Estimation of proteins in the presence of polyethylenimine

Polyethylenimine (PEI) interferes strongly in all commonly employed protein estimation assays. Here, a strategy to remove this interference is developed. Polyethylenimine is selectively removed by adsorption from a mixture containing PEI and lysozyme using carboxymethyl-cellulose, a cation-exchange resin between an ionic strength of 0.35–1 M (pH 6.0), conditions under which lysozyme remains in solution and can be accurately estimated.     

Functional binary micropattern of hyperbranched poly(ether amine) (hPEA-AN) network and poly(ether amine) (PEA) brush for recognition of guest molecules

A binary micropattern of anthracene-contained hyperbranched poly(ether amine) (hPEA-AN) network and poly(ether amine) (PEA) brush on gold surface was developed and explored. First, a micropatterned hPEA-AN network array on gold surface was fabricated by photolithography via photodimerization of anthracene moieties, and a PEA brush was subsequently immobilized on the remaining free gold surface areas by chemical adsorption of thiol groups. The patterned hPEA-AN network exhibits selectivity with respect to the adsorption of hydrophilic dyes: Methyl orange is strongly adsorbed, but rhodamine 6G is not, as indicated by the fluorescence response. The PEA brush domain exhibits excellent protein adsorption repellency, whereas the hPEA-AN network layer readily adsorbs protein. These characteristics make the binary hPEA-AN network and PEA brush array sensitive to different kinds of dyes and proteins, which open up pathways to potential applications as microsensors, biochips, and bioassays.     

Selective adsorption of endotoxin inside a polycationic network of flat-sheet microfiltration membranes

For the removal of remaining amounts of endotoxin, sorbents with high selectivity for endotoxin are required. Typically, particulate sorbents with positively charged ligands, such as histidine, polymyxin B poly-L-lysine and poly(ethyleneimine) (PEI), display moderate to high removal efficiencies in an environment of low ionic strength. It was found that polycationic ligands are most suitable to meet an endotoxin concentration which is below the threshold level required for parenteralia. Furthermore, protein recoveries close to 100% are obtained if the decontamination is performed at a pH close to the pI of acidic proteins. The high selectivity is probably caused by complexation of the polycationic ligand with the polyanionic endotoxin, leading to interactions with KD < 10(-9) M using PEI and assuming M(r) = 10 kDa for monomeric endotoxin; with BSA the same ligand reveals only KD = 4 x 10(-6) M. Using polymer-coated microfiltration membranes, immobilization of positively charged ligands leads to membrane adsorbers which are generally superior to chromatographic adsorbers and allow faster processing. Since immobilization takes place at polymer chains, low-molecular-weight ligands mainly add positive charges to the hydrophilic polymer. Consequently, membrane adsorbers with low-molecular-weight ligands, even DEAE, demonstrate similar selectivity to PEI or poly-L-lysine.     

Surface engineering of poly(DL-lactide) via electrostatic self-assembly of extracellular matrix-like molecules

We report the development of new biomacromolecule coatings on biodegradable biomaterials based on electrostatic assembly of extracellular matrix-like molecules. Poly(ethylene imine) (PEI) was employed to engineer poly(dl-lactide) (PDL-LA) substrate to obtain a stable positively charged surface. An extracellular matrix- (ECM-) like biomacromolecule, gelatin, was selected as the polyelectrolyte to deposit on the activated PDL-LA substrate via the electrostatic assemble technique. The extracellular matrix-like multilayer on the PDL-LA substrate was investigated by attenuated total reflection (ATR-FTIR), X-ray photoelectron spectrscopy (XPS), contact angle, and atomic force microscopy (AFM). The gradual buildup of the protein layer was investigated by UV-vis spectra, and it was further given a quantitative analysis of the protein layer on the PDL-LA substrate via the radioiodination technique. The stability of the protein layer under aqueous condition was also tested by the radiolabeling method. Chondrocyte was selected as the model system for testing the cell behavior and morphology on modified PDL-LA substrates. The chondrocyte test about cell attachment, proliferation, cell activity and cell morphology by SEM, and confocal laser scanning microscopy (CLSM) investigation on extracellular matrix-like multilayer modified PDL-LA substrate was shown to promote chondrocyte attachment and growth. Comparing conventional coating methods, polyelectrolyte multiplayers are easy and stable to prepare. It may be a good choice for the modification of 3-D scaffolds used in tissue engineering. These very flexible systems allow broad medical applications for drug delivery and tissue engineering.     

