Intermolecular disulfide bonding in IgM: effects of replacing cysteine residues in the mu heavy chain.

The conventional model of polymeric IgM depicts a unique structure in which the mu heavy chains and J chain are joined by well defined disulfide bonds involving cysteine residues at positions 337, 414 and 575 of the mu chain. To test this model, we have used site directed mutagenesis to produce IgM in which these cysteines have been replaced by serine. In each case the single mutants were able to assemble polymeric IgM, which was analyzed for its size, morphology, J chain content and activity in complement dependent cytolysis. Whereas normal polymeric IgM is composed predominantly of pentameric and hexameric molecules, the mutant IgM-Ser414 is covalently assembled as pentamers and smaller forms; IgM-Ser575 is assembled as covalent hexamers. IgM-Ser337 appears to include the same pentameric and hexameric forms as normal IgM except that, unlike normal polymeric IgM, most pentameric/hexameric IgM-Ser337 is not covalently assembled. J chain is present in polymeric IgM-Ser337 but absent in polymeric IgM-Ser414 and IgM-Ser575. IgM-Ser414 is defective in activating the classical pathway of complement dependent cytolysis. Our observations are consistent with models in which the covalent linkages between mu chains are mediated by disulfide bonded Cys337-Cys337, Cys414-Cys414 and Cys575-Cys575 but indicate that the arrangement of these Cys-Cys pairs in series and in parallel varies among and within IgM molecules.(ABSTRACT TRUNCATED AT 250 WORDS)     

A comparison of folding techniques in the chemical synthesis of the epidermal growth factor-like domain in neu differentiation factor alpha/beta.

The 52-residue alpha/beta chimera of the epidermal growth factor-like domain in neu differentiation factor (NDFealpha/beta) has been synthesized and folded to form a three disulfide bridge (Cys182-Cys196, Cys190-Cys210, Cys212-Cys221) containing peptide. We investigated two general strategies for the formation of the intramolecular disulfide bridges including, the single-step approach, which used fully deprotected and reduced peptide, and a sequential approach that relied on orthogonal cysteine protection in which specific pairs are excluded from the first oxidation step. Because there are 15 possible disulfide bridge arrangements in a peptide with six cysteines, the one-step approach may not always provide the desired disulfide pairing. Here, we compare the single-step approach with a systematic evaluation of the sequential approach. We employed the acetamidomethyl group to protect each pair of cysteines involved in disulfide bridges, i.e. Cys182 to Cys196, Cys190 to Cys210 and Cys212 to Cys221. This reduced the number of possible disulfide patterns from 15 to three in the first folding step. We compared the efficiencies of folding for each protected pair using RP-HPLC, mapped the disulfide connectivity of the predominant product and then formed the final disulfide from the partially folded intermediate via 12 oxidation. Only the peptide having the Cys182-Cys196 pair blocked with acetamidomethyl forms the desired disulfide isomer (Cys190-Cys210/Cys212-Cys221) as a single homogeneous product. By optimizing both approaches, as well as other steps in the synthesis, we can now rapidly provide large-scale syntheses of NDFealpha/beta and other novel EGF-like peptides.     

