Incompatibility Exhibited by Colicin Plasmids E1, E2, and E3 in Escherichia coli

Escherichia coli strains were made multiply colicinogenic for the colicin plasmids E1, E2, or E3 (Col E1, Col E2, or Col E3, respectively) by both a deoxyribonucleic acid transformation system and bacterial conjugation. The multiply colicinogenic bacteria constructed exhibited an immunity to the colicins produced by all the plasmids they carried and also produced colicins corresponding to all the plasmids they carried. An incompatibility was observed among the plasmids. In doubly colicinogenic cells where the presence of two plasmids was established, Col E2 was lost more frequently than Col E3. In triply colicinogenic cells, Col E1, Col E2, and Col E3 were lost, with Col E3 being lost least frequently. A significant reduction in the acquisition of a conjugationally transferred Col E1 plasmid by cells colicinogenic for Col E1 was demonstrated.     

Plasmid ColE3 specifies a lysis protein.

Tn5 insertion mutations in plasmid ColE3 were isolated and characterized. Several of the mutants synthesized normal amounts of active colicin E3 but, unlike wild-type colicinogenic cells, did not release measurable amounts of colicin into the culture medium. Cells bearing the mutant plasmids were immune to exogenous colicin E3 at about the same level as wild-type colicinogenic cells. All of these lysis mutants mapped near, but outside of, the structural genes for colicin E3 and immunity protein. Cells carrying the insertion mutations which did not release colicin E3 into the medium were not killed by UV exposure at levels that killed cells bearing wild-type plasmids. The protein specified by the lysis gene was identified in minicells and in mitomycin C-induced cells. A small protein, with a molecular weight between 6,000 and 7,000, was found in cells which released colicin into the medium, but not in mutant cells that did not release colicin. Two mutants with insertions within the structural gene for colicin E3 were also characterized. They produced no colicin activity, but both synthesized a peptide consistent with their map position near the middle of the colicin gene. These two insertion mutants were also phenotypically lysis mutants--they were not killed by UV doses lethal to wild-type colicinogenic cells and they did not synthesize the small putative lysis protein. Therefore, the lysis gene is probably in the same operon as the structural gene for colicin E3.     

Isolation and Characterization of a Mutant Colicin E2

Escherichia coli K-12 colicinogenic for Col E2 yielded a mutant, SK95, that carries a nonsense mutation in the colicin structural gene. A derivative of SK95 that carries an as yet unidentified suppressor mutation produces a colicin E2 that is temperature sensitive (TS). This mutant colicin kills sensitive cells at low temperature but not at high temperature; the colicin adsorbs to cells at high temperature but does not kill them unless the temperature is lowered. Unlike normal colicin E2, which adsorbs rapidly to cells, TS colicin E2 adsorbs slowly over a period of several hours. The biochemical target of colicin E2 is deoxyribonucleic acid (DNA). When acid solubilization of DNA was compared in cells treated with either TS or normal colicin E2, striking differences were observed. Cell killing and acid solubilization of DNA by colicin E2 were shown to be separable events under certain conditions. The results are discussed in relation to the mechanism of action of colicin E2.     

Mapping of colicin E2 and colicin E3 plasmid deoxyribonucleic acid EcoR-1-sensitive sites.

Colicin plasmids E2 and E3 (Col E2 and Col E3) deoxyribonucleic acid (DNA) has been shown to contain, respectively, two and three EcoR1 restriction endonuclease-sensitive sites. This was determined by measuring the DNA fragments generated after EcoR1 endonuclease treatment by agarose gel electrophoresis and electron microscopy. The structure of heteroduplex Col E2-col E3 DNA molecules formed from EcoR1-generated fragments permitted a localization of the EcoR1-sensitive sites on the plasmid chromosomes.     

Studies of colicin E1 plasmid functions by analysis of deletions and TnA insertions of the plasmid.

The further identification of regions of the colicin E1 plasmid that affect plasmid functions has been achieved by studying deletions and TnA insertions of the plasmid. Colicin production, colicin immunity, relaxation of plasmid deoxyribonucleic acid, and plasmid incompatibility functions have been examined. A strong correlation has been observed between the ability of colicin E1 plasmid deoxyribonucleic acid to be relaxed and the ability of that plasmid to be transferred by conjugation.     

Isolation, mapping, and examination of effects of TnA insertions in ColE1 plasmids.