Characterization of poly(ADP-ribosyl)ated domains of rat pachytene chromatin.

Poly(ADP-ribosyl)ation of nuclear proteins was several-fold higher in the pachytene spermatocytes than in the premeiotic germ cells of the rat. Among the histones of the pachytene nucleus, histone subtypes H2A, H1 and H3 were poly(ADP-ribosyl)ated. Based on the immunoaffinity fractionation procedure of Malik, Miwa, Sugimara & Smulson [(1983) Proc. Natl. Acad. Sci. U.S.A. 80, 2554-2558] we have fractionated DNAase-II-solubilized chromatin into poly(ADP-ribosyl)ated chromatin (PAC) and non-poly(ADP-ribosyl)ated chromatin (non-PAC) domains on an anti-[poly(ADP-ribose)] IgG affinity matrix. Approx. 2.5% of the pachytene chromatin represented the PAC domains. A significant amount of [alpha-32P]dATP-labelled pachytene chromatin (labelled in vitro) was bound to the affinity matrix. The DNA of pachytene PAC domains had internal strand breaks, significant length of gaps and ligatable ends, namely 5'-phosphoryl and 3'-hydroxyl termini. On the other hand, the PAC domains from 18 h regenerating liver had very few gaps, if any. The presence of gaps in the pachytene PAC DNA was also evident from thermal denaturation studies. Although many of the polypeptides were common to the PAC domains of both pachytene and regenerating liver, the DNA sequences associated with these domains were quite different. A 20 kDa protein and the testis-specific histone H1t were selectively enriched in the pachytene PAC domains. The pachytene PAC domains also contained approx. 10% of the messenger coding sequences present in the DNAase-II-solubilized chromatin. The pachytene PAC domains, therefore, may represent highly enriched DNA-repair domains of the pachytene nucleus.     

Recovery of a charged-fusion protein from cell extracts by polyelectrolyte precipitation

Beta-galactosidase served as a model system to explore the feasibility of enhancing the selectivity of a low-cost, easily scaled separation method-precipitation. Enhanced selectivity was sought by fusing the enzyme with polypeptide tails including 5 and 11 aspartates. The unfused protein could not be selectively removed from the Escherichia coli cell extract by precipitation with polyethylenimine (PEI), but the longest fusion could be selectively removed. The presence of nucleic acids limited the purification attainable. Pretreatment with nuclease followed by diafiltration resulted in an extract from which the same fusion could be precipitated with greater than fivefold enrichment, while the untailed enzyme remained unenriched by the same precipitation step. Selectivity is attributed to the binding strength of the polyanionic tails to the polycationic PEI.     

Layer-by-layer assembly to modify poly(l-lactic acid) surface toward improving its cytocompatibility to human endothelial cells

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. Positively charged chitosan was then deposited onto the aminolyzed poly(l-lactic acid) (PLLA) membrane surface in a layer-by-layer assembly manner using poly(styrene sulfonate, sodium salt) (PSS) as a negatively charged polyelectrolyte. The layer-by-layer deposition process of PSS and chitosan was monitored by UV-vis absorbance spectroscopy, energy transfer by fluorescence spectroscopy, and advancing contact angle measurements. The existed chitosan obviously improved the cytocompatibility of PLLA to human endothelial cells. The cell attachment, activity, and proliferation on the PLLA membranes assembled with three or five bilayers of PSS/chitosan with chitosan as the outermost layer were better than those with one bilayer of PSS/chitosan or the control PLLA. The cells also showed morphology of an elongated shape with abundant cytoplasm, and a confluent cell layer was reached after being cultured for 4 days. Measurement of von Willebrand factor secreted by these endothelial cells (ECs) verified the endothelial function. Hence, better ECs compatible PLLA were produced.     