Topology of the disulfide bonds in the antiviral lectin scytovirin

The antiviral lectin scytovirin (SVN) contains a total of five disulfide bonds in two structurally similar domains. Previous reports provided contradictory results on the disulfide pairing in each individual domain, and we have now re‐examined the disulfide topology. N‐terminal sequencing and mass spectrometry were used to analyze proteolytic fragments of native SVN obtained at acidic pH, yielding the assignment as Cys7–Cys55, Cys20–Cys32, Cys26–Cys38, Cys68–Cys80, and Cys74–Cys86. We also analyzed the N‐terminal domain of SVN (SD1, residues 1–48) prepared by expression/oxidative folding of the recombinant protein and by chemical synthesis. The disulfide pairing in the chemically synthesized SD1 was forced into predetermined topologies: SD1A (Cys20–Cys26, Cys32–Cys38) or SD1B (Cys20–Cys32, Cys26–Cys38). The topology of native SVN was found to be in agreement with the SD1B and the one determined for the recombinant SD1 domain. Although the two synthetic forms of SD1 were distinct when subjected to chromatography, their antiviral properties were indistinguishable, having low nM activity against HIV. Tryptic fragments, the “cystine clusters” [Cys20–Cys32/Cys26–Cys38; SD1] and [Cys68–Cys80/Cys74–C‐86; SD2], were found to undergo rapid disulfide interchange at pH 8. This interchange resulted in accumulation of artifactual fragments in alkaline pH digests that are structurally unrelated to the original topology, providing a rational explanation for the differences between the topology reported herein and the one reported earlier (Bokesh et al., Biochemistry 2003;42:2578–2584). Our observations emphasize the fact that proteins such as SVN, with disulfide bonds in close proximity, require considerable precautions when being fragmented for the purpose of disulfide assignment.     

Subunit molecular mass assignment of 14,654 Da to the soluble beta-galactoside-binding lectin from bovine heart muscle and demonstration of intramolecular disulfide bonding associated with oxidative inactivation.

The soluble dimeric beta-galactoside-binding lectin (subunit molecular mass, approximately 14 kDa) of bovine heart muscle, in common with the 14-kDa lectins of several other animal species, displays carbohydrate-binding activity when it is in the reduced state, but the purified lectin loses this activity upon oxidation. In the present study, the presence of any post-translational modification and the mechanism of the oxidative inactivation have been investigated by analyses of the reduced and oxidized forms of the purified bovine lectin by electrospray ionization-mass spectrometry (ESI-MS) and by liquid secondary ion mass spectrometry (LSIMS) of tryptic and peptic peptides. By ESI-MS, the molecular mass of the reduced lectin is determined to be 14,654.6 +/- 0.9 Da, and that of the oxidized lectin is 14,649.3 +/- 1.1 Da. These masses correspond to the amino acid sequence of the protein with the cysteines having free sulfhydryl groups in the reduced state and forming disulfide bonds in the oxidized state. There is no evidence of post-translational modification in either lectin form except for monoacetylation already predicted for alanine at the blocked N-terminal end. Pronounced differences in charge distribution in the electrospray ionization mass spectra of the reduced and oxidized lectin, reflecting a change in the number of accessible protonation sites in the oxidized protein, are consistent with the protein being held in an altered conformation by covalent bonding. The results of LSIMS analyses of tryptic and peptic peptides in conjunction with Edman sequencing indicate that disulfide bonding occurs predominantly between Cys2 and Cys130, Cys16 and Cys88, and Cys42 and Cys60. There is no evidence of oxidation of Trp68. These results, taken together with observations that almost the complete polypeptide chain is necessary for the functional integrity of the carbohydrate recognition domain (Abbott, W. M., and Feizi, T. (1991) J. Biol. Chem. 266, 5552-5557) point to intramolecular disulfide bonding with a change in protein folding and conformation as the mechanism of oxidative inactivation of the purified bovine lectin.     

Neighboring cysteine residues in human fucosyltransferase VII are engaged in disulfide bridges, forming small loop structures.

