origin of this dependence is not fully understood. It is reasonable to assume that specific lipid-protein interactions are important, yet more generic effects due to mechanical properties of lipid bilayers likely play a significant role too. Previously it has been demonstrated using models for elastic properties of membranes and lateral pressure profiles of lipid bilayers that the mechanical properties of a lipid bilayer can contribute as much as ∼10 k_BT to the free energy difference associated with a change in protein conformational state. Here, we extend those previous approaches to a more realistic model for a large mechanosensitive channel (MscL). We use molecular dynamics together with the MARTINI model to simulate the open and closed states of MscL embedded in a DOPC bilayer. We introduce a procedure to calculate the mechanical energy change in the channel gating using a three-dimensional pressure distribution inside a membrane, computed from the molecular dynamics simulations. We decompose the mechanical energy to terms associated with area dilation and shape contribution. Our results highlight that the lateral pressure profile of a lipid bilayer together with the shape change in gating can induce a contribution of ∼30 k_BT on the gating energy of MscL. This contribution arises largely from the interfacial tension between hydrophobic and hydrophilic regions in a lipid bilayer.     

Monitoring the effects of strong cosolvent hexafluoroisopropanol in investigation of the tetrameric structure and stability of K-channel KcsA

Adsorption of small chain alcohols into lipid membranes significantly changes the conformational states of intrinsic membrane proteins. In this study, the effects of membrane-active strong cosolvent hexafluoroisopropanol (HFIP) on the intrinsic tetrameric stability of potassium channel KcsA were investigated. Presence of acidic phosphatidylglycerol (PG) in non-bilayer phosphatidylethanolamine (PE) or bilayer phosphatidylcholine (PC) significantly increased the tetrameric stability compared to zwitterionic pure PC bilayers. The stabilizing effect of PG in both lipid bilayers was completely abolished upon deletion of the membrane-anchored N-terminus. Tryptophan fluorescence and circular dichroism experiments indicated that HFIP destabilizes the tetramer possibly via drastic changes in the lateral pressure profile close to the membrane-water interface. The data suggest that HFIP disturbs the ionic, H-bonding and hydrophobic interactions among KcsA subunits where N-terminus presumably plays a crucial role in determining the channel proper folding and tetrameric structure via ionic/H-bond interactions between the helix dipole and the membrane lipids.     

Cadmium-induced changes in the membrane of human erythrocytes and molecular models

The structural effects of cadmium on cell membranes were studied through the interaction of Cd(2+) ions with human erythrocytes and their isolated unsealed membranes (IUM). Studies were carried out by scanning electron microscopy and fluorescence spectroscopy, respectively. Cd(2+) induced shape changes in erythrocytes, which took the form of echinocytes. According to the bilayer couple hypothesis, this result meant that Cd(2+) ions located in the outer monolayer of the erythrocyte membrane. Fluorescence spectroscopy measurements in IUM indicated a disordering effect at both the polar headgroup and the acyl chain packing arrangements of the membrane phospholipid bilayer. Cd(2+) ions also interacted with molecular models of the erythrocyte membrane consisting in bilayers of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidylethanolamine (DMPE), representing classes of phospholipids located in the outer and inner monolayers the erythrocyte membrane, respectively. X-ray diffraction indicated that Cd(2+) ions induced structural perturbation of the polar headgroup and of the hydrophobic acyl regions of DMPC, while the effects of cadmium on DMPE bilayers were much milder. This conclusion is supported by fluorescence spectroscopy measurements on DMPC large unilamellar vesicles (LUV). All these findings point to the important role of phospholipid bilayers in the interaction of cadmium on cell membranes.     