Investigation of Bovine Serum Albumin (BSA) Attachment onto Self-Assembled Monolayers (SAMs) Using Combinatorial Quartz Crystal Microbalance with Dissipation (QCM-D) and Spectroscopic Ellipsometry (SE)

Understanding protein adsorption kinetics to surfaces is of importance for various environmental and biomedical applications. Adsorption of bovine serum albumin to various self-assembled monolayer surfaces including neutral and charged hydrophilic and hydrophobic surfaces was investigated using in-situ combinatorial quartz crystal microbalance with dissipation and spectroscopic ellipsometry. Adsorption of bovine serum albumin varied as a function of surface properties, bovine serum albumin concentration and pH value. Charged surfaces exhibited a greater quantity of bovine serum albumin adsorption, a larger bovine serum albumin layer thickness, and increased density of bovine serum albumin protein compared to neutral surfaces at neutral pH value. The quantity of adsorbed bovine serum albumin protein increased with increasing bovine serum albumin concentration. After equilibrium sorption was reached at pH 7.0, desorption of bovine serum albumin occurred when pH was lowered to 2.0, which is below the isoelectric point of bovine serum albumin. Our data provide further evidence that combinatorial quartz crystal microbalance with dissipation and spectroscopic ellipsometry is a sensitive analytical tool to evaluate attachment and detachment of adsorbed proteins in systems with environmental implications.     

Selective separation of amino acids with a charged inorganic nanofiltration membrane: effect of physicochemical parameters on selectivity

A charged organic-inorganic nanofiltration (NF) membrane prototype was used to separate a mixture of nine amino acids (AA) on the basis of differential electrostatic interactions with the membrane because, for a given pH, some of them were positively charged, some were negative, and some were zwitterions. Effect of pH, amino acid concentration (C(r)), and added ionic strength ([NaCI]) on the process selectivity was studied. A global statistical study revealed that pH was the dominant parameter regarding fractionation. C(r) and [NaCI] had a weaker effect, but the ratio C(r)/[NaCI] demonstrated a pronounced effect on system selectivity. Two split-ups of the mixture were obtained at pH 2 and at pH 12, for a 1-g/L total AA concentration and a C(r)/[NaCI] ratio of 0.16. Under these conditions, the differences in transmissions between basic and acid AA were higher than 70%. Interpretation of the results according to the Donnan theory allows us to foresee the potentialities of charged nanofiltration membranes for the fractionation of a complex mixture, such as peptidic hydrolysate to streams containing peptides and amino acids having different isoelectric points. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54: 291-302, 1997.     

Cholesterol biosensors prepared by layer-by-layer technique

The analysis of formation, deposition and characterization of cholesterol oxidase (COX) layer-by-layer films were performed. Initially, a layer of polyanion, poly(styrene sulfonate) (PSS) was adsorbed followed by a layer of polycation, poly(ethylene imine) (PEI) on each solid substrate from aqueous solutions. The alternating layers were formed by consecutive adsorption of polycations (PEI) and negatively charged proteins (COX) and cholesterol esterase (CE). A strong interaction between protein and polyelectrolyte improves the stability of the alternating multilayer; however, it can change a native protein conformation and impair the protein activity. The PSS/PEI/COX, PSS/PEI/COX/PEI/CE, PSS/PEI/COX-CE/PEI etc. layered structures were prepared on the surface of a platinum electrode, ITO coated glass plate, quartz crystal microbalance, quartz plates, mica and silicon substrates. Optical and gravimetric measurements based on an ultraviolet–visible absorption spectroscopy and a quartz crystal microbalance revealed that the enzyme multilayers thus prepared consist of molecular layered of the proteins. The surface morphology of such bilayer films was investigated by using atomic force microscopy. The electrochemical redox processes of the enzyme-layered films deposited either on platinum or ITO coated glass plate were investigated. The response current of cholesterol oxidase electrode with concentration of cholesterol was investigated at length.     