Among alpha 3-fucosyltransferases (alpha3-FucTs) from most species, four cysteine residues appear to be highly conserved. Two of these cysteines are located at the N-terminus and two at the C-terminus of the catalytic domain. FucT VII possesses two additional cysteines in close proximity to each other located in the middle of the catalytic domain. We identified the disulfide bridges in a recombinant, soluble form of human FucT VII. Potential free cysteines were modified with a biotinylated alkylating reagent, disulfide bonds were reduced and alkylated with iodoacetamide, and the protein was digested with either trypsin or chymotrypsin, before characterization by high-performance liquid chromatography/electrospray ionization mass spectrometry. More than 98% of the amino acid sequence for the truncated enzyme (beginning at amino acid 53) was verified. Mass spectrometry analysis also demonstrated that both potential N-linked sites are occupied. All six cysteines in the FucT VII sequence were shown to be disulfide-linked. The pairing of the cysteines was determined by proteolytic cleavage of nonreduced protein and subsequent analysis by mass spectrometry. The results demonstrated that Cys(68)-Cys(76), Cys(211)-Cys(214), and Cys(318)-Cys(321) are disulfide-linked. We have used this information, together with a method of fold recognition and homology modeling, using the (alpha/beta)(8)-barrel fold of Escherichia coli dihydrodipicolinate synthase as a template to propose a model for FucT VII.     

The N-terminal disulfide linkages of human insulin-like growth factor-binding protein-6 (hIGFBP-6) and hIGFBP-1 are different as determined by mass spectrometry.

The actions of insulin-like growth factors (IGFs) are modulated by a family of six high affinity binding proteins (IGFBPs 1-6). IGFBP-6 differs from other IGFBPs in having the highest affinity for IGF-II and in binding IGF-I with 20-100-fold lower affinity. IGFBPs 1-5 contain 18 conserved cysteines, but human IGFBP-6 lacks 2 of the 12 N-terminal cysteines. The complete disulfide linkages of IGFBP-6 were determined using electrospray ionization mass spectrometry of purified tryptic peptide complexes digested with combinations of chymotrypsin, thermolysin, and endoproteinase Glu-C. Numbering IGFBP-6 cysteines sequentially from the N terminus, the first three disulfide linkages are Cys1-Cys2, Cys3-Cys4, and Cys5-Cys6. The next two linkages are Cys7-Cys9 and Cys8-Cys10, which are analogous to those previously determined for IGFBP-3 and IGFBP-5. The C-terminal linkages are Cys11-Cys12, Cys13-Cys14, and Cys15-Cys16, analogous to those previously determined for IGFBP-2. Disulfide linkages of IGFBP-1 were partially determined and show that Cys1 is not linked to Cys2 and Cys3 is not linked to Cys4. Analogous with IGFBP-3, IGFBP-5, and IGFBP-6, Cys9-Cys11 and Cys10-Cys12 of IGFBP-1 are also disulfide-linked. The N-terminal linkages of IGFBP-6 differ significantly from those of IGFBP-1 (and, by implication, the other IGFBPs), which could contribute to the distinctive IGF binding properties of IGFBP-6.     

Two-step selective formation of three disulfide bridges in the synthesis of the C-terminal epidermal growth factor-like domain in human blood coagulation factor IX.

The 45-residue C-terminal EGF-like domain in human blood coagulation factor IX has been synthesized by a 2-step method to form selectively 3 disulfide bridges. Four out of 6 cysteines are blocked with either trityl or 4-methyl-benzyl, and the remaining 2 cysteines are blocked with acetamidomethyl (Acm). In the first step, 4 free cysteinyl thiols are released concurrently with the removal of all protecting groups except Acm and are oxidized to form 1 of the 3 possible isomers containing 2 pairs of disulfides. In the second step, iodine is used to remove the Acm groups to yield the third disulfide bridge. This approach reduces the number of possible disulfide bridging patterns from 15 to 3. To determine the optimal protecting group strategy, 3 peptides are synthesized, each with Acm blocking 1 of the 3 pairs of cysteines involved in disulfide bridges: Cys5 to Cys16 (Cys 1-3), Cys12 to Cys26 (Cys 2-4), or Cys28 to Cys41 (Cys 5-6). Only the peptide having the Cys 2-4 pair blocked with Acm forms the desired disulfide isomer (Cys 1-3/5-6) in high yield after the first step folding, as identified by proteolytic digestion in conjunction with mass spectrometric peptide mapping. Thus, the choice of which pair of cysteines to block with Acm is critically important. In the case of EGF-like peptides, it is better to place the Acm blocking groups on one of the pairs of cysteines involved in the crossing of disulfide bonds.     