Twelve TnA insertions of ColE1 deoxyribonucleic acid have been isolated and mapped by electron microscopic studies of heteroduplex molecules. Insertions only blocking the production of active colicin clustered in one region of the map, whereas insertions only blocking the expression of deoxyribonucleic acid nicking activity associated with the plasmid "relaxation complex" clustered in another region of the map. The location of one insertion that blocks both the expression of colicin immunity and the production of active colicin suggests that the expression of both characteristics are coordinately controlled.     

Detection of nonintegrated plasmid deoxyribonucleic acid in the folded chromosome of Escherichia coli: physiochemical approach to studying the unit of segregation.

Physiocochemical evidence presented indicates plasmid deoxyribonucleic acid (DNA) can associate with host chromosome without linear insertion of the former into the latter. This conclusion is based on the observation that covalently closed circular (CCC) plasmid DNA can cosediment with undegraded host chromosome in a neutral sucrose gradient. When F plus bacteria are lysed under conditions that preserve chromosome, approximately 90% of CCC F sex factor plasmid (about 1% of the total DNA) is found in folded chromosomes sedimenting at rates between 1,500 and 4,000s. The remaining 10% of the CCC F DNA sediments at the rate (80S) indicative of the free CCC plasmid form. Reconstruction experiments in which 80S, CCC F DNA is added to F plus or F minus bacteria before cell lysis show that exogenous F DNA does not associate with folded chromosomes. In F plus bacteria, F plasmid is harbored at a level of one or two copies per chromosomal equivalent. In bacteria producing colicin E1, the genetic determinant of this colicin, the Col E1 plasmid, is harbored at levels of 10 to 13 copies per chromosomal equivalent; yet, greater than 90% of these plasmids do not cosediment with the 1,800S species of folded chromosome. However, preliminary evidence suggests one or two Col E1 plasmids may associate with the 1,800S folded chromosome. Based on evidence presented in this and other papers, we postulate F plasmid can link to folded chromosome because the physicochemical structure of the plasmid resembles a supercoiled region of the chromosome and, therefore, is able to interact with the ribonucleic acid that stabilizes the folded chromosome structure. Implications of this model for F plasmid replication and segregation are discussed.     

Plasmid Replication and the Induced Synthesis of Colicins E1 and E2 in Escherichia coli

Induction of colicins E1 and E2 in Escherichia coli occurs when plasmid synthesis has been inhibited either by nalidixic acid or by lack of deoxyribonucleic acid polymerase I. Moreover, colicin E1 and E2 synthesis induced by mitomycin C and exposure to chloramphenicol is not associated with a large increase in circular plasmid deoxyribonucleic acid. The mean plasmid content of cells in populations having a low spontaneous frequency of colicin-producing cells because of growth at low temperature or because of the presence of recA(-) or crp(-) alleles, is not significantly different to that in wild-type cells grown at 37 C.     

Obligatory coupling of colicin release and lysis in mitomycin-treated Col+ Escherichia coli

Previous work has shown that Escherichia coli K12 strains carrying the small, high copy number ColE2-P9 plasmid produce large amounts of colicin and then lyse and release colicin when grown in broth culture containing mitomycin C. Strains carrying the larger, low copy number ColIa-CA53 plasmid produced much less colicin and did not lyse or discharge more than 15% of their colicin when grown under the same conditions. Naturally-occurring Col+ strains and E. coli K12 derivatives carrying different Col plasmids could be classified either as ColE2+-like or ColIa+-like according to whether or not they produced large amounts of colicin and lysed and discharged colicin when grown in the presence of mitomycin, and also by the size and presumed copy number of the Col plasmid they carried. Strains carrying multiple copies of the cloned colicin Ia structural gene produced large amounts of colicin but did not lyse or release colicin when grown in the presence of mitomycin. This result rules out the possibility that high level accumulation of colicin is sufficient to cause lysis. Conditions were sought under which colicin Ia could be released from the producing cells. It was found that mitomycin-treated cultures of strains carrying both ColE2 and ColIa plasmids released both colicins when they lysed, although colicin Ia release occurred later than colicin E2 release. It was also noted that colicin Ia-laden cells released their colicin when diluted into fresh culture medium.     

Discontinuous replication of colicin E1 plasmid deoxyribonucleic acid.

The plasmid pML 21, which was found to contain approximately 49% of the Col E1 genome was used to determine the template origin of single-stranded deoxyribonucleic acid (DNA) fragments (4 to 32% of the Col E1 units length) associated with Col E1 dna replicative intermediates. The results of DNA hybridization competition experiments indicate that the single-stranded fragments derive from the full length of the Col E1 DNA template as expected for Okazaki fragments and the plasmid pML 21 contains the replication origin of Col E1 DNA.     