Coating and selective deposition of nanofilm on silicone rubber for cell adhesion and growth

A recently developed method for surface modification, layer-by-layer (LbL) assembly, has been applied to silicone, and its ability to encourage endothelial cell growth and control cell growth patterns has been examined. The surfaces studied consisted of a precursor, with alternating cationic polyethyleneimine (PEI) and anionic sodium polystyrene sulfonate (PSS) layers followed by alternating gelatin and poly-d-lysine (PDL) layers. Film growth increased linearly with the number of layers. Each PSS/PEI bilayer was 3 nm thick, and each gelatin/PDL bilayer was 5 nm thick. All layers were more hydrophilic than the unmodified silicone rubber surface, as determined from contact angle measurements. The contact angle was primarily dictated by the outermost layer. Of the coatings studied, gelatin was the most hydrophilic. A film of (PSS/PEI)₄/(gelatin/PDL)₄/ gelatin was highly favorable for cell adhesion and growth, in contrast to films of (PSS/PEI)₈ or (PSS/PEI)₈/PSS. Cell growth patterns were successfully controlled by selective deposition of microspheres on silicone rubber, using microcontact printing with a silicone stamp. Cell adhesion was confined to the region of microsphere deposition. These results demonstrate that the LbL self-assembly technique provides a general approach to coat and selectively deposit films with nanometer thickness on silicone rubber. Furthermore, they show that this method is a viable technique for controlling cellular adhesion and growth.     

NMR imaging of the diffusion of water at 310 K into semi-IPNs of PEM and poly(HEMA-co-THFMA) with and without chlorhexidine diacetate

Magnetic resonance imaging has been used to monitor the diffusion of water at 310 K into a series of semi-IPNs of poly(ethyl methacrylate), PEM, and copolymers of 2-hydroxyethyl methacrylate, HEMA, and tetrahydrofurfuryl methacrylate, THFMA. The diffusion was found to be well described by a Fickian kinetic model in the early stages of the water sorption process, and the diffusion coefficients were found to be slightly smaller than those for the copolymers of HEMA and THFMA, P(HEMA-co-THFMA), containing the same mole fraction of HEMA in the matrix. A second stage sorption process was identified in the later stage of water sorption by the PEM/PTHFMA semi-IPN and for the systems containing a P(HEMA-co-THFMA) component with a mole fraction HEMA of 0.6 or less. This was characterized by the presence of water near the surface of the cylinders with a longer NMR T(2) relaxation time, which would be characteristic of mobile water, such as water present in large pores or surface fissures. The presence of the drug chlorhexidine in the polymer matrixes at a concentration of 5.625 wt % was found not to modify the properties significantly, but the diffusion coefficients for the water sorption were systematically smaller when the drug was present.     

Ruthenium(II) tris(bipyridine)-centered poly(ethylenimine) for gene delivery

Ruthenium(II) tris(bipyridine)-centered poly(ethylenimine) (Ru PEI) was synthesized via acid hydrolysis of Ru tris(bipyridine)-centered poly(2-ethyl-2-oxazoline) (Ru PEOX), and the luminescence, DNA entrapment, and transfection efficiencies were evaluated. Emission maxima for Ru PEI samples are red-shifted compared to Ru PEOX precursors, and the luminescence lifetimes are shorter in both methanol and aqueous solutions. Slower oxygen quenching of Ru PEOX and Ru PEI luminescence versus [Ru(bpy)3]Cl2 (bpy = bipyridine) is attributed to polymer shielding effects. Ru PEI luminescence is similar in the presence and absence of DNA. Ru PEI (7900 Da) and linear PEI (L-PEI; 22,000 Da) fully entrapped DNA (5.4 kb; pcDNA) at an N/P ratio of 2. LNCaP prostate cancer cells were transfected with a plasmid encoding for green fluorescent protein using Ru PEI and L-PEI vectors for comparison. For N/P = 48, the transfection efficiency for Ru PEI was approximately 50% relative to that of L-PEI.     

Physiochemical properties of low and high molecular weight poly(ethylene glycol)-grafted poly(ethylene imine) copolymers and their complexes with oligonucleotides