The influence of cholesterol on interactions and dynamics of ibuprofen in a lipid bilayer

In this work, molecular dynamics (MD) simulations with atomistic details were performed to examine the influence of the cholesterol on the interactions and the partitioning of the hydrophobic drug ibuprofen in a fully hydrated 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayer. Analysis of MD simulations indicated that ibuprofen molecules prefer to be located in the hydrophobic acyl chain region of DMPC/cholesterol bilayers. This distribution decreases the lateral motion of lipid molecules. The presence of ibuprofen molecules in the bilayers with 0 and 25 mol% cholesterol increases the ordering of hydrocarbon tails of lipids whereas for the bilayers with 50 mol% cholesterol, ibuprofen molecules perturb the flexible chains of DMPC lipids which leads to the reduction of the acyl chain order parameter. The potential of the mean force (PMF) method was used to calculate the free energy profile for the transferring of an ibuprofen molecule from the bulk water into the DMPC/cholesterol membranes. The PMF studies indicated that the presence of 50 mol% cholesterol in the bilayers increases the free energy barrier and slows down the permeation of the ibuprofen drug across the DMPC bilayer. This can be due to the condensing and ordering effects of the cholesterol on the bilayer.     

Solid‐state NMR and simulation studies of equinatoxin II N‐terminus interaction with lipid bilayers

The interaction with model membranes of a peptide, EqtII_1–32, corresponding to the N‐terminal region of the pore‐forming toxin equinatoxin II (EqtII) has been studied using solid‐state NMR and molecular dynamics (MD) simulations. The distances between specifically labeled nuclei in [¹⁹F‐para]Phe16‐[1‐¹³C]Leu19 and [¹⁹F‐para]Phe16‐[¹⁵N]Leu23 analogs of EqtII_1–32 measured by REDOR in lyophilized peptide were in agreement with published crystal and solution structures. However, in both DMPC and mixed DMPC:SM membrane environments, significant changes in the distances between the labeled amino acid pairs were observed, suggesting changes in helical content around the experimentally studied region, 16–23, in the presence of bilayers. ¹⁹F‐³¹P REDOR experiments indicated that the aromatic ring of Phe16 is in contact with lipid headgroups in both membrane environments. For the DMPC:SM mixed bilayers, a closer interaction between Phe16 side chains and lipid headgroups was observed, but an increase in distances was observed for both labeled amino acid pairs compared with those measured for EqtII_1–32 in pure DMPC bilayers. The observed differences between DMPC and DMPC:SM bilayers may be due to the greater affinity of EqtII for the latter. MD simulations of EqtII_1–32 in water, on a pure DMPC bilayer, and on a mixed DMPC:SM bilayer indicate significant peptide secondary structural differences in the different environments, with the DMPC‐bound peptide adopting helical formations at residues 16–24, whereas the DMPC:SM‐bound peptide exhibits a longer helical stretch, which may contribute to its enhanced activity against PC:SM compared with pure PC bilayers. Proteins 2010. © 2009 Wiley‐Liss, Inc.     

Bilayer polarity and its thermal dependency in the ?o and ?d phases of binary phosphatidylcholine/cholesterol mixtures

Diverse variations in membrane properties are observed in binary phosphatidylcholine/cholesterol mixtures. These mixtures are nonideal, displaying single or phase coexistence, depending on chemical composition and other thermodynamic parameters. When compared with pure phospholipid bilayers, there are changes in water permeability, bilayer thickness and thermomechanical properties, molecular packing and conformational freedom of phospholipid acyl chains, in internal dipolar potential and in lipid lateral diffusion. Based on the phase diagrams for DMPC/cholesterol and DPPC/cholesterol, we compare the equivalent polarity of pure bilayers with specific compositions of these mixtures, by using the Py empirical scale of polarity. Besides the contrast between pure and mixed lipid bilayers, we find that liquid-ordered (?_o) and liquid-disordered (?_d) phases display significantly different polarities. Moreover, in the ?_o phase, the polarities of bilayers and their thermal dependences vary with the chemical composition, showing noteworthy differences for cholesterol proportions at 35, 40, and 45 mol%. At 20 °C, for DMPC/cholesterol at 35 and 45 mol%, the equivalent dielectric constants are 21.8 and 23.8, respectively. Additionally, we illustrate potential implications of polarity in various membrane-based processes and reactions, proposing that for cholesterol containing bilayers, it may also go along with the occurrence of lateral heterogeneity in biological membranes.