Physical and genetic analysis of the ColD plasmid.

The plasmid ColD-CA23, a high-copy-number plasmid of 5.12 kilobases, encodes colicin D, a protein of approximately 87,000 daltons which inhibits bacterial protein synthesis. Colicin D production is under the control of the Escherichia coli SOS regulatory system and is released to the growth medium via the action of the lysis gene product(s). A detailed map of the ColD plasmid was established for 10 restriction enzymes. Using in vitro insertional omega mutagenesis and in vivo insertional Tn5 mutagenesis, we localized the regions of the plasmid responsible for colicin D activity (cda), for mitomycin C-induced lysis (cdl), and for colicin D immunity (cdi). These genes were all located contiguously on a 2,400-base-pair fragment similar to a large number of other Col plasmids (A, E1, E2, E3, E8, N, and CloDF). The ColD plasmid was mobilizable by conjugative transfer by helper plasmids of the IncFII incompatibility group, but not by plasmids belonging to the groups IncI-alpha or IncP. The location of the mobilization functions was determined by deletion analysis. The plasmid needs a segment of 400 base pairs, which is located between the mob genes and the gene for autolysis, for its replication.     

Colicin E2 production and release by Escherichia coli K12 and other Enterobacteriaceae

Previous work has shown that Escherichia coli K12 ColE2+ cells undergo a form of partial lysis and exhibit increases in lysophosphatidylethanolamine (lysoPE) and free fatty acid content due to activation of phospholipase A when induced to produce and release colicin E2. The increase in lysoPE content was assumed to be essential for efficient colicin release. These same characteristics are also presented by some natural ColE2+ isolates, and by other representatives of the Enterobacteriaceae after transformation with derivatives of a ColE2 plasmid. However, Salmonella typhimurium strains carrying ColE2 plasmids released colicin without partial lysis and without increasing their lysoPE content. A previously undetected minor phospholipid, which appeared in these and other strains only when they were induced to produce colicin, may be an important factor in colicin release. In ColE2+ E. coli K12, production of this new lipid was dependent on phospholipase A activation following expression of the ColE2 lysis gene. Some other ColE2+ strains did not respond to induction of colicin production in the same way as ColE2+ E. coli K12. These strains were less sensitive to inducer (mitomycin C) or unable to produce increased amounts of colicin in response to induction, or unable to degrade colicin once it was released. In general, the results suggest that colicin release occurs by the same or similar processes in the various strains tested, and support the continued use of E. coli K12 as the model strain for studying the mechanisms of colicin release.     

Effect of base substitutions in the colicin E1 gene on colicin E1 export and bacteriocin activity

Summary Base substitutions have been introduced into the segment of the colicin E1 gene corresponding to the polypeptide region between the 404th and the 502nd residues which was considered to participate in colicin E1 export and bacteriocin activity. The methods used were in vitro localized mutagenesis with sodium bisulphite and in vivo mutagenesis using either nitrosoguanidine or ethyl methane sulphonate. Cells carrying mutagenized plasmids were screened by their inability to form a clear zone on a lawn of colicin E1 sensitive cells. Mutation sites were determined from the nucleotide sequence analysis and the altered amino acid residues were reduced. The mutant proteins were analysed for their ability to be exported to the periplasmic space and for their bacteriocin activity. Out of eight mutants obtained, three had a single amino acid replacement. Mutant proteins that had Ser and Glu in place of Pro-462 and Gly-502, respectively, showed a decrease in both the export and the bacteriocin activity. A mutant protein having Arg in place of Gly-439 showed a decrease only in the bacteriocin activity. These results suggest that the target region of colicin E1 contributes to the export as well as the bacteriocin activity but the two functions are supported in part by different amino acid residues of the protein.     

Mitomycin C-induced expression of trpA of Salmonella typhimurium inserted into the plasmid ColE1.

EcoRI endonuclease digestion of the deoxyribonucleic acid of a phi80 transducing phage carrying the entire tryptophan (trp) operon of Salmonella typhimurium (phi80 S.t.trpE-A) yielded a 4.3 X 10(6)-dalton fragment containing intact trpE, trpD, and trpC and a 3.35 X 10(6)-dalton fragment containing intact trpA. The trpA fragment inserted into EcoRI-cleaved plasmids ColE1 and CR1 was expressed regardless of its orientation of insertion. Mitomycin C, a compound that induces colicin E1 production in ColE1-containing bacteria, stimulated tryptophan synthetase alpha production in cells containing ColE1-TRPA plasmids with the trpA fragment inserted in one orientation but not the other. We conclude that in the inducible plasmids trpA can be expressed from the colicin E1 promoter.     