The isocitrate dehydrogenase kinase/phosphatase from Escherichia coli is highly sensitive to in-vitro oxidative conditions role of cysteine67 and cysteine108 in the formation of a disulfide-bonded homodimer.

Isocitrate dehydrogenase kinase/phosphatase (IDHK/P) is a homodimeric enzyme which controls the oxidative metabolism of Escherichia coli, and exibits a high intrinsic ATPase activity. When subjected to electrophoresis under nonreducing conditions, the purified enzyme migrates partially as a dimer. The proportion of the dimer over the monomer is greatly increased by treatment with cupric 1,10 phenanthrolinate or 5,5'-dithio-bis(2-nitrobenzoic acid), and fully reversed by dithiothreitol, indicating that covalent dimerization is produced by a disulfide bond. To identify the residue(s) involved in this intermolecular disulfide-bond, each of the eight cysteines of the enzyme was individually mutated into a serine. It was found that, under nonreducing conditions, the electrophoretic patterns of all corresponding mutants are identical to that of the wild-type, except for the Cys67-->Ser which migrates exclusively as a monomer and for the Cys108-->Ser which migrates preferentially as a dimer. Furthermore, in contrast to the wild-type enzyme and all the other mutants, the Cys67-->Ser mutant still migrates as a monomer after treatment with cupric 1,10 phenanthrolinate. This result indicates that the intermolecular disulfide bond involves only Cys67 in each IDHK/P wild-type monomer. This was further supported by mass spectrum analysis of the tryptic peptides derived from either the cupric 1,10 phenanthrolinate-treated wild-type enzyme or the native Cys108-->Ser mutant, which show that they both contain a Cys67-Cys67 disulfide bond. Moreover, both the cupric 1,10 phenanthrolinate-treated wild-type enzyme and the native Cys108-->Ser mutant contain another disulfide bond between Cys356 and Cys480. Previous results have shown that this additional Cys356-Cys480 disulfide bond is intramolecular [Oudot, C., Jault, J.-M., Jaquinod, M., Negre, D., Prost, J.-F., Cozzone, A.J. & Cortay, J.-C. (1998) Eur. J. Biochem. 258, 579-585].     

Isolation and characterization of disulfide-bonded peptides from the three globular domains of aggregating cartilage proteoglycan

The aggregating cartilage proteoglycan core protein contains two globular domains near the N terminus (G1 and G2) and one near the C terminus (G3). The G1-G3 domains contain 10, 8, and 10 cysteine residues, respectively. The disulfide assignments of the G1 domain have previously been deduced (Neame, P. J., Christner, J. E., and Baker, J. R. (1987) J. Biol. Chem. 262, 17768-17778) as Cys1-Cys2, Cys3-Cys6, Cys4-Cys5, Cys7-Cys10, and Cys8-Cys9, in which the numbers cited after the half-cystine residues are their relative positions from the N terminus. Here we describe a method for the isolation of disulfide-bonded peptides from tryptic digests of bovine nasal cartilage monomer. Sequence analysis of these peptides has allowed us to confirm the pairings previously determined for the G1 domain and to assign a disulfide pattern for the G2 domain of Cys11-Cys14, Cys12-Cys13, Cys15-Cys18, and Cys16-Cys17, in which the Cys15-Cys18 pairing was deduced indirectly. Similarly, for the G3 domain, a pattern of Cys19-Cys20, Cys21-Cys24, Cys22-Cys23, Cys25-Cys27, and Cys26-Cys28 was assigned, in which the Cys22-Cys23 pair was deduced indirectly. The G2 domain therefore contains disulfide bonding which is characteristic of the tandem repeat structures found in the G1 domain and link protein, and the G3 domain contains the three disulfide linkages previously assigned to the family of C-type animal lectins. The method described here, which combines anion-exchange, cation-exchange, and reversed-phase chromatography, should have broad application to the isolation of disulfide-bonded peptides from other heavily glycosylated proteins and proteoglycans.     