Inefficient delivery of antisense oligonucleotides (AOs) to target cell nuclei remains as the foremost limitation to their usefulness. Copolymers of cationic poly(ethylene imine) (PEI) and poly(ethylene glycol) (PEG) have been well-studied for delivery of plasmids. However, the properties of PEG-PEI-AO polyplexes have not been comprehensively investigated. Therefore, we synthesized a series of PEG-PEI copolymers and evaluated their physiochemical properties alone and when complexed with AO. The M(w) of PEG was found to be the main determinant of polyplex size, via its influence on particle aggregation. DLS measurements showed that when PEG5000 was grafted to PEI2K and PEI25K, polyplex diameters were extremely small (range 10-90 nm) with minimal aggregation. In contrast, when PEG550 was grafted to PEI2K and PEI25K, polyplexes appeared as much larger aggregates (approximately 250 nm). As expected, the surface charge (zeta potential) was higher for polyplexes containing PEI25K than those containing PEI2K, but decreased with increased levels of PEG grafting. Surprisingly, within the physiological range (pH 7.5-5), the buffering capacity of all copolymers was nearly equivalent to that of unsubstituted PEI2K or PEI25K, and was barely influenced by PEGylation. The stability of polyplexes was evaluated using a heparin polyanion competition assay. Unexpectedly, polyplexes containing PEI2K showed stability equal to or greater than that of PEI25K polyplexes. The level of PEG grafting also had a dramatic effect on polyplex stability. The relationships established between molecular formulations and polyplex size, aggregation, surface charge, and stability should provide a useful guide for future studies aimed at optimizing polymer-mediated AO delivery in cell and animal studies. A summary of the relationships between polyplex structures and recent studies of their transfection capacity is provided.     

Interaction of heme proteins with poly(propyleneimine) dendrimers in layer-by-layer assembly films under different pH conditions

With the isoelectric point at pH 7.4, hemoglobin (Hb) has net positive surface charges at pH 5.0 and overall negative charges at pH 9.0, and is essentially neutral at pH 7.0. The fifth-generation poly(propyleneimine) (PPI) dendrimer is usually positively charged in aqueous solution. The {PPI/Hb}n films under different pH conditions have been successfully fabricated on various solid surfaces by the layer-by-layer assembly technique, and the growth of films was monitored by ultraviolet-visible (UV-vis) spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV). Not only was the negatively charged Hb at pH 9.0 alternately adsorbed with positively charged PPI onto solid substrates by electrostatic attraction between them, but the positively charged Hb at pH 5.0 was also successfully assembled with like charged PPI into layer-by-layer {PPI/Hb(pH 5.0)}n films. For the latter, the localized electrostatic interaction or the charge reversal of proteins on PPI surface may be the main driving force. For {PPI/Hb(pH 7.0)}n films, however, the hydrophobic/hydrophilic interaction may play a more important role in the assembly, making the amount of adsorbed Hb even less than that of {PPI/Hb(pH 5.0)}n films. For comparison, negatively charged catalase (Cat) at pH 8.0 was used to assemble layer-by-layer films with positive PPI, but {PPI/Cat}n films showed quite different properties from {PPI/Hb}n films. UV-vis and infrared (IR) spectroscopy, QCM, ellipsometry, and voltammetry were utilized to characterize the {PPI/protein}n films. The results suggest that the proteins in the multilayer films retain their near-native structure and display good voltammetric response for heme Fe(III)/Fe(II) redox couples at underlying pyrolytic graphite (PG) electrodes. Electrocatalysis of oxygen and hydrogen peroxide based on direct electrochemistry of heme proteins at {PPI/protein}n film electrodes was also demonstrated.     

Surface modification of poly(L-lactic acid) membrane via layer-by-layer assembly of silver nanoparticle-embedded polyelectrolyte multilayer

The improvement of hydrophilicity, antibacterial activity, hemocompatibility, and cytocompatibility of poly(L-lactic acid) (PLLA) membrane was developed via polyelectrolyte multilayer (PEM) immobilization. Colloidal silver nanoparticles were prepared by using dextran sulfate (DS) as a stabilizer to precede chemical reduction by dextrose. The polysaccharide PEMs, including chitosan (CH) and dextran sulfate (DS)-stabilized silver nanosized colloid (DSS), were successfully deposited on the aminolyzed PLLA membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of PLLA membranes decreased with PEMs grafting layers and reached a steady value after four bilayers of coating, hence suggesting that full coverage was achieved. The PLLA-PEM membranes with DSS as the outermost layer could resist platelet adhesion and human plasma fibrinogen (HPF) adsorption, while prolonging the blood coagulation time. The PLLA-PEM membranes could possess antibacterial activity against Methicilin-resistant Staphylococus aureus (MRSA). In addition, the proliferation and viability of human endothelial cells (ECs) on PLLA-PEM membranes could be significantly improved. Overall results demonstrated that such a fast, easy processing and shape-independent method for an antithrombogenic coating can be used for applications in hemodialysis devices.     