Studies of colicin induction with an imm- col+ mutant of the plasmid colicin E1.

Summary A mutant of a derivative of the colicin E1 plasmid has been isolated that does not confer immunity to colicin E1 on its host (imm^-) although it is still capable of producing colicin (col⁺). Cells carrying the col⁺, imm^- plasmid are capable of forming colonies and grow best in liquid culture in the presence of trypsin. The induction of colicin synthesis by ultraviolet light has been analysed using this mutant plasmid. The results suggest that a) the expression of the col⁺ gene may be delayed for many generations after the inducing stimulus, b) although induced cells are usually killed they can reproduce and c) the capacity to produce colicin can be propagated and segregated into the progeny of an induced cell.     

Isolation and genetic characterizaion of Escherichia coli K-12 mutations affecting bacteriophage T5 restriction by the ColIb plasmid.

A mutant derivative of Escherichia coli K-12 has been isolated which is permissive for bacteriophage T5 infection even when harboring a wild-type ColIb plasmid. The fully permissive phenotype was the result of two mutations that are located near the rpsL-rpsE region on the E. coli chromosome and are recessive to the wild-type alleles. These mutations had little or no effect on induction of colicin synthesis and did not affect the expression of antibiotic resistance by the resistance plasmids R64drd11 or R1drd19. Cells harboring the mutant alleles grew more slowly than isogenic wild-type derivatives in either minimal or complete media.     

Colicinogenic mutant of ColE1 plasmid that fails to confer immunity to colicin E1.

Insertion of the ampicillin transposon (Tn3) into ColE1 DNAs causes various mutations in the plasmids. Escherichia coli K-12 cells carrying one of these mutants showed novel properties; they were sensitive to colicin E1 and were able to produce active colicin E1. The site and the orientation of Tn3 insertion in this mutant ColE1 DNA were determined by heteroduplex analysis and by enzymatic digestion with restriction endonucleases. The potential usefulness of this mutant ColE1 DNA as a cloning vehicle is discussed.     

Trehalose Metabolism in Germinating Spores of Streptomyces hygroscopicus

Catenated deoxyribonucleic acid molecules of colicin factor E1 (Col E1) were found with nearly equal frequency in minicells derived from Escherichia coli strain P678-54 recA(+) (Col E1) and P678-54 recA(-) (Col E1). The result suggests that the recombination function controlled by the recA gene does not influence the formation of catenated Col E1.     

Mechanism of colicin E3 production in strains harboring wild-type or mutant plasmids.

As previously reported by others, more than 90% of the colicin E3 synthesized soon after induction of colicinogenic bacteria was found to be cell bound, about half of it being in a salt-extractable state at the cell surface. Evidence is presented that the colicin molecules remain preferentially bound to the cell which produced them, rather than being secreted and randomly distributed in the cell population. Secretion of colicin E3 may in fact never occur, all or most of the colicin found free in the medium perhaps being released during lysis of the producing cells long after induction. Among 19 mutant plasmids selected on the basis of their inability to produce an active colicin, only 3 were found to code for a protein which although it lacked any bactericidal activity, had the same molecular weight as wild-type colicin E3 and displayed a reaction of immunological identity with it. These three inactive colicins fail to be exported to the cell surface and seem to be blocked at some intermediate stage in the export process.     

Mutations which affect the structure and activity of colicin E3.

Among 69 ColE3 mutant plasmids selected on the basis of their inability to produce an active colicin, seven (cop-1 to cop-7) were found to bear a mutation affecting the structural gene for colicin. Three of these (cop-1, cop-2 and cop-3) lead to the production of an inactive colicin molecule which has the same molecular weight as wild-type colicin E3 (67,000). These three inactive colicins are still able to interact with the outer membrane receptor. The cop-1 protein retained the ability to inhibit protein synthesis in vitro and therefore seems specifically affected in it ability to penetrate the cell envelope. The cop-2 and cop-3 proteins lost the ability to inhibit protein synthesis in vitro, and activity which is normally associated with the C-terminal part of the colicin molecule. On the basis of this and further evidence, it is suggested that the cop-2 and cop-3 mutations affect the structure of the C-terminal part of the colicin molecule. The other four mutations (cop-4 to cop-7) lead to the production of colicin-related polypeptides of lower molecular weight (29,000 to 45,000) which display a reaction of partial immunological identity with wild-type colicin. These four polypeptides are unable to interact with the cell surface receptor. Three of these mutants are shown to carry a nonsense mutation.