Respiratory chain strongly oxidizes the CXXC motif of DsbB in the Escherichia coli disulfide bond formation pathway

Escherichia coli DsbB has four essential cysteine residues, among which Cys41 and Cys44 form a CXXC redox active site motif and the Cys104-Cys130 disulfide bond oxidizes the active site cysteines of DsbA, the disulfide bond formation factor in the periplasm. Functional respiratory chain is required for the cell to keep DsbA oxidized. In this study, we characterized the roles of essential cysteines of DsbB in the coupling with the respiratory chain. Cys104 was found to form the inactive complex with DsbA under respiration-defective conditions. While DsbB, under normal aerobic conditions, is in the oxidized state, having two intramolecular disulfide bonds, oxidation of Cys104 and Cys130 requires the presence of Cys41-Cys44. Remarkably, the Cys41-Cys44 disulfide bond is refractory to reduction by a high concentration of dithiothreitol, unless the membrane is solubilized with a detergent. This reductant resistance requires both the respiratory function and oxygen, since Cys41-Cys44 became sensitive to the reducing agent when membrane was prepared from quinone- or heme-depleted cells or when a membrane sample was deaerated. Thus, the Cys41-Val-Leu-Cys44 motif of DsbB is kept both strongly oxidized and strongly oxidizing when DsbB is integrated into the membrane with the normal set of respiratory components.     

Probing the dark state tertiary structure in the cytoplasmic domain of rhodopsin: proximities between amino acids deduced from spontaneous disulfide bond formation between Cys316 and engineered cysteines in cytoplasmic loop 1

A dark state tertiary structure in the cytoplasmic domain of rhodopsin is presumed to be the key to the restriction of binding of transducin and rhodopsin kinase to rhodopsin. Upon light-activation, this tertiary structure undergoes a conformational change to form a new structure, which is recognized by the above proteins and signal transduction is initiated. In this and the following paper in this issue [Cai, K., Klein-Seetharaman, J., Altenbach, C., Hubbell, W. L., and Khorana, H. G. (2001) Biochemistry 40, 12479-12485], we probe the dark state cytoplasmic domain structure in rhodopsin by investigating proximity between amino acids in different regions of the cytoplasmic face. The approach uses engineered pairs of cysteines at predetermined positions, which are tested for spontaneous formation of disulfide bonds between them, indicative of proximity between the original amino acids. Focusing here on proximity between the native cysteine at position 316 and engineered cysteines at amino acid positions 55-75 in the cytoplasmic sequence connecting helices I-II, disulfide bond formation was studied under strictly defined conditions and plotted as a function of the position of the variable cysteines. An absolute maximum was observed for position 65 with two additional relative maxima for cysteines at positions 61 and 68. The observed disulfide bond formation rates correlate well with proximity of these residues found in the crystal structure of rhodopsin in the dark. Modeling of the engineered cysteines in the crystal structure indicates that small but significant motions are required for productive disulfide bond formation. During these motions, secondary structure elements are retained as indicated by the lack of disulfide bond formation in cysteines that do not face toward Cys316 in the crystal structure model. Such motions may be important in light-induced conformational changes.     

Membrane immunoglobulins are stabilized by interchain disulfide bonds occurring within the extracellular membrane-proximal domain