Precipitation of nucleic acids with poly(ethyleneimine).

Removal of nucleic acids from cell extracts is a common early step in downstream processing for protein recovery. We report on the precipitation of nucleic acids from a homogenate of Saccharomyces cerevisiae by addition of the cationic polyelectrolyte poly(ethyleneimine) (PEI), focusing on the effect of PEI dosage on particle size, protein loss, and extent of nucleic acid removal in both batch and continuous mode. Better than 95% removal of nucleic acids from yeast homogenates was achieved by means of precipitation with PEI with protein losses of approximately 15% with or without previous removal of cell debris. The coprecipitated protein is predominately large molecular weight material and exhibits both low and high isoelectric points. Such treatment does not aggregate the cell debris; size distribution of the precipitated particles from a continuous precipitator is very similar to that for protein precipitation.     

Recognition and selective binding of DNA by ionenes of different charge density

The ability of aliphatic ionenes to recognize and bind DNA or poly(methacrylic acid) (PMA) in the equimolar mixture of these polyanions was studied by fluorescence quenching technique. Within a particular system, the selectivity of competitive interactions was shown to be determined by a component with the lowest degree of polymerization (DP). Ionene polycations with lowest DP values did not exhibit pronounced selectivity in binding DNA or PMA with higher values of DP. Increase in ionene DP resulted in a steady increase in selectivity of interaction and ultimately in almost exclusive binding of one of the two polyanions. The ability of the ionene to recognize and bind DNA in the mixture of polyanions was shown not to correlate with the affinity of the ionene to DNA in their binary mixture. Although ionenes with a higher charge density exhibited preferential binding to PMA, the ionenes with the lowest charge density selectively bound DNA.     

pH effects on the adsorption of saxitoxin by powdered activated carbon

Increasing occurrence of cyanotoxins in surface waters worldwide pose significant problems, including those for drinking water utilities. In this study, the removal of saxitoxin (STX) from three different powdered activated carbons (PACs) was studied. STX is one of the most toxic paralytic shellfish toxins (PSTs), albeit not the most prevalent. The results showed that a wide range of non-electrostatic and electrostatic interactions appeared to play a role in the sorption of STX on PAC, depending on the solution pH, NOM concentration, and other factors. A bituminous coal-based PAC, that was studied in greatest detail, showed a trend of increasing sorption capacity for STX with increasing pH. NOM appeared to significantly inhibit adsorption when the pH was nearly neutral (e.g. 7.05), yet it had less effect at higher pH levels of 8.2 and 10.7.     

Adsorption behavior and adhesive properties of biopolyelectrolyte multilayers formed from cationic and anionic starch

Cationic starch (D.S. 0.065) and anionic starch (D.S. 0.037) were used to form biopolyelectrolyte multilayers. The influence of the solution concentration of NaCl on the adsorption of starch onto silicon oxide substrates and on the formation of multilayers was investigated using stagnation point adsorption reflectometry (SPAR) and quartz crystal microbalance with dissipation (QCM-D). The wet adhesive properties of the starch multilayers were examined by measuring pull-off forces with the AFM colloidal probe technique. It was shown that polyelectrolyte multilayers (PEM) can be successfully constructed from cationic starch and anionic starch at electrolyte concentrations of 1 mM NaCl and 10 mM NaCl. The water content of the PEMs was approximately 80% at both electrolyte concentrations. However, the thickness of the PEMs formed at 10 mM NaCl was approximately twice the thickness formed at 1 mM NaCl. The viscoelastic properties of the starch PEMs, modeled as Voigt elements, were dependent on the polyelectrolyte that was adsorbed in the outermost layer. The PEMs appeared to be more rigid when capped by anionic starch than when capped by cationic starch. The wet adhesive pull-off forces increased with layer number and were also dependent on the polyelectrolyte adsorbed in the outermost layer. Thus, starch PEM treatment has a large potential for increasing the adhesive interaction between solid substrates to levels higher than can be reached by a single layer of cationic starch.