Membrane-bound immunoglobulins have, in addition to the transmembrane and cytoplasmic portions, an extracellular membrane-proximal domain (EMPD), absent in the secretory forms. EMPDs of immunoglobulin isotypes alpha, gamma, and epsilon contain cysteines whose role has so far not been elucidated. Using a genetic strategy, we investigated the ability of these cysteines to form disulfide bridges. Shortened versions of human membrane immunoglobulins, depleted of cysteines known to form intermolecular disulfide bonds, were constructed and expressed on the surface of a B-cell line. The resulting membrane proteins contain a single chain fragment of variable regions (scFv) linked to the dimerizing domain from the immunoglobulin heavy chains (CH3 for alpha and gamma or CH4 for epsilon isotypes), followed by the corresponding EMPD and the transmembrane and cytoplasmic domains. The two functional membrane versions of the epsilon chain, containing the short and long EMPD, were analyzed. Our results show that the single cysteine within alpha1L and gamma1 EMPD and the short version of epsilon EMPD form an interchain disulfide bond. Conversely, the cysteine resident in the epsilon transmembrane domain remains unreacted. epsilon-long EMPD contains four cysteines; two are involved in interchain bonds while the remaining two are likely forming an intrachain bridge. Expression of a full-length membrane epsilon heavy chain mutant, in which Cys(121) and Cys(209) within domain CH2 (involved in interchain bridges) were mutated to alanines, confirmed that, within the complete IgE, EMPD cysteines form interchain disulfide bonds. In conclusion, we unveil evidence for additional covalent stabilization of membrane-bound immunoglobulins.     

Cloning and sequence analysis of channel catfish heavy chain cDNA indicate phylogenetic diversity within the IgM immunoglobulin family

Catfish cDNA libraries were constructed using the poly(A+) RNA obtained from in vitro stimulated catfish leukocytes. Antigenic analysis with different antisera to catfish Ig resulted in the definition of cDNA clones encoding the catfish H chain. Sequence analysis confirmed that the catfish H chain was definitively identified, based on its similarities with chicken and mouse mu chains. Two clones were each shown to encode part of the CH2 domain, the complete CH3 and CH4 domains, the C-terminus, and a 184-bp 3' untranslated region before the poly(A+) tail. The conservation of domain size and structure is clearly evident. The two cysteines forming the intradomain disulfide bridge, as well as the tryptophans located within each domain, are absolutely conserved. There are four carbohydrate acceptor sites in the catfish H chain, only one of which is phylogenetically conserved. Of the six sequenced H chain clones, one was found to differ in a single base in the CH3, which results in the loss of a carbohydrate acceptor site. Whether this difference indicates isotypic variation between closely related genes or somatic mutation is unresolved. Amino acid sequence comparisons indicate that there is a approximately 24% similarity when the catfish H chain is aligned with mouse mu chains. This is considerably less than the approximately 40% amino acid conservation found between the chicken and mouse mu chain. The amino acid sequence of the catfish H chain is most conserved in the C-terminus (approximately 30%) and the CH4 (approximately 26%); there is less conservation in the CH3 (approximately 20%) when comparisons are made with mouse mu chain. The CH3 domain of the catfish H chain also has different hydropathy properties, when compared with the CH3 domain of the higher vertebrate mu chains. Finally, the sequence of the catfish H chain indicates an unusual arrangement of the cysteines that likely participate in intersubunit and inter-H chain disulfide linkages. The disulfide linkage of these cysteines during Ig polymerization may account for the unusual covalent architecture associated with the catfish tetramer.     

The Venus's-flytrap and cysteine-rich domains of the human Ca2+ receptor are not linked by disulfide bonds

The extracellular N-terminal domain of the human Ca(2+) receptor (hCaR) consists of a Venus's-flytrap (VFT) domain and a cysteine-rich (Cys-rich) domain. We have shown earlier that the Cys-rich domain is critical for signal transmission from the VFT domain to the seven-transmembrane domain. The VFT domain contains 10 cysteines: two of them (Cys(129) and Cys(131)) were identified as involved in intermolecular disulfide bonds necessary for homodimerization, and six others (Cys(60)-Cys(101), Cys(358)-Cys(395), and Cys(437)-Cys(449)) are predicted to form three intramolecular disulfide bonds. The Cys-rich domain contains nine cysteines, the involvement of which in disulfide bond formation has not been defined. In this work, we asked whether the remaining cysteines in the hCaR VFT, namely Cys(236) and Cys(482), form disulfide bond(s) with cysteines in the Cys-rich domain. We constructed mutant hCaRs with a unique tobacco etch virus (TEV) protease recognition site inserted between the VFT domain and the Cys-rich domain. These mutant hCaRs remain fully functional compared with the wild type hCaR. After TEV protease digestion of the mutant hCaR proteins, dimers of the VFT were identified on Western blot under nonreducing conditions. We concluded that there is no disulfide bond between the VFT and the Cys-rich domains in the hCaR.     

Disulfide bond-coupled folding of bovine pancreatic trypsin inhibitor derivatives missing one or two disulfide bonds.

The disulfide bond-coupled folding and unfolding mechanism (at pH 8.7, 25 degrees C in the presence of oxidized and reduced dithiothreitol) was determined for a bovine pancreatic trypsin inhibitor mutant in which cysteines 30 and 51 were replaced with alanines so that only two disulfides, between cysteines 14 and 38 and cysteines 5 and 55, remain. Similar studies were made on a chemically-modified derivative of the mutant retaining only the 5-55 disulfide. The preferred unfolding mechanism for the Ala30/Ala51 mutant begins with reduction of the 14-38 disulfide. An intramolecular rearrangement via thiol-disulfide exchange, involving the 5-55 disulfide and cysteines 14 and/or 38, then occurs. At least five of six possible one-disulfide bond species accumulate during unfolding. Finally, the disulfide of one or more of the one-disulfide bond intermediates (excluding that with the 5-55 disulfide) is reduced giving unfolded protein. The folding mechanism seems to be the reverse of the unfolding mechanism; the observed folding and unfolding reactions are consistent with a single kinetic scheme. The rate constant for the rate-limiting intramolecular folding step--rearrangements of other one-disulfide bond species to the 5-55 disulfide intermediate--seems to depend primarily on the number of amino acids separating cysteines 5 and 55 in the unfolded chain. The energetics and kinetics of the mutant's folding mechanism are compared to those of wild-type protein [Creighton, T. E., & Goldenberg, D. P. (1984) J. Mol. Biol. 179, 497] and a mutant missing the 14-38 disulfide [Goldenberg, D. P. (1988) Biochemistry 27, 2481]. The most striking effects are destabilization of the native structure and a large increase in the rate of unfolding.     

In HspA from Helicobacter pylori vicinal disulfide bridges are a key determinant of domain B structure

Helicobacter pylori produces a heat shock protein A (HspA) that is unique to this bacteria. While the first 91 residues (domain A) of the protein are similar to GroES, the last 26 (domain B) are unique to HspA. Domain B contains eight histidines and four cysteines and was suggested to bind nickel. We have produced HspA and two mutants: Cys94Ala and Cys94Ala/Cys111Ala and identified the disulfide bridge pattern of the protein. We found that the cysteines are engaged in three disulfide bonds: Cys51/Cys53, Cys94/Cys111 and Cys95/Cys112 that result in a unique closed loop structure for the domain B.     

Mutating the four extracellular cysteines in the chemokine receptor CCR6 reveals their differing roles in receptor trafficking,ligand binding,and signaling

CCR6 is the receptor for the chemokine MIP-3 alpha/CCL20. Almost all chemokine receptors contain cysteine residues in the N-terminal domain and in the first, second, and third extracellular loops. In this report, we have studied the importance of all cysteine residues in the CCR6 sequence using site-directed mutagenesis and biochemical techniques. Like all G protein-coupled receptors, mutating disulfide bond-forming cysteines in the first (Cys118) and second (Cys197) extracellular loops in CCR6 led to complete elimination of receptor activity, which for CCR6 was also associated with the accumulation of the receptor intracellularly. Although two additional cysteines in the N-terminal region and the third extracellular loop, which are present in almost all chemokine receptors, are presumed to form a disulfide bond, this has not been demonstrated experimentally for any of these receptors. We found that mutating the cysteines in the N-terminal domain (Cys36) and the third extracellular loop (Cys288) neither significantly affected receptor surface expression nor completely abolished receptor function. Importantly, contrary to several previous reports, we demonstrated directly that instead of forming a disulfide bond, the N-terminal cysteine (Cys36) and the third extracellular loop cysteine (Cys288) contain free SH groups. The cysteine residues (Cys36 and Cys288), rather than forming a disulfide bond, may be important per se. We propose that CCR6 forms only a disulfide bond between the first (Cys118) and second (Cys197) extracellular loops, which confines a helical bundle together with the N-terminus adjacent to the third extracellular loop, creating the structural organization critical for ligand binding and therefore for receptor signaling.     

The status of half-cystine residues and locations of N-glycosylated asparagine residues in human eosinophil peroxidase

The determination by protein chemistry methods of the half-cystine status in human eosinophil peroxidase (EPO) is reported. EPO is two-chained and has a total of 14 half-cystine residues. Cys141 and Cys152 form an intrachain bridge in the light chain of EPO. Disulfide bridges connect Cys253 and Cys263, Cys257 and Cys287, Cys359 and Cys370, Cys570 and Cys635, and Cys676 and Cys701, forming five intrachain disulfide bridges in the heavy chain of EPO. Cys291 and Cys455 are found to be unpaired, containing free sulfhydryl groups. The pattern of disulfide bridges is in agreement with that predicted from the X-ray crystallographic structure of canine myeloperoxidase (MPO) (Zeng, J., and Fenna, R. E. (1992) J. Mol. Biol. 226, 185-207) to be general for the class of mammalian peroxidases, including EPO, MPO, lactoperoxidase (LPO), and thyroid peroxidase (TPO). Of four candidate sites in EPO for attachment of glucosamine-based carbohydrate, Asn327 and Asn363 are occupied, whereas Asn700 and Asn708 are unsubstituted. Furthermore, a discrepancy in the literature regarding the sequence of residues 645-659 is resolved.     

The disulfide content of calf gamma-crystallin

The disulfide content of calf gamma-crystallin polypeptides has been investigated. The gamma-crystallin fraction of the soluble lens proteins was separated into five distinct polypeptides and characterized by isoelectric focusing, amino acid composition, and N-terminal sequence analysis to 25 residues. It has been demonstrated that 7 cysteines are present in gamma II, 4 to 5 cysteines in gamma IIIa, gamma IIIb, and gamma IV, and 6 cysteines in gamma I (beta s). Reduction of the total gamma-crystallin fraction with DTT resulted in an increase of approximately 1 to 1.5 mol of free SH per mole of protein. This increase in sulfhydryls was demonstrated to be contributed primarily by gamma II, the major polypeptide representing 50% of the total gamma-crystallin, which showed an increase of approximately 2.5 mol of sulfhydryl per mole of protein upon reduction. Insignificant disulfide content was present in gamma III and gamma IV and only a slight amount of disulfide was found in gamma I (beta s). The observed increase in sulfhydryl content upon reduction was not due to the presence of mixed disulfides of 2-mercaptoethanol, glutathione, or cysteine. The data are consistent with approximately 1 mol of intramolecular disulfide per mole of protein being present in gamma II. X-ray crystallography of gamma II has shown that the spatial location of Cys18 and Cys22 in the tertiary structure permits disulfide bond formation. Sequence analysis of the four major polypeptides of gamma-crystallin, gamma II, gamma IIIa, gamma IIIb, and gamma IV indicates that only gamma II has both Cys18 and Cys22. Cys18 is present in gamma IIIa, gamma IIIb, and gamma IV but Cys22 is replaced by His22. It is probable that the lack of disulfide in gamma IIIa, gamma IIIb, and gamma IV is due to the absence of Cys22.